reset: stm32: Add support of MCU HOLD BOOT
Handle the register RCC_MP_GCR without SET/CLR registers
but with a direct access to bit BOOT_MCU:
- deassert => set the bit: The MCU will not be in HOLD_BOOT
- assert => clear the bit: The MCU will be set in HOLD_BOOT
With this patch the RCC driver handles the MCU_HOLD_BOOT_R value
added in binding stm32mp1-resets.h
Cc: Fabien DESSENNE <fabien.dessenne@st.com>
Cc: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
diff --git a/drivers/reset/stm32-reset.c b/drivers/reset/stm32-reset.c
index 64a11cf..20c36a9 100644
--- a/drivers/reset/stm32-reset.c
+++ b/drivers/reset/stm32-reset.c
@@ -14,6 +14,9 @@
#include <asm/io.h>
#include <linux/bitops.h>
+/* offset of register without set/clear management */
+#define RCC_MP_GCR_OFFSET 0x10C
+
/* reset clear offset for STM32MP RCC */
#define RCC_CL 0x4
@@ -40,8 +43,11 @@
reset_ctl->id, bank, offset);
if (dev_get_driver_data(reset_ctl->dev) == STM32MP1)
- /* reset assert is done in rcc set register */
- writel(BIT(offset), priv->base + bank);
+ if (bank != RCC_MP_GCR_OFFSET)
+ /* reset assert is done in rcc set register */
+ writel(BIT(offset), priv->base + bank);
+ else
+ clrbits_le32(priv->base + bank, BIT(offset));
else
setbits_le32(priv->base + bank, BIT(offset));
@@ -57,8 +63,11 @@
reset_ctl->id, bank, offset);
if (dev_get_driver_data(reset_ctl->dev) == STM32MP1)
- /* reset deassert is done in rcc clr register */
- writel(BIT(offset), priv->base + bank + RCC_CL);
+ if (bank != RCC_MP_GCR_OFFSET)
+ /* reset deassert is done in rcc clr register */
+ writel(BIT(offset), priv->base + bank + RCC_CL);
+ else
+ setbits_le32(priv->base + bank, BIT(offset));
else
clrbits_le32(priv->base + bank, BIT(offset));
diff --git a/include/dt-bindings/reset/stm32mp1-resets.h b/include/dt-bindings/reset/stm32mp1-resets.h
index f0c3aae..702da37 100644
--- a/include/dt-bindings/reset/stm32mp1-resets.h
+++ b/include/dt-bindings/reset/stm32mp1-resets.h
@@ -7,6 +7,7 @@
#ifndef _DT_BINDINGS_STM32MP1_RESET_H_
#define _DT_BINDINGS_STM32MP1_RESET_H_
+#define MCU_HOLD_BOOT_R 2144
#define LTDC_R 3072
#define DSI_R 3076
#define DDRPERFM_R 3080