| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2016 Rockchip Electronics Co., Ltd |
| * (C) Copyright 2022 Peter Robinson <pbrobinson at gmail.com> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <init.h> |
| #include <syscon.h> |
| #include <asm/io.h> |
| #include <asm/arch-rockchip/clock.h> |
| #include <asm/arch-rockchip/grf_rk3399.h> |
| #include <asm/arch-rockchip/hardware.h> |
| #include <asm/arch-rockchip/misc.h> |
| #include <power/regulator.h> |
| |
| #define GRF_IO_VSEL_BT565_SHIFT 0 |
| #define PMUGRF_CON0_VSEL_SHIFT 8 |
| |
| #ifndef CONFIG_SPL_BUILD |
| int board_early_init_f(void) |
| { |
| struct udevice *regulator; |
| int ret; |
| |
| ret = regulator_get_by_platname("vcc5v0_usb", ®ulator); |
| if (ret) { |
| pr_debug("%s vcc5v0_usb init fail! ret %d\n", __func__, ret); |
| goto out; |
| } |
| |
| ret = regulator_set_enable(regulator, true); |
| if (ret) |
| pr_debug("%s vcc5v0-host-en-gpio set fail! ret %d\n", __func__, ret); |
| |
| out: |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_MISC_INIT_R |
| static void setup_iodomain(void) |
| { |
| struct rk3399_grf_regs *grf = |
| syscon_get_first_range(ROCKCHIP_SYSCON_GRF); |
| struct rk3399_pmugrf_regs *pmugrf = |
| syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); |
| |
| /* BT565 is in 1.8v domain */ |
| rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT); |
| |
| /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */ |
| rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT); |
| } |
| |
| int misc_init_r(void) |
| { |
| const u32 cpuid_offset = 0x7; |
| const u32 cpuid_length = 0x10; |
| u8 cpuid[cpuid_length]; |
| int ret; |
| |
| setup_iodomain(); |
| |
| ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid); |
| if (ret) |
| return ret; |
| |
| ret = rockchip_cpuid_set(cpuid, cpuid_length); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| #endif |