net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers
The KS8721BL and KSZ9021 PHYs are software-incompatible, yet they
share the same ID. Drivers for bothe PHYs cannot safely coexist, so
the solution was to use #ifdefs to select between the two drivers.
As a result KSZ9031, which has a unique ID, is now caught in the
crossfire. Unless CONFIG_PHY_MICREL_KSZ9031 is defined, the KSZ9031
will not function properly, as some essential configuration code is
ifdef'd-out.
To prevent such situations, move the KSZ9000 drivers to a separate
file, and place them under a separate Kconfig option. While it is
possible to enable both KSZ8000 and KSZ9000 drivers at the same time,
the assumption is that it is highly unlikely for a system to contain
both a KSZ8000 and a KSZ9000 PHY, and that only one of the drivers
will be enabled at any given time.
Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
diff --git a/drivers/net/phy/micrel_ksz90x1.c b/drivers/net/phy/micrel_ksz90x1.c
new file mode 100644
index 0000000..785143d
--- /dev/null
+++ b/drivers/net/phy/micrel_ksz90x1.c
@@ -0,0 +1,364 @@
+/*
+ * Micrel PHY drivers
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ * (C) 2012 NetModule AG, David Andrey, added KSZ9031
+ * (C) Copyright 2017 Adaptrum, Inc.
+ * Written by Alexandru Gagniuc <alex.g@adaptrum.com> for Adaptrum, Inc.
+ */
+#include <config.h>
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <micrel.h>
+#include <phy.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * KSZ9021 - KSZ9031 common
+ */
+
+#define MII_KSZ90xx_PHY_CTL 0x1f
+#define MIIM_KSZ90xx_PHYCTL_1000 (1 << 6)
+#define MIIM_KSZ90xx_PHYCTL_100 (1 << 5)
+#define MIIM_KSZ90xx_PHYCTL_10 (1 << 4)
+#define MIIM_KSZ90xx_PHYCTL_DUPLEX (1 << 3)
+
+/* KSZ9021 PHY Registers */
+#define MII_KSZ9021_EXTENDED_CTRL 0x0b
+#define MII_KSZ9021_EXTENDED_DATAW 0x0c
+#define MII_KSZ9021_EXTENDED_DATAR 0x0d
+
+#define CTRL1000_PREFER_MASTER (1 << 10)
+#define CTRL1000_CONFIG_MASTER (1 << 11)
+#define CTRL1000_MANUAL_CONFIG (1 << 12)
+
+/* KSZ9031 PHY Registers */
+#define MII_KSZ9031_MMD_ACCES_CTRL 0x0d
+#define MII_KSZ9031_MMD_REG_DATA 0x0e
+
+static int ksz90xx_startup(struct phy_device *phydev)
+{
+ unsigned phy_ctl;
+ int ret;
+
+ ret = genphy_update_link(phydev);
+ if (ret)
+ return ret;
+
+ phy_ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ90xx_PHY_CTL);
+
+ if (phy_ctl & MIIM_KSZ90xx_PHYCTL_DUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ if (phy_ctl & MIIM_KSZ90xx_PHYCTL_1000)
+ phydev->speed = SPEED_1000;
+ else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_100)
+ phydev->speed = SPEED_100;
+ else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_10)
+ phydev->speed = SPEED_10;
+ return 0;
+}
+
+/* Common OF config bits for KSZ9021 and KSZ9031 */
+#ifdef CONFIG_DM_ETH
+struct ksz90x1_reg_field {
+ const char *name;
+ const u8 size; /* Size of the bitfield, in bits */
+ const u8 off; /* Offset from bit 0 */
+ const u8 dflt; /* Default value */
+};
+
+struct ksz90x1_ofcfg {
+ const u16 reg;
+ const u16 devad;
+ const struct ksz90x1_reg_field *grp;
+ const u16 grpsz;
+};
+
+static const struct ksz90x1_reg_field ksz90x1_rxd_grp[] = {
+ { "rxd0-skew-ps", 4, 0, 0x7 }, { "rxd1-skew-ps", 4, 4, 0x7 },
+ { "rxd2-skew-ps", 4, 8, 0x7 }, { "rxd3-skew-ps", 4, 12, 0x7 }
+};
+
+static const struct ksz90x1_reg_field ksz90x1_txd_grp[] = {
+ { "txd0-skew-ps", 4, 0, 0x7 }, { "txd1-skew-ps", 4, 4, 0x7 },
+ { "txd2-skew-ps", 4, 8, 0x7 }, { "txd3-skew-ps", 4, 12, 0x7 },
+};
+
+static const struct ksz90x1_reg_field ksz9021_clk_grp[] = {
+ { "txen-skew-ps", 4, 0, 0x7 }, { "txc-skew-ps", 4, 4, 0x7 },
