edid: Set timings flags according to edid
Timing flags are never set, so they may contain garbage. Since some
drivers check them, video output may be broken on those drivers.
Initialize them to 0 and check for few common flags.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/common/edid.c b/common/edid.c
index e08e420..ab7069f 100644
--- a/common/edid.c
+++ b/common/edid.c
@@ -85,6 +85,7 @@
uint x_mm, y_mm;
unsigned int ha, hbl, hso, hspw, hborder;
unsigned int va, vbl, vso, vspw, vborder;
+ struct edid_detailed_timing *t = (struct edid_detailed_timing *)buf;
/* Edid contains pixel clock in terms of 10KHz */
set_entry(&timing->pixelclock, (buf[0] + (buf[1] << 8)) * 10000);
@@ -111,6 +112,19 @@
set_entry(&timing->vback_porch, vbl - vso - vspw);
set_entry(&timing->vsync_len, vspw);
+ timing->flags = 0;
+ if (EDID_DETAILED_TIMING_FLAG_HSYNC_POLARITY(*t))
+ timing->flags |= DISPLAY_FLAGS_HSYNC_HIGH;
+ else
+ timing->flags |= DISPLAY_FLAGS_HSYNC_LOW;
+ if (EDID_DETAILED_TIMING_FLAG_VSYNC_POLARITY(*t))
+ timing->flags |= DISPLAY_FLAGS_VSYNC_HIGH;
+ else
+ timing->flags |= DISPLAY_FLAGS_VSYNC_LOW;
+
+ if (EDID_DETAILED_TIMING_FLAG_INTERLACED(*t))
+ timing->flags = DISPLAY_FLAGS_INTERLACED;
+
debug("Detailed mode clock %u Hz, %d mm x %d mm\n"
" %04x %04x %04x %04x hborder %x\n"
" %04x %04x %04x %04x vborder %x\n",