mtd: Make CONFIG_MTD be the gate symbol for the menu
The help for CONFIG_MTD explains that it needs to be enabled for various
things like NAND, etc to be available. It however then doesn't enforce
this dependency and so if you have none of these systems present you
still need to disable a number of options. Fix this by making places
that select/imply one type of flash, but did not do the same, also do
this for "MTD". Make boards which hadn't been enabling MTD already but
need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it
wasn't previously enabled but was now being implied.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index efb7053..abd7c6c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -614,6 +614,7 @@
select DM_SPI
select DM_SPI_FLASH
select GPIO_EXTRA_HEADER
+ select MTD
select SPL_DM_SPI if SPL
select SPL_DM_SPI_FLASH if SPL
select SPL_TIMER if SPL
@@ -639,6 +640,7 @@
select DM_SPI_FLASH
select GPIO_EXTRA_HEADER
select PL01X_SERIAL
+ select MTD
select SPI
select SPI_FLASH
imply CMD_DM
@@ -724,6 +726,7 @@
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
+ select MTD
select SPI
select GPIO_EXTRA_HEADER
imply SYS_THUMB_BUILD
@@ -1008,6 +1011,7 @@
select VIDEO
select IOMMU
select LINUX_KERNEL_IMAGE_HEADER
+ select MTD
select OF_BOARD_SETUP
select OF_CONTROL
select PCI
@@ -1120,6 +1124,7 @@
imply DM_SPI
imply DM_SPI_FLASH
imply FAT_WRITE
+ imply MTD
imply SPL
imply SPL_DM
imply SPL_DM_SPI
@@ -1143,7 +1148,7 @@
select DM_GPIO
select DM_I2C if I2C
select DM_SPI if SPI
- select DM_SPI_FLASH if SPI
+ select DM_SPI_FLASH if SPI && MTD
select DM_KEYBOARD
select DM_MMC if MMC
select DM_SERIAL
@@ -1261,6 +1266,7 @@
select DM_SPI
select DM_SPI_FLASH
select OF_CONTROL
+ select MTD
select SPI
select SPL_BOARD_INIT if SPL
select SPL_CLK if SPL
@@ -1299,6 +1305,7 @@
imply DM_MAILBOX
select DM_MMC if MMC
select DM_SERIAL
+ select MTD
select DM_SPI if SPI
select DM_SPI_FLASH if DM_SPI
imply FIRMWARE
@@ -1845,6 +1852,7 @@
select DM_GPIO
select DM_I2C
select DM_MMC
+ select MTD
select DM_SPI_FLASH
select DM_MDIO
select PCI
@@ -1989,6 +1997,7 @@
select DM_USB_GADGET if USB_DWC3_GADGET
select ENABLE_ARM_SOC_BOOT0_HOOK
select OF_CONTROL
+ select MTD
select SPI
select SPL_DM if SPL
select SPL_DM_SPI if SPL
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 37ef2d6..c5fd869 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -88,6 +88,7 @@
select DM_GPIO
select DM_SERIAL
select DM_SPI
+ select MTD
select SPI
imply CMD_DM
@@ -294,6 +295,7 @@
select DM_GPIO
select DM_SERIAL
select DM_SPI
+ select MTD
select SPI
select SUPPORT_SPL
imply CMD_DM
@@ -312,6 +314,7 @@
bool "Support VINCO"
select DM
select DM_SPI
+ select MTD
select SAMA5D4
select SPI
select SUPPORT_SPL
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 50a9c3e..114cce4 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -201,6 +201,7 @@
select DM_SPI
select DM_GPIO
select DM_SERIAL
+ select MTD
select SUPPORT_SPL
imply CMD_DM
@@ -261,6 +262,7 @@
select DM_SERIAL
select DM_I2C
select DM_SPI
+ select MTD
imply CMD_DM
config TARGET_MX6CUBOXI
@@ -602,6 +604,7 @@
imply DM
imply DM_GPIO
imply DM_MMC
+ imply MTD
imply DM_SPI
imply DM_SPI_FLASH
imply DM_I2C
diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig
index bd5129b..46abf07 100644
--- a/arch/arm/mach-omap2/am33xx/Kconfig
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
@@ -204,6 +204,7 @@
imply DM_I2C
imply DM_SPI
imply DM_SPI_FLASH
+ imply MTD
imply SPL_ENV_SUPPORT
imply SPL_FS_EXT4
imply SPL_FS_FAT
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index c8907bc..05e194d 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -55,6 +55,7 @@
select DM_SPI
select DM_SPI_FLASH
select MISC
+ select MTD
select OF_CONTROL
select SPI
select SYSRESET