rockchip: rk3128: add soc basic support
RK3128 is a SoC from Rockchip with quad-core Cortex-A7 CPU
and mali400 GPU. Support Nand flash, eMMC, SD card, USB 2.0 host
and device, HDMI/LVDS/MIPI display.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
diff --git a/arch/arm/mach-rockchip/rk3128-board.c b/arch/arm/mach-rockchip/rk3128-board.c
new file mode 100644
index 0000000..2e8393d
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3128-board.c
@@ -0,0 +1,127 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <ram.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/grf_rk3128.h>
+#include <asm/arch/boot_mode.h>
+#include <asm/arch/timer.h>
+#include <power/regulator.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+__weak int rk_board_late_init(void)
+{
+ return 0;
+}
+
+int board_late_init(void)
+{
+ setup_boot_mode();
+
+ return rk_board_late_init();
+}
+
+int board_init(void)
+{
+ int ret = 0;
+
+ rockchip_timer_init();
+
+ ret = regulators_enable_boot_on(false);
+ if (ret) {
+ debug("%s: Cannot enable boot on regulator\n", __func__);
+ return ret;
+ }
+
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_dram[0].size = 0x8400000;
+ /* Reserve 0xe00000(14MB) for OPTEE with TA enabled, otherwise 2MB */
+ gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE
+ + gd->bd->bi_dram[0].size + 0xe00000;
+ gd->bd->bi_dram[1].size = gd->bd->bi_dram[0].start
+ + gd->ram_size - gd->bd->bi_dram[1].start;
+
+ return 0;
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif
+
+#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
+#include <usb.h>
+#include <usb/dwc2_udc.h>
+
+static struct dwc2_plat_otg_data rk3128_otg_data = {
+ .rx_fifo_sz = 512,
+ .np_tx_fifo_sz = 16,
+ .tx_fifo_sz = 128,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ int node;
+ const char *mode;
+ bool matched = false;
+ const void *blob = gd->fdt_blob;
+
+ /* find the usb_otg node */
+ node = fdt_node_offset_by_compatible(blob, -1,
+ "rockchip,rk3128-usb");
+
+ while (node > 0) {
+ mode = fdt_getprop(blob, node, "dr_mode", NULL);
+ if (mode && strcmp(mode, "otg") == 0) {
+ matched = true;
+ break;
+ }
+
+ node = fdt_node_offset_by_compatible(blob, node,
+ "rockchip,rk3128-usb");
+ }
+ if (!matched) {
+ debug("Not found usb_otg device\n");
+ return -ENODEV;
+ }
+ rk3128_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
+
+ return dwc2_udc_probe(&rk3128_otg_data);
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_USB_FUNCTION_FASTBOOT)
+int fb_set_reboot_flag(void)
+{
+ struct rk3128_grf *grf;
+
+ printf("Setting reboot to fastboot flag ...\n");
+ grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+ /* Set boot mode to fastboot */
+ writel(BOOT_FASTBOOT, &grf->os_reg[0]);
+
+ return 0;
+}
+#endif