fdt: translate address if #size-cells = <0>
The __of_translate_address routine translates an address from the
device tree into a CPU physical address. A note in the description of
the routine explains that the crossing of any level with
since inherited from IBM. This does not happen for Texas Instruments, or
at least for the beaglebone device tree. Without this patch, in fact,
the translation into physical addresses of the registers contained in the
am33xx-clocks.dtsi nodes would not be possible. They all have a parent
with #size-cells = <0>.
The CONFIG_OF_TRANSLATE_ZERO_SIZE_CELLS symbol makes translation
possible even in the case of crossing levels with #size-cells = <0>.
The patch acts conservatively on address translation, except for
removing a check within the of_translate_one function in the
drivers/core/of_addr.c file:
+
ranges = of_get_property(parent, rprop, &rlen);
- if (ranges == NULL && !of_empty_ranges_quirk(parent)) {
- debug("no ranges; cannot translate\n");
- return 1;
- }
if (ranges == NULL || rlen == 0) {
offset = of_read_number(addr, na);
memset(addr, 0, pna * 4);
debug("empty ranges; 1:1 translation\n");
There are two reasons:
1 The function of_empty_ranges_quirk always returns false, invalidating
the following if statement in case of null ranges. Therefore one of
the two checks is useless.
2 The implementation of the of_translate_one function found in the
common/fdt_support.c file has removed this check while keeping the one
about the 1:1 translation.
The patch adds a test and modifies a check for the correctness of an
address in the case of enabling translation also for zero size cells.
The added test checks translations of addresses generated by nodes of
a device tree similar to those you can find in the files am33xx.dtsi
and am33xx-clocks.dtsi for which the patch was created.
The patch was also tested on a beaglebone black board. The addresses
generated for the registers of the loaded drivers are those specified
by the AM335x reference manual.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Tested-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index c9b9b7b..efc440a 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -42,6 +42,7 @@
fdt-dummy1 = "/translation-test@8000/dev@1,100";
fdt-dummy2 = "/translation-test@8000/dev@2,200";
fdt-dummy3 = "/translation-test@8000/noxlatebus@3,300/dev@42";
+ fdt-dummy4 = "/translation-test@8000/xlatebus@4,400/devs/dev@19";
usb0 = &usb_0;
usb1 = &usb_1;
usb2 = &usb_2;
@@ -1082,6 +1083,7 @@
1 0x100 0x9000 0x1000
2 0x200 0xA000 0x1000
3 0x300 0xB000 0x1000
+ 4 0x400 0xC000 0x1000
>;
dma-ranges = <0 0x000 0x10000000 0x1000
@@ -1118,6 +1120,25 @@
reg = <0x42>;
};
};
+
+ xlatebus@4,400 {
+ compatible = "sandbox,zero-size-cells-bus";
+ reg = <4 0x400 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 4 0x400 0x1000>;
+
+ devs {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dev@19 {
+ compatible = "denx,u-boot-fdt-dummy";
+ reg = <0x19>;
+ };
+ };
+ };
+
};
osd {
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 5ae75df..638eca9 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -20,6 +20,8 @@
#include <exports.h>
#include <fdtdec.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/**
* fdt_getprop_u32_default_node - Return a node's property or a default
*
@@ -996,8 +998,8 @@
/* Max address size we deal with */
#define OF_MAX_ADDR_CELLS 4
#define OF_BAD_ADDR FDT_ADDR_T_NONE
-#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
- (ns) > 0)
+#define OF_CHECK_COUNTS(na, ns) (((na) > 0 && (na) <= OF_MAX_ADDR_CELLS) && \
+ ((ns) > 0 || gd_size_cells_0()))
/* Debug utility */
#ifdef DEBUG
diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
index 65a503e..dbfe51c 100644
--- a/drivers/core/Kconfig
+++ b/drivers/core/Kconfig
@@ -247,6 +247,18 @@
used for the address translation. This function is faster and
smaller in size than fdt_translate_address().
+config OF_TRANSLATE_ZERO_SIZE_CELLS
+ bool "Enable translation for zero size cells"
+ depends on OF_TRANSLATE
+ default n
+ help
+ The routine used to translate an FDT address into a physical CPU
+ address was developed by IBM. It considers that crossing any level
+ with #size-cells = <0> makes translation impossible, even if it is
+ not the way it was specified.
