Makefile: Build final mpc85xx non-SPL image in standard file u-boot.bin
Currently Makefile produces final mpc85xx image when SPL is not used in
custom file u-boot-with-dtb.bin. It is quite confusing name as build
process produce also intermediate file standard file u-boot-dtb.bin (which
is just intermediate and not bootable). Other platforms use u-boot.bin
(UBOOT_BIN) as standard name for final bootable raw image.
So change Makefile rules and binman to produce final bootable file for
mpc85xx also into file u-boot.bin. There is just need for mpc85xx to not
define default rule for u-boot.bin then instruct binman (via DTS file) to
store final image into u-boot.bin (instead of u-boot-with-dtb.bin) and
finally rename target u-boot-with-dtb.bin to u-boot.bin.
With this change are also removed custom Makefile hacks for mpc85xx that it
produced non-standard output file. And also updated documentation.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
diff --git a/Makefile b/Makefile
index 0d3d80e..b1dc785 100644
--- a/Makefile
+++ b/Makefile
@@ -997,10 +997,6 @@
INPUTS-y += init_sp_bss_offset_check
endif
-ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
-INPUTS-y += u-boot-with-dtb.bin
-endif
-
ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy)
# Binman image dependencies
ifeq ($(CONFIG_ARM64),y)
@@ -1217,9 +1213,12 @@
u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
$(call if_changed,cat)
+ifneq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
u-boot.bin: u-boot-dtb.bin FORCE
$(call if_changed,copy)
-else
+endif
+
+else ifneq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
u-boot.bin: u-boot-nodtb.bin FORCE
$(call if_changed,copy)
endif
@@ -1432,11 +1431,7 @@
MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -A $(ARCH) -T pblimage
-ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
-UBOOT_BIN := u-boot-with-dtb.bin
-else
UBOOT_BIN := u-boot.bin
-endif
MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
@@ -1604,7 +1599,7 @@
endif
ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
-u-boot-with-dtb.bin: u-boot-nodtb.bin u-boot.dtb \
+u-boot.bin: u-boot-nodtb.bin u-boot.dtb \
$(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
$(call if_changed,binman)
@@ -1670,12 +1665,8 @@
ifeq ($(ARCH),arm)
UBOOT_BINLOAD := u-boot.img
else
-ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
-UBOOT_BINLOAD := u-boot-with-dtb.bin
-else
UBOOT_BINLOAD := u-boot.bin
endif
-endif
OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
--gap-fill=0xff
diff --git a/arch/powerpc/dts/kmcent2-u-boot.dtsi b/arch/powerpc/dts/kmcent2-u-boot.dtsi
index ab76a9f..eeaa688 100644
--- a/arch/powerpc/dts/kmcent2-u-boot.dtsi
+++ b/arch/powerpc/dts/kmcent2-u-boot.dtsi
@@ -76,7 +76,7 @@
};
binman {
- filename = "u-boot-with-dtb.bin";
+ filename = "u-boot.bin";
skip-at-start = <CONFIG_SYS_TEXT_BASE>;
sort-by-offset;
pad-byte = <0xff>;
diff --git a/arch/powerpc/dts/u-boot.dtsi b/arch/powerpc/dts/u-boot.dtsi
index 67de476..0251afd 100644
--- a/arch/powerpc/dts/u-boot.dtsi
+++ b/arch/powerpc/dts/u-boot.dtsi
@@ -7,7 +7,7 @@
/ {
binman {
- filename = "u-boot-with-dtb.bin";
+ filename = "u-boot.bin";
skip-at-start = <CONFIG_SYS_TEXT_BASE>;
sort-by-offset;
pad-byte = <0xff>;
diff --git a/board/freescale/p1_p2_rdb_pc/README b/board/freescale/p1_p2_rdb_pc/README
index 86ff04e..f542dec 100644
--- a/board/freescale/p1_p2_rdb_pc/README
+++ b/board/freescale/p1_p2_rdb_pc/README
@@ -60,5 +60,5 @@
CONFIG_RESET_VECTOR_ADDRESS - 0xffc
If device tree support is enabled in defconfig,
-1. use 'u-boot-with-dtb.bin' for NOR boot.
+1. use 'u-boot.bin' for NOR boot.
2. use 'u-boot-with-spl.bin' for other boot.
diff --git a/board/freescale/p2041rdb/README b/board/freescale/p2041rdb/README
index 79f77e4..96612da 100644
--- a/board/freescale/p2041rdb/README
+++ b/board/freescale/p2041rdb/README
@@ -100,9 +100,6 @@
3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
CONFIG_RESET_VECTOR_ADDRESS - 0xffc
-If device tree support is enabled in defconfig, use 'u-boot-with-dtb.bin'
-instead of u-boot.bin for all boot.
-
CPLD command
============
The CPLD is used to control the power sequence and some serdes lane
diff --git a/board/freescale/t102xrdb/README b/board/freescale/t102xrdb/README
index 84deb95..de170f5 100644
--- a/board/freescale/t102xrdb/README
+++ b/board/freescale/t102xrdb/README
@@ -267,7 +267,7 @@
config_reset_vector_address - 0xffc
if device tree support is enabled in defconfig,
-1. use 'u-boot-with-dtb.bin' for nor boot.
+1. use 'u-boot.bin' for nor boot.
2. use 'u-boot-with-spl-pbl.bin' for other boot.
2-stage NAND/SPI/SD boot loader
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
index 09cb98e..e90dca4 100644
--- a/board/freescale/t104xrdb/README
+++ b/board/freescale/t104xrdb/README
@@ -382,5 +382,5 @@
CONFIG_RESET_VECTOR_ADDRESS - 0xffc
If device tree support is enabled in defconfig,
-1. use 'u-boot-with-dtb.bin' for NOR boot.
+1. use 'u-boot.bin' for NOR boot.
2. use 'u-boot-with-spl-pbl.bin' for other boot.
diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README
index 75d3173..63953d6 100755
--- a/board/freescale/t208xqds/README
+++ b/board/freescale/t208xqds/README
@@ -288,5 +288,5 @@
CONFIG_RESET_VECTOR_ADDRESS - 0xffc
If device tree support is enabled in defconfig,
-1. use 'u-boot-with-dtb.bin' for NOR boot.
+1. use 'u-boot.bin' for NOR boot.
2. use 'u-boot-with-spl-pbl.bin' for other boot.
diff --git a/board/freescale/t208xrdb/README b/board/freescale/t208xrdb/README
index c4bfd3b..60551f6 100644
--- a/board/freescale/t208xrdb/README
+++ b/board/freescale/t208xrdb/README
@@ -284,5 +284,5 @@
CONFIG_RESET_VECTOR_ADDRESS - 0xffc
If device tree support is enabled in defconfig,
-1. use 'u-boot-with-dtb.bin' for NOR boot.
+1. use 'u-boot.bin' for NOR boot.
2. use 'u-boot-with-spl-pbl.bin' for other boot.