Merge branch 'master' of git://git.denx.de/u-boot-coldfire
diff --git a/MAINTAINERS b/MAINTAINERS
index 1b2da94..2daee7d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -104,8 +104,6 @@
ARIA MPC5121e
- AMX860 MPC860
- ETX094 MPC850
FPS850L MPC850
FPS860L MPC860
ICU862 MPC862
@@ -116,7 +114,6 @@
IVMS8 MPC860
IVMS8_128 MPC860
IVMS8_256 MPC860
- LANTEC MPC850
LWMON MPC823
R360MPI MPC823
RRvision MPC823
@@ -128,7 +125,6 @@
TQM855L MPC855
TQM860L MPC860
TQM860L_FEC MPC860
- c2mon MPC855
hermes MPC860
lwmon MPC823
@@ -227,7 +223,6 @@
PN62 MPC8240
IPHASE4539 MPC8260
- SCM MPC8260
Anatolij Gustschin <agust@denx.de>
@@ -543,7 +538,6 @@
FADS850SAR MPC8xx
FADS860T MPC8xx
GENIETV MPC8xx
- IAD210 MPC8xx
MBX MPC8xx
MBX860T MPC8xx
NX823 MPC8xx
diff --git a/README b/README
index 69da2b8..4f16240 100644
--- a/README
+++ b/README
@@ -2182,8 +2182,8 @@
following board configurations are known to be
"pRAM-clean":
- ETX094, IVMS8, IVML24, SPD8xx, TQM8xxL,
- HERMES, IP860, RPXlite, LWMON, LANTEC,
+ IVMS8, IVML24, SPD8xx, TQM8xxL,
+ HERMES, IP860, RPXlite, LWMON,
FLAGADM, TQM8260
- Error Recovery:
diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c
index b348a98..d7c9090 100644
--- a/arch/powerpc/cpu/mpc8xx/fec.c
+++ b/arch/powerpc/cpu/mpc8xx/fec.c
@@ -460,7 +460,7 @@
#endif /* !CONFIG_RMII */
-#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
+#elif !defined(CONFIG_ICU862)
/*
* Configure all of port D for MII.
*/
diff --git a/arch/powerpc/cpu/mpc8xx/scc.c b/arch/powerpc/cpu/mpc8xx/scc.c
index 2c93e24..2ef77b4 100644
--- a/arch/powerpc/cpu/mpc8xx/scc.c
+++ b/arch/powerpc/cpu/mpc8xx/scc.c
@@ -473,20 +473,6 @@
*((uint *) BCSR1) &= ~BCSR1_ETHEN;
#endif /* MPC860ADS */
-#if defined(CONFIG_AMX860)
- /*
- * Port B is used to control the PHY,MC68160.
- */
- immr->im_cpm.cp_pbdir |=
- (PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
-
- immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
- immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
-
- immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
- immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
-#endif /* AMX860 */
-
#ifdef CONFIG_RPXCLASSIC
*((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
*((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
@@ -542,7 +528,7 @@
*/
#if defined (CONFIG_FADS)
udelay (10000); /* wait 10 ms */
-#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
+#elif defined(CONFIG_RPXCLASSIC)
udelay (100000); /* wait 100 ms */
#endif
diff --git a/board/c2mon/Makefile b/board/c2mon/Makefile
deleted file mode 100644
index b49f26d..0000000
--- a/board/c2mon/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS = $(BOARD).o flash.o pcmcia.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/c2mon/c2mon.c b/board/c2mon/c2mon.c
deleted file mode 100644
index 348dfa0..0000000
--- a/board/c2mon/c2mon.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-const uint sdram_table[] =
-{
- /*
- * Single Read. (Offset 0 in UPMA RAM)
- */
- 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
- 0x1FF77C47, /* last */
- /*
- * SDRAM Initialization (offset 5 in UPMA RAM)
- *
- * This is no UPM entry point. The following definition uses
- * the remaining space to establish an initialization
- * sequence, which is executed by a RUN command.
- *
- */
- 0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */
- /*
- * Burst Read. (Offset 8 in UPMA RAM)
- */
- 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
- 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Single Write. (Offset 18 in UPMA RAM)
- */
- 0x1F07FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Burst Write. (Offset 20 in UPMA RAM)
- */
- 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
- 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Refresh (Offset 30 in UPMA RAM)
- */
- 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
- 0xFFFFFC84, 0xFFFFFC07, /* last */
- _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Exception. (Offset 3c in UPMA RAM)
- */
- 0x7FFFFC07, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
- char buf[64];
- int i;
- int l = getenv_f("serial#", buf, sizeof(buf));
-
- puts ("Board: TTTech C2MON ");
-
- for (i = 0; i < l; ++i) {
- if (buf[i] == ' ')
- break;
- putc (buf[i]);
- }
-
- putc ('\n');
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long reg;
- long int size8, size9;
- long int size = 0;
-
- upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table) / sizeof(uint));
-
- /*
- * Preliminary prescaler for refresh (depends on number of
- * banks): This value is selected for four cycles every 62.4 us
- * with two SDRAM banks or four cycles every 31.2 us with one
- * bank. It will be adjusted after memory sizing.
- */
- memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
-
- memctl->memc_mar = 0x00000088;
-
- /*
- * Map controller bank 2 the SDRAM bank 2 at physical address 0.
- */
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
-
- udelay (200);
-
- /* perform SDRAM initializsation sequence */
-
- memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */
- udelay (1);
- memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */
- udelay (1);
-
- memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
-
- udelay (1000);
-
- /*
- * Check Bank 0 Memory Size
- *
- * try 8 column mode
- */
- size8 = dram_size (CONFIG_SYS_MAMR_8COL,
- SDRAM_BASE2_PRELIM,
- SDRAM_MAX_SIZE);
-
- udelay (1000);
-
- /*
- * try 9 column mode
- */
- size9 = dram_size (CONFIG_SYS_MAMR_9COL,
- SDRAM_BASE2_PRELIM,
- SDRAM_MAX_SIZE);
-
- if (size8 < size9) { /* leave configuration at 9 columns */
- size = size9;
-/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
- } else { /* back to 8 columns */
- size = size8;
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
- udelay (500);
-/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
- }
-
- udelay (1000);
-
- /*
- * Adjust refresh rate depending on SDRAM type
- * For types > 128 MBit leave it at the current (fast) rate
- */
- if (size < 0x02000000) {
- /* reduce to 15.6 us (62.4 us / quad) */
- memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
- udelay (1000);
- }
-
- /*
- * Final mapping
- */
- memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
- /*
- * No bank 1
- *
- * invalidate bank
- */
- memctl->memc_br3 = 0;
-
- /* adjust refresh rate depending on SDRAM type, one bank */
- reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
- memctl->memc_mptpr = reg;
-
- udelay (10000);
-
- return (size);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
- long int maxsize)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- memctl->memc_mamr = mamr_value;
-
- return (get_ram_size(base, maxsize));
-}
diff --git a/board/c2mon/flash.c b/board/c2mon/flash.c
deleted file mode 100644
index d33cb6c..0000000
--- a/board/c2mon/flash.c
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#ifndef CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#endif
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size_b0, size_b1;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
- if (size_b1 > size_b0) {
- printf ("## ERROR: "
- "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
- size_b1, size_b1<<20,
- size_b0, size_b0<<20
- );
- flash_info[0].flash_id = FLASH_UNKNOWN;
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[0].sector_count = -1;
- flash_info[1].sector_count = -1;
- flash_info[0].size = 0;
- flash_info[1].size = 0;
- return (0);
- }
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
- /* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
- &flash_info[0]);
-#endif
-
- if (size_b1) {
- memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
- memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
- BR_MS_GPCM | BR_V;
-
- /* Re-do sizing to get full correct info */
- size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
- &flash_info[1]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[1]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
- &flash_info[1]);
-#endif
- } else {
- memctl->memc_br1 = 0; /* invalidate bank */
-
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
- }
-
- flash_info[0].size = size_b0;
- flash_info[1].size = size_b1;
-
- return (size_b0 + size_b1);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- ulong value;
- ulong base = (ulong)addr;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00900090;
-
- value = addr[0];
-
- switch (value) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- value = addr[1]; /* device ID */
-
- switch (value) {
- case AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#if 0 /* enable when device IDs are available */
- case AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
- }
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr = (volatile unsigned long *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr = (volatile unsigned long *)info->start[0];
-
- *addr = 0x00F000F0; /* reset bank */
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_long*)(info->start[sect]);
- addr[0] = 0x00300030;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_long*)(info->start[l_sect]);
- while ((addr[0] & 0x00800080) != 0x00800080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
- addr[0] = 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00A000A0;
-
- *((vu_long *)dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/c2mon/pcmcia.c b/board/c2mon/pcmcia.c
deleted file mode 100644
index 2267829..0000000
--- a/board/c2mon/pcmcia.c
+++ /dev/null
@@ -1,282 +0,0 @@
-#include <common.h>
-#include <mpc8xx.h>
-#include <pcmcia.h>
-
-#undef CONFIG_PCMCIA
-
-#if defined(CONFIG_CMD_PCMCIA)
-#define CONFIG_PCMCIA
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
-#define CONFIG_PCMCIA
-#endif
-
-#ifdef CONFIG_PCMCIA
-
-#define PCMCIA_BOARD_MSG "C2MON"
-
-static void cfg_ports (void)
-{
- volatile immap_t *immap;
- volatile cpm8xx_t *cp;
- ushort sreg;
-
- immap = (immap_t *)CONFIG_SYS_IMMR;
- cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
-
- /*
- * Configure Port C for TPS2211 PC-Card Power-Interface Switch
- *
- * Switch off all voltages, assert shutdown
- */
- sreg = immap->im_ioport.iop_pcdat;
- sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1); /* VAVPP => Hi-Z */
- sreg &= ~(TPS2211_VCCD0 | TPS2211_VCCD1); /* 3V and 5V off */
- immap->im_ioport.iop_pcdat = sreg;
-
- immap->im_ioport.iop_pcpar &= ~(TPS2211_OUTPUTS);
- immap->im_ioport.iop_pcdir |= TPS2211_OUTPUTS;
-
- debug ("Set Port C: PAR: %04x DIR: %04x DAT: %04x\n",
- immap->im_ioport.iop_pcpar,
- immap->im_ioport.iop_pcdir,
- immap->im_ioport.iop_pcdat);
-
- /*
- * Configure Port B for TPS2211 PC-Card Power-Interface Switch
- *
- * Over-Current Input only
- */
- cp->cp_pbpar &= ~(TPS2211_INPUTS);
- cp->cp_pbdir &= ~(TPS2211_INPUTS);
-
- debug ("Set Port B: PAR: %08x DIR: %08x DAT: %08x\n",
- cp->cp_pbpar, cp->cp_pbdir, cp->cp_pbdat);
-}
-
-int pcmcia_hardware_enable(int slot)
-{
- volatile immap_t *immap;
- volatile cpm8xx_t *cp;
- volatile pcmconf8xx_t *pcmp;
- volatile sysconf8xx_t *sysp;
- uint reg, pipr, mask;
- ushort sreg;
- int i;
-
- debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
- udelay(10000);
-
- immap = (immap_t *)CONFIG_SYS_IMMR;
- sysp = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
- cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
-
- /* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
- cfg_ports ();
-
- /*
- * Configure SIUMCR to enable PCMCIA port B
- * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
- */
- sysp->sc_siumcr &= ~SIUMCR_DBGC11; /* set DBGC to 00 */
-
- /* clear interrupt state, and disable interrupts */
- pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
- pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
-
- /*
- * Disable interrupts, DMA, and PCMCIA buffers
- * (isolate the interface) and assert RESET signal
- */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = 0;
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- /*
- * Make sure there is a card in the slot, then configure the interface.
- */
- udelay(10000);
- debug ("[%d] %s: PIPR(%p)=0x%x\n",
- __LINE__,__FUNCTION__,
- &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
- if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
- printf (" No Card found\n");
- return (1);
- }
-
- /*
- * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
- */
- mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
- pipr = pcmp->pcmc_pipr;
- debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
- pipr,
- (reg&PCMCIA_VS1(slot))?"n":"ff",
- (reg&PCMCIA_VS2(slot))?"n":"ff");
-
- sreg = immap->im_ioport.iop_pcdat;
- if ((pipr & mask) == mask) {
- sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1 | /* VAVPP => Hi-Z */
- TPS2211_VCCD1); /* 5V on */
- sreg &= ~(TPS2211_VCCD0); /* 3V off */
- puts (" 5.0V card found: ");
- } else {
- sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1 | /* VAVPP => Hi-Z */
- TPS2211_VCCD0); /* 3V on */
- sreg &= ~(TPS2211_VCCD1); /* 5V off */
- puts (" 3.3V card found: ");
- }
-
- debug ("\nPC DAT: %04x -> 3.3V %s 5.0V %s\n",
- sreg,
- ( (sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) ? "on" : "off",
- (!(sreg & TPS2211_VCCD0) && (sreg & TPS2211_VCCD1)) ? "on" : "off"
- );
-
- immap->im_ioport.iop_pcdat = sreg;
-
- /* Wait 500 ms; use this to check for over-current */
- for (i=0; i<5000; ++i) {
- if ((cp->cp_pbdat & TPS2211_OC) == 0) {
- printf (" *** Overcurrent - Safety shutdown ***\n");
- immap->im_ioport.iop_pcdat &= ~(TPS2211_VCCD0|TPS2211_VCCD1);
- return (1);
- }
- udelay (100);
- }
-
- debug ("Enable PCMCIA buffers and stop RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
-
- udelay(250000); /* some cards need >150 ms to come up :-( */
-
- debug ("# hardware_enable done\n");
-
- return (0);
-}
-
-
-#if defined(CONFIG_CMD_PCMCIA)
-int pcmcia_hardware_disable(int slot)
-{
- volatile immap_t *immap;
- volatile cpm8xx_t *cp;
- volatile pcmconf8xx_t *pcmp;
- u_long reg;
-
- debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
- immap = (immap_t *)CONFIG_SYS_IMMR;
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
-
- /* Configure PCMCIA General Control Register */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = 0;
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
-
- /* ALl voltages off / Hi-Z */
- immap->im_ioport.iop_pcdat |= (TPS2211_VPPD0 | TPS2211_VPPD1 |
- TPS2211_VCCD0 | TPS2211_VCCD1 );
-
- udelay(10000);
-
- return (0);
-}
-#endif
-
-
-int pcmcia_voltage_set(int slot, int vcc, int vpp)
-{
- volatile immap_t *immap;
- volatile pcmconf8xx_t *pcmp;
- u_long reg;
- ushort sreg;
-
- debug ("voltage_set: "
- PCMCIA_BOARD_MSG
- " Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
- 'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
- immap = (immap_t *)CONFIG_SYS_IMMR;
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
- /*
- * Disable PCMCIA buffers (isolate the interface)
- * and assert RESET signal
- */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- /*
- * Configure Port C pins for
- * 5 Volts Enable and 3 Volts enable,
- * Turn all power pins to Hi-Z
- */
- debug ("PCMCIA power OFF\n");
- cfg_ports (); /* Enables switch, but all in Hi-Z */
-
- sreg = immap->im_ioport.iop_pcdat;
- sreg |= TPS2211_VPPD0 | TPS2211_VPPD1; /* VAVPP always Hi-Z */
-
- switch(vcc) {
- case 0: break; /* Switch off */
- case 33: sreg |= TPS2211_VCCD0; /* Switch on 3.3V */
- sreg &= ~TPS2211_VCCD1;
- break;
- case 50: sreg &= ~TPS2211_VCCD0; /* Switch on 5.0V */
- sreg |= TPS2211_VCCD1;
- break;
- default: goto done;
- }
-
- /* Checking supported voltages */
-
- debug ("PIPR: 0x%x --> %s\n",
- pcmp->pcmc_pipr,
- (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-
- immap->im_ioport.iop_pcdat = sreg;
-
-#ifdef DEBUG
-{
- char *s;
-
- if ((sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) {
- s = "at 3.3V";
- } else if (!(sreg & TPS2211_VCCD0) && (sreg & TPS2211_VCCD1)) {
- s = "at 5.0V";
- } else {
- s = "down";
- }
- printf ("PCMCIA powered %s\n", s);
-}
-#endif
-
-done:
- debug ("Enable PCMCIA buffers and stop RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
- slot+'A');
- return (0);
-}
-
-#endif /* CONFIG_PCMCIA */
diff --git a/board/c2mon/u-boot.lds b/board/c2mon/u-boot.lds
deleted file mode 100644
index b854c18..0000000
--- a/board/c2mon/u-boot.lds
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * (C) Copyright 2001-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
- net/libnet.o (.text*)
-
- . = env_offset;
- common/env_embedded.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- #include <u-boot.lst>
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
diff --git a/board/c2mon/u-boot.lds.debug b/board/c2mon/u-boot.lds.debug
deleted file mode 100644
index 92796e6..0000000
--- a/board/c2mon/u-boot.lds.debug
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- #include <u-boot.lst>
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
diff --git a/board/esteem192e/u-boot.lds b/board/esteem192e/u-boot.lds
index 69f1500..fe5cf09 100644
--- a/board/esteem192e/u-boot.lds
+++ b/board/esteem192e/u-boot.lds
@@ -36,7 +36,6 @@
arch/powerpc/cpu/mpc8xx/traps.o (.text*)
net/libnet.o (.text*)
board/esteem192e/libesteem192e.o (.text*)
- *(.text.*printf)
. = env_offset;
common/env_embedded.o (.text*)
diff --git a/board/etx094/Makefile b/board/etx094/Makefile
deleted file mode 100644
index 6dc495c..0000000
--- a/board/etx094/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS = $(BOARD).o flash.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/etx094/etx094.c b/board/etx094/etx094.c
deleted file mode 100644
index abefe4a..0000000
--- a/board/etx094/etx094.c
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-static void read_hw_vers (void);
-
-/* ------------------------------------------------------------------------- */
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-const uint sdram_table[] = {
-
- /* single read (offset 0x00 in upm ram) */
-
- 0xEECEFC24, 0x100DFC24, 0xE02FBC04, 0x01AA7C04,
- 0x1FB5FC00, 0xFFFFFC05, _NOT_USED_, _NOT_USED_,
-
- /* burst read (offset 0x08 in upm ram) */
-
- 0xEECEFC24, 0x100DFC24, 0xE0FFBC04, 0x10FF7C04,
- 0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC00, 0xFFFFFC00,
- 0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* single write (offset 0x18 in upm ram) */
-
- 0xEECEFC24, 0x100DFC24, 0xE02BBC04, 0x01A27C00,
- 0xEFAAFC04, 0x1FB5FC05, _NOT_USED_, _NOT_USED_,
-
- /* burst write (offset 0x20 in upm ram) */
-
- 0xEECEFC24, 0x103DFC24, 0xE0FBBC00, 0x10F77C00,
- 0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC04, 0xFFFFFC05,
-
- /* init part1 (offset 0x28 in upm ram) */
-
- 0xEFFAFC3C, 0x1FF4FC34, 0xEFFCBC34, 0x1FFC3C34,
- 0xFFFC3C35, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* refresh (offset 0x30 in upm ram) */
-
- 0xEFFEBC0C, 0x1FFD7C04, 0xFFFFFC04, 0xFFFFFC05,
-
- /* init part2 (offset 0x34 in upm ram) */
-
- 0xFFFEBC04, 0xEFFC3CB4, 0x1FFC3C34, 0xFFFC3C34,
- 0xFFFC3C34, 0xEFE83CB4, 0x1FB57C35, _NOT_USED_,
-
- /* exception (offset 0x3C in upm ram) */
-
- 0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- *
- * Test ETX ID string (ETX_xxx...)
- *
- * Return 1 always.
- */
-
-int checkboard (void)
-{
- char buf[64];
- int i;
- int l = getenv_f("serial#", buf, sizeof(buf));
-
- puts ("Board: ");
-
-#ifdef SB_ETX094
- gd->board_type = 0; /* 0 = 2SDRAM-Device */
-#else
- gd->board_type = 1; /* 1 = 1SDRAM-Device */
-#endif
-
- if (l < 0 || strncmp(buf, "ETX_", 4)) {
- puts ("### No HW ID - assuming ETX_094\n");
- read_hw_vers ();
- return (0);
- }
-
- for (i = 0; i < l; ++i) {
- if (buf[i] == ' ')
- break;
- putc(buf[i]);
- }
- putc ('\n');
-
- read_hw_vers ();
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- long int size_b0, size_b1, size8, size9;
-
- upmconfig (UPMA, (uint *) sdram_table,
- sizeof (sdram_table) / sizeof (uint));
-
- /*
- * Preliminary prescaler for refresh (depends on number of
- * banks): This value is selected for four cycles every 62.4 us
- * with two SDRAM banks or four cycles every 31.2 us with one
- * bank. It will be adjusted after memory sizing.
- */
- memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K; /* MPTPR_PTP_DIV32 0x0200 */
-
- /* A3(SDRAM)=0 => Bursttype = Sequential
- * A2-A0(SDRAM)=010 => Burst length = 4
- * A4-A6(SDRAM)=010 => CasLat=2
- */
- memctl->memc_mar = 0x00000088;
-
- /*
- * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
- * preliminary addresses - these have to be modified after the
- * SDRAM size has been determined.
- */
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-
- if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
- }
-
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
-
- udelay (200);
-
- /* perform SDRAM initializsation sequence */
-
- memctl->memc_mcr = 0x80004128; /* SDRAM bank 0 (CS2) - Init Part 1 */
- memctl->memc_mcr = 0x80004734; /* SDRAM bank 0 (CS2) - Init Part 2 */
- udelay (1);
-
- if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
- memctl->memc_mcr = 0x80006128; /* SDRAM bank 1 (CS3) - Init Part 1 */
- memctl->memc_mcr = 0x80006734; /* SDRAM bank 1 (CS3) - Init Part 2 */
- udelay (1);
- }
-
- memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
-
- udelay (1000);
-
- /*
- * Check Bank 0 Memory Size for re-configuration
- *
- * try 8 column mode
- */
- size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM,
- SDRAM_MAX_SIZE);
-
- udelay (1000);
-
- /*
- * try 9 column mode
- */
- size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM,
- SDRAM_MAX_SIZE);
-
- if (size8 < size9) { /* leave configuration at 9 columns */
- size_b0 = size9;
-/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
- } else { /* back to 8 columns */
- size_b0 = size8;
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
- udelay (500);
-/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
- }
-
- if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
- /*
- * Check Bank 1 Memory Size
- * use current column settings
- * [9 column SDRAM may also be used in 8 column mode,
- * but then only half the real size will be used.]