+ Enabling this option makes translation possible even in the case
+ of crossing levels with #size-cells = <0>.
+
config SPL_OF_TRANSLATE
bool "Translate addresses using fdt_translate_address in SPL"
depends on SPL_DM && SPL_OF_CONTROL
diff --git a/drivers/core/fdtaddr.c b/drivers/core/fdtaddr.c
index 8b48aa5..ed55f69 100644
--- a/drivers/core/fdtaddr.c
+++ b/drivers/core/fdtaddr.c
@@ -49,7 +49,7 @@
reg += index * (na + ns);
- if (ns) {
+ if (ns || gd_size_cells_0()) {
/*
* Use the full-fledged translate function for complex
* bus setups.
diff --git a/drivers/core/of_addr.c b/drivers/core/of_addr.c
index ca34d84..bbe8013 100644
--- a/drivers/core/of_addr.c
+++ b/drivers/core/of_addr.c
@@ -18,7 +18,8 @@
/* Max address size we deal with */
#define OF_MAX_ADDR_CELLS 4
#define OF_CHECK_ADDR_COUNT(na) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS)
-#define OF_CHECK_COUNTS(na, ns) (OF_CHECK_ADDR_COUNT(na) && (ns) > 0)
+#define OF_CHECK_COUNTS(na, ns) (OF_CHECK_ADDR_COUNT(na) && \
+ ((ns) > 0 || gd_size_cells_0()))
static struct of_bus *of_match_bus(struct device_node *np);
@@ -162,11 +163,6 @@
}
EXPORT_SYMBOL(of_get_address);
-static int of_empty_ranges_quirk(const struct device_node *np)
-{
- return false;
-}
-
static int of_translate_one(const struct device_node *parent,
struct of_bus *bus, struct of_bus *pbus,
__be32 *addr, int na, int ns, int pna,
@@ -193,11 +189,8 @@
* As far as we know, this damage only exists on Apple machines, so
* This code is only enabled on powerpc. --gcl
*/
+
ranges = of_get_property(parent, rprop, &rlen);
- if (ranges == NULL && !of_empty_ranges_quirk(parent)) {
- debug("no ranges; cannot translate\n");
- return 1;
- }
if (ranges == NULL || rlen == 0) {
offset = of_read_number(addr, na);
memset(addr, 0, pna * 4);
diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c
index 2a6e43d..7a5f4c0 100644
--- a/drivers/core/ofnode.c
+++ b/drivers/core/ofnode.c
@@ -316,7 +316,8 @@
ns = of_n_size_cells(ofnode_to_np(node));
- if (IS_ENABLED(CONFIG_OF_TRANSLATE) && ns > 0) {
+ if (IS_ENABLED(CONFIG_OF_TRANSLATE) &&
+ (ns > 0 || gd_size_cells_0())) {
return of_translate_address(ofnode_to_np(node), prop_val);
} else {
na = of_n_addr_cells(ofnode_to_np(node));
@@ -690,8 +691,10 @@
ns = of_n_size_cells(np);
*sizep = of_read_number(prop + na, ns);
- if (CONFIG_IS_ENABLED(OF_TRANSLATE) && ns > 0)
+ if (CONFIG_IS_ENABLED(OF_TRANSLATE) &&
+ (ns > 0 || gd_size_cells_0())) {
return of_translate_address(np, prop);
+ }
else
return of_read_number(prop, na);
} else {
diff --git a/drivers/core/root.c b/drivers/core/root.c
index 78de7cd..2bfa75b 100644
--- a/drivers/core/root.c
+++ b/drivers/core/root.c
@@ -132,6 +132,9 @@
{
int ret;
+ if (IS_ENABLED(CONFIG_OF_TRANSLATE_ZERO_SIZE_CELLS))
+ gd->dm_flags |= GD_DM_FLG_SIZE_CELLS_0;
+
if (gd->dm_root) {
dm_warn("Virtual root driver already exists!\n");
return -EINVAL;
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 31e2491..efa09a1 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -184,6 +184,12 @@
#ifdef CONFIG_DM
/**
+ * @dm_flags: additional flags for Driver Model
+ *
+ * See &enum gd_dm_flags
+ */
+ unsigned long dm_flags;
+ /**
* @dm_root: root instance for Driver Model
*/
struct udevice *dm_root;
@@ -471,6 +477,12 @@
#define gd_acpi_ctx() NULL
#endif
+#if CONFIG_IS_ENABLED(DM)
+#define gd_size_cells_0() (gd->dm_flags & GD_DM_FLG_SIZE_CELLS_0)
+#else
+#define gd_size_cells_0() (0)
+#endif
+
/**
* enum gd_flags - global data flags
*
@@ -555,6 +567,18 @@
GD_FLG_SMP_READY = 0x40000,
};
+/**
+ * enum gd_dm_flags - global data flags for Driver Model
+ *
+ * See field dm_flags of &struct global_data.
