* Patch by Jon Loeliger, 2005-05-05
Implemented support for MPC8548CDS board.
Added DDR II support based on SPD values for MPC85xx boards.
This roll-up patch also includes bugfies for the previously
published patches:
DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
diff --git a/doc/README.mpc85xxcds b/doc/README.mpc85xxcds
index e0f4916..bc5db0c 100644
--- a/doc/README.mpc85xxcds
+++ b/doc/README.mpc85xxcds
@@ -135,8 +135,8 @@
SW4=10001000
-CPU Card Switches
------------------
+8555/41 CPU Card Switches
+-------------------------
Most switches on the CPU Card should not be changed. However, the
frequency can be changed by setting SW3:
@@ -160,6 +160,45 @@
SW4=11111110
+8548 CPU Card Switches
+----------------------
+And, just to be confusing, in this set of switches:
+
+ ON = 1
+ OFF = 0
+
+Default
+ SW1=11111101
+ SW2=10011111
+ SW3=11001000 (8X) (2:1)
+ SW4=11110011
+
+ SW3=X000XXXX == CORE:CCB 4:1
+ X001XXXX == CORE:CCB 9:2
+ X010XXXX == CORE:CCB 1:1
+ X011XXXX == CORE:CCB 3:2
+ X100XXXX == CORE:CCB 2:1
+ X101XXXX == CORE:CCB 5:2
+ X110XXXX == CORE:CCB 3:1
+ X111XXXX == CORE:CCB 7:2
+ XXXX0000 == CCB:SYSCLK 16:1
+ XXXX0001 == RESERVED
+ XXXX0010 == CCB:SYSCLK 2:1
+ XXXX0011 == CCB:SYSCLK 3:1
+ XXXX0100 == CCB:SYSCLK 4:1
+ XXXX0101 == CCB:SYSCLK 5:1
+ XXXX0110 == CCB:SYSCLK 6:1
+ XXXX0111 == RESERVED
+ XXXX1000 == CCB:SYSCLK 8:1
+ XXXX1001 == CCB:SYSCLK 9:1
+ XXXX1010 == CCB:SYSCLK 10:1
+ XXXX1011 == RESERVED
+ XXXX1100 == CCB:SYSCLK 12:1
+ XXXX1101 == CCB:SYSCLK 20:1
+ XXXX1110 == RESERVED
+ XXXX1111 == RESERVED
+
+
eDINK Info
----------