- */
- size_b1 =
- dram_size (memctl->memc_mamr, (long *) SDRAM_BASE3_PRELIM,
- SDRAM_MAX_SIZE);
-/* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */
- } else {
- size_b1 = 0;
- }
-
- udelay (1000);
-
- /*
- * Adjust refresh rate depending on SDRAM type, both banks
- * For types > 128 MBit leave it at the current (fast) rate
- */
- if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
- /* reduce to 15.6 us (62.4 us / quad) */
- memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K; /*DIV16 */
- udelay (1000);
- }
-
- /*
- * Final mapping: map bigger bank first
- */
- if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */
-
- memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br3 =
- (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
- if (size_b0 > 0) {
- /*
- * Position Bank 0 immediately above Bank 1
- */
- memctl->memc_or2 =
- ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br2 =
- ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
- + size_b1;
- } else {
- unsigned long reg;
-
- /*
- * No bank 0
- *
- * invalidate bank
- */
- memctl->memc_br2 = 0;
-
- /* adjust refresh rate depending on SDRAM type, one bank */
- reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
- memctl->memc_mptpr = reg;
- }
-
- } else { /* SDRAM Bank 0 is bigger - map first */
-
- memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br2 =
- (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
- if (size_b1 > 0) {
- /*
- * Position Bank 1 immediately above Bank 0
- */
- memctl->memc_or3 =
- ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br3 =
- ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
- + size_b0;
- } else {
- unsigned long reg;
-
- /*
- * No bank 1
- *
- * invalidate bank
- */
- memctl->memc_br3 = 0;
-
- /* adjust refresh rate depending on SDRAM type, one bank */
- reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
- memctl->memc_mptpr = reg;
- }
- }
-
- udelay (10000);
-
- return (size_b0 + size_b1);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
- long int maxsize)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- memctl->memc_mamr = mamr_value;
-
- return (get_ram_size(base, maxsize));
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* HW-ID Table (Bits: 2^9;2^7;2^5) */
-#define HW_ID_0 0x0000
-#define HW_ID_1 0x0020
-#define HW_ID_2 0x0080
-#define HW_ID_3 0x00a0
-#define HW_ID_4 0x0200
-#define HW_ID_5 0x0220
-#define HW_ID_6 0x0280
-#define HW_ID_7 0x02a0
-
-void read_hw_vers ()
-{
- unsigned short rd_msk = 0x02A0;
-
- /* HW-ID pin-definition */
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- immr->im_ioport.iop_pddir &= ~(rd_msk);
- immr->im_ioport.iop_pdpar &= ~(rd_msk);
-
- /* debug printf("State of PD: %x\n",immr->im_ioport.iop_pddat); */
-
- /* Check the HW-ID */
- printf ("HW-Version: ");
- switch (immr->im_ioport.iop_pddat & rd_msk) {
- case HW_ID_0:
- printf ("V0.1 - V0.3 / W97238-Q3162-A1-1-2\n");
- break;
- case HW_ID_1:
- printf ("V0.9 / W50037-Q1-D6-1\n");
- break;
- case HW_ID_2:
- printf ("NOT USED - assuming ID#2\n");
- break;
- case HW_ID_3:
- printf ("NOT USED - assuming ID#3\n");
- break;
- case HW_ID_4:
- printf ("NOT USED - assuming ID#4\n");
- break;
- case HW_ID_5:
- printf ("NOT USED - assuming ID#5\n");
- break;
- case HW_ID_6:
- printf ("NOT USED - assuming ID#6\n");
- break;
- case HW_ID_7:
- printf ("NOT USED - assuming ID#7\n");
- break;
- default:
- printf ("###Error###\n");
- break;
- }
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/etx094/flash.c b/board/etx094/flash.c
deleted file mode 100644
index 0958e73..0000000
--- a/board/etx094/flash.c
+++ /dev/null
@@ -1,687 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long *addr, flash_info_t *info);
-static int write_word(flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets(ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size_b0;
- int i;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
- flash_info[i].flash_id = FLASH_UNKNOWN;
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-#ifdef CONFIG_FLASH_16BIT
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
- BR_MS_GPCM | BR_V | BR_PS_16; /* 16 Bit data port */
-#else
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
- BR_MS_GPCM | BR_V;
-#endif
-
- /* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE,
- &flash_info[0]);
-
- flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
- memctl->memc_br1 = 0; /* invalidate bank 1 */
-
- flash_info[0].size = size_b0;
-
- return size_b0;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets(ulong base, flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return;
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00002000);
-
- return;
- }
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
-#ifdef CONFIG_FLASH_16BIT
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
-#else
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
-#endif
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--)
- info->start[i] = base + i * 0x00020000;
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf("AMD ");
- break;
- case FLASH_MAN_FUJ:
- printf("FUJITSU ");
- break;
- case FLASH_MAN_SST:
- printf("SST ");
- break;
- case FLASH_MAN_STM:
- printf("STM ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM400B:
- printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T:
- printf("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B:
- printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T:
- printf("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B:
- printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T:
- printf("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B:
- printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T:
- printf("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- case FLASH_SST200A:
- printf("39xF200A (2M = 128K x 16)\n");
- break;
- case FLASH_SST400A:
- printf("39xF400A (4M = 256K x 16)\n");
- break;
- case FLASH_SST800A:
- printf("39xF800A (8M = 512K x 16)\n");
- break;
- case FLASH_STM800AB:
- printf("M29W800AB (8M = 512K x 16)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- break;
- }
-
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf("\n ");
- printf(" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size(vu_long *addr, flash_info_t *info)
-{
- short i;
- ulong value;
- ulong base = (ulong)addr;
-
- /* Write auto select command: read Manufacturer ID */
-#ifdef CONFIG_FLASH_16BIT
- vu_short *s_addr = (vu_short *)addr;
- s_addr[0x5555] = 0x00AA;
- s_addr[0x2AAA] = 0x0055;
- s_addr[0x5555] = 0x0090;
- value = s_addr[0];
- value = value|(value<<16);
-#else
- addr[0x5555] = 0x00AA00AA;
- addr[0x2AAA] = 0x00550055;
- addr[0x5555] = 0x00900090;
- value = addr[0];
-#endif
-
- switch (value) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- case STM_MANUFACT:
- info->flash_id = FLASH_MAN_STM;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return 0; /* no or unknown flash */
- }
-#ifdef CONFIG_FLASH_16BIT
- value = s_addr[1];
- value = value|(value<<16);
-#else
- value = addr[1]; /* device ID */
-#endif
-
- switch (value) {
- case AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
-#ifdef CONFIG_FLASH_16BIT
- info->sector_count = 19;
- info->size = 0x00100000; /* => 1 MB */
-#else
- info->sector_count = 19;
- info->size = 0x00200000; /* => 2 MB */
-#endif
- break;
-
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
-#ifdef CONFIG_FLASH_16BIT
- info->sector_count = 35;
- info->size = 0x00200000; /* => 2 MB */
-#else
- info->sector_count = 35;
- info->size = 0x00400000; /* => 4 MB */
-#endif
-
- break;
- case SST_ID_xF200A:
- info->flash_id += FLASH_SST200A;
- info->sector_count = 64; /* 39xF200A (2M = 128K x 16) */
- info->size = 0x00080000;
- break;
- case SST_ID_xF400A:
- info->flash_id += FLASH_SST400A;
- info->sector_count = 128; /* 39xF400A (4M = 256K x 16) */
- info->size = 0x00100000;
- break;
- case SST_ID_xF800A:
- info->flash_id += FLASH_SST800A;
- info->sector_count = 256; /* 39xF800A (8M = 512K x 16) */
- info->size = 0x00200000;
- break; /* => 2 MB */
- case STM_ID_x800AB:
- info->flash_id += FLASH_STM800AB;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
- default:
- info->flash_id = FLASH_UNKNOWN;
- return 0; /* => no or unknown flash */
-
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00002000);
- } else { /* AMD and Fujitsu types */
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
-#ifdef CONFIG_FLASH_16BIT
-
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++)
- info->start[i] = base +
- (i * 0x00010000) - 0x00030000;
-#else
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++)
- info->start[i] = base +
- (i * 0x00020000) - 0x00060000;
-#endif
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--)
- info->start[i] = base + i * 0x00020000;
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /*
- * read sector protection at sector address:
- * (A7 .. A0) = 0x02
- * D0 = 1 if protected
- */
-#ifdef CONFIG_FLASH_16BIT
- s_addr = (volatile unsigned short *)(info->start[i]);
- info->protect[i] = s_addr[2] & 1;
-#else
- addr = (volatile unsigned long *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
-#endif
- }
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
-#ifdef CONFIG_FLASH_16BIT
- s_addr = (volatile unsigned short *)(info->start[0]);
- *s_addr = 0x00F0; /* reset bank */
-#else
- addr = (volatile unsigned long *)info->start[0];
- *addr = 0x00F000F0; /* reset bank */
-#endif
-
- }
- return info->size;
-}
-
-int flash_erase(flash_info_t *info, int s_first, int s_last)
-{
- vu_long *addr = (vu_long *)(info->start[0]);
- int flag, prot, sect;
- ulong start, now, last;
-#ifdef CONFIG_FLASH_16BIT
- vu_short *s_addr = (vu_short *)addr;
-#endif
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN)
- printf("- missing\n");
- else
- printf("- no sectors to erase\n");
- return 1;
- }
-/*#ifndef CONFIG_FLASH_16BIT
- ulong type;
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_SST) && (type != FLASH_MAN_STM)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return;
- }
-#endif*/
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect])
- prot++;
- }
-
- if (prot) {
- printf("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf("\n");
- }
-
- start = get_timer(0);
- last = start;
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
-#ifdef CONFIG_FLASH_16BIT
- vu_short *s_sect_addr = (vu_short *)(info->start[sect]);
-#else
- vu_long *sect_addr = (vu_long *)(info->start[sect]);
-#endif
- /* Disable interrupts which might cause a timeout */
- flag = disable_interrupts();
-
-#ifdef CONFIG_FLASH_16BIT
-
- /*printf("\ns_sect_addr=%x",s_sect_addr);*/
- s_addr[0x5555] = 0x00AA;
- s_addr[0x2AAA] = 0x0055;
- s_addr[0x5555] = 0x0080;
- s_addr[0x5555] = 0x00AA;
- s_addr[0x2AAA] = 0x0055;
- s_sect_addr[0] = 0x0030;
-#else
- addr[0x5555] = 0x00AA00AA;
- addr[0x2AAA] = 0x00550055;
- addr[0x5555] = 0x00800080;
- addr[0x5555] = 0x00AA00AA;
- addr[0x2AAA] = 0x00550055;
- sect_addr[0] = 0x00300030;
-#endif
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay(1000);
-
-#ifdef CONFIG_FLASH_16BIT
- while ((s_sect_addr[0] & 0x0080) != 0x0080) {
-#else
- while ((sect_addr[0] & 0x00800080) != 0x00800080) {
-#endif
- now = get_timer(start);
- if (now > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf("Timeout\n");
- return 1;
- }
- /* show every second that we're waiting */
- if ((now - last) > 1000) {
- putc('.');
- last = now;
- }
- }
- }
- }
-
- /* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
-#ifdef CONFIG_FLASH_16BIT
- s_addr[0] = 0x00F0; /* reset bank */
-#else
- addr[0] = 0x00F000F0; /* reset bank */
-#endif
-
- printf(" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return 4;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- l = addr - wp;
-
- if (l != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp)
- data = (data << 8) | (*(uchar *)cp);
-
- for (; i < 4 && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp)
- data = (data << 8) | (*(uchar *)cp);
-
- rc = write_word(info, wp, data);
-
- if (rc != 0)
- return rc;
-
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i = 0; i < 4; ++i)
- data = (data << 8) | *src++;
-
- rc = write_word(info, wp, data);
- if (rc != 0)
- return rc;
-
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0)
- return 0;
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < 4; ++i, ++cp)
- data = (data << 8) | (*(uchar *)cp);
-
- return write_word(info, wp, data);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word(flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long *)(info->start[0]);
-
-#ifdef CONFIG_FLASH_16BIT
- vu_short high_data;
- vu_short low_data;
- vu_short *s_addr = (vu_short *)addr;
-#endif
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data)
- return 2;
-
-#ifdef CONFIG_FLASH_16BIT
- /* Write the 16 higher-bits */
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- high_data = ((data>>16) & 0x0000ffff);
-
- s_addr[0x5555] = 0x00AA;
- s_addr[0x2AAA] = 0x0055;
- s_addr[0x5555] = 0x00A0;
-
- *((vu_short *)dest) = high_data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer(0);
- while ((*((vu_short *)dest) & 0x0080) != (high_data & 0x0080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
- return 1;
- }
-
- /* Write the 16 lower-bits */
-#endif
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-#ifdef CONFIG_FLASH_16BIT
- dest += 0x2;
- low_data = (data & 0x0000ffff);
-
- s_addr[0x5555] = 0x00AA;
- s_addr[0x2AAA] = 0x0055;
- s_addr[0x5555] = 0x00A0;
- *((vu_short *)dest) = low_data;
-
-#else
- addr[0x5555] = 0x00AA00AA;
- addr[0x2AAA] = 0x00550055;
- addr[0x5555] = 0x00A000A0;
- *((vu_long *)dest) = data;
-#endif
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer(0);
-
-#ifdef CONFIG_FLASH_16BIT
- while ((*((vu_short *)dest) & 0x0080) != (low_data & 0x0080)) {
-#else
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-#endif
-
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
- return 1;
- }
- return 0;
-}
diff --git a/board/etx094/u-boot.lds b/board/etx094/u-boot.lds
deleted file mode 100644
index 56c3470..0000000
--- a/board/etx094/u-boot.lds
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- net/libnet.o (.text*)
- arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
- *(.text.vsprintf)
-
- . = env_offset;
- common/env_embedded.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- #include <u-boot.lst>
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
diff --git a/board/lantec/Makefile b/board/lantec/Makefile
deleted file mode 100644
index 12e4aa6..0000000
--- a/board/lantec/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS = $(BOARD).o flash.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/lantec/flash.c b/board/lantec/flash.c
deleted file mode 100644
index 97ed054..0000000
--- a/board/lantec/flash.c
+++ /dev/null
@@ -1,625 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Derived from ../tqm8xx/flash.c
- * [Torsten Stevens, FHG IMS; Bruno Achauer, Exet AG]
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_FLASH
-
-#ifdef DEBUG_FLASH
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size_b0, size_b1;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
-
- size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0: "
- "ID 0x%lx, Size = 0x%08lx = %ld MB\n",
- flash_info[0].flash_id,
- size_b0, size_b0<<20);
- }
-
- DEBUGF("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE5_PRELIM);
-
- size_b1 = flash_get_size((vu_long *)FLASH_BASE5_PRELIM, &flash_info[1]);
-
- DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
- if (size_b1 > size_b0) {
- printf ("## ERROR: "
- "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
- size_b1, size_b1<<20,
- size_b0, size_b0<<20
- );
- flash_info[0].flash_id = FLASH_UNKNOWN;
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[0].sector_count = -1;
- flash_info[1].sector_count = -1;
- flash_info[0].size = 0;
- flash_info[1].size = 0;
- return (0);
- }
-
- DEBUGF ("## Before remap: "
- "BR0: 0x%08x OR0: 0x%08x "
- "BR1: 0x%08x OR1: 0x%08x\n",
- memctl->memc_br0, memctl->memc_or0,
- memctl->memc_br1, memctl->memc_or1);
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | \
- BR_MS_GPCM | BR_PS_32 | BR_V;
-
- DEBUGF("## BR0: 0x%08x OR0: 0x%08x\n",
- memctl->memc_br0, memctl->memc_or0);
-
- /* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_info[0].size = size_b0;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
- &flash_info[0]);
-#endif
-
- if (size_b1) {
- memctl->memc_or5 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
- memctl->memc_br5 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
- BR_MS_GPCM | BR_PS_32 | BR_V;
-
- DEBUGF("## BR5: 0x%08x OR5: 0x%08x\n",
- memctl->memc_br5, memctl->memc_or5);
-
- /* Re-do sizing to get full correct info */
- size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
- &flash_info[1]);
-
- flash_info[1].size = size_b1;
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[1]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
- &flash_info[1]);
-#endif
- } else {
- memctl->memc_br5 = 0; /* invalidate bank */
- memctl->memc_or5 = 0; /* invalidate bank */
-
- DEBUGF("## DISABLE BR5: 0x%08x OR5: 0x%08x\n",
- memctl->memc_br5, memctl->memc_or5);
-
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
- flash_info[1].size = 0;
- }
-
- DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
- return (size_b0 + size_b1);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- ulong value;
- ulong base = (ulong)addr;
-
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00900090;
-
- value = addr[0];
-
- switch (value) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- value = addr[1]; /* device ID */
-
- switch (value) {
- case AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#if 0 /* enable when device IDs are available */
- case AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr = (volatile unsigned long *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr = (volatile unsigned long *)info->start[0];
-
- *addr = 0x00F000F0; /* reset bank */
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_long*)(info->start[sect]);
- addr[0] = 0x00300030;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_long*)(info->start[l_sect]);
- while ((addr[0] & 0x00800080) != 0x00800080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
- addr[0] = 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00A000A0;
-
- *((vu_long *)dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/lantec/lantec.c b/board/lantec/lantec.c
deleted file mode 100644
index 6d3486c..0000000
--- a/board/lantec/lantec.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2001
- * Torsten Stevens, FHG IMS, stevens@ims.fhg.de
- * Bruno Achauer, Exet AG, bruno@exet-ag.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Derived from ../tqm8xx/tqm8xx.c
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-const uint sdram_table[] = {
- /*
- * Single Read. (Offset 0 in UPMA RAM)
- */
- 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
- 0x1ff77c47, /* last */
- /*
- * SDRAM Initialization (offset 5 in UPMA RAM)
- *
- * This is no UPM entry point. The following definition uses
- * the remaining space to establish an initialization
- * sequence, which is executed by a RUN command.
- *
- */
- 0x1ff77c35, 0xefeabc34, 0x1fb57c35, /* last */
- /*
- * Burst Read. (Offset 8 in UPMA RAM)
- */
- 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
- 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Single Write. (Offset 18 in UPMA RAM)
- */
- 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Burst Write. (Offset 20 in UPMA RAM)
- */
- 0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
- 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, /* last */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Refresh (Offset 30 in UPMA RAM)
- */
- 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- 0xfffffc84, 0xfffffc07, 0xfffffc07, /* last */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Exception. (Offset 3c in UPMA RAM)
- */
- 0x7ffffc07, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- *
- * Test TQ ID string (TQM8xx...)
- * If present, check for "L" type (no second DRAM bank),
- * otherwise "L" type is assumed as default.
- *
- * Return 1 for "L" type, 0 else.
- */
-
-int checkboard (void)
-{
- printf ("Board: Lantec special edition rev.%d\n", CONFIG_LANTEC);
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- long int size_b0;
- int i;
-
- /*
- * Configure UPMA for SDRAM
- */
- upmconfig (UPMA, (uint *) sdram_table,
- sizeof (sdram_table) / sizeof (uint));
-
- memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K /* XXX CONFIG_SYS_MPTPR XXX */ ;
-
- /* burst length=4, burst type=sequential, CAS latency=2 */
- memctl->memc_mar = 0x00000088;
-
- /*
- * Map controller bank 3 to the SDRAM bank at preliminary address.
- */
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-
- /* initialize memory address register */
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; /* refresh not enabled yet */
-
- /* mode initialization (offset 5) */
- udelay (200); /* 0x80006105 */
- memctl->memc_mcr =
- MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x05);
-
- /* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */
- udelay (1); /* 0x80006130 */
- memctl->memc_mcr =
- MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30);
- udelay (1); /* 0x80006130 */
- memctl->memc_mcr =
- MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30);
-
- udelay (1); /* 0x80006106 */
- memctl->memc_mcr =
- MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06);
-
- memctl->memc_mamr |= MAMR_PTAE; /* refresh enabled */
-
- udelay (200);
-
- /* Need at least 10 DRAM accesses to stabilize */
- for (i = 0; i < 10; ++i) {
- volatile unsigned long *addr =
- (volatile unsigned long *) SDRAM_BASE3_PRELIM;
- unsigned long val;
-
- val = *(addr + i);
- *(addr + i) = val;
- }
-
- /*
- * Check Bank 0 Memory Size for re-configuration
- */
- size_b0 = dram_size (CONFIG_SYS_MAMR_8COL,
- (long *) SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
-
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL | MAMR_PTAE;
-
- /*
- * Final mapping:
- */
-
- memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
- udelay (1000);
-
- return (size_b0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
- long int maxsize)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- memctl->memc_mamr = mamr_value;
-
- return (get_ram_size (base, maxsize));
-}
diff --git a/board/lantec/u-boot.lds b/board/lantec/u-boot.lds
deleted file mode 100644
index 9411802..0000000
--- a/board/lantec/u-boot.lds
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- net/libnet.o (.text*)
- arch/powerpc/lib/libpowerpc.o (.text*)
- drivers/rtc/librtc.o (.text*)
-
- . = env_offset;
- common/env_embedded.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- #include <u-boot.lst>
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
diff --git a/board/lantec/u-boot.lds.debug b/board/lantec/u-boot.lds.debug
deleted file mode 100644
index e788f5c..0000000
--- a/board/lantec/u-boot.lds.debug
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- #include <u-boot.lst>
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
diff --git a/board/siemens/IAD210/IAD210.c b/board/siemens/IAD210/IAD210.c
deleted file mode 100644
index 7325a93..0000000
--- a/board/siemens/IAD210/IAD210.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * (C) Copyright 2001
- * Paul Geerinckx
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <net.h>
-#include "atm.h"
-#include <i2c.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-/* used PLD registers */
-# define PLD_GCR1_REG (unsigned char *) (0x10000000 + 0)
-# define PLD_EXT_RES (unsigned char *) (0x10000000 + 10)
-# define PLD_EXT_FETH (unsigned char *) (0x10000000 + 11)
-# define PLD_EXT_LED (unsigned char *) (0x10000000 + 12)
-# define PLD_EXT_X21 (unsigned char *) (0x10000000 + 13)
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-const uint sdram_table[] = {
- /*
- * Single Read. (Offset 0 in UPMA RAM)
- */
- 0xFE2DB004, 0xF0AA7004, 0xF0A5F400, 0xF3AFFC47, /* last */
- _NOT_USED_,
- /*
- * SDRAM Initialization (offset 5 in UPMA RAM)
- *
- * This is no UPM entry point. The following definition uses
- * the remaining space to establish an initialization
- * sequence, which is executed by a RUN command.
- *
- */
- 0xFFFAF834, 0xFFE5B435, /* last */
- _NOT_USED_,
- /*
- * Burst Read. (Offset 8 in UPMA RAM)
- */
- 0xFE2DB004, 0xF0AF7404, 0xF0AFFC00, 0xF0AFFC00,
- 0xF0AFFC00, 0xF0AAF800, 0xF1A5E447, /* last */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Single Write. (Offset 18 in UPMA RAM)
- */
- 0xFE29B300, 0xF1A27304, 0xFFA5F747, /* last */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Burst Write. (Offset 20 in UPMA RAM)
- */
- 0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
- 0xF1AAF804, 0xFFA5F447, /* last */
- _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Refresh (Offset 30 in UPMA RAM)
- */
- 0xFFAC3884, 0xFFAC3404, 0xFFAFFC04, 0xFFAFFC84,
- 0xFFAFFC07, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * MRS sequence (Offset 38 in UPMA RAM)
- */
- 0xFFAAB834, 0xFFA57434, 0xFFAFFC05, /* last */
- _NOT_USED_,
- /*
- * Exception. (Offset 3c in UPMA RAM)
- */
- 0xFFAFFC04, 0xFFAFFC05, /* last */
- _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- volatile iop8xx_t *iop = &immap->im_ioport;
- volatile fec_t *fecp = &immap->im_cpm.cp_fec;
- long int size;
-
- upmconfig (UPMA, (uint *) sdram_table,
- sizeof (sdram_table) / sizeof (uint));
-
- /*
- * Preliminary prescaler for refresh (depends on number of
- * banks): This value is selected for four cycles every 62.4 us
- * with two SDRAM banks or four cycles every 31.2 us with one
- * bank. It will be adjusted after memory sizing.
