ARM: DT: stm32f7: add gpio device tree nodes
Also created alias for gpios for stm32f7 discovery board. Based on these
aliases, it would be possible to get gpio devices by sequence.
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
diff --git a/arch/arm/dts/stm32f746.dtsi b/arch/arm/dts/stm32f746.dtsi
index e9fd6f4..865d5cf 100644
--- a/arch/arm/dts/stm32f746.dtsi
+++ b/arch/arm/dts/stm32f746.dtsi
@@ -114,6 +114,117 @@
u-boot,dm-pre-reloc;
pins-are-numbered;
+ gpioa: gpio@40020000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x0 0x400>;
+ clocks = <&rcc 0 0>;
+ st,bank-name = "GPIOA";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpiob: gpio@40020400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x400 0x400>;
+ clocks = <&rcc 0 1>;
+ st,bank-name = "GPIOB";
+ u-boot,dm-pre-reloc;
+ };
+
+
+ gpioc: gpio@40020800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x800 0x400>;
+ clocks = <&rcc 0 2>;
+ st,bank-name = "GPIOC";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpiod: gpio@40020c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0xc00 0x400>;
+ clocks = <&rcc 0 3>;
+ st,bank-name = "GPIOD";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpioe: gpio@40021000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x1000 0x400>;
+ clocks = <&rcc 0 4>;
+ st,bank-name = "GPIOE";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpiof: gpio@40021400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x1400 0x400>;
+ clocks = <&rcc 0 5>;
+ st,bank-name = "GPIOF";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpiog: gpio@40021800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x1800 0x400>;
+ clocks = <&rcc 0 6>;
+ st,bank-name = "GPIOG";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpioh: gpio@40021c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x1c00 0x400>;
+ clocks = <&rcc 0 7>;
+ st,bank-name = "GPIOH";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpioi: gpio@40022000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x2000 0x400>;
+ clocks = <&rcc 0 8>;
+ st,bank-name = "GPIOI";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpioj: gpio@40022400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x2400 0x400>;
+ clocks = <&rcc 0 9>;
+ st,bank-name = "GPIOJ";
+ u-boot,dm-pre-reloc;
+ };
+
+ gpiok: gpio@40022800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "st,stm32-gpio";
+ reg = <0x2800 0x400>;
+ clocks = <&rcc 0 10>;
+ st,bank-name = "GPIOK";
+ u-boot,dm-pre-reloc;
+ };
+
usart1_pins_a: usart1@0 {
pins1 {
pinmux = <STM32F746_PA9_FUNC_USART1_TX>;