powerpc: P1021RDB: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1021RDB instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and macros.
Remove macro CONFIG_P1021RDB.
Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 14ef053..3477109 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -135,6 +135,11 @@
select SUPPORT_SPL
select SUPPORT_TPL
+config TARGET_P1021RDB
+ bool "Support P1021RDB"
+ select SUPPORT_SPL
+ select SUPPORT_TPL
+
config TARGET_P1_P2_RDB_PC
bool "Support p1_p2_rdb_pc"
select SUPPORT_SPL
diff --git a/board/freescale/p1_p2_rdb_pc/Kconfig b/board/freescale/p1_p2_rdb_pc/Kconfig
index 7deb2ae..8160f44 100644
--- a/board/freescale/p1_p2_rdb_pc/Kconfig
+++ b/board/freescale/p1_p2_rdb_pc/Kconfig
@@ -2,7 +2,8 @@
TARGET_P1020MBG || \
TARGET_P1020RDB_PC || \
TARGET_P1020RDB_PD || \
- TARGET_P1020UTM
+ TARGET_P1020UTM || \
+ TARGET_P1021RDB
config SYS_BOARD
default "p1_p2_rdb_pc"
diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c
index 6dc3957..59cd89a 100644
--- a/board/freescale/p1_p2_rdb_pc/ddr.c
+++ b/board/freescale/p1_p2_rdb_pc/ddr.c
@@ -15,7 +15,7 @@
#ifdef CONFIG_SYS_DDR_RAW_TIMING
#if defined(CONFIG_P1020RDB_PROTO) || \
- defined(CONFIG_P1021RDB) || \
+ defined(CONFIG_TARGET_P1021RDB) || \
defined(CONFIG_TARGET_P1020UTM)
/* Micron MT41J256M8_187E */
dimm_params_t ddr_raw_timing = {
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index 33f2c7e..44e8e02 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -39,7 +39,7 @@
#define GPIO_SLIC_PIN 30
#define GPIO_SLIC_DATA (1 << (31 - GPIO_SLIC_PIN))
-#if defined(CONFIG_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_TARGET_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
#define GPIO_DDR_RST_PORT 1
#define GPIO_DDR_RST_PIN 8
#define GPIO_DDR_RST_DATA (1 << (31 - GPIO_DDR_RST_PIN))
@@ -47,7 +47,7 @@
#define GPIO_2BIT_MASK (0x3 << (32 - (GPIO_DDR_RST_PIN + 1) * 2))
#endif
-#if defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB)
+#if defined(CONFIG_P1025RDB) || defined(CONFIG_TARGET_P1021RDB)
#define PCA_IOPORT_I2C_ADDR 0x23
#define PCA_IOPORT_OUTPUT_CMD 0x2
#define PCA_IOPORT_CFG_CMD 0x6
@@ -58,7 +58,7 @@
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* GPIO */
{1, 1, 2, 0, 0}, /* GPIO7/PB1 - LOAD_DEFAULT_N */
-#if defined(CONFIG_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_TARGET_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
{1, 8, 1, 1, 0}, /* GPIO10/PB8 - DDR_RST */
#endif
{0, 15, 1, 0, 0}, /* GPIO11/A15 - WDI */
@@ -150,7 +150,7 @@
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
par_io_t *par_io = (par_io_t *) &(gur->qe_par_io);
-#if defined(CONFIG_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_TARGET_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
/* reset DDR3 */
setbits_be32(&par_io[GPIO_DDR_RST_PORT].cpdat, GPIO_DDR_RST_DATA);
udelay(1000);
@@ -379,7 +379,7 @@
}
#if defined(CONFIG_QE) && \
- (defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB))
+ (defined(CONFIG_P1025RDB) || defined(CONFIG_TARGET_P1021RDB))
static void fdt_board_fixup_qe_pins(void *blob)
{
unsigned int oldbus;
@@ -448,7 +448,7 @@
#ifdef CONFIG_QE
do_fixup_by_compat(blob, "fsl,qe", "status", "okay",
sizeof("okay"), 0);
-#if defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB)
+#if defined(CONFIG_P1025RDB) || defined(CONFIG_TARGET_P1021RDB)
fdt_board_fixup_qe_pins(blob);
#endif
#endif
diff --git a/configs/P1021RDB-PC_36BIT_NAND_defconfig b/configs/P1021RDB-PC_36BIT_NAND_defconfig