- */
- memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
- memctl->memc_mar = 0x00000088;
-
- /*
- * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
- * preliminary addresses - these have to be modified after the
- * SDRAM size has been determined.
- */
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-
- memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
-
- udelay (200);
-
- /* perform SDRAM initializsation sequence */
-
- memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */
- udelay (1);
- memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */
- udelay (1);
-
- memctl->memc_mcr = 0x80004105; /* SDRAM precharge */
- udelay (1);
- memctl->memc_mcr = 0x80004030; /* SDRAM 16x autorefresh */
- udelay (1);
- memctl->memc_mcr = 0x80004138; /* SDRAM upload parameters */
- udelay (1);
-
- memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
-
- udelay (1000);
-
- /*
- * Check Bank 0 Memory Size for re-configuration
- *
- */
- size = dram_size (CONFIG_SYS_MAMR, (long *) SDRAM_BASE_PRELIM,
- SDRAM_MAX_SIZE);
-
- udelay (1000);
-
-
- memctl->memc_mamr = CONFIG_SYS_MAMR;
- udelay (1000);
-
- /*
- * Final mapping
- */
- memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V);
-
- udelay (10000);
-
- /* prepare pin multiplexing for fast ethernet */
-
- atmLoad ();
- fecp->fec_ecntrl = 0x00000004; /* rev D3 pinmux SET */
- iop->iop_pdpar |= 0x0080; /* set pin as MII_clock */
-
-
- return (size);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
- long int maxsize)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- memctl->memc_mamr = mamr_value;
-
- return (get_ram_size (base, maxsize));
-}
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
- return (0);
-}
-
-void board_serial_init (void)
-{
- ; /* nothing to do here */
-}
-
-void board_ether_init (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile iop8xx_t *iop = &immap->im_ioport;
- volatile fec_t *fecp = &immap->im_cpm.cp_fec;
-
- atmLoad ();
- fecp->fec_ecntrl = 0x00000004; /* rev D3 pinmux SET */
- iop->iop_pdpar |= 0x0080; /* set pin as MII_clock */
-}
-
-int board_early_init_f (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- volatile iop8xx_t *iop = &immap->im_ioport;
-
- /* configure the LED timing output pins - port A pin 4 */
- iop->iop_papar = 0x0800;
- iop->iop_padir = 0x0800;
-
- /* start timer 2 for the 4hz LED blink rate */
- timers->cpmt_tmr2 = 0xff2c; /* 4HZ for 64MHz */
- timers->cpmt_trr2 = 0x000003d0; /* clk/16 , prescale=256 */
- timers->cpmt_tgcr = 0x00000810; /* run timer 2 */
-
- /* chip select for PLD access */
- memctl->memc_br6 = 0x10000401;
- memctl->memc_or6 = 0xFC000908;
-
- /* PLD initial values ( set LEDs, remove reset on LXT) */
-
- *PLD_GCR1_REG = 0x06;
- *PLD_EXT_RES = 0xC0;
- *PLD_EXT_FETH = 0x40;
- *PLD_EXT_LED = 0xFF;
- *PLD_EXT_X21 = 0x04;
- return 0;
-}
-
-static void board_get_enetaddr(uchar *addr)
-{
- int i;
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpm = &immap->im_cpm;
- unsigned int rccrtmp;
-
- char default_mac_addr[] = { 0x00, 0x08, 0x01, 0x02, 0x03, 0x04 };
-
- for (i = 0; i < 6; i++)
- addr[i] = default_mac_addr[i];
-
- printf ("There is an error in the i2c driver .. /n");
- printf ("You need to fix it first....../n");
-
- rccrtmp = cpm->cp_rccr;
- cpm->cp_rccr |= 0x0020;
-
- i2c_reg_read (0xa0, 0);
- printf ("seep = '-%c-%c-%c-%c-%c-%c-'\n",
- i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0),
- i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0),
- i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0));
-
- cpm->cp_rccr = rccrtmp;
-}
-
-int misc_init_r(void)
-{
- uchar enetaddr[6];
-
- if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
- board_get_enetaddr(enetaddr);
- eth_setenv_enetaddr("ethaddr", enetaddr);
- }
-
- return 0;
-}
diff --git a/board/siemens/IAD210/Makefile b/board/siemens/IAD210/Makefile
deleted file mode 100644
index bb81507..0000000
--- a/board/siemens/IAD210/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS = $(BOARD).o flash.o atm.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/siemens/IAD210/atm.c b/board/siemens/IAD210/atm.c
deleted file mode 100644
index 40aad0a..0000000
--- a/board/siemens/IAD210/atm.c
+++ /dev/null
@@ -1,652 +0,0 @@
-#include <common.h>
-#include <mpc8xx.h>
-#include <commproc.h>
-
-#include "atm.h"
-#include <linux/stddef.h>
-
-#define SYNC __asm__("sync")
-#define MY_ALIGN(p, a) ((char *)(((uint32)(p)+(a)-1) & ~((uint32)(a)-1)))
-
-#define FALSE 1
-#define TRUE 0
-#define OK 0
-#define ERROR -1
-
-struct atm_connection_t g_conn[NUM_CONNECTIONS] =
-{
- { NULL, 10, NULL, 10, NULL, NULL, NULL, NULL }, /* OAM */
-};
-
-struct atm_driver_t g_atm =
-{
- FALSE, /* loaded */
- FALSE, /* started */
- NULL, /* csram */
- 0, /* csram_size */
- NULL, /* am_top */
- NULL, /* ap_top */
- NULL, /* int_reload_ptr */
- NULL, /* int_serv_ptr */
- NULL, /* rbd_base_ptr */
- NULL, /* tbd_base_ptr */
- 0 /* linerate */
-};
-
-char csram[1024]; /* more than enough for doing nothing*/
-
-int atmLoad(void);
-void atmUnload(void);
-int atmMemInit(void);
-void atmIntInit(void);
-void atmApcInit(void);
-void atmAmtInit(void);
-void atmCpmInit(void);
-void atmUtpInit(void);
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmLoad
- *
- * DESCRIPTION: Basic ATM initialization.
- *
- * PARAMETERS: none
- *
- * RETURNS: OK or ERROR
- *
- ****************************************************************************/
-int atmLoad()
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
- volatile iop8xx_t *iop = &immap->im_ioport;
-
- timers->cpmt_tgcr &= 0x0FFF; SYNC; /* Disable Timer 4 */
- immap->im_cpm.cp_scc[3].scc_gsmrl = 0x0; SYNC; /* Disable SCC4 */
- iop->iop_pdpar &= 0x3FFF; SYNC; /* Disable SAR and UTOPIA */
-
- if ( atmMemInit() != OK ) return ERROR;
-
- atmIntInit();
- atmApcInit();
- atmAmtInit();
- atmCpmInit();
- atmUtpInit();
-
- g_atm.loaded = TRUE;
-
- return OK;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmUnload
- *
- * DESCRIPTION: Disables ATM and UTOPIA.
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- ****************************************************************************/
-void atmUnload()
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
- volatile iop8xx_t *iop = &immap->im_ioport;
-
- timers->cpmt_tgcr &= 0x0FFF; SYNC; /* Disable Timer 4 */
- immap->im_cpm.cp_scc[3].scc_gsmrl = 0x0; SYNC; /* Disable SCC4 */
- iop->iop_pdpar &= 0x3FFF; SYNC; /* Disable SAR and UTOPIA */
- g_atm.loaded = FALSE;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmMemInit
- *
- * DESCRIPTION:
- *
- * The ATM driver uses the following resources:
- *
- * A. Memory in DPRAM to hold
- *
- * 1/ CT = Connection Table ( RCT & TCT )
- * 2/ TCTE = Transmit Connection Table Extension
- * 3/ MPHYPT = Multi-PHY Pointing Table
- * 4/ APCP = APC Parameter Table
- * 5/ APCT_PRIO_1 = APC Table ( priority 1 for AAL1/2 )
- * 6/ APCT_PRIO_2 = APC Table ( priority 2 for VBR )
- * 7/ APCT_PRIO_3 = APC Table ( priority 3 for UBR )
- * 8/ TQ = Transmit Queue
- * 9/ AM = Address Matching Table
- * 10/ AP = Address Pointing Table
- *
- * B. Memory in cache safe RAM to hold
- *
- * 1/ INT = Interrupt Queue
- * 2/ RBD = Receive Buffer Descriptors
- * 3/ TBD = Transmit Buffer Descriptors
- *
- * This function
- * 1. clears the ATM DPRAM area,
- * 2. Allocates and clears cache safe memory,
- * 3. Initializes 'g_conn'.
- *
- * PARAMETERS: none
- *
- * RETURNS: OK or ERROR
- *
- ****************************************************************************/
-int atmMemInit()
-{
- int i;
- unsigned immr = CONFIG_SYS_IMMR;
- int total_num_rbd = 0;
- int total_num_tbd = 0;
-
- memset((char *)CONFIG_SYS_IMMR + 0x2000 + ATM_DPRAM_BEGIN, 0x00, ATM_DPRAM_SIZE);
-
- g_atm.csram_size = NUM_INT_ENTRIES * SIZE_OF_INT_ENTRY;
-
- for ( i = 0; i < NUM_CONNECTIONS; ++i ) {
- total_num_rbd += g_conn[i].num_rbd;
- total_num_tbd += g_conn[i].num_tbd;
- }
-
- g_atm.csram_size += total_num_rbd * SIZE_OF_RBD + total_num_tbd * SIZE_OF_TBD + 4;
-
- g_atm.csram = &csram[0];
- memset(&(g_atm.csram), 0x00, g_atm.csram_size);
-
- g_atm.int_reload_ptr = (uint32 *)MY_ALIGN(g_atm.csram, 4);
- g_atm.rbd_base_ptr = (struct atm_bd_t *)(g_atm.int_reload_ptr + NUM_INT_ENTRIES);
- g_atm.tbd_base_ptr = (struct atm_bd_t *)(g_atm.rbd_base_ptr + total_num_rbd);
-
- g_conn[0].rbd_ptr = g_atm.rbd_base_ptr;
- g_conn[0].tbd_ptr = g_atm.tbd_base_ptr;
- g_conn[0].ct_ptr = CT_PTR(immr);
- g_conn[0].tcte_ptr = TCTE_PTR(immr);
-
- return OK;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmIntInit
- *
- * DESCRIPTION:
- *
- * Initialization of the MPC860 ESAR Interrupt Queue.
- * This function
- * - clears all entries in the INT,
- * - sets the WRAP bit of the last INT entry,
- * - initializes the 'int_serv_ptr' attribuut of the AtmDriver structure
- * to the first INT entry.
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- * REMARKS:
- *
- * - The INT resides in external cache safe memory.
- * - The base address of the INT is stored in g_atm.int_reload_ptr.
- * - The number of entries in the INT is given by NUM_INT_ENTRIES.
- * - The INTBASE field in SAR Parameter RAM is set by atmCpmInit().
- *
- ****************************************************************************/
-void atmIntInit()
-{
- int i;
- for ( i = 0; i < NUM_INT_ENTRIES - 1; ++i) g_atm.int_reload_ptr[i] = 0;
- g_atm.int_reload_ptr[i] = INT_WRAP;
- g_atm.int_serv_ptr = g_atm.int_reload_ptr;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmApcInit
- *
- * DESCRIPTION:
- *
- * This function initializes the following ATM Pace Controller related
- * data structures:
- *
- * - 1 MPHY Pointing Table (contains only one entry)
- * - 3 APC Parameter Tables (one PHY with 3 priorities)
- * - 3 APC Tables (one table for each priority)
- * - 1 Transmit Queue (one transmit queue per PHY)
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- ****************************************************************************/
-void atmApcInit()
-{
- int i;
- /* unsigned immr = CONFIG_SYS_IMMR; */
- uint16 * mphypt_ptr = MPHYPT_PTR(CONFIG_SYS_IMMR);
- struct apc_params_t * apcp_ptr = APCP_PTR(CONFIG_SYS_IMMR);
- uint16 * apct_prio1_ptr = APCT1_PTR(CONFIG_SYS_IMMR);
- uint16 * tq_ptr = TQ_PTR(CONFIG_SYS_IMMR);
- /***************************************************/
- /* Initialize MPHY Pointing Table (only one entry) */
- /***************************************************/
- *mphypt_ptr = APCP_BASE;
-
- /********************************************/
- /* Initialize APC parameters for priority 1 */
- /********************************************/
- apcp_ptr->apct_base1 = APCT_PRIO_1_BASE;
- apcp_ptr->apct_end1 = APCT_PRIO_1_BASE + NUM_APCT_PRIO_1_ENTRIES * 2;
- apcp_ptr->apct_ptr1 = APCT_PRIO_1_BASE;
- apcp_ptr->apct_sptr1 = APCT_PRIO_1_BASE;
- apcp_ptr->etqbase = TQ_BASE;
- apcp_ptr->etqend = TQ_BASE + ( NUM_TQ_ENTRIES - 1 ) * 2;
- apcp_ptr->etqaptr = TQ_BASE;
- apcp_ptr->etqtptr = TQ_BASE;
- apcp_ptr->apc_mi = 8;
- apcp_ptr->ncits = 0x0100; /* NCITS = 1 */
- apcp_ptr->apcnt = 0;
- apcp_ptr->reserved1 = 0;
- apcp_ptr->eapcst = 0x2009; /* LAST, ESAR, MPHY */
- apcp_ptr->ptp_counter = 0;
- apcp_ptr->ptp_txch = 0;
- apcp_ptr->reserved2 = 0;
-
-
- /***************************************************/
- /* Initialize APC Tables with empty slots (0xFFFF) */
- /***************************************************/
- for ( i = 0; i < NUM_APCT_PRIO_1_ENTRIES; ++i ) *(apct_prio1_ptr++) = 0xFFFF;
-
- /************************/
- /* Clear Transmit Queue */
- /************************/
- for ( i = 0; i < NUM_TQ_ENTRIES; ++i ) *(tq_ptr++) = 0;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmAmtInit
- *
- * DESCRIPTION:
- *
- * This function clears the first entry in the Address Matching Table and
- * lets the first entry in the Address Pointing table point to the first
- * entry in the TCT table (i.e. the raw cell channel).
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- * REMARKS:
- *
- * The values for the AMBASE, AMEND and APBASE registers in SAR parameter
- * RAM are initialized by atmCpmInit().
- *
- ****************************************************************************/
-void atmAmtInit()
-{
- unsigned immr = CONFIG_SYS_IMMR;
-
- g_atm.am_top = AM_PTR(immr);
- g_atm.ap_top = AP_PTR(immr);
-
- *(g_atm.ap_top--) = CT_BASE;
- *(g_atm.am_top--) = 0;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmCpmInit
- *
- * DESCRIPTION:
- *
- * This function initializes the Utopia Interface Parameter RAM Map
- * (SCC4, ATM Protocol) of the Communication Processor Modudule.
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- ****************************************************************************/
-void atmCpmInit()
-{
- unsigned immr = CONFIG_SYS_IMMR;
-
- memset((char *)immr + 0x3F00, 0x00, 0xC0);
-
- /*-----------------------------------------------------------------*/
- /* RBDBASE - Receive buffer descriptors base address */
- /* The RBDs reside in cache safe external memory. */
- /*-----------------------------------------------------------------*/
- *RBDBASE(immr) = (uint32)g_atm.rbd_base_ptr;
-
- /*-----------------------------------------------------------------*/
- /* SRFCR - SAR receive function code */
- /* 0-2 rsvd = 000 */
- /* 3-4 BO = 11 Byte ordering (big endian). */
- /* 5-7 FC = 000 Value driven on the address type signals AT[1-3] */
- /* when the SDMA channel accesses memory. */
- /*-----------------------------------------------------------------*/
- *SRFCR(immr) = 0x18;
-
- /*-----------------------------------------------------------------*/
- /* SRSTATE - SAR receive status */
- /* 0 EXT = 0 Extended mode off. */
- /* 1 ACP = 0 Valid only if EXT = 1. */
- /* 2 EC = 0 Standard 53-byte ATM cell. */
- /* 3 SNC = 0 In sync. Must be set to 0 during initialization. */
- /* 4 ESAR = 1 Enhanced SAR functionality enabled. */
- /* 5 MCF = 1 Management Cell Filter active. */
- /* 6 SER = 0 UTOPIA mode. */
- /* 7 MPY = 1 Multiple PHY mode. */
- /*-----------------------------------------------------------------*/
- *SRSTATE(immr) = 0x0D;
-
- /*-----------------------------------------------------------------*/
- /* MRBLR - Maximum receive buffer length register. */
- /* Must be cleared for ATM operation (see also SMRBLR). */
- /*-----------------------------------------------------------------*/
- *MRBLR(immr) = 0;
-
- /*-----------------------------------------------------------------*/
- /* RSTATE - SCC internal receive state parameters */
- /* The first byte must be initialized with the value of SRFCR. */
- /*-----------------------------------------------------------------*/
- *RSTATE(immr) = (uint32)(*SRFCR(immr)) << 24;
-
- /*-----------------------------------------------------------------*/
- /* STFCR - SAR transmit function code */
- /* 0-2 rsvd = 000 */
- /* 3-4 BO = 11 Byte ordering (big endian). */
- /* 5-7 FC = 000 Value driven on the address type signals AT[1-3] */
- /* when the SDMA channel accesses memory. */
- /*-----------------------------------------------------------------*/
- *STFCR(immr) = 0x18;
-
- /*-----------------------------------------------------------------*/
- /* SRSTATE - SAR transmit status */
- /* 0 EXT = 0 : Extended mode off */
- /* 1 rsvd = 0 : */
- /* 2 EC = 0 : Standard 53-byte ATM cell */
- /* 3 rsvd = 0 : */
- /* 4 ESAR = 1 : Enhanced SAR functionality enabled */
- /* 5 rsvd = 0 : */
- /* 6 SER = 0 : UTOPIA mode */
- /* 7 MPY = 1 : Multiple PHY mode */
- /*-----------------------------------------------------------------*/
- *STSTATE(immr) = 0x09;
-
- /*-----------------------------------------------------------------*/
- /* TBDBASE - Transmit buffer descriptors base address */
- /* The TBDs reside in cache safe external memory. */
- /*-----------------------------------------------------------------*/
- *TBDBASE(immr) = (uint32)g_atm.tbd_base_ptr;
-
- /*-----------------------------------------------------------------*/
- /* TSTATE - SCC internal transmit state parameters */
- /* The first byte must be initialized with the value of STFCR. */
- /*-----------------------------------------------------------------*/
- *TSTATE(immr) = (uint32)(*STFCR(immr)) << 24;
-
- /*-----------------------------------------------------------------*/
- /* CTBASE - Connection table base address */
- /* Offset from the beginning of DPRAM (64-byte aligned). */
- /*-----------------------------------------------------------------*/
- *CTBASE(immr) = CT_BASE;
-
- /*-----------------------------------------------------------------*/
- /* INTBASE - Interrupt queue base pointer. */
- /* The interrupt queue resides in cache safe external memory. */
- /*-----------------------------------------------------------------*/
- *INTBASE(immr) = (uint32)g_atm.int_reload_ptr;
-
- /*-----------------------------------------------------------------*/
- /* INTPTR - Pointer into interrupt queue. */
- /* Initialize to INTBASE. */
- /*-----------------------------------------------------------------*/
- *INTPTR(immr) = *INTBASE(immr);
-
- /*-----------------------------------------------------------------*/
- /* C_MASK - Constant mask for CRC32 */
- /* Must be initialized to 0xDEBB20E3. */
- /*-----------------------------------------------------------------*/
- *C_MASK(immr) = 0xDEBB20E3;
-
- /*-----------------------------------------------------------------*/
- /* INT_ICNT - Interrupt threshold value */
- /*-----------------------------------------------------------------*/
- *INT_ICNT(immr) = 1;
-
- /*-----------------------------------------------------------------*/
- /* INT_CNT - Interrupt counter */
- /* Initalize to INT_ICNT. Decremented for each interrupt entry */
- /* reported in the interrupt queue. On zero an interrupt is */
- /* signaled to the host by setting the GINT bit in the event */
- /* register. The counter is reinitialized with INT_ICNT. */
- /*-----------------------------------------------------------------*/
- *INT_CNT(immr) = *INT_ICNT(immr);
-
- /*-----------------------------------------------------------------*/
- /* SMRBLR - SAR maximum receive buffer length register. */
- /* Must be a multiple of 48 bytes. Common for all ATM connections. */
- /*-----------------------------------------------------------------*/
- *SMRBLR(immr) = SAR_RXB_SIZE;
-
- /*-----------------------------------------------------------------*/
- /* APCST - APC status register. */
- /* 0 rsvd 0 */
- /* 1-2 CSER 11 Initialize with the same value as NSER. */
- /* 3-4 NSER 11 Next serial or UTOPIA channel. */
- /* 5-7 rsvd 000 */
- /* 8-10 rsvd 000 */
- /* 11 rsvd 0 */
- /* 12 ESAR 1 UTOPIA Level 2 MPHY enabled. */
- /* 13 DIS 0 APC disable. Must be initiazed to 0. */
- /* 14 PL2 0 Not used. */
- /* 15 MPY 1 Multiple PHY mode on. */
- /*-----------------------------------------------------------------*/
- *APCST(immr) = 0x7809;
-
- /*-----------------------------------------------------------------*/
- /* APCPTR - Pointer to the APC parameter table */
- /* In MPHY master mode this parameter points to the MPHY pointing */
- /* table. 2-byte aligned. */
- /*-----------------------------------------------------------------*/
- *APCPTR(immr) = MPHYPT_BASE;
-
- /*-----------------------------------------------------------------*/
- /* HMASK - Header mask */
- /* Each incoming cell is masked with HMASK before being compared */
- /* to the entries in the address matching table. */
- /*-----------------------------------------------------------------*/
- *HMASK(immr) = AM_HMASK;
-
- /*-----------------------------------------------------------------*/
- /* AMBASE - Address matching table base address */
- /*-----------------------------------------------------------------*/
- *AMBASE(immr) = AM_BASE;
-
- /*-----------------------------------------------------------------*/
- /* AMEND - Address matching table end address */
- /*-----------------------------------------------------------------*/
- *AMEND(immr) = AM_BASE;
-
- /*-----------------------------------------------------------------*/
- /* APBASE - Address pointing table base address */
- /*-----------------------------------------------------------------*/
- *APBASE(immr) = AP_BASE;
-
- /*-----------------------------------------------------------------*/
- /* MPHYST - MPHY status register */
- /* 0-1 rsvd 00 */
- /* 2-6 NMPHY 00000 1 PHY */
- /* 7-9 rsvd 000 */
- /* 10-14 CMPHY 00000 Initialize with same value as NMPHY */
- /*-----------------------------------------------------------------*/
- *MPHYST(immr) = 0x0000;
-
- /*-----------------------------------------------------------------*/
- /* TCTEBASE - Transmit connection table extension base address */
- /* Offset from the beginning of DPRAM (32-byte aligned). */
- /*-----------------------------------------------------------------*/
- *TCTEBASE(immr) = TCTE_BASE;
-
- /*-----------------------------------------------------------------*/
- /* Clear not used registers. */
- /*-----------------------------------------------------------------*/
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmUtpInit
- *
- * DESCRIPTION:
- *
- * This function initializes the ATM interface for
- *
- * - UTOPIA mode
- * - muxed bus
- * - master operation
- * - multi PHY (because of a bug in the MPC860P rev. E.0)
- * - internal clock = SYSCLK / 2
- *
- * EXTERNAL EFFECTS:
- *
- * After calling this function, the MPC860ESAR UTOPIA bus is
- * active and uses the following ports/pins:
- *
- * Port Pin Signal Description
- * ------ --- ------- -------------------------------------------
- * PB[15] R17 TxClav Transmit cell available input/output signal
- * PC[15] D16 RxClav Receive cell available input/output signal
- * PD[15] U17 UTPB[0] UTOPIA bus bit 0 input/output signal
- * PD[14] V19 UTPB[1] UTOPIA bus bit 1 input/output signal
- * PD[13] V18 UTPB[2] UTOPIA bus bit 2 input/output signal
- * PD[12] R16 UTPB[3] UTOPIA bus bit 3 input/output signal
- * PD[11] T16 RXENB Receive enable input/output signal
- * PD[10] W18 TXENB Transmit enable input/output signal
- * PD[9] V17 UTPCLK UTOPIA clock input/output signal
- * PD[7] T15 UTPB[4] UTOPIA bus bit 4 input/output signal
- * PD[6] V16 UTPB[5] UTOPIA bus bit 5 input/output signal
- * PD[5] U15 UTPB[6] UTOPIA bus bit 6 input/output signal
- * PD[4] U16 UTPB[7] UTOPIA bus bit 7 input/output signal
- * PD[3] W16 SOC Start of cell input/output signal
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- * REMARK:
- *
- * The ATM parameters and data structures must be configured before
- * initializing the UTOPIA port. The UTOPIA port activates immediately
- * upon initialization, and if its associated data structures are not
- * initialized, the CPM will lock up.
