sunxi: Add Bananapi M2+ H5 board
As the H5 is pin compatible with the H3, vendors tend to upgrade their
existing H3 products with an H5 SoC swap. This is the case with the
Bananapi M2+ H5.
Add the following to support it:
- device tree file: synced from Linux v5.0-rc1,
- defconfig: copy of bananapi_m2_plus_h3_defconfig with only SoC
family and default device tree file name changed
- MAINTAINERS entry
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
diff --git a/arch/arm/dts/sun50i-h5-bananapi-m2-plus.dts b/arch/arm/dts/sun50i-h5-bananapi-m2-plus.dts
new file mode 100644
index 0000000..3503767
--- /dev/null
+++ b/arch/arm/dts/sun50i-h5-bananapi-m2-plus.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <sunxi-bananapi-m2-plus.dtsi>
+
+/ {
+ model = "Banana Pi BPI-M2-Plus H5";
+ compatible = "sinovoip,bpi-m2-plus", "allwinner,sun50i-h5";
+};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index c6c6aee..8e2f90f 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -137,11 +137,12 @@
S: Maintained
F: configs/bananapi_m2_berry_defconfig
-BANANAPI M2 PLUS H3 BOARD
+BANANAPI M2 PLUS BOARDS
M: Icenowy Zheng <icenowy@aosc.io>
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/bananapi_m2_plus_h3_defconfig
+F: configs/bananapi_m2_plus_h5_defconfig
BANANAPI M2 ULTRA BOARD
M: Chen-Yu Tsai <wens@csie.org>
diff --git a/configs/bananapi_m2_plus_h5_defconfig b/configs/bananapi_m2_plus_h5_defconfig
new file mode 100644
index 0000000..e7c10db
--- /dev/null
+++ b/configs/bananapi_m2_plus_h5_defconfig
@@ -0,0 +1,20 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I_H5=y
+CONFIG_DRAM_CLK=672
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+CONFIG_MACPWR="PD6"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-bananapi-m2-plus"
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y