powerpc: updates for the keymile boards
- CONFIG_SYS_MAX_I2C_BUS changed to 1
We use only one I2C hardwarecontroller on this boards, so
change the CONFIG_SYS_MAX_I2C_BUS to 1.
- common: dont print errormsg if second IVM Block lacks.
- 82xx, mgcoge: fix double mtdpart entry in environment
- 82xx, mgcoge: activate on second Flash the second bank.
- common: CONFIG_ENV_SIZE 0x4000 for all keymile boards
- common: Change malloc size to 1MByte for all Keymile boards
We need a bigger malloc area for the environment support (128k)
on some Keymile boards (kmeter1) and the upcoming UBI support.
Change it to 1MB for all Keymile boards to be on the save side.
Also define CONFIG_SYS_64BIT_VSPRINTF which is needed for
UBI/UBIFS support.
- Add UBI support to all Keymile boards
- change manner of writing "/localbus/ranges" node
instead of writting the complete "/localbus/ranges" node
before booting Linux, only update the ranges entries
which gets dynamical detected (size of flashes).
This is needed, because keymile adds in the DTS
"/localbus/ranges" node entries, which u-boot must
not overwrite/delete.
- kmeter, mgcoge: define 2 seperate regions needed for the Intel P30 chips
The Intel P30 chip has 2 non-identical chips on
one die, so we need to define 2 seperate regions
that are scanned by physmap_of independantly.
- kmeter1: Add MTD concat support to Keymile boards
- 82xx, mgcoge: add "unlock=yes" to default environment
- added CONFIG_MTD_DEVICE to get in sync with mainline code
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
index 0fcf692..0cc1b3b 100644
--- a/include/configs/keymile-common.h
+++ b/include/configs/keymile-common.h
@@ -45,6 +45,7 @@
#define CONFIG_CMD_I2C
#define CONFIG_CMD_JFFS2
#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
@@ -97,7 +98,7 @@
#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */
#define CONFIG_I2C_MULTI_BUS 1
-#define CONFIG_SYS_MAX_I2C_BUS 2
+#define CONFIG_SYS_MAX_I2C_BUS 1
#define CONFIG_SYS_I2C_INIT_BOARD 1
#define CONFIG_I2C_MUX 1
@@ -122,6 +123,20 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_ENV_SIZE 0x04000 /* Size of Environment */
+
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for UBI/UBIFS */
+
+/* UBI Support for all Keymile boards */
+#define CONFIG_CMD_UBI
+#define CONFIG_RBTREE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_CONCAT
+
/* define this to use the keymile's io muxing feature */
/*#define CONFIG_IO_MUXING */