- *
- ****************************************************************************/
-void atmUtpInit()
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile iop8xx_t *iop = &immap->im_ioport;
- volatile car8xx_t *car = &immap->im_clkrst;
- volatile cpm8xx_t *cpm = &immap->im_cpm;
- int flag;
-
- flag = disable_interrupts();
-
- /*-----------------------------------------------------------------*/
- /* SCCR - System Clock Control Register */
- /* */
- /* The UTOPIA clock can be selected to be internal clock or */
- /* external clock (selected by the UTOPIA mode register). */
- /* In case of internal clock, the UTOPIA clock is derived from */
- /* the system frequency divided by two dividers. */
- /* Bits 27-31 of the SCCR register are defined to control the */
- /* UTOPIA clock. */
- /* */
- /* SCCR[27:29] DFUTP Division factor. Divide the system clock */
- /* by 2^DFUTP. */
- /* SCCR[30:31] DFAUTP Additional division factor. Divide the */
- /* system clock by the following value: */
- /* 00 = divide by 1 */
- /* 00 = divide by 3 */
- /* 10 = divide by 5 */
- /* 11 = divide by 7 */
- /* */
- /* Note that the UTOPIA clock must be programmed as to operate */
- /* within the range SYSCLK/10 .. 50MHz. */
- /*-----------------------------------------------------------------*/
- car->car_sccr &= 0xFFFFFFE0;
- car->car_sccr |= 0x00000008; /* UTPCLK = SYSCLK / 4 */
-
- /*-----------------------------------------------------------------*/
- /* RCCR - RISC Controller Configuration Register */
- /* */
- /* RCCR[8] DR1M IDMA Request 0 Mode */
- /* 0 = edge sensitive */
- /* 1 = level sensitive */
- /* RCCR[9] DR0M IDMA Request 0 Mode */
- /* 0 = edge sensitive */
- /* 1 = level sensitive */
- /* RCCR[10:11] DRQP IDMA Request Priority */
- /* 00 = IDMA req. have more prio. than SCCs */
- /* 01 = IDMA req. have less prio. then SCCs */
- /* 10 = IDMA requests have the lowest prio. */
- /* 11 = reserved */
- /* */
- /* The RCCR[DR0M] and RCCR[DR1M] bits must be set to enable UTOPIA */
- /* operation. Also, program RCCR[DPQP] to 01 to give SCC transfers */
- /* higher priority. */
- /*-----------------------------------------------------------------*/
- cpm->cp_rccr &= 0xFF0F;
- cpm->cp_rccr |= 0x00D0;
-
- /*-----------------------------------------------------------------*/
- /* Port B - TxClav Signal */
- /*-----------------------------------------------------------------*/
- cpm->cp_pbpar |= 0x00010000; /* PBPAR[15] = 1 */
- cpm->cp_pbdir &= 0xFFFEFFFF; /* PBDIR[15] = 0 */
-
- /*-----------------------------------------------------------------*/
- /* UTOPIA Mode Register */
- /* */
- /* - muxed bus (master operation only) */
- /* - multi PHY (because of a bug in the MPC860P rev.E.0) */
- /* - internal clock */
- /* - no loopback */
- /* - do no activate statistical counters */
- /*-----------------------------------------------------------------*/
- iop->utmode = 0x00000004; SYNC;
-
- /*-----------------------------------------------------------------*/
- /* Port D - UTOPIA Data and Control Signals */
- /* */
- /* 15-12 UTPB[0:3] UTOPIA bus bit 0 - 3 input/output signals */
- /* 11 RXENB UTOPIA receive enable input/output signal */
- /* 10 TXENB UTOPIA transmit enable input/output signal */
- /* 9 TUPCLK UTOPIA clock input/output signal */
- /* 8 MII-MDC Used by MII in simult. MII and UTOPIA operation */
- /* 7-4 UTPB[4:7] UTOPIA bus bit 4 - 7 input/output signals */
- /* 3 SOC UTOPIA Start of cell input/output signal */
- /* 2 Reserved */
- /* 1 Enable UTOPIA mode */
- /* 0 Enable SAR */
- /*-----------------------------------------------------------------*/
- iop->iop_pdpar |= 0xDF7F; SYNC;
- iop->iop_pddir &= 0x2080; SYNC;
-
- /*-----------------------------------------------------------------*/
- /* Port C - RxClav Signal */
- /*-----------------------------------------------------------------*/
- iop->iop_pcpar |= 0x0001; /* PCPAR[15] = 1 */
- iop->iop_pcdir &= 0xFFFE; /* PCDIR[15] = 0 */
- iop->iop_pcso &= 0xFFFE; /* PCSO[15] = 0 */
-
- if (flag)
- enable_interrupts();
-}
diff --git a/board/siemens/IAD210/atm.h b/board/siemens/IAD210/atm.h
deleted file mode 100644
index cd5b45e..0000000
--- a/board/siemens/IAD210/atm.h
+++ /dev/null
@@ -1,287 +0,0 @@
-typedef unsigned char uint8;
-typedef unsigned short uint16;
-typedef unsigned int uint32;
-typedef volatile unsigned char vuint8;
-typedef volatile unsigned short vuint16;
-typedef volatile unsigned int vuint32;
-
-
-#define DPRAM_ATM CONFIG_SYS_IMMR + 0x3000
-
-#define ATM_DPRAM_BEGIN (DPRAM_ATM - CONFIG_SYS_IMMR - 0x2000)
-#define NUM_CONNECTIONS 1
-#define SAR_RXB_SIZE 1584
-#define AM_HMASK 0x0FFFFFF0
-
-#define NUM_CT_ENTRIES (NUM_CONNECTIONS)
-#define NUM_TCTE_ENTRIES (NUM_CONNECTIONS)
-#define NUM_AM_ENTRIES (NUM_CONNECTIONS+1)
-#define NUM_AP_ENTRIES (NUM_CONNECTIONS+1)
-#define NUM_MPHYPT_ENTRIES 1
-#define NUM_APCP_ENTRIES 1
-#define NUM_APCT_PRIO_1_ENTRIES 146 /* Determines minimum rate */
-#define NUM_TQ_ENTRIES 12
-
-#define SIZE_OF_CT_ENTRY 64
-#define SIZE_OF_TCTE_ENTRY 32
-#define SIZE_OF_AM_ENTRY 4
-#define SIZE_OF_AP_ENTRY 2
-#define SIZE_OF_MPHYPT_ENTRY 2
-#define SIZE_OF_APCP_ENTRY 32
-#define SIZE_OF_APCT_ENTRY 2
-#define SIZE_OF_TQ_ENTRY 2
-
-#define CT_BASE ((ATM_DPRAM_BEGIN + 63) & 0xFFC0) /*64 */
-#define TCTE_BASE (CT_BASE + NUM_CT_ENTRIES * SIZE_OF_CT_ENTRY) /*32 */
-#define APCP_BASE (TCTE_BASE + NUM_TCTE_ENTRIES * SIZE_OF_TCTE_ENTRY) /*32 */
-#define AM_BEGIN (APCP_BASE + NUM_APCP_ENTRIES * SIZE_OF_APCP_ENTRY) /*4 */
-#define AM_BASE (AM_BEGIN + (NUM_AM_ENTRIES - 1) * SIZE_OF_AM_ENTRY)
-#define AP_BEGIN (AM_BEGIN + NUM_AM_ENTRIES * SIZE_OF_AM_ENTRY) /*2 */
-#define AP_BASE (AP_BEGIN + (NUM_AP_ENTRIES - 1) * SIZE_OF_AP_ENTRY)
-#define MPHYPT_BASE (AP_BEGIN + NUM_AP_ENTRIES * SIZE_OF_AP_ENTRY) /*2 */
-#define APCT_PRIO_1_BASE (MPHYPT_BASE + NUM_MPHYPT_ENTRIES * SIZE_OF_MPHYPT_ENTRY) /*2 */
-#define TQ_BASE (APCT_PRIO_1_BASE + NUM_APCT_PRIO_1_ENTRIES * SIZE_OF_APCT_ENTRY) /*2 */
-#define ATM_DPRAM_SIZE ((TQ_BASE + NUM_TQ_ENTRIES * SIZE_OF_TQ_ENTRY) - ATM_DPRAM_BEGIN)
-
-#define CT_PTR(base) ((struct ct_entry_t *)((char *)(base) + 0x2000 + CT_BASE))
-#define TCTE_PTR(base) ((struct tcte_entry_t *)((char *)(base) + 0x2000 + TCTE_BASE))
-#define AM_PTR(base) ((uint32 *)((char *)(base) + 0x2000 + AM_BASE))
-#define AP_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + AP_BASE))
-#define MPHYPT_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + MPHYPT_BASE))
-#define APCP_PTR(base) ((struct apc_params_t *)((char*)(base) + 0x2000 + APCP_BASE))
-#define APCT1_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_1_BASE))
-#define APCT2_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_2_BASE))
-#define APCT3_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_3_BASE))
-#define TQ_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + TQ_BASE))
-
-/* SAR registers */
-#define RBDBASE(base) ((vuint32 *)(base + 0x3F00)) /* Base address of RxBD-List */
-#define SRFCR(base) ((vuint8 *)(base + 0x3F04)) /* DMA Receive function code */
-#define SRSTATE(base) ((vuint8 *)(base + 0x3F05)) /* DMA Receive status */
-#define MRBLR(base) ((vuint16 *)(base + 0x3F06)) /* Init to 0 for ATM */
-#define RSTATE(base) ((vuint32 *)(base + 0x3F08)) /* Do not write to */
-#define R_CNT(base) ((vuint16 *)(base + 0x3F10)) /* Do not write to */
-#define STFCR(base) ((vuint8 *)(base + 0x3F12)) /* DMA Transmit function code */
-#define STSTATE(base) ((vuint8 *)(base + 0x3F13)) /* DMA Transmit status */
-#define TBDBASE(base) ((vuint32 *)(base + 0x3F14)) /* Base address of TxBD-List */
-#define TSTATE(base) ((vuint32 *)(base + 0x3F18)) /* Do not write to */
-#define COMM_CH(base) ((vuint16 *)(base + 0x3F1C)) /* Command channel */
-#define STCHNUM(base) ((vuint16 *)(base + 0x3F1E)) /* Do not write to */
-#define T_CNT(base) ((vuint16 *)(base + 0x3F20)) /* Do not write to */
-#define CTBASE(base) ((vuint16 *)(base + 0x3F22)) /* Base address of Connection-table */
-#define ECTBASE(base) ((vuint32 *)(base + 0x3F24)) /* Valid only for external Conn.-table */
-#define INTBASE(base) ((vuint32 *)(base + 0x3F28)) /* Base address of Interrupt-table */
-#define INTPTR(base) ((vuint32 *)(base + 0x3F2C)) /* Pointer to Interrupt-queue */
-#define C_MASK(base) ((vuint32 *)(base + 0x3F30)) /* CRC-mask */
-#define SRCHNUM(base) ((vuint16 *)(base + 0x3F34)) /* Do not write to */
-#define INT_CNT(base) ((vuint16 *)(base + 0x3F36)) /* Interrupt-Counter */
-#define INT_ICNT(base) ((vuint16 *)(base + 0x3F38)) /* Interrupt threshold */
-#define TSTA(base) ((vuint16 *)(base + 0x3F3A)) /* Time-stamp-address */
-#define OLDLEN(base) ((vuint16 *)(base + 0x3F3C)) /* Do not write to */
-#define SMRBLR(base) ((vuint16 *)(base + 0x3F3E)) /* SAR max RXBuffer length */
-#define EHEAD(base) ((vuint32 *)(base + 0x3F40)) /* Valid for serial mode */
-#define EPAYLOAD(base) ((vuint32 *)(base + 0x3F44)) /* Valid for serial mode */
-#define TQBASE(base) ((vuint16 *)(base + 0x3F48)) /* Base address of Tx queue */
-#define TQEND(base) ((vuint16 *)(base + 0x3F4A)) /* End address of Tx queue */
-#define TQAPTR(base) ((vuint16 *)(base + 0x3F4C)) /* TQ APC pointer */
-#define TQTPTR(base) ((vuint16 *)(base + 0x3F4E)) /* TQ Tx pointer */
-#define APCST(base) ((vuint16 *)(base + 0x3F50)) /* APC status */
-#define APCPTR(base) ((vuint16 *)(base + 0x3F52)) /* APC parameter pointer */
-#define HMASK(base) ((vuint32 *)(base + 0x3F54)) /* Header mask */
-#define AMBASE(base) ((vuint16 *)(base + 0x3F58)) /* Address match table base */
-#define AMEND(base) ((vuint16 *)(base + 0x3F5A)) /* Address match table end */
-#define APBASE(base) ((vuint16 *)(base + 0x3F5C)) /* Address match parameter */
-#define FLBASE(base) ((vuint32 *)(base + 0x3F54)) /* First-level table base */
-#define SLBASE(base) ((vuint32 *)(base + 0x3F58)) /* Second-level table base */
-#define FLMASK(base) ((vuint16 *)(base + 0x3F5C)) /* First-level mask */
-#define ECSIZE(base) ((vuint16 *)(base + 0x3F5E)) /* Valid for extended mode */
-#define APCT_REAL(base) ((vuint32 *)(base + 0x3F60)) /* APC 32 bit counter */
-#define R_PTR(base) ((vuint32 *)(base + 0x3F64)) /* Do not write to */
-#define RTEMP(base) ((vuint32 *)(base + 0x3F68)) /* Do not write to */
-#define T_PTR(base) ((vuint32 *)(base + 0x3F6C)) /* Do not write to */
-#define TTEMP(base) ((vuint32 *)(base + 0x3F70)) /* Do not write to */
-
-/* ESAR registers */
-#define FMCTIMESTMP(base) ((vuint32 *)(base + 0x3F80)) /* Perf.Mon.Timestamp */
-#define FMCTEMPLATE(base) ((vuint32 *)(base + 0x3F84)) /* Perf.Mon.Template */
-#define PMPTR(base) ((vuint16 *)(base + 0x3F88)) /* Perf.Mon.Table */
-#define PMCHANNEL(base) ((vuint16 *)(base + 0x3F8A)) /* Perf.Mon.Channel */
-#define MPHYST(base) ((vuint16 *)(base + 0x3F90)) /* Multi-PHY Status */
-#define TCTEBASE(base) ((vuint16 *)(base + 0x3F92)) /* Internal TCT Extension Base */
-#define ETCTEBASE(base) ((vuint32 *)(base + 0x3F94)) /* External TCT Extension Base */
-#define COMM_CH2(base) ((vuint32 *)(base + 0x3F98)) /* 2nd command channel word */
-#define STATBASE(base) ((vuint16 *)(base + 0x3F9C)) /* Statistics table pointer */
-
-/* UTOPIA Mode Register */
-#define UTMODE(base) (CAST(vuint32 *)(base + 0x0978))
-
-/* SAR commands */
-#define TRANSMIT_CHANNEL_ACTIVATE_CMD 0x0FC1
-#define TRANSMIT_CHANNEL_DEACTIVATE_CMD 0x1FC1
-#define STOP_TRANSMIT_CMD 0x2FC1
-#define RESTART_TRANSMIT_CMD 0x3FC1
-#define STOP_RECEIVE_CMD 0x4FC1
-#define RESTART_RECEIVE_CMD 0x5FC1
-#define APC_BYPASS_CMD 0x6FC1
-#define MEM_WRITE_CMD 0x7FC1
-#define CPCR_FLG 0x0001
-
-/* INT flags */
-#define INT_VALID 0x80000000
-#define INT_WRAP 0x40000000
-#define INT_APCO 0x00800000
-#define INT_TQF 0x00200000
-#define INT_RXF 0x00080000
-#define INT_BSY 0x00040000
-#define INT_TXB 0x00020000
-#define INT_RXB 0x00010000
-
-#define NUM_INT_ENTRIES 80
-#define SIZE_OF_INT_ENTRY 4
-
-struct apc_params_t {
- vuint16 apct_base1; /* APC Table - First Priority Base pointer */
- vuint16 apct_end1; /* First APC Table - Length */
- vuint16 apct_ptr1; /* First APC Table Pointer */
- vuint16 apct_sptr1; /* APC Table First Priority Service pointer */
- vuint16 etqbase; /* Enhanced Transmit Queue Base pointer */
- vuint16 etqend; /* Enhanced Transmit Queue End pointer */
- vuint16 etqaptr; /* Enhanced Transmit Queue APC pointer */
- vuint16 etqtptr; /* Enhanced Transmit Queue Transmitter pointer */
- vuint16 apc_mi; /* APC - Max Iteration */
- vuint16 ncits; /* Number of Cells In TimeSlot */
- vuint16 apcnt; /* APC - N Timer */
- vuint16 reserved1; /* reserved */
- vuint16 eapcst; /* APC status */
- vuint16 ptp_counter; /* PTP queue length */
- vuint16 ptp_txch; /* PTP channel */
- vuint16 reserved2; /* reserved */
-};
-
-struct ct_entry_t {
- /* RCT */
- unsigned fhnt:1;
- unsigned pm_rct:1;
- unsigned reserved0:6;
- unsigned hec:1;
- unsigned clp:1;
- unsigned cng_ncrc:1;
- unsigned inf_rct:1;
- unsigned cngi_ptp:1;
- unsigned cdis_rct:1;
- unsigned aal_rct:2;
- uint16 rbalen;
- uint32 rcrc;
- uint32 rb_ptr;
- uint16 rtmlen;
- uint16 rbd_ptr;
- uint16 rbase;
- uint16 tstamp;
- uint16 imask;
- unsigned ft:2;
- unsigned nim:1;
- unsigned reserved1:2;
- unsigned rpmt:6;
- unsigned reserved2:5;
- uint8 reserved3[8];
- /* TCT */
- unsigned reserved4:1;
- unsigned pm_tct:1;
- unsigned reserved5:6;
- unsigned pc:1;
- unsigned reserved6:2;
- unsigned inf_tct:1;
- unsigned cr10:1;
- unsigned cdis_tct:1;
- unsigned aal_tct:2;
- uint16 tbalen;
- uint32 tcrc;
- uint32 tb_ptr;
- uint16 ttmlen;
- uint16 tbd_ptr;
- uint16 tbase;
- unsigned reserved7:5;
- unsigned tpmt:6;
- unsigned reserved8:3;
- unsigned avcf:1;
- unsigned act:1;
- uint32 chead;
- uint16 apcl;
- uint16 apcpr;
- unsigned out:1;
- unsigned bnr:1;
- unsigned tservice:2;
- unsigned apcp:12;
- uint16 apcpf;
-};
-
-struct tcte_entry_t {
- unsigned res1:4;
- unsigned scr:12;
- uint16 scrf;
- uint16 bt;
- uint16 buptrh;
- uint32 buptrl;
- unsigned vbr2:1;
- unsigned res2:15;
- uint16 oobr;
- uint16 res3[8];
-};
-
-#define SIZE_OF_RBD 12
-#define SIZE_OF_TBD 12
-
-struct atm_bd_t {
- vuint16 flags;
- vuint16 length;
- unsigned char *buffer_ptr;
- vuint16 cpcs_uu_cpi;
- vuint16 reserved;
-};
-
-/* BD flags */
-#define EMPTY 0x8000
-#define READY 0x8000
-#define WRAP 0x2000
-#define INTERRUPT 0x1000
-#define LAST 0x0800
-#define FIRST 0x0400
-#define OAM 0x0400
-#define CONTINUOUS 0x0200
-#define HEC_ERROR 0x0080
-#define CELL_LOSS 0x0040
-#define CONGESTION 0x0020
-#define ABORT 0x0010
-#define LEN_ERROR 0x0002
-#define CRC_ERROR 0x0001
-
-struct atm_connection_t {
- struct atm_bd_t *rbd_ptr;
- int num_rbd;
- struct atm_bd_t *tbd_ptr;
- int num_tbd;
- struct ct_entry_t *ct_ptr;
- struct tcte_entry_t *tcte_ptr;
- void *drv;
- void (*notify) (void *drv, int event);
-};
-
-struct atm_driver_t {
- int loaded;
- int started;
- char *csram;
- int csram_size;
- uint32 *am_top;
- uint16 *ap_top;
- uint32 *int_reload_ptr;
- uint32 *int_serv_ptr;
- struct atm_bd_t *rbd_base_ptr;
- struct atm_bd_t *tbd_base_ptr;
- unsigned linerate_in_bps;
-};
-
-extern struct atm_connection_t g_conn[NUM_CONNECTIONS];
-extern struct atm_driver_t g_atm;
-
-extern int atmLoad (void);
-extern void atmUnload (void);
diff --git a/board/siemens/IAD210/flash.c b/board/siemens/IAD210/flash.c
deleted file mode 100644
index c262e0f..0000000
--- a/board/siemens/IAD210/flash.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size, size<<20);
- }
-
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
- /* Re-do sizing to get full correct info */
- size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_info[0].size = size;
-
- return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- ulong value;
- ulong base = (ulong)addr;
-
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00900090;
-
- value = addr[0];
-
- switch (value) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- value = addr[1]; /* device ID */
-
- switch (value) {
- case AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#if 0 /* enable when device IDs are available */
- case AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr = (volatile unsigned long *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr = (volatile unsigned long *)info->start[0];
-
- *addr = 0x00F000F0; /* reset bank */
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_long*)(info->start[sect]);
- addr[0] = 0x00300030;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_long*)(info->start[l_sect]);
- while ((addr[0] & 0x00800080) != 0x00800080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
- DONE:
- /* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
- addr[0] = 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00A000A0;
-
- *((vu_long *)dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/siemens/IAD210/u-boot.lds b/board/siemens/IAD210/u-boot.lds
deleted file mode 100644
index c0f1073..0000000
--- a/board/siemens/IAD210/u-boot.lds
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
- net/libnet.o (.text*)
- drivers/rtc/librtc.o (.text*)
-
- . = env_offset;
- common/env_embedded.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- #include <u-boot.lst>
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
diff --git a/board/siemens/SCM/Makefile b/board/siemens/SCM/Makefile
deleted file mode 100644
index 07db9d4..0000000
--- a/board/siemens/SCM/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common $(obj)../../tqc/tqm8xx)
-endif
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS = scm.o flash.o fpga_scm.o ../common/fpga.o \
- ../../tqc/tqm8xx/load_sernum_ethaddr.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/siemens/SCM/flash.c b/board/siemens/SCM/flash.c
deleted file mode 100644
index 4a6d538..0000000
--- a/board/siemens/SCM/flash.c
+++ /dev/null
@@ -1,488 +0,0 @@
-/*
- * (C) Copyright 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Flash Routines for AMD devices on the TQM8260 board
- *
- *--------------------------------------------------------------------
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#define V_ULONG(a) (*(volatile unsigned long *)( a ))
-#define V_BYTE(a) (*(volatile unsigned char *)( a ))
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-/*-----------------------------------------------------------------------
- */
-void flash_reset (void)
-{
- if (flash_info[0].flash_id != FLASH_UNKNOWN) {
- V_ULONG (flash_info[0].start[0]) = 0x00F000F0;
- V_ULONG (flash_info[0].start[0] + 4) = 0x00F000F0;
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-ulong flash_get_size (ulong baseaddr, flash_info_t * info)
-{
- short i;
- unsigned long flashtest_h, flashtest_l;
-
- /* Write auto select command sequence and test FLASH answer */
- V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (baseaddr + ((ulong) 0x02AA << 3)) = 0x00550055;
- V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00900090;
- V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (baseaddr + 4 + ((ulong) 0x02AA << 3)) = 0x00550055;
- V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00900090;
-
- flashtest_h = V_ULONG (baseaddr); /* manufacturer ID */
- flashtest_l = V_ULONG (baseaddr + 4);
-
- switch ((int) flashtest_h) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- flashtest_h = V_ULONG (baseaddr + 8); /* device ID */