+ */
+enum gd_dm_flags {
+ /**
+ * @GD_DM_FLG_SIZE_CELLS_0: Enable #size-cells=<0> translation
+ */
+ GD_DM_FLG_SIZE_CELLS_0 = 0x00001,
+};
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_GENERIC_GBL_DATA_H */
diff --git a/test/dm/test-fdt.c b/test/dm/test-fdt.c
index b535390..31fb666 100644
--- a/test/dm/test-fdt.c
+++ b/test/dm/test-fdt.c
@@ -5,6 +5,7 @@
#include <common.h>
#include <dm.h>
+#include <dm/device_compat.h>
#include <errno.h>
#include <fdtdec.h>
#include <log.h>
@@ -549,6 +550,64 @@
.id = UCLASS_TEST_DUMMY,
};
+static int zero_size_cells_bus_bind(struct udevice *dev)
+{
+ ofnode child;
+ int err;
+
+ ofnode_for_each_subnode(child, dev_ofnode(dev)) {
+ if (ofnode_get_property(child, "compatible", NULL))
+ continue;
+
+ err = device_bind_driver_to_node(dev,
+ "zero_size_cells_bus_child_drv",
+ "zero_size_cells_bus_child",
+ child, NULL);
+ if (err) {
+ dev_err(dev, "%s: failed to bind %s\n", __func__,
+ ofnode_get_name(child));
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static const struct udevice_id zero_size_cells_bus_ids[] = {
+ { .compatible = "sandbox,zero-size-cells-bus" },
+ { }
+};
+
+U_BOOT_DRIVER(zero_size_cells_bus) = {
+ .name = "zero_size_cells_bus_drv",
+ .id = UCLASS_TEST_DUMMY,
+ .of_match = zero_size_cells_bus_ids,
+ .bind = zero_size_cells_bus_bind,
+};
+
+static int zero_size_cells_bus_child_bind(struct udevice *dev)
+{
+ ofnode child;
+ int err;
+
+ ofnode_for_each_subnode(child, dev_ofnode(dev)) {
+ err = lists_bind_fdt(dev, child, NULL, false);
+ if (err) {
+ dev_err(dev, "%s: lists_bind_fdt, err=%d\n",
+ __func__, err);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+U_BOOT_DRIVER(zero_size_cells_bus_child_drv) = {
+ .name = "zero_size_cells_bus_child_drv",
+ .id = UCLASS_TEST_DUMMY,
+ .bind = zero_size_cells_bus_child_bind,
+};
+
static int dm_test_fdt_translation(struct unit_test_state *uts)
{
struct udevice *dev;
@@ -570,8 +629,17 @@
/* No translation for busses with #size-cells == 0 */
ut_assertok(uclass_find_device_by_seq(UCLASS_TEST_DUMMY, 3, &dev));
ut_asserteq_str("dev@42", dev->name);
+ /* No translation for busses with #size-cells == 0 */
ut_asserteq(0x42, dev_read_addr(dev));
+ /* Translation for busses with #size-cells == 0 */
+ gd->dm_flags |= GD_DM_FLG_SIZE_CELLS_0;
+ ut_asserteq(0x8042, dev_read_addr(dev));
+ ut_assertok(uclass_find_device_by_seq(UCLASS_TEST_DUMMY, 4, &dev));
+ ut_asserteq_str("dev@19", dev->name);
+ ut_asserteq(0xc019, dev_read_addr(dev));
+ gd->dm_flags &= ~GD_DM_FLG_SIZE_CELLS_0;
+
/* dma address translation */
ut_assertok(uclass_find_device_by_seq(UCLASS_TEST_DUMMY, 0, &dev));
dma_addr[0] = cpu_to_be32(0);