microblaze: Add support for run time relocation
Microblaze is using NEEDS_MANUAL_RELOC from the beginnging. This is causing
issues with function pointer arrays which need to be updated manually after
relocation. Building code with -fPIC and linking with -pic will remove this
limitation and there is no longer need to run manual update.
By default still old option is enabled but by disabling NEEDS_MANUAL_RELOC
code will be compiled for full relocation.
The patch does couple of things which are connected to each other.
- Define STATIC_RELA dependency to call relocate-rela to fill sections.
- REMAKE_ELF was already enabled but u-boot file can't be used because
sections are empty. relocate-rela will fill them and output file is
u-boot.elf which should be used.
- Add support for full relocation (u-boot.elf)
- Add support for early relocation when u-boot.bin is loaded to different
address then CONFIG_SYS_TEXT_BASE
- Add rela.dyn and dynsym sections
Disabling NEEDS_MANUAL_RELOC U-Boot size increased by 10% of it's original
size (550kB to 608kB).
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/a845670b34925859b2e321875f7588a29f6655f9.1655299267.git.michal.simek@amd.com
diff --git a/arch/microblaze/cpu/Makefile b/arch/microblaze/cpu/Makefile
index f7a83d0..1feffc6 100644
--- a/arch/microblaze/cpu/Makefile
+++ b/arch/microblaze/cpu/Makefile
@@ -6,4 +6,5 @@
extra-y = start.o
obj-y = irq.o
obj-y += interrupts.o cache.o exception.o timer.o
+obj-$(CONFIG_STATIC_RELA) += relocate.o
obj-$(CONFIG_SPL_BUILD) += spl.o