- flashtest_l = V_ULONG (baseaddr + 12);
- if (flashtest_h != flashtest_l) {
- info->flash_id = FLASH_UNKNOWN;
- } else {
- switch (flashtest_h) {
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00400000;
- break; /* 4 * 1 MB = 4 MB */
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00400000;
- break; /* 4 * 1 MB = 4 MB */
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00800000;
- break; /* 4 * 2 MB = 8 MB */
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00800000;
- break; /* 4 * 2 MB = 8 MB */
- case AMD_ID_DL322T:
- info->flash_id += FLASH_AMDL322T;
- info->sector_count = 71;
- info->size = 0x01000000;
- break; /* 4 * 4 MB = 16 MB */
- case AMD_ID_DL322B:
- info->flash_id += FLASH_AMDL322B;
- info->sector_count = 71;
- info->size = 0x01000000;
- break; /* 4 * 4 MB = 16 MB */
- case AMD_ID_DL323T:
- info->flash_id += FLASH_AMDL323T;
- info->sector_count = 71;
- info->size = 0x01000000;
- break; /* 4 * 4 MB = 16 MB */
- case AMD_ID_DL323B:
- info->flash_id += FLASH_AMDL323B;
- info->sector_count = 71;
- info->size = 0x01000000;
- break; /* 4 * 4 MB = 16 MB */
- case AMD_ID_LV640U:
- info->flash_id += FLASH_AM640U;
- info->sector_count = 128;
- info->size = 0x02000000;
- break; /* 4 * 8 MB = 32 MB */
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* no or unknown flash */
- }
- }
-
- if (flashtest_h == AMD_ID_LV640U) {
-
- /* set up sector start adress table (uniform sector type) */
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = baseaddr + (i * 0x00040000);
-
- } else if (info->flash_id & FLASH_BTYPE) {
-
- /* set up sector start adress table (bottom sector type) */
- info->start[0] = baseaddr + 0x00000000;
- info->start[1] = baseaddr + 0x00010000;
- info->start[2] = baseaddr + 0x00018000;
- info->start[3] = baseaddr + 0x00020000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = baseaddr + (i * 0x00040000) - 0x000C0000;
- }
-
- } else {
-
- /* set up sector start adress table (top sector type) */
- i = info->sector_count - 1;
- info->start[i--] = baseaddr + info->size - 0x00010000;
- info->start[i--] = baseaddr + info->size - 0x00018000;
- info->start[i--] = baseaddr + info->size - 0x00020000;
- for (; i >= 0; i--) {
- info->start[i] = baseaddr + i * 0x00040000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- if ((V_ULONG (info->start[i] + 16) & 0x00010001) ||
- (V_ULONG (info->start[i] + 20) & 0x00010001)) {
- info->protect[i] = 1; /* D0 = 1 if protected */
- } else {
- info->protect[i] = 0;
- }
- }
-
- flash_reset ();
- return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-unsigned long flash_init (void)
-{
- unsigned long size_b0 = 0;
- int i;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here (only one bank) */
-
- size_b0 = flash_get_size (CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
- if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0 >> 20);
- }
-
- /*
- * protect monitor and environment sectors
- */
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-#endif
-
- return (size_b0);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf ("AMD ");
- break;
- case FLASH_MAN_FUJ:
- printf ("FUJITSU ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM800T:
- printf ("29LV800T (8 M, top sector)\n");
- break;
- case FLASH_AM800B:
- printf ("29LV800T (8 M, bottom sector)\n");
- break;
- case FLASH_AM160T:
- printf ("29LV160T (16 M, top sector)\n");
- break;
- case FLASH_AM160B:
- printf ("29LV160B (16 M, bottom sector)\n");
- break;
- case FLASH_AMDL322T:
- printf ("29DL322T (32 M, top sector)\n");
- break;
- case FLASH_AMDL322B:
- printf ("29DL322B (32 M, bottom sector)\n");
- break;
- case FLASH_AMDL323T:
- printf ("29DL323T (32 M, top sector)\n");
- break;
- case FLASH_AMDL323B:
- printf ("29DL323B (32 M, bottom sector)\n");
- break;
- case FLASH_AM640U:
- printf ("29LV640D (64 M, uniform sector)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect])
- prot++;
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
- V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00800080;
- V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
- V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
- V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00800080;
- V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
- udelay (1000);
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- V_ULONG (info->start[sect]) = 0x00300030;
- V_ULONG (info->start[sect] + 4) = 0x00300030;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- while ((V_ULONG (info->start[l_sect]) & 0x00800080) != 0x00800080 ||
- (V_ULONG (info->start[l_sect] + 4) & 0x00800080) != 0x00800080)
- {
- if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
- }
- }
-
- DONE:
- /* reset to read mode */
- flash_reset ();
-
- printf (" done\n");
- return 0;
-}
-
-static int write_dword (flash_info_t *, ulong, unsigned char *);
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong dp;
- static unsigned char bb[8];
- int i, l, rc, cc = cnt;
-
- dp = (addr & ~7); /* get lower dword aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - dp) != 0) {
- for (i = 0; i < 8; i++)
- bb[i] = (i < l || (i - l) >= cc) ? V_BYTE (dp + i) : *src++;
- if ((rc = write_dword (info, dp, bb)) != 0) {
- return (rc);
- }
- dp += 8;
- cc -= 8 - l;
- }
-
- /*
- * handle word aligned part
- */
- while (cc >= 8) {
- if ((rc = write_dword (info, dp, src)) != 0) {
- return (rc);
- }
- dp += 8;
- src += 8;
- cc -= 8;
- }
-
- if (cc <= 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- for (i = 0; i < 8; i++) {
- bb[i] = (i < cc) ? *src++ : V_BYTE (dp + i);
- }
- return (write_dword (info, dp, bb));
-}
-
-/*-----------------------------------------------------------------------
- * Write a dword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
-{
- ulong start, cl, ch;
- int flag, i;
-
- for (ch = 0, i = 0; i < 4; i++)
- ch = (ch << 8) + *pdata++; /* high word */
- for (cl = 0, i = 0; i < 4; i++)
- cl = (cl << 8) + *pdata++; /* low word */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *) dest) & ch) != ch
- || (*((vu_long *) (dest + 4)) & cl) != cl) {
- return (2);
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
- V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00A000A0;
- V_ULONG (dest) = ch;
- V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
- V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00A000A0;
- V_ULONG (dest + 4) = cl;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while (((V_ULONG (dest) & 0x00800080) != (ch & 0x00800080)) ||
- ((V_ULONG (dest + 4) & 0x00800080) != (cl & 0x00800080))) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
diff --git a/board/siemens/SCM/fpga_scm.c b/board/siemens/SCM/fpga_scm.c
deleted file mode 100644
index acd9c15..0000000
--- a/board/siemens/SCM/fpga_scm.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <mpc8260.h>
-#include <common.h>
-#include "../common/fpga.h"
-
-fpga_t fpga_list[] = {
- {"FIOX", CONFIG_SYS_FIOX_BASE,
- CONFIG_SYS_PD_FIOX_INIT, CONFIG_SYS_PD_FIOX_PROG, CONFIG_SYS_PD_FIOX_DONE}
- ,
- {"FDOHM", CONFIG_SYS_FDOHM_BASE,
- CONFIG_SYS_PD_FDOHM_INIT, CONFIG_SYS_PD_FDOHM_PROG, CONFIG_SYS_PD_FDOHM_DONE}
-};
-int fpga_count = sizeof (fpga_list) / sizeof (fpga_t);
-
-
-ulong fpga_control (fpga_t * fpga, int cmd)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- switch (cmd) {
- case FPGA_INIT_IS_HIGH:
- immr->im_ioport.iop_pdird &= ~fpga->init_mask; /* input */
- return (immr->im_ioport.iop_pdatd & fpga->init_mask) ? 1 : 0;
-
- case FPGA_INIT_SET_LOW:
- immr->im_ioport.iop_pdird |= fpga->init_mask; /* output */
- immr->im_ioport.iop_pdatd &= ~fpga->init_mask;
- break;
-
- case FPGA_INIT_SET_HIGH:
- immr->im_ioport.iop_pdird |= fpga->init_mask; /* output */
- immr->im_ioport.iop_pdatd |= fpga->init_mask;
- break;
-
- case FPGA_PROG_SET_LOW:
- immr->im_ioport.iop_pdatd &= ~fpga->prog_mask;
- break;
-
- case FPGA_PROG_SET_HIGH:
- immr->im_ioport.iop_pdatd |= fpga->prog_mask;
- break;
-
- case FPGA_DONE_IS_HIGH:
- return (immr->im_ioport.iop_pdatd & fpga->done_mask) ? 1 : 0;
-
- case FPGA_READ_MODE:
- break;
-
- case FPGA_LOAD_MODE:
- break;
-
- case FPGA_GET_ID:
- if (fpga->conf_base == CONFIG_SYS_FIOX_BASE) {
- ulong ver =
- *(volatile ulong *) (fpga->conf_base + 0x10);
- return ((ver >> 10) & 0xf) + ((ver >> 2) & 0xf0);
- } else if (fpga->conf_base == CONFIG_SYS_FDOHM_BASE) {
- return (*(volatile ushort *) fpga->conf_base) & 0xff;
- } else {
- return *(volatile ulong *) fpga->conf_base;
- }
-
- case FPGA_INIT_PORTS:
- immr->im_ioport.iop_ppard &= ~fpga->init_mask; /* INIT I/O */
- immr->im_ioport.iop_psord &= ~fpga->init_mask;
- immr->im_ioport.iop_pdird &= ~fpga->init_mask;
-
- immr->im_ioport.iop_ppard &= ~fpga->prog_mask; /* PROG Output */
- immr->im_ioport.iop_psord &= ~fpga->prog_mask;
- immr->im_ioport.iop_pdird |= fpga->prog_mask;
-
- immr->im_ioport.iop_ppard &= ~fpga->done_mask; /* DONE Input */
- immr->im_ioport.iop_psord &= ~fpga->done_mask;
- immr->im_ioport.iop_pdird &= ~fpga->done_mask;
-
- break;
-
- }
- return 0;
-}
diff --git a/board/siemens/SCM/scm.c b/board/siemens/SCM/scm.c
deleted file mode 100644
index 461b56e..0000000
--- a/board/siemens/SCM/scm.c
+++ /dev/null
@@ -1,541 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-#include <linux/compiler.h>
-
-#include "scm.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void config_scoh_cs(void);
-extern int fpga_init(void);
-
-#if 0
-#define DEBUGF(fmt,args...) printf (fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
- /* Port A configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */
- /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */
- /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */
- /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */
- /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */
- /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */
- /* PA25 */ { 0, 0, 0, 1, 0, 0 },
- /* PA24 */ { 0, 0, 0, 1, 0, 0 },
- /* PA23 */ { 0, 0, 0, 1, 0, 0 },
- /* PA22 */ { 0, 0, 0, 1, 0, 0 },
- /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */
- /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */
- /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */
- /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */
- /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */
- /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1]*/
- /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */
- /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */
- /* PA13 */ { 0, 0, 0, 1, 0, 0 },
- /* PA12 */ { 0, 0, 0, 1, 0, 0 },
- /* PA11 */ { 0, 0, 0, 1, 0, 0 },
- /* PA10 */ { 0, 0, 0, 1, 0, 0 },
- /* PA9 */ { 1, 1, 1, 1, 0, 0 }, /* TDM_A1 L1TXD0 */
- /* PA8 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1RXD0 */
- /* PA7 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1TSYNC */
- /* PA6 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1RSYNC */
- /* PA5 */ { 1, 0, 0, 0, 0, 0 }, /* FIOX_FPGA_PR */
- /* PA4 */ { 1, 0, 0, 0, 0, 0 }, /* DOHM_FPGA_PR */
- /* PA3 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK4 */
- /* PA2 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK4 */
- /* PA1 */ { 0, 0, 0, 1, 0, 0 },
- /* PA0 */ { 1, 0, 0, 0, 0, 0 } /* BUSY */
- },
-
- /* Port B configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PB31 */ { 1, 0, 0, 1, 0, 0 }, /* EQ_ALARM_MIN */
- /* PB30 */ { 1, 0, 0, 1, 0, 0 }, /* EQ_ALARM_MAJ */
- /* PB29 */ { 1, 0, 0, 1, 0, 0 }, /* COM_ALARM_MIN */
- /* PB28 */ { 1, 0, 0, 1, 0, 0 }, /* COM_ALARM_MAJ */
- /* PB27 */ { 0, 1, 0, 0, 0, 0 },
- /* PB26 */ { 0, 1, 0, 0, 0, 0 },
- /* PB25 */ { 1, 0, 0, 1, 0, 0 }, /* LED_GREEN_L */
- /* PB24 */ { 1, 0, 0, 1, 0, 0 }, /* LED_RED_L */
- /* PB23 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1TXD */
- /* PB22 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1RXD */
- /* PB21 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1TSYNC */
- /* PB20 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1RSYNC */
- /* PB19 */ { 1, 0, 0, 0, 0, 0 }, /* UID */
- /* PB18 */ { 0, 1, 0, 0, 0, 0 },
- /* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_DV */
- /* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_ER */
- /* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_ER */
- /* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_EN */
- /* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII COL */
- /* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII CRS */
- /* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[3] */
- /* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[2] */
- /* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[1] */
- /* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[0] */
- /* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[3] */
- /* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[2] */
- /* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[1] */
- /* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[0] */
- /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- },
-
- /* Port C configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PC31 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK1 */
- /* PC30 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK1 */
- /* PC29 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK3 */
- /* PC28 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK3 */
- /* PC27 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK2 */
- /* PC26 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK2 */
- /* PC25 */ { 0, 0, 0, 1, 0, 0 },
- /* PC24 */ { 0, 0, 0, 1, 0, 0 },
- /* PC23 */ { 0, 1, 0, 1, 0, 0 },
- /* PC22 */ { 0, 1, 0, 0, 0, 0 },
- /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */
- /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */
- /* PC19 */ { 0, 1, 0, 0, 0, 0 },
- /* PC18 */ { 0, 1, 0, 0, 0, 0 },
- /* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_CLK */
- /* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII TX_CLK */
- /* PC15 */ { 0, 0, 0, 1, 0, 0 },
- /* PC14 */ { 0, 1, 0, 0, 0, 0 },
- /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* RES_PHY_L */
- /* PC12 */ { 0, 0, 0, 1, 0, 0 },
- /* PC11 */ { 0, 0, 0, 1, 0, 0 },
- /* PC10 */ { 0, 0, 0, 1, 0, 0 },
- /* PC9 */ { 0, 1, 1, 0, 0, 0 }, /* TDM_A2 L1TSYNC */
- /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* FEP_RDY */
- /* PC7 */ { 0, 0, 0, 0, 0, 0 },
- /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* UC4_ALARM_L */
- /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* UC3_ALARM_L */
- /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* UC2_ALARM_L */
- /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* RES_MISC_L */
- /* PC2 */ { 0, 0, 0, 1, 0, 0 }, /* RES_OH_L */
- /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* RES_DOHM_L */
- /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* RES_FIOX_L */
- },
-
- /* Port D configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
- /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
- /* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* INIT_F */
- /* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* DONE_F */
- /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* INIT_D */
- /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* DONE_D */
- /* PD25 */ { 0, 0, 0, 1, 0, 0 },
- /* PD24 */ { 0, 0, 0, 1, 0, 0 },
- /* PD23 */ { 0, 0, 0, 1, 0, 0 },
- /* PD22 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1TXD */
- /* PD21 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1RXD */
- /* PD20 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1RSYNC */
- /* PD19 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPISEL */
- /* PD18 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPICLK */
- /* PD17 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPIMOSI */
- /* PD16 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPIMOSO */
-#if defined(CONFIG_SOFT_I2C)
- /* PD15 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SDA */
- /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SCL */
-#else
-#if defined(CONFIG_HARD_I2C)
- /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
- /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
-#else /* normal I/O port pins */
- /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */
- /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SCL */
-#endif
-#endif
- /* PD13 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1TXD */
- /* PD12 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1RXD */
- /* PD11 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1TSYNC */
- /* PD10 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1RSYNC */
- /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
- /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
- /* PD7 */ { 0, 0, 0, 1, 0, 1 },
- /* PD6 */ { 0, 0, 0, 1, 0, 1 },
- /* PD5 */ { 0, 0, 0, 1, 0, 0 }, /* PROG_F */
- /* PD4 */ { 0, 0, 0, 1, 0, 0 }, /* PROG_D */
- /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- }
-};
-
-/* ------------------------------------------------------------------------- */
-
-/* Check Board Identity:
- */
-int checkboard (void)
-{
- char str[64];
- int i = getenv_f("serial#", str, sizeof (str));
-
- puts ("Board: ");
-
- if (!i || strncmp (str, "TQM8260", 7)) {
- puts ("### No HW ID - assuming TQM8260\n");
- return (0);
- }
-
- puts (str);
- putc ('\n');
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
- ulong orx, volatile uchar * base)
-{
- volatile uchar c = 0xff;
- volatile uint *sdmr_ptr;
- volatile uint *orx_ptr;
- ulong maxsize, size;
- int i;
-
- /* We must be able to test a location outsize the maximum legal size
- * to find out THAT we are outside; but this address still has to be
- * mapped by the controller. That means, that the initial mapping has
- * to be (at least) twice as large as the maximum expected size.
- */
- maxsize = (1 + (~orx | 0x7fff)) / 2;
-
- /* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
- * we are configuring CS1 if base != 0
- */
- sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
- orx_ptr = base ? &memctl->memc_or2 : &memctl->memc_or1;
-
- *orx_ptr = orx;
-
- /*
- * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
- *
- * "At system reset, initialization software must set up the
- * programmable parameters in the memory controller banks registers
- * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
- * system software should execute the following initialization sequence
- * for each SDRAM device.
- *
- * 1. Issue a PRECHARGE-ALL-BANKS command
- * 2. Issue eight CBR REFRESH commands
- * 3. Issue a MODE-SET command to initialize the mode register
- *
- * The initial commands are executed by setting P/LSDMR[OP] and
- * accessing the SDRAM with a single-byte transaction."
- *
- * The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
- */
-
- *sdmr_ptr = sdmr | PSDMR_OP_PREA;
- *base = c;
-
- *sdmr_ptr = sdmr | PSDMR_OP_CBRR;
- for (i = 0; i < 8; i++)
- *base = c;
-
- *sdmr_ptr = sdmr | PSDMR_OP_MRW;
- *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
-
- *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
- *base = c;
-
- size = get_ram_size((long *)base, maxsize);
-
- *orx_ptr = orx | ~(size - 1);
-
- return (size);
-}
-
-/*
- * Test Power-On-Reset.
