i2c: designware_i2c: remove apparently redundant read of 'i2c, speeds' DT property
This code first figures out if there is an i2c,speeds property, if so
its size in u32s, and then reads the value into the local speeds[]
array. Both 'size' and 'speeds' are completely unused thereafter.
It's not at all clear what this is supposed to do. Of course, it could
be seen as a sanity check that the DT node does have an i2c,speeds
property with an appropriate number of elements, but for that one
wouldn't actually need to read it into speeds[]. Also, I can't find
anywhere else in the U-Boot code which makes use of values from that
property (this is is the only C code referencing "i2c,speeds"), so it
seems pointless to insist that it's there.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
diff --git a/drivers/i2c/designware_i2c_pci.c b/drivers/i2c/designware_i2c_pci.c
index 46c2545..28495a3 100644
--- a/drivers/i2c/designware_i2c_pci.c
+++ b/drivers/i2c/designware_i2c_pci.c
@@ -147,9 +147,7 @@
{
struct dw_i2c_speed_config config;
char path[ACPI_PATH_MAX];
- u32 speeds[4];
uint speed;
- int size;
int ret;
/* If no device-tree node, ignore this since we assume it isn't used */
@@ -160,18 +158,6 @@
if (ret)
return log_msg_ret("path", ret);
- size = dev_read_size(dev, "i2c,speeds");
- if (size < 0)
- return log_msg_ret("i2c,speeds", -EINVAL);
-
- size /= sizeof(u32);
- if (size > ARRAY_SIZE(speeds))
- return log_msg_ret("array", -E2BIG);
-
- ret = dev_read_u32_array(dev, "i2c,speeds", speeds, size);
- if (ret)
- return log_msg_ret("read", -E2BIG);
-
speed = dev_read_u32_default(dev, "clock-frequency", 100000);
acpigen_write_scope(ctx, path);
ret = dw_i2c_gen_speed_config(dev, speed, &config);