ti: common: dra7: Add standard access for board description EEPROM
DRA7 EVM revH and later EVMs have EEPROM populated that can contain board
description information such as name, revision, DDR definition, etc. Adding
support for this EEPROM format.
Acked-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
diff --git a/board/ti/common/board_detect.h b/board/ti/common/board_detect.h
index c17ab34..eb17f6f 100644
--- a/board/ti/common/board_detect.h
+++ b/board/ti/common/board_detect.h
@@ -44,6 +44,37 @@
char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN];
} __attribute__ ((__packed__));
+/* DRA7 EEPROM MAGIC Header identifier */
+#define DRA7_EEPROM_HEADER_MAGIC 0xAA5533EE
+#define DRA7_EEPROM_HDR_NAME_LEN 16
+#define DRA7_EEPROM_HDR_CONFIG_LEN 4
+
+/**
+ * struct dra7_eeprom - This structure holds data read in from the DRA7 EVM
+ * EEPROMs.
+ * @header: This holds the magic number
+ * @name: The name of the board
+ * @version_major: Board major version
+ * @version_minor: Board minor version
+ * @config: Board specific config options
+ * @emif1_size: Size of DDR attached to EMIF1
+ * @emif2_size: Size of DDR attached to EMIF2
+ *
+ * The data is this structure is read from the EEPROM on the board.
+ * It is used for board detection which is based on name. It is used
+ * to configure specific DRA7 boards. This allows booting of multiple
+ * DRA7 boards with a single MLO and u-boot.
+ */
+struct dra7_eeprom {
+ u32 header;
+ char name[DRA7_EEPROM_HDR_NAME_LEN];
+ u16 version_major;
+ u16 version_minor;
+ char config[DRA7_EEPROM_HDR_CONFIG_LEN];
+ u32 emif1_size;
+ u32 emif2_size;
+} __attribute__ ((__packed__));
+
/**
* struct ti_common_eeprom - Null terminated, usable EEPROM contents.
* header: Magic number
@@ -52,6 +83,8 @@
* @serial: NULL terminated serial number
* @config: NULL terminated Board specific config options
* @mac_addr: MAC addresses
+ * @emif1_size: Size of the ddr available on emif1
+ * @emif2_size: Size of the ddr available on emif2
*/
struct ti_common_eeprom {
u32 header;
@@ -60,6 +93,8 @@
char serial[TI_EEPROM_HDR_SERIAL_LEN + 1];
char config[TI_EEPROM_HDR_CONFIG_LEN + 1];
char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN];
+ u64 emif1_size;
+ u64 emif2_size;
};
#define TI_EEPROM_DATA ((struct ti_common_eeprom *)\
@@ -76,6 +111,13 @@
int ti_i2c_eeprom_am_get(int bus_addr, int dev_addr);
/**
+ * ti_i2c_eeprom_dra7_get() - Consolidated eeprom data for DRA7 TI EVMs
+ * @bus_addr: I2C bus address
+ * @dev_addr: I2C slave address
+ */
+int ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr);
+
+/**
* board_ti_is() - Board detection logic for TI EVMs
* @name_tag: Tag used in eeprom for the board
*
@@ -130,6 +172,20 @@
void board_ti_get_eth_mac_addr(int index, u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN]);
/**
+ * board_ti_get_emif1_size() - Get size of the DDR on emif1 for TI EVMs
+ *
+ * Return: NULL if eeprom was'nt read or emif1_size is not available.
+ */
+u64 board_ti_get_emif1_size(void);
+
+/**
+ * board_ti_get_emif2_size() - Get size of the DDR on emif2 for TI EVMs
+ *
+ * Return: NULL if eeprom was'nt read or emif2_size is not available.
+ */
+u64 board_ti_get_emif2_size(void);
+
+/**
* set_board_info_env() - Setup commonly used board information environment vars
* @name: Name of the board
*