- */
-int power_on_reset (void)
-{
- /* Test Reset Status Register */
- return gd->reset_status & RSR_CSRS ? 0 : 1;
-}
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
-
-#ifndef CONFIG_SYS_RAMBOOT
- long size8, size9;
-#endif
- long psize, lsize;
-
- psize = 16 * 1024 * 1024;
- lsize = 0;
-
- memctl->memc_psrt = CONFIG_SYS_PSRT;
- memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-#if 0 /* Just for debugging */
-#define prt_br_or(brX,orX) do { \
- ulong start = memctl->memc_ ## brX & 0xFFFF8000; \
- ulong sizem = ~memctl->memc_ ## orX | 0x00007FFF; \
- printf ("\n" \
- #brX " 0x%08x " #orX " 0x%08x " \
- "==> 0x%08lx ... 0x%08lx = %ld MB\n", \
- memctl->memc_ ## brX, memctl->memc_ ## orX, \
- start, start+sizem, (sizem+1)>>20); \
- } while (0)
- prt_br_or (br0, or0);
- prt_br_or (br1, or1);
- prt_br_or (br2, or2);
- prt_br_or (br3, or3);
-#endif
-
-#ifndef CONFIG_SYS_RAMBOOT
- /* 60x SDRAM setup:
- */
- size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
- (uchar *) CONFIG_SYS_SDRAM_BASE);
- size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL,
- (uchar *) CONFIG_SYS_SDRAM_BASE);
-
- if (size8 < size9) {
- psize = size9;
- printf ("(60x:9COL - %ld MB, ", psize >> 20);
- } else {
- psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
- (uchar *) CONFIG_SYS_SDRAM_BASE);
- printf ("(60x:8COL - %ld MB, ", psize >> 20);
- }
-
- /* Local SDRAM setup:
- */
-#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
- memctl->memc_lsrt = CONFIG_SYS_LSRT;
- size8 = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
- (uchar *) SDRAM_BASE2_PRELIM);
- size9 = try_init (memctl, CONFIG_SYS_LSDMR_9COL, CONFIG_SYS_OR2_9COL,
- (uchar *) SDRAM_BASE2_PRELIM);
-
- if (size8 < size9) {
- lsize = size9;
- printf ("Local:9COL - %ld MB) using ", lsize >> 20);
- } else {
- lsize = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
- (uchar *) SDRAM_BASE2_PRELIM);
- printf ("Local:8COL - %ld MB) using ", lsize >> 20);
- }
-
-#if 0
- /* Set up BR2 so that the local SDRAM goes
- * right after the 60x SDRAM
- */
- memctl->memc_br2 = (CONFIG_SYS_BR2_PRELIM & ~BRx_BA_MSK) |
- (CONFIG_SYS_SDRAM_BASE + psize);
-#endif
-#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
-#endif /* CONFIG_SYS_RAMBOOT */
-
- icache_enable ();
-
- config_scoh_cs ();
-
- return (psize);
-}
-
-/* ------------------------------------------------------------------------- */
-
-static void config_scoh_cs (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immr->im_memctl;
- volatile can_reg_t *can = (volatile can_reg_t *) CONFIG_SYS_CAN0_BASE;
- __maybe_unused volatile uint tmp, i;
-
- /* Initialize OR3 / BR3 for CAN Bus Controller 0 */
- memctl->memc_or3 = CONFIG_SYS_CAN0_OR3;
- memctl->memc_br3 = CONFIG_SYS_CAN0_BR3;
- /* Initialize OR4 / BR4 for CAN Bus Controller 1 */
- memctl->memc_or4 = CONFIG_SYS_CAN1_OR4;
- memctl->memc_br4 = CONFIG_SYS_CAN1_BR4;
-
- /* Initialize MAMR to write in the array at address 0x0 */
- memctl->memc_mamr = 0x00 | MxMR_OP_WARR | MxMR_GPL_x4DIS;
-
- /* Initialize UPMA for CAN: single read */
- memctl->memc_mdr = 0xcffeec00;
- udelay (1); /* Necessary to have the data correct in the UPM array!!!! */
- /* The read on the CAN controller write the data of mdr in UPMA array. */
- /* The index to the array will be incremented automatically
- through this read */
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x0ffcec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x0ffcec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x0ffcec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x0ffcec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x0ffcfc00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x0ffcfc00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0xfffdec07;
- udelay (1);
- tmp = can->cpu_interface;
-
-
- /* Initialize MAMR to write in the array at address 0x18 */
- memctl->memc_mamr = 0x18 | MxMR_OP_WARR | MxMR_GPL_x4DIS;
-
- /* Initialize UPMA for CAN: single write */
- memctl->memc_mdr = 0xfcffec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x00ffec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x00ffec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x00ffec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x00ffec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x00fffc00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x00fffc00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x30ffec07;
- udelay (1);
- tmp = can->cpu_interface;
-
- /* Initialize MAMR */
- memctl->memc_mamr = MxMR_GPL_x4DIS; /* GPL_B4 ouput line Disable */
-
-
- /* Initialize OR5 / BR5 for the extended EEPROM Bank0 */
- memctl->memc_or5 = CONFIG_SYS_EXTPROM_OR5;
- memctl->memc_br5 = CONFIG_SYS_EXTPROM_BR5;
- /* Initialize OR6 / BR6 for the extended EEPROM Bank1 */
- memctl->memc_or6 = CONFIG_SYS_EXTPROM_OR6;
- memctl->memc_br6 = CONFIG_SYS_EXTPROM_BR6;
-
- /* Initialize OR7 / BR7 for the Glue Logic */
- memctl->memc_or7 = CONFIG_SYS_FIOX_OR7;
- memctl->memc_br7 = CONFIG_SYS_FIOX_BR7;
-
- /* Initialize OR8 / BR8 for the DOH Logic */
- memctl->memc_or8 = CONFIG_SYS_FDOHM_OR8;
- memctl->memc_br8 = CONFIG_SYS_FDOHM_BR8;
-
- DEBUGF ("OR0 %08x BR0 %08x\n", memctl->memc_or0, memctl->memc_br0);
- DEBUGF ("OR1 %08x BR1 %08x\n", memctl->memc_or1, memctl->memc_br1);
- DEBUGF ("OR2 %08x BR2 %08x\n", memctl->memc_or2, memctl->memc_br2);
- DEBUGF ("OR3 %08x BR3 %08x\n", memctl->memc_or3, memctl->memc_br3);
- DEBUGF ("OR4 %08x BR4 %08x\n", memctl->memc_or4, memctl->memc_br4);
- DEBUGF ("OR5 %08x BR5 %08x\n", memctl->memc_or5, memctl->memc_br5);
- DEBUGF ("OR6 %08x BR6 %08x\n", memctl->memc_or6, memctl->memc_br6);
- DEBUGF ("OR7 %08x BR7 %08x\n", memctl->memc_or7, memctl->memc_br7);
- DEBUGF ("OR8 %08x BR8 %08x\n", memctl->memc_or8, memctl->memc_br8);
-
- DEBUGF ("UPMA addr 0x0\n");
- memctl->memc_mamr = 0x00 | MxMR_OP_RARR | MxMR_GPL_x4DIS;
- for (i = 0; i < 0x8; i++) {
- tmp = can->cpu_interface;
- udelay (1);
- DEBUGF (" %08x ", memctl->memc_mdr);
- }
- DEBUGF ("\nUPMA addr 0x18\n");
- memctl->memc_mamr = 0x18 | MxMR_OP_RARR | MxMR_GPL_x4DIS;
- for (i = 0; i < 0x8; i++) {
- tmp = can->cpu_interface;
- udelay (1);
- DEBUGF (" %08x ", memctl->memc_mdr);
- }
- DEBUGF ("\n");
- memctl->memc_mamr = MxMR_GPL_x4DIS;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_r (void)
-{
- fpga_init ();
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/siemens/SCM/scm.h b/board/siemens/SCM/scm.h
deleted file mode 100644
index cb5e03e..0000000
--- a/board/siemens/SCM/scm.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __SCM_H
-#define __SCM_H
-
-/*----------------*/
-/* CAN Structures */
-/*----------------*/
-
-/* Message */
-struct can_msg {
- uchar ctrl_0;
- uchar ctrl_1;
- uchar arbit_0;
- uchar arbit_1;
- uchar arbit_2;
- uchar arbit_3;
- uchar config;
- uchar data[8];
-} __attribute__ ((packed));
-
-typedef struct can_msg can_msg_t;
-
-/* CAN Register */
-typedef struct can_reg {
- uchar ctrl;
- uchar status;
- uchar cpu_interface;
- uchar resv0;
- ushort high_speed_rd;
- ushort gbl_mask_std;
- uint gbl_mask_extd;
- uint msg15_mask;
- can_msg_t msg1;
- uchar clkout;
- can_msg_t msg2;
- uchar bus_config;
- can_msg_t msg3;
- uchar bit_timing_0;
- can_msg_t msg4;
- uchar bit_timing_1;
- can_msg_t msg5;
- uchar interrupt;
- can_msg_t msg6;
- uchar resv1;
- can_msg_t msg7;
- uchar resv2;
- can_msg_t msg8;
- uchar resv3;
- can_msg_t msg9;
- uchar p1conf;
- can_msg_t msg10;
- uchar p2conf;
- can_msg_t msg11;
- uchar p1in;
- can_msg_t msg12;
- uchar p2in;
- can_msg_t msg13;
- uchar p1out;
- can_msg_t msg14;
- uchar p2out;
- can_msg_t msg15;
- uchar ser_res_addr;
- uchar resv_cs[0x8000-0x100]; /* 0x8000 is the min size for CS */
-} can_reg_t;
-
-
-#endif /* __SCM_H */
diff --git a/board/siemens/common/README b/board/siemens/common/README
deleted file mode 100644
index 7f1c8cd..0000000
--- a/board/siemens/common/README
+++ /dev/null
@@ -1,27 +0,0 @@
-CCM/SCM-Ergaenzungen fuer U-Boot und Linux:
--------------------------------------------
-
-Es gibt nun ein gemeinsames Kommando zum Laden der FPGAs:
-
- => help fpga
- fpga fpga status [name] - print FPGA status
- fpga reset [name] - reset FPGA
- fpga load [name] addr - load FPGA configuration data
-
-Der Name kann beim CCM-Module auch weggelassen werden.
-Die Laengenangabe und damit "puma_len" ist nicht mehr
-noetig:
-
- => fpga load puma 40600000
- FPGA load PUMA: addr 40600000: (00000005)... done
-
-Die MTD-Partitionierung kann nun mittels "bootargs" ueber-
-geben werden:
-
- => printenv addmtd
- addmtd=setenv bootargs ${bootargs}
- mtdparts=0:256k(U-Boot)ro,768k(Kernel),-(Rest)\;1:-(myJFFS2)
-
-Die Portierung auf SMC ist natuerlich noch nicht getestet.
-
-Wolfgang Grandegger (04.06.2002)
diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c
deleted file mode 100644
index ef8bfde..0000000
--- a/board/siemens/common/fpga.c
+++ /dev/null
@@ -1,369 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-#include <common.h>
-
-#include "fpga.h"
-
-int power_on_reset(void);
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-
-static int fpga_get_version(fpga_t* fpga, char* name)
-{
- char vname[12];
- /*
- * Net-list string format:
- * "vvvvvvvvddddddddn...".
- * Version Date Name
- * "0000000322042002PUMA" = PUMA version 3 from 22.04.2002.
- */
- if (strlen(name) < (16 + strlen(fpga->name)))
- goto failure;
- /* Check FPGA name */
- if (strcmp(&name[16], fpga->name) != 0)
- goto failure;
- /* Get version number */
- memcpy(vname, name, 8);
- vname[8] = '\0';
- return simple_strtoul(vname, NULL, 16);
-
- failure:
- printf("Image name %s is invalid\n", name);
- return -1;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-static fpga_t* fpga_get(char* fpga_name)
-{
- char name[FPGA_NAME_LEN];
- int i;
-
- if (strlen(fpga_name) >= FPGA_NAME_LEN)
- goto failure;
- for (i = 0; i < strlen(fpga_name); i++)
- name[i] = toupper(fpga_name[i]);
- name[i] = '\0';
- for (i = 0; i < fpga_count; i++) {
- if (strcmp(name, fpga_list[i].name) == 0)
- return &fpga_list[i];
- }
- failure:
- printf("FPGA: name %s is invalid\n", fpga_name);
- return NULL;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-static void fpga_status (fpga_t* fpga)
-{
- /* Check state */
- if (fpga_control(fpga, FPGA_DONE_IS_HIGH))
- printf ("%s is loaded (%08lx)\n",
- fpga->name, fpga_control(fpga, FPGA_GET_ID));
- else
- printf ("%s is NOT loaded\n", fpga->name);
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-#define FPGA_RESET_TIMEOUT 100 /* = 10 ms */
-
-static int fpga_reset (fpga_t* fpga)
-{
- int i;
-
- /* Set PROG to low and wait til INIT goes low */
- fpga_control(fpga, FPGA_PROG_SET_LOW);
- for (i = 0; i < FPGA_RESET_TIMEOUT; i++) {
- udelay (100);
- if (!fpga_control(fpga, FPGA_INIT_IS_HIGH))
- break;
- }
- if (i == FPGA_RESET_TIMEOUT)
- goto failure;
-
- /* Set PROG to high and wait til INIT goes high */
- fpga_control(fpga, FPGA_PROG_SET_HIGH);
- for (i = 0; i < FPGA_RESET_TIMEOUT; i++) {
- udelay (100);
- if (fpga_control(fpga, FPGA_INIT_IS_HIGH))
- break;
- }
- if (i == FPGA_RESET_TIMEOUT)
- goto failure;
-
- return 0;
- failure:
- return 1;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-#define FPGA_LOAD_TIMEOUT 100 /* = 10 ms */
-
-static int fpga_load (fpga_t* fpga, ulong addr, int checkall)
-{
- volatile uchar *fpga_addr = (volatile uchar *)fpga->conf_base;
- image_header_t *hdr = (image_header_t *)addr;
- ulong len;
- uchar *data;
- char msg[32];
- int verify, i;
-
-#if defined(CONFIG_FIT)
- if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
- puts ("Non legacy image format not supported\n");
- return -1;
- }
-#endif
-
- /*
- * Check the image header and data of the net-list
- */
- if (!image_check_magic (hdr)) {
- strcpy (msg, "Bad Image Magic Number");
- goto failure;
- }
-
- if (!image_check_hcrc (hdr)) {
- strcpy (msg, "Bad Image Header CRC");
- goto failure;
- }
-
- data = (uchar*)image_get_data (hdr);
- len = image_get_data_size (hdr);
-
- verify = getenv_yesno ("verify");
- if (verify) {
- if (!image_check_dcrc (hdr)) {
- strcpy (msg, "Bad Image Data CRC");
- goto failure;
- }
- }
-
- if (checkall && fpga_get_version(fpga, image_get_name (hdr)) < 0)
- return 1;
-
- /* align length */
- if (len & 1)
- ++len;
-
- /*
- * Reset FPGA and wait for completion
- */
- if (fpga_reset(fpga)) {
- strcpy (msg, "Reset Timeout");
- goto failure;
- }
-
- printf ("(%s)... ", image_get_name (hdr));
- /*
- * Copy data to FPGA
- */
- fpga_control (fpga, FPGA_LOAD_MODE);
- while (len--) {
- *fpga_addr = *data++;
- }
- fpga_control (fpga, FPGA_READ_MODE);
-
- /*
- * Wait for completion and check error status if timeout
- */
- for (i = 0; i < FPGA_LOAD_TIMEOUT; i++) {
- udelay (100);
- if (fpga_control (fpga, FPGA_DONE_IS_HIGH))
- break;
- }
- if (i == FPGA_LOAD_TIMEOUT) {
- if (fpga_control(fpga, FPGA_INIT_IS_HIGH))
- strcpy(msg, "Invalid Size");
- else
- strcpy(msg, "CRC Error");
- goto failure;
- }
-
- printf("done\n");
- return 0;
-
- failure:
-
- printf("ERROR: %s\n", msg);
- return 1;
-}
-
-#if defined(CONFIG_CMD_BSP)
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- ulong addr = 0;
- int i;
- fpga_t* fpga;
-
- if (argc < 2)
- goto failure;
-
- if (strncmp(argv[1], "stat", 4) == 0) { /* status */
- if (argc == 2) {
- for (i = 0; i < fpga_count; i++) {
- fpga_status (&fpga_list[i]);
- }
- }
- else if (argc == 3) {
- if ((fpga = fpga_get(argv[2])) == 0)
- goto failure;
- fpga_status (fpga);
- }
- else
- goto failure;
- }
- else if (strcmp(argv[1],"load") == 0) { /* load */
- if (argc == 3 && fpga_count == 1) {
- fpga = &fpga_list[0];
- }
- else if (argc == 4) {
- if ((fpga = fpga_get(argv[2])) == 0)
- goto failure;
- }
- else
- goto failure;
-
- addr = simple_strtoul(argv[argc-1], NULL, 16);
-
- printf ("FPGA load %s: addr %08lx: ",
- fpga->name, addr);
- fpga_load (fpga, addr, 1);
-
- }
- else if (strncmp(argv[1], "rese", 4) == 0) { /* reset */
- if (argc == 2 && fpga_count == 1) {
- fpga = &fpga_list[0];
- }
- else if (argc == 3) {
- if ((fpga = fpga_get(argv[2])) == 0)
- goto failure;
- }
- else
- goto failure;
-
- printf ("FPGA reset %s: ", fpga->name);
- if (fpga_reset(fpga))
- printf ("ERROR: Timeout\n");
- else
- printf ("done\n");
- }
- else
- goto failure;
-
- return 0;
-
- failure:
- return cmd_usage(cmdtp);
-}
-
-U_BOOT_CMD(
- fpga, 4, 1, do_fpga,
- "access FPGA(s)",
- "fpga status [name] - print FPGA status\n"
- "fpga reset [name] - reset FPGA\n"
- "fpga load [name] addr - load FPGA configuration data"
-);
-
-#endif
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-int fpga_init (void)
-{
- ulong addr;
- ulong new_id, old_id = 0;
- image_header_t *hdr;
- fpga_t* fpga;
- int do_load, i, j;
- char name[16], *s;
-
- /*
- * Port setup for FPGA control
- */
- for (i = 0; i < fpga_count; i++) {
- fpga_control(&fpga_list[i], FPGA_INIT_PORTS);
- }
-
- /*
- * Load FPGA(s): a new net-list is loaded if the FPGA is
- * empty, Power-on-Reset or the old one is not up-to-date
- */
- for (i = 0; i < fpga_count; i++) {
- fpga = &fpga_list[i];
- printf ("%s: ", fpga->name);
-
- for (j = 0; j < strlen(fpga->name); j++)
- name[j] = tolower(fpga->name[j]);
- name[j] = '\0';
- sprintf(name, "%s_addr", name);
- addr = 0;
- if ((s = getenv(name)) != NULL)
- addr = simple_strtoul(s, NULL, 16);
-
- if (!addr) {
- printf ("env. variable %s undefined\n", name);
- return 1;
- }
-
- hdr = (image_header_t *)addr;
-#if defined(CONFIG_FIT)
- if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
- puts ("Non legacy image format not supported\n");
- return -1;
- }
-#endif
-
- if ((new_id = fpga_get_version(fpga, image_get_name (hdr))) == -1)
- return 1;
-
- do_load = 1;
-
- if (!power_on_reset() && fpga_control(fpga, FPGA_DONE_IS_HIGH)) {
- old_id = fpga_control(fpga, FPGA_GET_ID);
- if (new_id == old_id)
- do_load = 0;
- }
-
- if (do_load) {
- printf ("loading ");
- fpga_load (fpga, addr, 0);
- } else {
- printf ("loaded (%08lx)\n", old_id);
- }
- }
-
- return 0;
-}
diff --git a/board/siemens/common/fpga.h b/board/siemens/common/fpga.h
deleted file mode 100644
index 2de25b0..0000000
--- a/board/siemens/common/fpga.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#ifndef _FPGA_H_
-#define _FPGA_H_
-
-#define FPGA_INIT_IS_HIGH 0
-#define FPGA_INIT_SET_HIGH 1
-#define FPGA_INIT_SET_LOW 2
-#define FPGA_PROG_SET_HIGH 3
-#define FPGA_PROG_SET_LOW 4
-#define FPGA_DONE_IS_HIGH 5
-#define FPGA_READ_MODE 6
-#define FPGA_LOAD_MODE 7
-#define FPGA_GET_ID 8
-#define FPGA_INIT_PORTS 9
-
-#define FPGA_NAME_LEN 8
-typedef struct {
- char name[FPGA_NAME_LEN];
- ulong conf_base;
- uint init_mask;
- uint prog_mask;
- uint done_mask;
-} fpga_t;
-
-extern fpga_t fpga_list[];
-extern int fpga_count;
-
-ulong fpga_control (fpga_t* fpga, int cmd);
-
-#endif /* _FPGA_H_ */
diff --git a/board/tqc/tqm8xx/u-boot.lds b/board/tqc/tqm8xx/u-boot.lds
index 7cc41cd..e1e1ccd 100644
--- a/board/tqc/tqm8xx/u-boot.lds
+++ b/board/tqc/tqm8xx/u-boot.lds
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2012
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -41,8 +41,6 @@
drivers/net/libnet.o (.text*)
drivers/pcmcia/libpcmcia.o (.text.pcmcia_on)
drivers/pcmcia/libpcmcia.o (.text.pcmcia_hardware_enable)
- drivers/rtc/librtc.o (.text*)
- drivers/misc/libmisc.o (.text*)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv*)
diff --git a/board/westel/amx860/Makefile b/board/westel/amx860/Makefile
deleted file mode 100644
index 12e4aa6..0000000
--- a/board/westel/amx860/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS = $(BOARD).o flash.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/westel/amx860/amx860.c b/board/westel/amx860/amx860.c
deleted file mode 100644
index 91dcc0d..0000000
--- a/board/westel/amx860/amx860.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-const uint edo_60ns[] =
-{ 0x8ffbec24, 0x0ff3ec04, 0x0cf3ec04, 0x00f3ec04,
- 0x00f3ec00, 0x37f7ec47, _NOT_USED_, _NOT_USED_,
- 0x8fffec24, 0x0ffbec04, 0x08f3ec04, 0x07f3ec08,
- 0x08f3ec04, 0x07f3ec48, 0x08f3ec04, 0x07f3ec48,
- 0x08f3ec04, 0x07f3ec48, 0x1ff7ec47, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- 0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x11bfcc47,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- 0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x03afcc4c,
- 0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
- 0x0cafcc00, 0x33bfcc4f, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- 0xc0ffcc84, 0x00ffcc04, 0x07ffcc04, 0x3fffcc06,
- 0xffffcc85, 0xffffcc05, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- 0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
- puts ("Board: AMX860\n");
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- /* AMX860: has 4 Mb of 60ns EDO DRAM, so start DRAM at 0 */
-
- upmconfig(UPMA, (uint *) edo_60ns, sizeof(edo_60ns)/sizeof(uint));
-
-#ifndef CONFIG_AMX_RAM_EXT
- memctl->memc_mptpr = 0x0400; /* divide by 16 */
-#else
- memctl->memc_mptpr = 0x0200;
-#endif
-
- memctl->memc_mamr = 0x30a21114;
- memctl->memc_or2 = 0xffc00800;
-#ifndef CONFIG_AMX_RAM_EXT
- memctl->memc_br2 = 0x81;
-
- return (4 << 20);
-#else
- memctl->memc_or1 = 0xff000800;
- memctl->memc_br1 = 0x00000081;
- memctl->memc_br2 = 0x01000081;
-
- return (20 << 20);
-#endif
-}
diff --git a/board/westel/amx860/flash.c b/board/westel/amx860/flash.c
deleted file mode 100644
index fe8bce4..0000000
--- a/board/westel/amx860/flash.c
+++ /dev/null
@@ -1,637 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_FLASH
-
-#ifdef DEBUG_FLASH
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size_b0, size_b1;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
-
- size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
-#if defined(FLASH_BASE1_PRELIM) && (FLASH_BASE1_PRELIM != 0)
- DEBUGF("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE1_PRELIM);
-
- size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
- if (size_b1 > size_b0) {
- printf ("## ERROR: "
- "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
- size_b1, size_b1<<20,
- size_b0, size_b0<<20
- );
- flash_info[0].flash_id = FLASH_UNKNOWN;
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[0].sector_count = -1;
- flash_info[1].sector_count = -1;
- flash_info[0].size = 0;
- flash_info[1].size = 0;
- return (0);
- }
-#else
- size_b1 = 0;
-#endif /* FLASH_BASE1_PRELIM */
-
- DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
- DEBUGF ("## Before remap: "
- "BR0: 0x%08x OR0: 0x%08x "
- "BR1: 0x%08x OR1: 0x%08x\n",
- memctl->memc_br0, memctl->memc_or0,
- memctl->memc_br1, memctl->memc_or1);
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
- DEBUGF("## BR0: 0x%08x OR0: 0x%08x\n",
- memctl->memc_br0, memctl->memc_or0);
-
- /* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_info[0].size = size_b0;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
- &flash_info[0]);
-#endif
-
- if (size_b1) {
- memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & OR_AM_MSK);
- memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
- BR_MS_GPCM | BR_V;
-
- DEBUGF("## BR1: 0x%08x OR1: 0x%08x\n",
- memctl->memc_br1, memctl->memc_or1);
-
- /* Re-do sizing to get full correct info */
- size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
- &flash_info[1]);
-
- flash_info[1].size = size_b1;
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-
-# if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[1]);
-# endif
-
-# ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
- &flash_info[1]);
-#endif
- } else {
-#ifndef CONFIG_AMX_RAM_EXT
- memctl->memc_br1 = 0; /* invalidate bank */
- memctl->memc_or1 = 0; /* invalidate bank */
-#endif
-
- DEBUGF("## DISABLE BR1: 0x%08x OR1: 0x%08x\n",
- memctl->memc_br1, memctl->memc_or1);
-
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
- flash_info[1].size = 0;
- }
-
- DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
- return (size_b0 + size_b1);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
- /* set sector offsets for uniform sector type */
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00040000);
- }
- } else if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n");
- break;
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- ulong value;
- ulong base = (ulong)addr;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00900090;
-
- value = addr[0];
-
- DEBUGF("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value);
