* Patch by Rune Torgersen, 13 Feb 2003:
Add support for Motorola MPC8266ADS board
* Patch by Kyle Harris, 19 Feb 2003:
patches for the Intel lubbock board:
memsetup.S - general cleanup (based on Robert's csb226 code)
flash.c - overhaul, actually works now
lubbock.c - fix init funcs to return proper value
* Patch by Kenneth Johansson, 26 Feb 2003:
- Fixed off by one in RFTA calculation.
- No need to abort when LDF is lower than we can program it's only
minimum timing so clamp it to what we can do.
- Takes function pointer to function for reading the spd_nvram. Usefull
for faking data or hardcode a module without the nvram.
- fix other user for above change
- fix some comments.
* Patches by Brian Waite, 26 Feb 2003:
- fix port for evb64260 board
- fix PCI for evb64260 board
- fix PCI scan
* Patch by Reinhard Meyer, 1 Mar 2003:
Add support for EMK TOP860 Module
* Patch by Yuli Barcohen, 02 Mar 2003:
Add SPD EEPROM support for MPC8260ADS board
diff --git a/board/mpc8266ads/flash.c b/board/mpc8266ads/flash.c
new file mode 100644
index 0000000..5ec6e33
--- /dev/null
+++ b/board/mpc8266ads/flash.c
@@ -0,0 +1,509 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
+ * Add support the Sharp chips on the mpc8260ads.
+ * I started with board/ip860/flash.c and made changes I found in
+ * the MTD project by David Schleef.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int clear_block_lock_bit(vu_long * addr);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+#ifndef CONFIG_MPC8260ADS
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE;
+#endif
+ unsigned long size;
+ int i;
+
+ /* Init: enable write,
+ * or we cannot even write flash commands
+ */
+#ifndef CONFIG_MPC8260ADS
+ bcsr->bd_ctrl |= BD_CTRL_FLWE;
+#endif
+
+
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+
+ /* set the default sector offset */
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size = flash_get_size((vu_long *)FLASH_BASE, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size, size<<20);
+ }
+
+#ifndef CONFIG_MPC8260ADS
+ /* Remap FLASH according to real size */
+ memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+ memctl->memc_br1 = (CFG_FLASH_BASE & BR_BA_MSK) |
+ (memctl->memc_br1 & ~(BR_BA_MSK));
+#endif
+ /* Re-do sizing to get full correct info */
+ size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_info[0].size = size;
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[0]);
+#endif
+ return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL: printf ("Intel "); break;
+ case FLASH_MAN_SHARP: printf ("Sharp "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F016SV: printf ("28F016SV (16 Mbit, 32 x 64k)\n");
+ break;
+ case FLASH_28F160S3: printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
+ break;
+ case FLASH_28F320S3: printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
+ break;
+ case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ ulong value;
+ ulong base = (ulong)addr;
+ ulong sector_offset;
+
+ /* Write "Intelligent Identifier" command: read Manufacturer ID */
+ *addr = 0x90909090;
+
+ value = addr[0] & 0x00FF00FF;
+ switch (value) {
+ case MT_MANUFACT: /* SHARP, MT or => Intel */
+ case INTEL_ALT_MANU:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ printf("unknown manufacturer: %x\n", (unsigned int)value);
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+ case (INTEL_ID_28F016S):
+ info->flash_id += FLASH_28F016SV;
+ info->sector_count = 32;
+ info->size = 0x00400000;
+ sector_offset = 0x20000;
+ break; /* => 2x2 MB */
+
+ case (INTEL_ID_28F160S3):
+ info->flash_id += FLASH_28F160S3;
+ info->sector_count = 32;
+ info->size = 0x00400000;
+ sector_offset = 0x20000;
+ break; /* => 2x2 MB */
+
+ case (INTEL_ID_28F320S3):
+ info->flash_id += FLASH_28F320S3;
+ info->sector_count = 64;
+ info->size = 0x00800000;
+ sector_offset = 0x20000;
+ break; /* => 2x4 MB */
+
+ case SHARP_ID_28F016SCL:
+ case SHARP_ID_28F016SCZ:
+ info->flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
+ info->sector_count = 32;
+ info->size = 0x00800000;
+ sector_offset = 0x40000;
+ break; /* => 4x2 MB */
+
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table */
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base;
+ base += sector_offset;
+ /* don't know how to check sector protection */
+ info->protect[i] = 0;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (vu_long *)info->start[0];
+
+ *addr = 0xFFFFFF; /* reset bank to read array mode */
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ( ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
+ && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ /* Make Sure Block Lock Bit is not set. */
+ if(clear_block_lock_bit((vu_long *)(info->start[s_first]))){
+ return 1;
+ }
+
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_long *addr = (vu_long *)(info->start[sect]);
+
+ last = start = get_timer (0);
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Reset Array */
+ *addr = 0xffffffff;
+ /* Clear Status Register */
+ *addr = 0x50505050;
+ /* Single Block Erase Command */
+ *addr = 0x20202020;
+ /* Confirm */
+ *addr = 0xD0D0D0D0;
+
+ if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
+ /* Resume Command, as per errata update */
+ *addr = 0xD0D0D0D0;
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+ while ((*addr & 0x80808080) != 0x80808080) {
+ if(*addr & 0x20202020){
+ printf("Error in Block Erase - Lock Bit may be set!\n");
+ printf("Status Register = 0x%X\n", (uint)*addr);
+ *addr = 0xFFFFFFFF; /* reset bank */
+ return 1;
+ }
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = 0xFFFFFFFF; /* reset bank */
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+ /* reset to read mode */
+ *addr = 0xFFFFFFFF;
+ }
+ }
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long *)dest;
+ ulong start, csr;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Write Command */
+ *addr = 0x10101010;
+
+ /* Write Data */
+ *addr = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ flag = 0;
+ while (((csr = *addr) & 0x80808080) != 0x80808080) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ flag = 1;
+ break;
+ }
+ }
+ if (csr & 0x40404040) {
+ printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
+ flag = 1;
+ }
+
+ /* Clear Status Registers Command */
+ *addr = 0x50505050;
+ /* Reset to read array mode */
+ *addr = 0xFFFFFFFF;
+
+ return (flag);
+}
+
+/*-----------------------------------------------------------------------
+ * Clear Block Lock Bit, returns:
+ * 0 - OK
+ * 1 - Timeout
+ */
+
+static int clear_block_lock_bit(vu_long * addr)
+{
+ ulong start, now;
+
+ /* Reset Array */
+ *addr = 0xffffffff;
+ /* Clear Status Register */
+ *addr = 0x50505050;
+
+ *addr = 0x60606060;
+ *addr = 0xd0d0d0d0;
+
+ start = get_timer (0);
+ while(*addr != 0x80808080){
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout on clearing Block Lock Bit\n");
+ *addr = 0xFFFFFFFF; /* reset bank */
+ return 1;
+ }
+ }
+ return 0;
+}