ls102xa: dcu: Add platform support for DCU on LS1021AQDS board
This patch adds the CH7301 HDMI options and the common configuration
for DCU on LS1021AQDS board.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Cc: Jason Jin <Jason.Jin@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
diff --git a/board/freescale/ls1021aqds/Makefile b/board/freescale/ls1021aqds/Makefile
index 3b6903c..ab02344 100644
--- a/board/freescale/ls1021aqds/Makefile
+++ b/board/freescale/ls1021aqds/Makefile
@@ -7,3 +7,4 @@
obj-y += ls1021aqds.o
obj-y += ddr.o
obj-y += eth.o
+obj-$(CONFIG_FSL_DCU_FB) += dcu.o
diff --git a/board/freescale/ls1021aqds/dcu.c b/board/freescale/ls1021aqds/dcu.c
new file mode 100644
index 0000000..90f5bc0
--- /dev/null
+++ b/board/freescale/ls1021aqds/dcu.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * FSL DCU Framebuffer driver
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <common.h>
+#include <fsl_dcu_fb.h>
+#include <i2c.h>
+#include "div64.h"
+#include "../common/diu_ch7301.h"
+#include "ls1021aqds_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int select_i2c_ch_pca9547(u8 ch)
+{
+ int ret;
+
+ ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+ if (ret) {
+ puts("PCA: failed to select proper channel\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+unsigned int dcu_set_pixel_clock(unsigned int pixclock)
+{
+ unsigned long long div;
+
+ div = (unsigned long long)(gd->bus_clk / 1000);
+ div *= (unsigned long long)pixclock;
+ do_div(div, 1000000000);
+
+ return div;
+}
+
+int platform_dcu_init(unsigned int xres, unsigned int yres,
+ const char *port,
+ struct fb_videomode *dcu_fb_videomode)
+{
+ const char *name;
+ unsigned int pixel_format;
+ int ret;
+ u8 ch;
+
+ /* Mux I2C3+I2C4 as HSYNC+VSYNC */
+ ret = i2c_read(CONFIG_SYS_I2C_QIXIS_ADDR, QIXIS_DCU_BRDCFG5,
+ 1, &ch, 1);
+ if (ret) {
+ printf("Error: failed to read I2C @%02x\n",
+ CONFIG_SYS_I2C_QIXIS_ADDR);
+ return ret;
+ }
+ ch &= 0x1F;
+ ch |= 0xA0;
+ ret = i2c_write(CONFIG_SYS_I2C_QIXIS_ADDR, QIXIS_DCU_BRDCFG5,
+ 1, &ch, 1);
+ if (ret) {
+ printf("Error: failed to write I2C @%02x\n",
+ CONFIG_SYS_I2C_QIXIS_ADDR);
+ return ret;
+ }
+
+ if (strncmp(port, "hdmi", 4) == 0) {
+ unsigned long pixval;
+
+ name = "HDMI";
+
+ pixval = 1000000000 / dcu_fb_videomode->pixclock;
+ pixval *= 1000;
+
+ i2c_set_bus_num(CONFIG_SYS_I2C_DVI_BUS_NUM);
+ select_i2c_ch_pca9547(I2C_MUX_CH_CH7301);
+ diu_set_dvi_encoder(pixval);
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ } else {
+ return 0;
+ }
+
+ printf("DCU: Switching to %s monitor @ %ux%u\n", name, xres, yres);
+
+ pixel_format = 32;
+ fsl_dcu_init(xres, yres, pixel_format);
+
+ return 0;
+}
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index 0a3252e..691e993 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -193,6 +193,10 @@
out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
#endif
+#ifdef CONFIG_FSL_DCU_FB
+ out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
+#endif
+
/* Workaround for the issue that DDR could not respond to
* barrier transaction which is generated by executing DSB/ISB
* instruction. Set CCI-400 control override register to
diff --git a/board/freescale/ls1021aqds/ls1021aqds_qixis.h b/board/freescale/ls1021aqds/ls1021aqds_qixis.h
index 09b3be2..8e482eb 100644
--- a/board/freescale/ls1021aqds/ls1021aqds_qixis.h
+++ b/board/freescale/ls1021aqds/ls1021aqds_qixis.h
@@ -32,4 +32,6 @@
#define QIXIS_SRDS1CLK_100 0x0
+#define QIXIS_DCU_BRDCFG5 0x55
+
#endif
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 8dc04f2..8b757da 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -385,6 +385,7 @@
*/
#define I2C_MUX_PCA_ADDR_PRI 0x77
#define I2C_MUX_CH_DEFAULT 0x8
+#define I2C_MUX_CH_CH7301 0xC
/*
* MMC
@@ -427,6 +428,25 @@
#endif
/*
+ * Video
+ */
+#define CONFIG_FSL_DCU_FB
+
+#ifdef CONFIG_FSL_DCU_FB
+#define CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+
+#define CONFIG_FSL_DIU_CH7301
+#define CONFIG_SYS_I2C_DVI_BUS_NUM 0
+#define CONFIG_SYS_I2C_QIXIS_ADDR 0x66
+#define CONFIG_SYS_I2C_DVI_ADDR 0x75
+#endif
+
+/*
* eTSEC
*/
#define CONFIG_TSEC_ENET