-
- switch (value) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- value = addr[1]; /* device ID */
-
- DEBUGF("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value);
-
- switch (value) {
- case AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#if 0 /* enable when device IDs are available */
- case AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
- }
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr = (volatile unsigned long *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr = (volatile unsigned long *)info->start[0];
-
- *addr = 0x00F000F0; /* reset bank */
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_long*)(info->start[sect]);
- addr[0] = 0x00300030;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_long*)(info->start[l_sect]);
- while ((addr[0] & 0x00800080) != 0x00800080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
- addr[0] = 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00A000A0;
-
- *((vu_long *)dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/westel/amx860/u-boot.lds b/board/westel/amx860/u-boot.lds
deleted file mode 100644
index 9b69d3d..0000000
--- a/board/westel/amx860/u-boot.lds
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- net/libnet.o (.text*)
- board/westel/amx860/libamx860.o (.text*)
- *(.text.*printf)
-
- . = env_offset;
- common/env_embedded.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- #include <u-boot.lst>
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
diff --git a/board/westel/amx860/u-boot.lds.debug b/board/westel/amx860/u-boot.lds.debug
deleted file mode 100644
index 3e075a8..0000000
--- a/board/westel/amx860/u-boot.lds.debug
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- arch/powerpc/lib/extable.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- #include <u-boot.lst>
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
diff --git a/boards.cfg b/boards.cfg
index 4c63789..0ecd1b8 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -625,7 +625,6 @@
VoVPN-GW_66MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_66MHz
mgcoge powerpc mpc8260 km82xx keymile - km82xx:MGCOGE
mgcoge3ne powerpc mpc8260 km82xx keymile - km82xx:MGCOGE3NE
-SCM powerpc mpc8260 - siemens
TQM8255_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8255,300MHz
TQM8260_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz
TQM8260_AB powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz,L2_CACHE,BUSMODE_60x
@@ -861,11 +860,8 @@
AdderII powerpc mpc8xx adder - - Adder:MPC852T
AdderUSB powerpc mpc8xx adder - - Adder
ADS860 powerpc mpc8xx fads
-c2mon powerpc mpc8xx
cogent_mpc8xx powerpc mpc8xx cogent
-EP88x powerpc mpc8xx ep88x
ESTEEM192E powerpc mpc8xx esteem192e
-ETX094 powerpc mpc8xx etx094
FADS823 powerpc mpc8xx fads
FADS850SAR powerpc mpc8xx fads
FADS860T powerpc mpc8xx fads
@@ -883,7 +879,6 @@
IVMS8 powerpc mpc8xx ivm - - IVMS8:IVMS8_16M
IVMS8_128 powerpc mpc8xx ivm - - IVMS8:IVMS8_32M
IVMS8_256 powerpc mpc8xx ivm - - IVMS8:IVMS8_64M
-LANTEC powerpc mpc8xx lantec
lwmon powerpc mpc8xx
MBX powerpc mpc8xx mbx8xx
MBX860T powerpc mpc8xx mbx8xx
@@ -930,7 +925,6 @@
KUP4X powerpc mpc8xx kup4x kup
ELPT860 powerpc mpc8xx elpt860 LEOX
uc100 powerpc mpc8xx - manroland
-IAD210 powerpc mpc8xx - siemens
QS823 powerpc mpc8xx qs850 snmc
QS850 powerpc mpc8xx qs850 snmc
QS860T powerpc mpc8xx qs860t snmc
@@ -956,7 +950,6 @@
TTTech powerpc mpc8xx tqm8xx tqc - TQM823L:LCD,SHARP_LQ104V7DS01
virtlab2 powerpc mpc8xx tqm8xx tqc
wtk powerpc mpc8xx tqm8xx tqc - TQM823L:LCD,SHARP_LQ065T9DR51U
-AMX860 powerpc mpc8xx amx860 westel
csb272 powerpc ppc4xx
csb472 powerpc ppc4xx
G2000 powerpc ppc4xx g2000
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index ed779e2..2b868e6 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,12 @@
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+AMX860 powerpc mpc860 - - Wolfgang Denk <wd@denx.de>
+c2mon powerpc mpc855 - - Wolfgang Denk <wd@denx.de>
+ETX094 powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
+IAD210 powerpc mpc860 - - -
+LANTEC powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
+SCM powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de>
SX1 arm arm925t - -
TQM85xx powerpc MPC85xx d923a5d5 2012-10-04 Stefan Roese <sr@denx.de>
apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
diff --git a/include/commproc.h b/include/commproc.h
index 8b8cc45..7ca28c8 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -466,39 +466,6 @@
#endif /* MPC860ADS */
-/*** AMX860 **********************************************/
-
-#if defined(CONFIG_AMX860)
-
-/* This ENET stuff is for the AMX860 with ethernet on SCC1.
- */
-
-#define PROFF_ENET PROFF_SCC1
-#define CPM_CR_ENET CPM_CR_CH_SCC1
-#define SCC_ENET 0
-
-#define PA_ENET_RXD ((ushort)0x0001)
-#define PA_ENET_TXD ((ushort)0x0002)
-#define PA_ENET_TCLK ((ushort)0x0400)
-#define PA_ENET_RCLK ((ushort)0x0800)
-
-#define PB_ENET_TENA ((uint)0x00001000)
-
-#define PC_ENET_CLSN ((ushort)0x0010)
-#define PC_ENET_RENA ((ushort)0x0020)
-
-#define SICR_ENET_MASK ((uint)0x000000ff)
-#define SICR_ENET_CLKRT ((uint)0x0000003e)
-
-/* 68160 PHY control */
-
-#define PB_ENET_ETHLOOP ((uint)0x00020000)
-#define PB_ENET_TPFLDL ((uint)0x00010000)
-#define PB_ENET_TPSQEL ((uint)0x00008000)
-#define PD_ENET_ETH_EN ((ushort)0x0004)
-
-#endif /* CONFIG_AMX860 */
-
/*** BSEIP **********************************************************/
#ifdef CONFIG_BSEIP
@@ -547,38 +514,6 @@
#define SICR_ENET_CLKRT ((uint)0x00003400)
#endif /* CONFIG_FLAGADM */
-/*** C2MON **********************************************************/
-
-#ifdef CONFIG_C2MON
-
-# ifndef CONFIG_FEC_ENET /* use SCC for 10Mbps Ethernet */
-# error "Ethernet on SCC not supported on C2MON Board!"
-# else /* Use FEC for Fast Ethernet */
-
-#undef SCC_ENET
-#define FEC_ENET
-
-#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
-#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
-#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
-#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
-#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
-#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
-#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
-#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
-#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
-#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
-#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
-#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
-#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
-
-#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
-
-# endif /* CONFIG_FEC_ENET */
-#endif /* CONFIG_C2MON */
-
-/*********************************************************************/
-
/*** ELPT860 *********************************************************/
#ifdef CONFIG_ELPT860
@@ -828,33 +763,6 @@
#endif /* CONFIG_HERMES */
-/*** IAD210 **********************************************************/
-
-/* The IAD210 uses the FEC on a MPC860P for Ethernet */
-
-#if defined(CONFIG_IAD210)
-
-# define FEC_ENET /* use FEC for Ethernet */
-# undef SCC_ENET
-
-# define PD_MII_TXD1 ((ushort) 0x1000 ) /* PD 3 */
-# define PD_MII_TXD2 ((ushort) 0x0800 ) /* PD 4 */
-# define PD_MII_TXD3 ((ushort) 0x0400 ) /* PD 5 */
-# define PD_MII_RX_DV ((ushort) 0x0200 ) /* PD 6 */
-# define PD_MII_RX_ERR ((ushort) 0x0100 ) /* PD 7 */
-# define PD_MII_RX_CLK ((ushort) 0x0080 ) /* PD 8 */
-# define PD_MII_TXD0 ((ushort) 0x0040 ) /* PD 9 */
-# define PD_MII_RXD0 ((ushort) 0x0020 ) /* PD 10 */
-# define PD_MII_TX_ERR ((ushort) 0x0010 ) /* PD 11 */
-# define PD_MII_MDC ((ushort) 0x0008 ) /* PD 12 */
-# define PD_MII_RXD1 ((ushort) 0x0004 ) /* PD 13 */
-# define PD_MII_RXD2 ((ushort) 0x0002 ) /* PD 14 */
-# define PD_MII_RXD3 ((ushort) 0x0001 ) /* PD 15 */
-
-# define PD_MII_MASK ((ushort) 0x1FFF ) /* PD 3...15 */
-
-#endif /* CONFIG_IAD210 */
-
/*** ICU862 **********************************************************/
#if defined(CONFIG_ICU862)
@@ -954,34 +862,6 @@
#endif /* CONFIG_KUP4K */
-
-/*** LANTEC *********************************************************/
-
-#if defined(CONFIG_LANTEC) && CONFIG_LANTEC >= 2
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC2 use.
- */
-#define PROFF_ENET PROFF_SCC2
-#define CPM_CR_ENET CPM_CR_CH_SCC2
-#define SCC_ENET 1
-#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
-#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
-#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */
-#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
-
-#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
-
-#define PC_ENET_LBK ((ushort)0x0010) /* PC 11 */
-#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
-#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
-
-/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK2) to
- * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
- */
-#define SICR_ENET_MASK ((uint)0x0000FF00)
-#define SICR_ENET_CLKRT ((uint)0x00002E00)
-#endif /* CONFIG_LANTEC v2 */
-
/*** LWMON **********************************************************/
#if defined(CONFIG_LWMON)
@@ -1373,15 +1253,14 @@
#endif /* CONFIG_SXNI855T */
-/*** MVS1, TQM823L/M, TQM850L/M, TQM885D, ETX094, R360MPI **********/
+/*** MVS1, TQM823L/M, TQM850L/M, TQM885D, R360MPI **********/
#if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \
defined(CONFIG_R360MPI) || defined(CONFIG_RBC823) || \
- defined(CONFIG_TQM823L) || defined(CONFIG_TQM823M) || \
- defined(CONFIG_TQM850L) || defined(CONFIG_TQM850M) || \
- defined(CONFIG_TQM885D) || defined(CONFIG_ETX094) || \
- defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2)|| \
- (defined(CONFIG_LANTEC) && CONFIG_LANTEC < 2)
+ defined(CONFIG_RRVISION)|| defined(CONFIG_TQM823L) || \
+ defined(CONFIG_TQM823M) || defined(CONFIG_TQM850L) || \
+ defined(CONFIG_TQM850M) || defined(CONFIG_TQM885D) || \
+ defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2)
/* Bits in parallel I/O port registers that have to be set/cleared
* to configure the pins for SCC2 use.
diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h
deleted file mode 100644
index e7a6c80..0000000
--- a/include/configs/AMX860.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC860 1
-#define CONFIG_AMX860 1
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#undef CONFIG_8xx_CONS_SMC1 /* Console is on SCC2 */
-#undef CONFIG_8xx_CONS_SMC2
-#define CONFIG_8xx_CONS_SCC2 1
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-
-#define MPC8XX_FACT 10 /* Multiply by 10 */
-#define MPC8XX_XIN 5000000 /* 5 MHz in */
-#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
-
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_BOOTCOMMAND \
- "bootp;" \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
- "bootm" /* autoboot command */
-
-#undef CONFIG_BOOTARGS
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-
-#if defined(CONFIG_CMD_KGDB)
-#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
-#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */
-#endif
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_SUBNETMASK
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0200000 /* 1 ... 4 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * U-Boot for AMX board supports two types of memory extension
- * modules: one that provides 4 MB flash memory, and another one with
- * 16 MB EDO DRAM.
- *
- * The flash module swaps the CS0 and CS1 signals: if the module is
- * installed, CS0 is connected to Flash on the module and CS1 is
- * connected to the on-board Flash. This means that you must intall
- * U-Boot when the Flash module is plugged in, if you plan to use
- * it.
- *
- * To enable support for the DRAM extension card, CONFIG_AMX_RAM_EXT
- * must be defined. The DRAM module uses CS1.
- *
- * Only one of these modules may be installed at a time. If U-Boot
- * is compiled with the CONFIG_AMX_RAM_EXT option set, it will not
- * work if the Flash extension module is installed instead of the
- * DRAM module.
- */
-#define CONFIG_AMX_RAM_EXT /* 16Mb Ext. DRAM module support */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- *
- * Use 4 MB for without and 8 MB with 16 MB DRAM extension module
- * (CONFIG_AMX_RAM_EXT)
- */
-#ifdef CONFIG_AMX_RAM_EXT
-# define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-#else
-# define CONFIG_SYS_BOOTMAPSZ (4 << 20) /* Initial Memory map for Linux */
-#endif
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control (15-29)
- */
-#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
- PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
-#define CONFIG_SYS_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
-
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-#ifndef CONFIG_AMX_RAM_EXT
-#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */
-#endif
-
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xFFC00000 /* OR addr mask */
-
-/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
-/* 0x00000800 0x00000400 0x00000100 0x00000030 0x00000004 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-
-#define CONFIG_SYS_OR0_PRELIM 0xFFC00954 /* Real values for the board */
-#define CONFIG_SYS_BR0_PRELIM 0x40000001 /* Real values for the board */
-
-#ifndef CONFIG_AMX_RAM_EXT
-#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
-#define CONFIG_SYS_OR1_PRELIM 0xFFC00954 /* Real values for the board */
-#define CONFIG_SYS_BR1_PRELIM 0x60000001 /* Real values for the board */
-#endif
-
-/* DSP ("Glue") Xilinx */
-#define CONFIG_SYS_OR6_PRELIM 0xFFFF8000 /* 32kB, 15 waits, cs after addr, no bursts */
-#define CONFIG_SYS_BR6_PRELIM 0x60000401 /* use GPCM for CS generation, 8 bit port */
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h
deleted file mode 100644
index 2703625..0000000
--- a/include/configs/ETX094.h
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
-#define CONFIG_ETX094 1 /* ...on a ETX_094 board */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 57600
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#define CONFIG_BOARD_TYPES 1 /* support board types */
-
-#define CONFIG_FLASH_16BIT /* for board with 16bit wide flash */
-#undef SB_ETX094 /* only for SB-Board with 16MB SDRAM */
-#define CONFIG_BOOTP_RANDOM_DELAY /* graceful BOOTP recovery mode */
-
-#define CONFIG_ETHADDR 08:00:06:00:00:00
-
-#ifdef CONFIG_ETHADDR
-#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 /* default MAC can be overwritten once */
-#endif
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_RAMBOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/ram rw ramdisk_size=4690 " \
- "U-Boot_version=U-Boot-1.0.x-Date " \
- "panic=1 " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-#define CONFIG_NFSBOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${nfsip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#define CONFIG_WATCHDOG 1 /* watchdog enabled */
-
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#ifdef DEBUG
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#ifdef CONFIG_FLASH_16BIT
-#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */
-#else
-#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-#endif
-
-/*-----------------------------------------------------------------------
- * Hardware Information Block
- */
-#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
-#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
-#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit - leave PLL multiplication factor unchanged !
- */
-#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
-#define CONFIG_SYS_SCCR (SCCR_TBS | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 1, CSNT = 0, SCY = 2, EHTR = 0 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV2 | OR_BI | \
- OR_SCY_2_CLK | OR_TRLX )
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-
-#ifdef CONFIG_FLASH_16BIT /* 16 bit data port */
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
-#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
-#else /* 32 bit data port */
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32)
-#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32)
-#endif /* CONFIG_FLASH_16BIT */
-
-#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
-#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
-
-/*
- * BR2/3 and OR2/3 (SDRAM)
- *
- */
-#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
-
-#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM
-#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA 23 /* start with divider for 100 MHz */
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X)
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h
deleted file mode 100644
index 94b05dc..0000000
--- a/include/configs/IAD210.h
+++ /dev/null
@@ -1,381 +0,0 @@
-/*
- * (C) Copyright 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <mpc8xx_irq.h>
-
-
-# ifdef DEBUG
-# warning DEBUG Defined
-# endif /* DEBUG */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC860 1
-#define CONFIG_IAD210 1 /* ...on a IAD210 module */
-#define CONFIG_MPC860T 1
-#define CONFIG_MPC862 1
-
-#define CONFIG_SYS_TEXT_BASE 0x08000000
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-
-#undef CONFIG_8xx_CONS_SMC1
-#undef CONFIG_8xx_CONS_SMC2
-#define CONFIG_8xx_CONS_SCC2 /* V24 on SCC2 */
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600
-
-
-# define MPC8XX_FACT 16
-# define CONFIG_8xx_GCLK_FREQ (64000000L) /* define if can't use get_gclk_freq */
-# define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#if 0
-# define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-# define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-/* using this define saves us updating another source file */
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R
-
-#undef CONFIG_BOOTARGS
-/* #define CONFIG_BOOTCOMMAND \
- "bootp;" \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
- "bootm"
-*/
-
-#define CONFIG_BOOTCOMMAND \
- "setenv bootargs root=/dev/nfs" \
- "ip=192.168.28.129:139.10.137.138:192.168.28.1:255.255.255.0:iadlinux002::off; " \
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/* #define CONFIG_STATUS_LED 1*/ /* Status LED enabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-# undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
-# define CONFIG_FEC_ENET 1 /* use FEC ethernet */
-# define CONFIG_MII 1
-# define CONFIG_SYS_DISCOVER_PHY 1
-# define CONFIG_FEC_UTOPIA 1
-# define CONFIG_ETHADDR 08:00:06:26:A2:6D
-# define CONFIG_IPADDR 192.168.28.128
-# define CONFIG_SERVERIP 139.10.137.138
-# define CONFIG_SYS_DISCOVER_PHY 1
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-# define CONFIG_SYS_I2C_SPEED 50000
-# define CONFIG_SYS_I2C_SLAVE 0xDD
-# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define PB_SCL 0x00000020 /* PB 26 */
-#define PB_SDA 0x00000010 /* PB 27 */
-
-#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
-#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
-#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
-#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
-#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
- else immr->im_cpm.cp_pbdat &= ~PB_SDA
-#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
- else immr->im_cpm.cp_pbdat &= ~PB_SCL
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFFF00000
-#define CONFIG_SYS_IMMR_SIZE ((uint)(64 * 1024))
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x08000000
-#define CONFIG_SYS_FLASH_SIZE ((uint)(4 * 1024 * 1024)) /* max 16Mbyte */
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#if defined(DEBUG)
-# define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-# define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-
-# define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-# define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x8000
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control (15-29)
- */
-#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
- PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
-
-#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_COM00 | SCCR_DFSYNC00 | \
- SCCR_DFBRG00 | SCCR_DFNL000 | SCCR_DFNH000 | \
- SCCR_DFLCD000 |SCCR_DFALCD00 )
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration Register 19-4
- *-----------------------------------------------------------------------
- */
-/* +0x09C4 => DRQP = 10 (IDMA requests have lowest priority) */
-#define CONFIG_SYS_RCCR 0x0020
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- */
-#define PCMCIA_MEM_ADDR ((uint)0xff020000)
-#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER 0
-
-/* Because of the way the 860 starts up and assigns CS0 the
-* entire address space, we have to set the memory controller
-* differently. Normally, you write the option register
-* first, and then enable the chip select by writing the
-* base register. For CS0, you must write the base register
-* first, followed by the option register.
-*/
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0xF8000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xF8000000 /* OR addr mask */
-
-/* FLASH timing:
- TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | \
- OR_SCY_3_CLK | OR_EHTR)
-
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
-
-/*
- * BR2/3 and OR2/3 (SDRAM)
- *
- */
-#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-
-#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | OR_CSNT_SAM | OR_BI | OR_ACS_DIV4)
-#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA 124 /* start with divider for 64 MHz */
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_8X)
-
-#ifdef CONFIG_MPC860T
-
-/* Interrupt level assignments.
-*/
-#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
-
-#endif /* CONFIG_MPC860T */
-
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h
deleted file mode 100644
index c3855c3..0000000
--- a/include/configs/LANTEC.h
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2001
- * Torsten Stevens, FHG IMS, stevens@ims.fhg.de
- * Bruno Achauer, Exet AG, bruno@exet-ag.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- * [derived from config_TQM850L.h]
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
-#define CONFIG_LANTEC 2 /* ...on a Lantec rev.2 board */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-/*
- * Port assignments (CONFIG_LANTEC == 1):
- * - SMC1: J11 (MDB) ?