index d06aa57..82dcec5 100644
--- a/configs/P1021RDB-PC_36BIT_NAND_defconfig
+++ b/configs/P1021RDB-PC_36BIT_NAND_defconfig
@@ -2,13 +2,13 @@
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_PHYS_64BIT=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
CONFIG_TPL=y
diff --git a/configs/P1021RDB-PC_36BIT_SDCARD_defconfig b/configs/P1021RDB-PC_36BIT_SDCARD_defconfig
index 98705dd..2ef2eda 100644
--- a/configs/P1021RDB-PC_36BIT_SDCARD_defconfig
+++ b/configs/P1021RDB-PC_36BIT_SDCARD_defconfig
@@ -6,13 +6,13 @@
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_PHYS_64BIT=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
diff --git a/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig
index bc002af..f7910b6 100644
--- a/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig
+++ b/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig
@@ -7,13 +7,13 @@
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_PHYS_64BIT=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SPIFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
diff --git a/configs/P1021RDB-PC_36BIT_defconfig b/configs/P1021RDB-PC_36BIT_defconfig
index 6c1cb28..87d45b2 100644
--- a/configs/P1021RDB-PC_36BIT_defconfig
+++ b/configs/P1021RDB-PC_36BIT_defconfig
@@ -1,12 +1,11 @@
CONFIG_PPC=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_PHYS_64BIT=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB"
CONFIG_BOOTDELAY=10
CONFIG_HUSH_PARSER=y
CONFIG_CMD_MMC=y
diff --git a/configs/P1021RDB-PC_NAND_defconfig b/configs/P1021RDB-PC_NAND_defconfig
index ebfc053..29335b1 100644
--- a/configs/P1021RDB-PC_NAND_defconfig
+++ b/configs/P1021RDB-PC_NAND_defconfig
@@ -2,12 +2,12 @@
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
CONFIG_TPL=y
diff --git a/configs/P1021RDB-PC_SDCARD_defconfig b/configs/P1021RDB-PC_SDCARD_defconfig
index c9e4ed7..bde4d3d 100644
--- a/configs/P1021RDB-PC_SDCARD_defconfig
+++ b/configs/P1021RDB-PC_SDCARD_defconfig
@@ -6,12 +6,12 @@
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
diff --git a/configs/P1021RDB-PC_SPIFLASH_defconfig b/configs/P1021RDB-PC_SPIFLASH_defconfig
index 2fd40b7..4f1db4f 100644
--- a/configs/P1021RDB-PC_SPIFLASH_defconfig
+++ b/configs/P1021RDB-PC_SPIFLASH_defconfig
@@ -7,12 +7,12 @@
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SPIFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
CONFIG_BOOTDELAY=10
CONFIG_SPL=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
diff --git a/configs/P1021RDB-PC_defconfig b/configs/P1021RDB-PC_defconfig
index b7b93e2..e26967b 100644
--- a/configs/P1021RDB-PC_defconfig
+++ b/configs/P1021RDB-PC_defconfig
@@ -1,11 +1,10 @@
CONFIG_PPC=y
CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB"
CONFIG_BOOTDELAY=10
CONFIG_HUSH_PARSER=y
CONFIG_CMD_MMC=y
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 97a0b19..f68feb3 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -83,7 +83,7 @@
"57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
#endif
-#if defined(CONFIG_P1021RDB)
+#if defined(CONFIG_TARGET_P1021RDB)
#define CONFIG_BOARDNAME "P1021RDB-PC"
#define CONFIG_NAND_FSL_ELBC
#define CONFIG_P1021
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 3b70543..3362baf 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3385,7 +3385,6 @@
CONFIG_OVERWRITE_ETHADDR_ONCE
CONFIG_P1020
CONFIG_P1021
-CONFIG_P1021RDB
CONFIG_P1024
CONFIG_P1024RDB
CONFIG_P1025