powerpc/mpc85xx: Remove some dead code
U-Boot does not have system calls (the services it exposes to
standalone commands use a different mechanism), so the syscall handler
is dead code. It's also broken code, as it assumes it is located at
0xc00 -- while even before the patch to stop relocating exception
vectors to 0, U-Boot had the syscall at 0x900.
The critical and machine check return paths are never called -- the
regular exception return path is used instead, which works because
xSRR0/1 have already been saved and can be restored via the regular
SRR0/1 (we don't care too much in U-Boot about taking a critical/mcheck
inside another exception prolog/epilog).
Also remove a few other small unused functions.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 61883cb..28f04ee 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -1201,73 +1201,7 @@
/* No FPU on MPC85xx. This exception is not supposed to happen.
*/
STD_EXCEPTION(0x0800, FPUnavailable, UnknownException)
-
-/*
- * r0 - SYSCALL number
- * r3-... arguments
- */
-SystemCall:
- addis r11,r0,0 /* get functions table addr */
- ori r11,r11,0 /* Note: this code is patched in trap_init */
- addis r12,r0,0 /* get number of functions */
- ori r12,r12,0
-
- cmplw 0,r0,r12
- bge 1f
-
- rlwinm r0,r0,2,0,31 /* fn_addr = fn_tbl[r0] */
- add r11,r11,r0
- lwz r11,0(r11)
-
- li r20,0xd00-4 /* Get stack pointer */
- lwz r12,0(r20)
- subi r12,r12,12 /* Adjust stack pointer */
- li r0,0xc00+_end_back-SystemCall
- cmplw 0,r0,r12 /* Check stack overflow */
- bgt 1f
- stw r12,0(r20)
-
- mflr r0
- stw r0,0(r12)
- mfspr r0,SRR0
- stw r0,4(r12)
- mfspr r0,SRR1
- stw r0,8(r12)
-
- li r12,0xc00+_back-SystemCall
- mtlr r12
- mtspr SRR0,r11
-
-1: SYNC
- rfi
-_back:
-
- mfmsr r11 /* Disable interrupts */
- li r12,0
- ori r12,r12,MSR_EE
- andc r11,r11,r12
- SYNC /* Some chip revs need this... */
- mtmsr r11
- SYNC
-
- li r12,0xd00-4 /* restore regs */
- lwz r12,0(r12)
-
- lwz r11,0(r12)
- mtlr r11
- lwz r11,4(r12)
- mtspr SRR0,r11
- lwz r11,8(r12)
- mtspr SRR1,r11
-
- addi r12,r12,12 /* Adjust stack pointer */
- li r20,0xd00-4
- stw r12,0(r20)
-
- SYNC
- rfi
-_end_back:
-
+ STD_EXCEPTION(0x0900, SystemCall, UnknownException)
STD_EXCEPTION(0x0a00, Decrementer, timer_interrupt)
STD_EXCEPTION(0x0b00, IntervalTimer, UnknownException)
STD_EXCEPTION(0x0c00, WatchdogTimer, UnknownException)
@@ -1334,66 +1268,6 @@
SYNC
rfi
-crit_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SPRN_CSRR0,r2
- mtspr SPRN_CSRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfci
-
-mck_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SPRN_MCSRR0,r2
- mtspr SPRN_MCSRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfmci
-
/* Cache functions.
*/
.globl flush_icache
@@ -1478,11 +1352,6 @@
andi. r3,r3,L1CSR0_DCE
blr
- .globl get_pir
-get_pir:
- mfspr r3,PIR
- blr
-
.globl get_pvr
get_pvr:
mfspr r3,PVR
@@ -1493,11 +1362,6 @@
mfspr r3,SVR
blr
- .globl wr_tcr
-wr_tcr:
- mtspr TCR,r3
- blr
-
/*------------------------------------------------------------------------------- */
/* Function: in8 */
/* Description: Input 8 bits */