- * - SMC2: J6 (Feature connector)
- * - SCC2: J9 (RJ45)
- * - SCC3: J8 (Sub-D9)
- *
- * Port assignments (CONFIG_LANTEC == 2): TBD
- */
-
-
-#undef CONFIG_8xx_CONS_SMC2 /* Console is on SMC2 */
-#define CONFIG_8xx_CONS_SCC3
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "setenv bootargs root=/dev/ram panic=5;bootm 40040000 400A0000"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_XIMG
-
-#if !(CONFIG_LANTEC >= 2)
- #undef CONFIG_CMD_DATE
- #undef CONFIG_CMD_NET
-#endif
-
-
-#if CONFIG_LANTEC >= 2
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_DLK)
-
-/*-----------------------------------------------------------------------
- * Clock Setting - Has the Lantec board a 32kHz clock ??? [XXX]
- *-----------------------------------------------------------------------
- */
-#define CONFIG_8xx_GCLK_FREQ 33000000
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
- */
- /* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
- /* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_SCCR (SCCR_TBS | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/5 and OR0/5 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-#define FLASH_BASE5_PRELIM 0x60000000 /* FLASH bank #1 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/* FLASH timing */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | \
- OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
-
-#define CONFIG_SYS_OR5_REMAP CONFIG_SYS_OR0_REMAP
-#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_OR0_PRELIM
-#define CONFIG_SYS_BR5_PRELIM ((FLASH_BASE5_PRELIM & BR_BA_MSK) | BR_V )
-
-/*
- * BR2/3 and OR2/3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
-
-/* SDRAM timing: Multiplexed addresses */
-#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM)
-
-#define CONFIG_SYS_OR3_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL \
- ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT ""
-#define MTDPARTS_DEFAULT ""
-*/
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/SCM.h b/include/configs/SCM.h
deleted file mode 100644
index 87d52ba..0000000
--- a/include/configs/SCM.h
+++ /dev/null
@@ -1,710 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */
-#define CONFIG_TQM8260 200 /* ...on a TQM8260 module Rev.200 */
-#define CONFIG_SCM 1 /* ...on a System Controller Module */
-#define CONFIG_CPM2 1 /* Has a CPM2 */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#if (CONFIG_TQM8260 <= 100)
-# error "TQM8260 module revison not supported"
-#endif
-
-/* We use a TQM8260 module with a 300MHz CPU */
-#define CONFIG_300MHz
-
-/* Define 60x busmode only if your TQM8260 has L2 cache! */
-#ifdef CONFIG_L2_CACHE
-# define CONFIG_BUSMODE_60x 1 /* bus mode: 60x */
-#else
-# undef CONFIG_BUSMODE_60x /* bus mode: 8260 */
-#endif
-
-/* The board with 300MHz CPU doesn't have L2 cache, but works in 60x bus mode */
-#ifdef CONFIG_300MHz
-# define CONFIG_BUSMODE_60x
-#endif
-
-#define CONFIG_82xx_CONS_SMC1 1 /* console on SMC1 */
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-
-/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/*
- * Software (bit-bang) I2C driver configuration
- */
-
-#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE (iop->pdir |= 0x00010000)
-#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
-#define I2C_READ ((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
- else iop->pdat &= ~0x00010000
-#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
- else iop->pdat &= ~0x00020000
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-#define CONFIG_I2C_X
-
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * if CONFIG_CONS_NONE is defined, then the serial console routines must
- * defined elsewhere (for example, on the cogent platform, there are serial
- * ports on the motherboard which are used for the serial console - see
- * cogent/cma101/serial.[ch]).
- */
-#define CONFIG_CONS_ON_SMC /* define if console on SMC */
-#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else*/
-#ifdef CONFIG_82xx_CONS_SMC1
-#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
-#endif
-#ifdef CONFIG_82xx_CONS_SMC2
-#define CONFIG_CONS_INDEX 2 /* which serial channel for console */
-#endif
-
-#undef CONFIG_CONS_USE_EXTC /* SMC/SCC use ext clock not brg_clk */
-#define CONFIG_CONS_EXTC_RATE 3686400 /* SMC/SCC ext clk rate in Hz */
-#define CONFIG_CONS_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9 */
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- *
- * (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
- * X.29 connector, and FCC2 is hardwired to the X.1 connector)
- */
-#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
-#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
-#undef CONFIG_ETHER_NONE /* define if ether on something else */
-#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */
-
-#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1)
-
-/*
- * - Rx-CLK is CLK12
- * - Tx-CLK is CLK11
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK12|CMXFCR_TF1CS_CLK11)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
-
-/*
- * - Rx-CLK is CLK15
- * - Tx-CLK is CLK16
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
-
-
-/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
-#ifndef CONFIG_300MHz
-#define CONFIG_8260_CLKIN 66666666 /* in Hz */
-#else
-#define CONFIG_8260_CLKIN 83333000 /* in Hz */
-#endif
-
-#if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC)
-#define CONFIG_BAUDRATE 230400
-#else
-#define CONFIG_BAUDRATE 115200
-#endif
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_BSP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC /* "bad" address */
-
-#define CONFIG_MISC_INIT_R /* have misc_init_r() function */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-
-/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/tqm8260/config.mk
- * The main FLASH is whichever is connected to *CS0.
- */
-#define CONFIG_SYS_FLASH0_BASE 0x40000000
-#define CONFIG_SYS_FLASH1_BASE 0x60000000
-#define CONFIG_SYS_FLASH0_SIZE 32
-#define CONFIG_SYS_FLASH1_SIZE 32
-
-/* Flash bank size (for preliminary settings)
- */
-#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-
-#if 0
-/* Start port with environment in flash; switch to EEPROM later */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x40000)
-#define CONFIG_ENV_SIZE 0x40000
-#define CONFIG_ENV_SECT_SIZE 0x40000
-#else
-/* Final version: environment in EEPROM */
-#define CONFIG_ENV_IS_IN_EEPROM 1
-#define CONFIG_ENV_OFFSET 0
-#define CONFIG_ENV_SIZE 2048
-#endif
-
-/*-----------------------------------------------------------------------
- * Hardware Information Block
- */
-#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
-#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
-#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
-
-/*-----------------------------------------------------------------------
- * Hard Reset Configuration Words
- *
- * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
- * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
- */
-#if defined(CONFIG_266MHz)
-#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB111 | HRCW_BMS | \
- HRCW_MODCK_H0111)
-#elif defined(CONFIG_300MHz)
-#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB111 | HRCW_BMS | \
- HRCW_MODCK_H0110)
-#else
-#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB111 | HRCW_BMS)
-#endif
-
-/* no slaves so just fill with zeros */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- *
- * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE, local SDRAM
- * is mapped at SDRAM_BASE2_PRELIM.
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
-
-/*-----------------------------------------------------------------------
- * Hardware Information Block
- */
-#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
-#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
-#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * HIDx - Hardware Implementation-dependent Registers 2-11
- *-----------------------------------------------------------------------
- * HID0 also contains cache control - initially enable both caches and
- * invalidate contents, then the final state leaves only the instruction
- * cache enabled. Note that Power-On and Hard reset invalidate the caches,
- * but Soft reset does not.
- *
- * HID1 has only read-only information - nothing to set.
- */
-#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
- HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID0_FINAL (HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID2 0
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register 5-5
- *-----------------------------------------------------------------------
- * turn on Checkstop Reset Enable
- */
-#define CONFIG_SYS_RMR RMR_CSRE
-
-/*-----------------------------------------------------------------------
- * BCR - Bus Configuration 4-25
- *-----------------------------------------------------------------------
- */
-#ifdef CONFIG_BUSMODE_60x
-#define CONFIG_SYS_BCR (BCR_EBM|BCR_L2C|BCR_LETM|\
- BCR_NPQM0|BCR_NPQM1|BCR_NPQM2) /* 60x mode */
-#else
-#define BCR_APD01 0x10000000
-#define CONFIG_SYS_BCR (BCR_APD01|BCR_ETM|BCR_LETM) /* 8260 mode */
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 4-31
- *-----------------------------------------------------------------------
- */
-#if 0
-#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC10|SIUMCR_APPC10)
-#else
-#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC00|SIUMCR_APPC10)
-#endif
-
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 4-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control 4-40
- *-----------------------------------------------------------------------
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- */
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control 9-8
- *-----------------------------------------------------------------------
- * Ensure DFBRG is Divide by 16
- */
-#define CONFIG_SYS_SCCR 0
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration 13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR 0
-
-/*
- * Init Memory Controller:
- *
- * Bank Bus Machine PortSz Device
- * ---- --- ------- ------ ------
- * 0 60x GPCM 64 bit FLASH
- * 1 60x SDRAM 64 bit SDRAM
- * 2 Local SDRAM 32 bit SDRAM
- *
- */
-
- /* Initialize SDRAM on local bus
- */
-#define CONFIG_SYS_INIT_LOCAL_SDRAM
-
-#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
-
-/* Minimum mask to separate preliminary
- * address ranges for CS[0:2]
- */
-#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (512<<20) /* less than 512 MB */
-#define CONFIG_SYS_LOCAL_SDRAM_LIMIT (128<<20) /* less than 128 MB */
-
-#define CONFIG_SYS_MPTPR 0x4000
-
-/*-----------------------------------------------------------------------------
- * Address for Mode Register Set (MRS) command
- *-----------------------------------------------------------------------------
- * In fact, the address is rather configuration data presented to the SDRAM on
- * its address lines. Because the address lines may be mux'ed externally either
- * for 8 column or 9 column devices, some bits appear twice in the 8260's
- * address:
- *
- * | (RFU) | (RFU) | WBL | TM | CL | BT | Burst Length |
- * | BA1 BA0 | A12 : A10 | A9 | A8 A7 | A6 : A4 | A3 | A2 : A0 |
- * 8 columns mux'ing: | A9 | A10 A21 | A22 : A24 | A25 | A26 : A28 |
- * 9 columns mux'ing: | A8 | A20 A21 | A22 : A24 | A25 | A26 : A28 |
- * Settings: | 0 | 0 0 | 0 1 0 | 0 | 0 1 0 |
- *-----------------------------------------------------------------------------
- */
-#define CONFIG_SYS_MRS_OFFS 0x00000110
-
-
-/* Bank 0 - FLASH
- */
-#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\
- BRx_PS_64 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\
- ORxG_CSNT |\
- ORxG_ACS_DIV1 |\
- ORxG_SCY_3_CLK |\
- ORxG_EHTR |\
- ORxG_TRLX)
-
- /* SDRAM on TQM8260 can have either 8 or 9 columns.
- * The number affects configuration values.
- */
-
-/* Bank 1 - 60x bus SDRAM
- */
-#define CONFIG_SYS_PSRT 0x20
-#define CONFIG_SYS_LSRT 0x20
-#ifndef CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\
- BRx_PS_64 |\
- BRx_MS_SDRAM_P |\
- BRx_V)
-
-#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1_8COL
-
-
- /* SDRAM initialization values for 8-column chips
- */
-#define CONFIG_SYS_OR1_8COL ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A7 |\
- ORxS_NUMR_12)
-
-#define CONFIG_SYS_PSDMR_8COL (PSDMR_PBI |\
- PSDMR_SDAM_A15_IS_A5 |\
- PSDMR_BSMA_A12_A14 |\
- PSDMR_SDA10_PBI1_A8 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_EAMUX |\
- PSDMR_CL_2)
-
- /* SDRAM initialization values for 9-column chips
- */
-#define CONFIG_SYS_OR1_9COL ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A5 |\
- ORxS_NUMR_13)
-
-#define CONFIG_SYS_PSDMR_9COL (PSDMR_PBI |\
- PSDMR_SDAM_A16_IS_A5 |\
- PSDMR_BSMA_A12_A14 |\
- PSDMR_SDA10_PBI1_A7 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_EAMUX |\
- PSDMR_CL_2)
-
-/* Bank 2 - Local bus SDRAM
- */
-#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
-#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BRx_BA_MSK) |\
- BRx_PS_32 |\
- BRx_MS_SDRAM_L |\
- BRx_V)
-
-#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_OR2_8COL
-
-#define SDRAM_BASE2_PRELIM 0x80000000
-
- /* SDRAM initialization values for 8-column chips
- */
-#define CONFIG_SYS_OR2_8COL ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A8 |\
- ORxS_NUMR_12)
-
-#define CONFIG_SYS_LSDMR_8COL (PSDMR_PBI |\
- PSDMR_SDAM_A15_IS_A5 |\
- PSDMR_BSMA_A13_A15 |\
- PSDMR_SDA10_PBI1_A9 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_BL |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_CL_2)
-
- /* SDRAM initialization values for 9-column chips
- */
-#define CONFIG_SYS_OR2_9COL ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A6 |\
- ORxS_NUMR_13)
-
-#define CONFIG_SYS_LSDMR_9COL (PSDMR_PBI |\
- PSDMR_SDAM_A16_IS_A5 |\
- PSDMR_BSMA_A13_A15 |\
- PSDMR_SDA10_PBI1_A8 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_BL |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_CL_2)
-
-#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-#define CONFIG_SYS_CAN0_BASE 0xc0000000
-#define CONFIG_SYS_CAN1_BASE 0xc0008000
-#define CONFIG_SYS_FIOX_BASE 0xc0010000
-#define CONFIG_SYS_FDOHM_BASE 0xc0018000
-#define CONFIG_SYS_EXTPROM_BASE 0xc2000000
-
-#define CONFIG_SYS_CAN_SIZE 0x00000100
-#define CONFIG_SYS_FIOX_SIZE 0x00000020
-#define CONFIG_SYS_FDOHM_SIZE 0x00002000
-#define CONFIG_SYS_EXTPROM_BANK_SIZE 0x01000000
-
-#define EXT_EEPROM_MAX_FLASH_BANKS 0x02
-
-/* CS3 - CAN 0
- */
-#define CONFIG_SYS_CAN0_BR3 ((CONFIG_SYS_CAN0_BASE & BRx_BA_MSK) |\
- BRx_PS_8 |\
- BRx_MS_UPMA |\
- BRx_V)
-
-#define CONFIG_SYS_CAN0_OR3 (P2SZ_TO_AM(CONFIG_SYS_CAN_SIZE) |\
- ORxU_BI |\
- ORxU_EHTR_4IDLE)
-
-/* CS4 - CAN 1
- */
-#define CONFIG_SYS_CAN1_BR4 ((CONFIG_SYS_CAN1_BASE & BRx_BA_MSK) |\
- BRx_PS_8 |\
- BRx_MS_UPMA |\
- BRx_V)
-
-#define CONFIG_SYS_CAN1_OR4 (P2SZ_TO_AM(CONFIG_SYS_CAN_SIZE) |\
- ORxU_BI |\
- ORxU_EHTR_4IDLE)
-
-/* CS5 - Extended PROM (16MB optional)
- */
-#define CONFIG_SYS_EXTPROM_BR5 ((CONFIG_SYS_EXTPROM_BASE & BRx_BA_MSK)|\
- BRx_PS_32 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-#define CONFIG_SYS_EXTPROM_OR5 (P2SZ_TO_AM(CONFIG_SYS_EXTPROM_BANK_SIZE)|\
- ORxG_CSNT |\
- ORxG_ACS_DIV4 |\
- ORxG_SCY_5_CLK |\
- ORxG_TRLX)
-
-/* CS6 - Extended PROM (16MB optional)
- */
-#define CONFIG_SYS_EXTPROM_BR6 (((CONFIG_SYS_EXTPROM_BASE + \
- CONFIG_SYS_EXTPROM_BANK_SIZE) & BRx_BA_MSK)|\
- BRx_PS_32 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-#define CONFIG_SYS_EXTPROM_OR6 (P2SZ_TO_AM(CONFIG_SYS_EXTPROM_BANK_SIZE)|\
- ORxG_CSNT |\
- ORxG_ACS_DIV4 |\
- ORxG_SCY_5_CLK |\
- ORxG_TRLX)
-
-/* CS7 - FPGA FIOX: Glue Logic
- */
-#define CONFIG_SYS_FIOX_BR7 ((CONFIG_SYS_FIOX_BASE & BRx_BA_MSK) |\
- BRx_PS_32 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-#define CONFIG_SYS_FIOX_OR7 (P2SZ_TO_AM(CONFIG_SYS_FIOX_SIZE) |\
- ORxG_ACS_DIV4 |\
- ORxG_SCY_5_CLK |\
- ORxG_TRLX)
-
-/* CS8 - FPGA DOH Master
- */
-#define CONFIG_SYS_FDOHM_BR8 ((CONFIG_SYS_FDOHM_BASE & BRx_BA_MSK) |\
- BRx_PS_16 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-#define CONFIG_SYS_FDOHM_OR8 (P2SZ_TO_AM(CONFIG_SYS_FDOHM_SIZE) |\
- ORxG_ACS_DIV4 |\
- ORxG_SCY_5_CLK |\
- ORxG_TRLX)
-
-
-/* FPGA configuration */
-#define CONFIG_SYS_PD_FIOX_PROG (1 << (31- 5)) /* PD 5 */
-#define CONFIG_SYS_PD_FIOX_DONE (1 << (31-28)) /* PD 28 */
-#define CONFIG_SYS_PD_FIOX_INIT (1 << (31-29)) /* PD 29 */
-
-#define CONFIG_SYS_PD_FDOHM_PROG (1 << (31- 4)) /* PD 4 */
-#define CONFIG_SYS_PD_FDOHM_DONE (1 << (31-26)) /* PD 26 */
-#define CONFIG_SYS_PD_FDOHM_INIT (1 << (31-27)) /* PD 27 */
-
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h
deleted file mode 100644
index 41ff008..0000000
--- a/include/configs/c2mon.h
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC855 1 /* This is a MPC855 CPU */
-#define CONFIG_C2MON 1 /* ...on a C2MON module */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_80MHz 1 /* Running at 5 * 16 = 80 MHz */
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#undef CONFIG_STATUS_LED /* Status LED disabled */
-
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_FEC_ENET 1 /* Use Fast Ethernet Controller */
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-
-#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-#else /* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-#endif /* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
- */
-#ifdef CONFIG_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */
-#define CONFIG_SYS_PLPRCR \
- ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
-#else /* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-#endif /* CONFIG_80MHz */
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
-#ifdef CONFIG_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-#else /* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_SCCR (SCCR_TBS | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-#endif /* CONFIG_80MHz */
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * PCMCIA Power Switch
- *
- * The C2MON uses a TPS2211A PC-Card Power-Interface Switch to
- * control the voltages on the PCMCIA slot which is connected
- * to Port C (all outputs) and Port B (Over-Current Input)
- *-----------------------------------------------------------------------
- */
- /* Output pins */
-#define TPS2211_VCCD0 0x0002 /* PC.14 */
-#define TPS2211_VCCD1 0x0004 /* PC.13 */
-#define TPS2211_VPPD0 0x0008 /* PC.12 */
-#define TPS2211_VPPD1 0x0010 /* PC.11 */
-#define TPS2211_OUTPUTS ( TPS2211_VCCD0 | TPS2211_VCCD1 | \
- TPS2211_VPPD0 | TPS2211_VPPD1 )
-
- /* Input pins */
-#define TPS2211_OC 0x00000200 /* PB.22: Over-Current */
-#define TPS2211_INPUTS ( TPS2211_OC )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
-#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
-
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
- OR_SCY_5_CLK | OR_EHTR)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
-
-#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
-#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
-#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
-
-/*
- * BR2/3 and OR2/3 (SDRAM)
- *
- */
-#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
-
-#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-#ifndef CONFIG_CAN_DRIVER
-#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM
-#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define CONFIG_SYS_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
-#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
-#define CONFIG_SYS_OR3_CAN (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CONFIG_SYS_BR3_CAN ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
- BR_PS_8 | BR_MS_UPMB | BR_V )
-#endif /* CONFIG_CAN_DRIVER */
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#endif /* __CONFIG_H */
diff --git a/include/pcmcia.h b/include/pcmcia.h
index ca0bf22..0cc7f3b 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -58,8 +58,6 @@
# define CONFIG_PCMCIA_SLOT_B
#elif defined(CONFIG_ICU862) /* The ICU862 use SLOT_B */
# define CONFIG_PCMCIA_SLOT_B
-#elif defined(CONFIG_C2MON) /* The C2MON use SLOT_B */
-# define CONFIG_PCMCIA_SLOT_B
#elif defined(CONFIG_R360MPI) /* The R360MPI use SLOT_B */
# define CONFIG_PCMCIA_SLOT_B
#elif defined(CONFIG_ATC) /* The ATC use SLOT_A */
diff --git a/include/status_led.h b/include/status_led.h
index c85c206..da9fae9 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -72,22 +72,6 @@
# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-/***** ETX_094 ********************************************************/
-#elif defined(CONFIG_ETX094)
-
-# define STATUS_LED_PAR im_ioport.iop_pdpar
-# define STATUS_LED_DIR im_ioport.iop_pddir
-# undef STATUS_LED_ODR
-# define STATUS_LED_DAT im_ioport.iop_pddat
-
-# define STATUS_LED_BIT 0x00000001
-# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE STATUS_LED_BLINKING
-
-# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
-
-# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-
/***** GEN860T *********************************************************/
#elif defined(CONFIG_GEN860T)
@@ -170,26 +154,6 @@
# define STATUS_LED_GREEN 1
# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */
-/***** LANTEC *********************************************************/
-#elif defined(CONFIG_LANTEC)
-
-# define STATUS_LED_PAR im_ioport.iop_pdpar
-# define STATUS_LED_DIR im_ioport.iop_pddir
-# undef STATUS_LED_ODR
-# define STATUS_LED_DAT im_ioport.iop_pddat
-
-# if CONFIG_LATEC < 2
-# define STATUS_LED_BIT 0x1000
-# else
-# define STATUS_LED_BIT 0x0800
-# endif
-# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE STATUS_LED_BLINKING
-
-# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
-
-# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-
/***** ICU862 ********************************************************/
#elif defined(CONFIG_ICU862)
diff --git a/post/cpu/mpc8xx/ether.c b/post/cpu/mpc8xx/ether.c
index fcbb300..728f7e0 100644
--- a/post/cpu/mpc8xx/ether.c
+++ b/post/cpu/mpc8xx/ether.c
@@ -381,49 +381,6 @@
immr->im_cpm.cp_scc[scc_index].scc_psmr = SCC_PSMR_ENCRC |
SCC_PSMR_NIB22 | SCC_PSMR_LPB;
-#if 0
- /*
- * Configure Ethernet TENA Signal
- */
-
-#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
- immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
- immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
-#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
- immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
- immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
-#else
-#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
-#endif
-
-#if defined(CONFIG_ADS) && defined(CONFIG_MPC860)
- /*
- * Port C is used to control the PHY,MC68160.
- */
- immr->im_ioport.iop_pcdir |=
- (PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL);
-
- immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL;
- immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL);
- *((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#endif /* MPC860ADS */
-
-#if defined(CONFIG_AMX860)
- /*
- * Port B is used to control the PHY,MC68160.
- */
- immr->im_cpm.cp_pbdir |=
- (PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
-
- immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
- immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
-
- immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
- immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
-#endif /* AMX860 */
-
-#endif /* 0 */
-
#ifdef CONFIG_RPXCLASSIC
*((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
*((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
@@ -449,7 +406,7 @@
*/
#if defined (CONFIG_FADS)
udelay (10000); /* wait 10 ms */
-#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
+#elif defined(CONFIG_RPXCLASSIC)
udelay (100000); /* wait 100 ms */
#endif
}