| if ARCH_STM32MP |
| |
| config SPL |
| select SPL_BOARD_INIT |
| select SPL_CLK |
| select SPL_DM |
| select SPL_DM_SEQ_ALIAS |
| select SPL_DRIVERS_MISC |
| select SPL_FRAMEWORK |
| select SPL_GPIO |
| select SPL_LIBCOMMON_SUPPORT |
| select SPL_LIBGENERIC_SUPPORT |
| select SPL_OF_CONTROL |
| select SPL_OF_TRANSLATE |
| select SPL_PINCTRL |
| select SPL_REGMAP |
| select SPL_DM_RESET |
| select SPL_SERIAL |
| select SPL_SYSCON |
| select SPL_WATCHDOG if WATCHDOG |
| imply BOOTSTAGE_STASH if SPL_BOOTSTAGE |
| imply SPL_BOOTSTAGE if BOOTSTAGE |
| imply SPL_DISPLAY_PRINT |
| imply SPL_LIBDISK_SUPPORT |
| imply SPL_SPI_LOAD if SPL_SPI |
| |
| config SYS_SOC |
| default "stm32mp" |
| |
| config SYS_MALLOC_LEN |
| default 0x2000000 |
| |
| config ENV_SIZE |
| default 0x2000 |
| |
| choice |
| prompt "Select STMicroelectronics STM32MPxxx Soc" |
| default STM32MP15x |
| |
| config STM32MP15x |
| bool "Support STMicroelectronics STM32MP15x Soc" |
| select ARCH_SUPPORT_PSCI |
| select BINMAN |
| select CPU_V7A |
| select CPU_V7_HAS_NONSEC |
| select CPU_V7_HAS_VIRT |
| select OF_BOARD if TFABOOT |
| select OF_BOARD_SETUP |
| select PINCTRL_STM32 |
| select STM32_RCC |
| select STM32_RESET |
| select STM32_SERIAL |
| select SUPPORT_SPL |
| select SYS_ARCH_TIMER |
| imply CMD_NVEDIT_INFO |
| help |
| support of STMicroelectronics SOC STM32MP15x family |
| STM32MP157, STM32MP153 or STM32MP151 |
| STMicroelectronics MPU with core ARMv7 |
| dual core A7 for STM32MP157/3, monocore for STM32MP151 |
| endchoice |
| |
| config NR_DRAM_BANKS |
| default 1 |
| |
| config DDR_CACHEABLE_SIZE |
| hex "Size of the DDR marked cacheable in pre-reloc stage" |
| default 0x40000000 |
| help |
| Define the size of the DDR marked as cacheable in U-Boot |
| pre-reloc stage. |
| This option can be useful to avoid speculatif access |
| to secured area of DDR used by TF-A or OP-TEE before U-Boot |
| initialization. |
| The areas marked "no-map" in device tree should be located |
| before this limit: STM32_DDR_BASE + DDR_CACHEABLE_SIZE. |
| |
| config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2 |
| hex "Partition on MMC2 to use to load U-Boot from" |
| depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION |
| default 1 |
| help |
| Partition on the second MMC to load U-Boot from when the MMC is being |
| used in raw mode |
| |
| config STM32_ETZPC |
| bool "STM32 Extended TrustZone Protection" |
| depends on STM32MP15x |
| default y |
| imply BOOTP_SERVERIP |
| help |
| Say y to enable STM32 Extended TrustZone Protection |
| |
| config STM32_ECDSA_VERIFY |
| bool "STM32 ECDSA verification via the ROM API" |
| depends on SPL_ECDSA_VERIFY |
| default y |
| help |
| Say y to enable the uclass driver for ECDSA verification using the |
| ROM API provided on STM32MP. |
| The ROM API is only available during SPL for now. |
| |
| config CMD_STM32KEY |
| bool "command stm32key to fuse public key hash" |
| help |
| fuse public key hash in corresponding fuse used to authenticate |
| binary. |
| This command is used to evaluate the secure boot on stm32mp SOC, |
| it is deactivated by default in real products. |
| |
| source "arch/arm/mach-stm32mp/Kconfig.15x" |
| |
| source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig" |
| endif |