+ { "rxdv-skew-ps", 4, 8, 0x7 }, { "rxc-skew-ps", 4, 12, 0x7 },
+};
+
+static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = {
+ { "txen-skew-ps", 4, 0, 0x7 }, { "rxdv-skew-ps", 4, 4, 0x7 }
+};
+
+static const struct ksz90x1_reg_field ksz9031_clk_grp[] = {
+ { "rxc-skew-ps", 5, 0, 0xf }, { "txc-skew-ps", 5, 5, 0xf }
+};
+
+static int ksz90x1_of_config_group(struct phy_device *phydev,
+ struct ksz90x1_ofcfg *ofcfg)
+{
+ struct udevice *dev = phydev->dev;
+ struct phy_driver *drv = phydev->drv;
+ const int ps_to_regval = 60;
+ int val[4];
+ int i, changed = 0, offset, max;
+ u16 regval = 0;
+
+ if (!drv || !drv->writeext)
+ return -EOPNOTSUPP;
+
+ for (i = 0; i < ofcfg->grpsz; i++) {
+ val[i] = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
+ ofcfg->grp[i].name, -1);
+ offset = ofcfg->grp[i].off;
+ if (val[i] == -1) {
+ /* Default register value for KSZ9021 */
+ regval |= ofcfg->grp[i].dflt << offset;
+ } else {
+ changed = 1; /* Value was changed in OF */
+ /* Calculate the register value and fix corner cases */
+ if (val[i] > ps_to_regval * 0xf) {
+ max = (1 << ofcfg->grp[i].size) - 1;
+ regval |= max << offset;
+ } else {
+ regval |= (val[i] / ps_to_regval) << offset;
+ }
+ }
+ }
+
+ if (!changed)
+ return 0;
+
+ return drv->writeext(phydev, 0, ofcfg->devad, ofcfg->reg, regval);
+}
+
+static int ksz9021_of_config(struct phy_device *phydev)
+{
+ struct ksz90x1_ofcfg ofcfg[] = {
+ { MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0, ksz90x1_rxd_grp, 4 },
+ { MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0, ksz90x1_txd_grp, 4 },
+ { MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0, ksz9021_clk_grp, 4 },
+ };
+ int i, ret = 0;
+
+ for (i = 0; i < ARRAY_SIZE(ofcfg); i++) {
+ ret = ksz90x1_of_config_group(phydev, &(ofcfg[i]));
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ksz9031_of_config(struct phy_device *phydev)
+{
+ struct ksz90x1_ofcfg ofcfg[] = {
+ { MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, 2, ksz9031_ctl_grp, 2 },
+ { MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 },
+ { MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 },
+ { MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, 2, ksz9031_clk_grp, 2 },
+ };
+ int i, ret = 0;
+
+ for (i = 0; i < ARRAY_SIZE(ofcfg); i++) {
+ ret = ksz90x1_of_config_group(phydev, &(ofcfg[i]));
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ksz9031_center_flp_timing(struct phy_device *phydev)
+{
+ struct phy_driver *drv = phydev->drv;
+ int ret = 0;
+
+ if (!drv || !drv->writeext)
+ return -EOPNOTSUPP;
+
+ ret = drv->writeext(phydev, 0, 0, MII_KSZ9031_FLP_BURST_TX_LO, 0x1A80);
+ if (ret)
+ return ret;
+
+ ret = drv->writeext(phydev, 0, 0, MII_KSZ9031_FLP_BURST_TX_HI, 0x6);
+ return ret;
+}
+
+#else /* !CONFIG_DM_ETH */
+static int ksz9021_of_config(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static int ksz9031_of_config(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static int ksz9031_center_flp_timing(struct phy_device *phydev)
+{
+ return 0;
+}
+#endif
+
+/*
+ * KSZ9021
+ */
+int ksz9021_phy_extended_write(struct phy_device *phydev, int regnum, u16 val)
+{
+ /* extended registers */
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ MII_KSZ9021_EXTENDED_CTRL, regnum | 0x8000);
+ return phy_write(phydev, MDIO_DEVAD_NONE,
+ MII_KSZ9021_EXTENDED_DATAW, val);
+}
+
+int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum)
+{
+ /* extended registers */
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_CTRL, regnum);
+ return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_DATAR);
+}
+
+
