dwc3: move phy operation to core.c
Those operations can be used for peripheral operation as well as host
operation.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
# Conflicts:
# drivers/usb/dwc3/core.c
# drivers/usb/host/xhci-dwc3.c
diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
index dd0d156..83b9f11 100644
--- a/drivers/usb/host/xhci-dwc3.c
+++ b/drivers/usb/host/xhci-dwc3.c
@@ -12,6 +12,7 @@
#include <fdtdec.h>
#include <generic-phy.h>
#include <usb.h>
+#include <dwc3-uboot.h>
#include "xhci.h"
#include <asm/io.h>
@@ -110,105 +111,21 @@
}
#if CONFIG_IS_ENABLED(DM_USB)
-static int xhci_dwc3_setup_phy(struct udevice *dev)
-{
- struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
- int i, ret, count;
-
- /* Return if no phy declared */
- if (!dev_read_prop(dev, "phys", NULL))
- return 0;
-
- count = dev_count_phandle_with_args(dev, "phys", "#phy-cells");
- if (count <= 0)
- return count;
-
- plat->usb_phys = devm_kcalloc(dev, count, sizeof(struct phy),
- GFP_KERNEL);
- if (!plat->usb_phys)
- return -ENOMEM;
-
- for (i = 0; i < count; i++) {
- ret = generic_phy_get_by_index(dev, i, &plat->usb_phys[i]);
- if (ret && ret != -ENOENT) {
- pr_err("Failed to get USB PHY%d for %s\n",
- i, dev->name);
- return ret;
- }
-
- ++plat->num_phys;
- }
-
- for (i = 0; i < plat->num_phys; i++) {
- ret = generic_phy_init(&plat->usb_phys[i]);
- if (ret) {
- pr_err("Can't init USB PHY%d for %s\n",
- i, dev->name);
- goto phys_init_err;
- }
- }
-
- for (i = 0; i < plat->num_phys; i++) {
- ret = generic_phy_power_on(&plat->usb_phys[i]);
- if (ret) {
- pr_err("Can't power USB PHY%d for %s\n",
- i, dev->name);
- goto phys_poweron_err;
- }
- }
-
- return 0;
-
-phys_poweron_err:
- for (; i >= 0; i--)
- generic_phy_power_off(&plat->usb_phys[i]);
-
- for (i = 0; i < plat->num_phys; i++)
- generic_phy_exit(&plat->usb_phys[i]);
-
- return ret;
-
-phys_init_err:
- for (; i >= 0; i--)
- generic_phy_exit(&plat->usb_phys[i]);
-
- return ret;
-}
-
-static int xhci_dwc3_shutdown_phy(struct udevice *dev)
-{
- struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
- int i, ret;
-
- for (i = 0; i < plat->num_phys; i++) {
- if (!generic_phy_valid(&plat->usb_phys[i]))
- continue;
-
- ret = generic_phy_power_off(&plat->usb_phys[i]);
- ret |= generic_phy_exit(&plat->usb_phys[i]);
- if (ret) {
- pr_err("Can't shutdown USB PHY%d for %s\n",
- i, dev->name);
- }
- }
-
- return 0;
-}
-
static int xhci_dwc3_probe(struct udevice *dev)
{
struct xhci_hcor *hcor;
struct xhci_hccr *hccr;
struct dwc3 *dwc3_reg;
enum usb_dr_mode dr_mode;
+ struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
int ret;
hccr = (struct xhci_hccr *)((uintptr_t)dev_read_addr(dev));
hcor = (struct xhci_hcor *)((uintptr_t)hccr +
HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
- ret = xhci_dwc3_setup_phy(dev);
- if (ret)
+ ret = dwc3_setup_phy(dev, &plat->usb_phys, &plat->num_phys);
+ if (ret && (ret != -ENOTSUPP))
return ret;
dwc3_reg = (struct dwc3 *)((char *)(hccr) + DWC3_REG_OFFSET);
@@ -227,7 +144,9 @@
static int xhci_dwc3_remove(struct udevice *dev)
{
- xhci_dwc3_shutdown_phy(dev);
+ struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
+
+ dwc3_shutdown_phy(dev, plat->usb_phys, plat->num_phys);
return xhci_deregister(dev);
}