+static int ksz9021_phy_extread(struct phy_device *phydev, int addr, int devaddr,
+ int regnum)
+{
+ return ksz9021_phy_extended_read(phydev, regnum);
+}
+
+static int ksz9021_phy_extwrite(struct phy_device *phydev, int addr,
+ int devaddr, int regnum, u16 val)
+{
+ return ksz9021_phy_extended_write(phydev, regnum, val);
+}
+
+static int ksz9021_config(struct phy_device *phydev)
+{
+ unsigned ctrl1000 = 0;
+ const unsigned master = CTRL1000_PREFER_MASTER |
+ CTRL1000_CONFIG_MASTER | CTRL1000_MANUAL_CONFIG;
+ unsigned features = phydev->drv->features;
+ int ret;
+
+ ret = ksz9021_of_config(phydev);
+ if (ret)
+ return ret;
+
+ if (getenv("disable_giga"))
+ features &= ~(SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full);
+ /* force master mode for 1000BaseT due to chip errata */
+ if (features & SUPPORTED_1000baseT_Half)
+ ctrl1000 |= ADVERTISE_1000HALF | master;
+ if (features & SUPPORTED_1000baseT_Full)
+ ctrl1000 |= ADVERTISE_1000FULL | master;
+ phydev->advertising = features;
+ phydev->supported = features;
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, ctrl1000);
+ genphy_config_aneg(phydev);
+ genphy_restart_aneg(phydev);
+ return 0;
+}
+
+static struct phy_driver ksz9021_driver = {
+ .name = "Micrel ksz9021",
+ .uid = 0x221610,
+ .mask = 0xfffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &ksz9021_config,
+ .startup = &ksz90xx_startup,
+ .shutdown = &genphy_shutdown,
+ .writeext = &ksz9021_phy_extwrite,
+ .readext = &ksz9021_phy_extread,
+};
+
+/*
+ * KSZ9031
+ */
+int ksz9031_phy_extended_write(struct phy_device *phydev,
+ int devaddr, int regnum, u16 mode, u16 val)
+{
+ /*select register addr for mmd*/
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ MII_KSZ9031_MMD_ACCES_CTRL, devaddr);
+ /*select register for mmd*/
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ MII_KSZ9031_MMD_REG_DATA, regnum);
+ /*setup mode*/
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ MII_KSZ9031_MMD_ACCES_CTRL, (mode | devaddr));
+ /*write the value*/
+ return phy_write(phydev, MDIO_DEVAD_NONE,
+ MII_KSZ9031_MMD_REG_DATA, val);
+}
+
+int ksz9031_phy_extended_read(struct phy_device *phydev, int devaddr,
+ int regnum, u16 mode)
+{
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ MII_KSZ9031_MMD_ACCES_CTRL, devaddr);
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ MII_KSZ9031_MMD_REG_DATA, regnum);
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ MII_KSZ9031_MMD_ACCES_CTRL, (devaddr | mode));
+ return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9031_MMD_REG_DATA);
+}
+
+static int ksz9031_phy_extread(struct phy_device *phydev, int addr, int devaddr,
+ int regnum)
+{
+ return ksz9031_phy_extended_read(phydev, devaddr, regnum,
+ MII_KSZ9031_MOD_DATA_NO_POST_INC);
+}
+
+static int ksz9031_phy_extwrite(struct phy_device *phydev, int addr,
+ int devaddr, int regnum, u16 val)
+{
+ return ksz9031_phy_extended_write(phydev, devaddr, regnum,
+ MII_KSZ9031_MOD_DATA_POST_INC_RW, val);
+}
+
+static int ksz9031_config(struct phy_device *phydev)
+{
+ int ret;
+ ret = ksz9031_of_config(phydev);
+ if (ret)
+ return ret;
+ ret = ksz9031_center_flp_timing(phydev);
+ if (ret)
+ return ret;
+ return genphy_config(phydev);
+}
+
+static struct phy_driver ksz9031_driver = {
+ .name = "Micrel ksz9031",
+ .uid = 0x221620,
+ .mask = 0xfffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &ksz9031_config,
+ .startup = &ksz90xx_startup,
+ .shutdown = &genphy_shutdown,
+ .writeext = &ksz9031_phy_extwrite,
+ .readext = &ksz9031_phy_extread,
+};
+
+int phy_micrel_ksz90x1_init(void)
+{
+ phy_register(&ksz9021_driver);
+ phy_register(&ksz9031_driver);
+ return 0;
+}