PXA: Drop csb226 and innokom boards (unmaintained)

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Robert Schwebel <robert@schwebel.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
diff --git a/MAINTAINERS b/MAINTAINERS
index db1610b..bf4c7e9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -817,11 +817,6 @@
 	magnesium	i.MX27
 	mgcoge3un	ARM926EJS (Kirkwood SoC)
 
-Robert Schwebel <r.schwebel@pengutronix.de>
-
-	csb226		xscale/pxa
-	innokom		xscale/pxa
-
 Michael Schwingen <michael@schwingen.org>
 
 	actux1		xscale/ixp
diff --git a/board/csb226/Makefile b/board/csb226/Makefile
deleted file mode 100644
index 6fe9bec..0000000
--- a/board/csb226/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= csb226.o flash.o
-
-SRCS	:= $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c
deleted file mode 100644
index dd29e62..0000000
--- a/board/csb226/csb226.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * (C) Copyright 2002
- * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de
- * Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net
- * Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
-/**
- * misc_init_r: - misc initialisation routines
- */
-
-int misc_init_r(void)
-{
-#if 0
-	uchar *str;
-
-	/* determine if the software update key is pressed during startup */
-	/* not ported yet... */
-	if (GPLR0 & 0x00000800) {
-		printf("using bootcmd_normal (sw-update button not pressed)\n");
-		str = getenv("bootcmd_normal");
-	} else {
-		printf("using bootcmd_update (sw-update button pressed)\n");
-		str = getenv("bootcmd_update");
-	}
-
-	setenv("bootcmd",str);
-#endif
-	return 0;
-}
-
-
-/**
- * board_init: - setup some data structures
- *
- * @return: 0 in case of success
- */
-
-int board_init (void)
-{
-	/* We have RAM, disable cache */
-	dcache_disable();
-	icache_disable();
-
-	/* arch number of CSB226 board */
-	gd->bd->bi_arch_number = MACH_TYPE_CSB226;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa0000100;
-
-	return 0;
-}
-
-
-extern void pxa_dram_init(void);
-int dram_init(void)
-{
-	pxa_dram_init();
-	gd->ram_size = PHYS_SDRAM_1_SIZE;
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-/**
- * csb226_set_led: - switch LEDs on or off
- *
- * @param led:   LED to switch (0,1,2)
- * @param state: switch on (1) or off (0)
- */
-
-void csb226_set_led(int led, int state)
-{
-	switch(led) {
-
-		case 0: if (state==1) {
-				writel(readl(GPCR0) | CSB226_USER_LED0, GPCR0);
-			} else if (state==0) {
-				writel(readl(GPSR0) | CSB226_USER_LED0, GPSR0);
-			}
-			break;
-
-		case 1: if (state==1) {
-				writel(readl(GPCR0) | CSB226_USER_LED1, GPCR0);
-			} else if (state==0) {
-				writel(readl(GPSR0) | CSB226_USER_LED1, GPSR0);
-			}
-			break;
-
-		case 2: if (state==1) {
-				writel(readl(GPCR0) | CSB226_USER_LED2, GPCR0);
-			} else if (state==0) {
-				writel(readl(GPSR0) | CSB226_USER_LED2, GPSR0);
-			}
-			break;
-	}
-
-	return;
-}
-
-
-/**
- * show_boot_progress: - indicate state of the boot process
- *
- * @param status: Status number - see README for details.
- *
- * The CSB226 does only have 3 LEDs, so we switch them on at the most
- * important states (1, 5, 15).
- */
-
-void show_boot_progress (int status)
-{
-	switch(status) {
-		case  1: csb226_set_led(0,1); break;
-		case  5: csb226_set_led(1,1); break;
-		case 15: csb226_set_led(2,1); break;
-	}
-
-	return;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_CS8900
-	rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/board/csb226/flash.c b/board/csb226/flash.c
deleted file mode 100644
index e103470..0000000
--- a/board/csb226/flash.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
- *
- * (C) Copyright 2003 (2 x 16 bit Flash bank patches)
- * Rolf Peukert, IMMS gGmbH, <rolf.peukert@imms.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/pxa-regs.h>
-
-#define FLASH_BANK_SIZE 0x02000000
-#define MAIN_SECT_SIZE	0x40000		/* 2x16 = 256k per sector */
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-/**
- * flash_init: - initialize data structures for flash chips
- *
- * @return: size of the flash
- */
-
-ulong flash_init(void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-		flash_info[i].flash_id =
-			(INTEL_MANUFACT & FLASH_VENDMASK) |
-			(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
-		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-		memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-
-		switch (i) {
-		case 0:
-			flashbase = PHYS_FLASH_1;
-			break;
-		default:
-			panic("configured too many flash banks!\n");
-			break;
-		}
-		for (j = 0; j < flash_info[i].sector_count; j++) {
-			flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect monitor and environment sectors */
-	flash_protect(FLAG_PROTECT_SET,
-			CONFIG_SYS_FLASH_BASE,
-			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
-			&flash_info[0]);
-
-	flash_protect(FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR,
-			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-			&flash_info[0]);
-
-	return size;
-}
-
-
-/**
- * flash_print_info: - print information about the flash situation
- */
-
-void flash_print_info  (flash_info_t *info)
-{
-	int i, j;
-
-	for (j=0; j<CONFIG_SYS_MAX_FLASH_BANKS; j++) {
-
-		switch (info->flash_id & FLASH_VENDMASK) {
-		case (INTEL_MANUFACT & FLASH_VENDMASK):
-			printf ("Intel: ");
-			break;
-		default:
-			printf ("Unknown Vendor ");
-			break;
-		}
-
-		switch (info->flash_id & FLASH_TYPEMASK) {
-		case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
-			printf("28F128J3 (128Mbit)\n");
-			break;
-		default:
-			printf("Unknown Chip Type\n");
-			return;
-		}
-
-		printf("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-		printf("  Sector Start Addresses:");
-		for (i = 0; i < info->sector_count; i++) {
-			if ((i % 5) == 0) printf ("\n	");
-
-			printf (" %08lX%s", info->start[i],
-				info->protect[i] ? " (RO)" : "	   ");
-		}
-		printf ("\n");
-		info++;
-	}
-}
-
-
-/**
- * flash_erase: - erase flash sectors
- */
-
-int flash_erase(flash_info_t *info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	int rc = ERR_OK;
-	ulong start;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return ERR_UNKNOWN_FLASH_TYPE;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		return ERR_INVAL;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
-		return ERR_UNKNOWN_FLASH_VENDOR;
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) prot++;
-	}
-
-	if (prot) return ERR_PROTECTED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-
-	flag = disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
-
-		printf("Erasing sector %2d ... ", sect);
-
-		/* arm simple, non interrupt dependent timer */
-		start = get_timer(0);
-
-		if (info->protect[sect] == 0) { /* not protected */
-			u32 * volatile addr = (u32 * volatile)(info->start[sect]);
-
-			/* erase sector:				    */
-			/* The strata flashs are aligned side by side on    */
-			/* the data bus, so we have to write the commands   */
-			/* to both chips here:				    */
-
-			*addr = 0x00200020;	/* erase setup */
-			*addr = 0x00D000D0;	/* erase confirm */
-
-			while ((*addr & 0x00800080) != 0x00800080) {
-				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					*addr = 0x00B000B0; /* suspend erase*/
-					*addr = 0x00FF00FF; /* read mode    */
-					rc = ERR_TIMOUT;
-					goto outahere;
-				}
-			}
-			*addr = 0x00500050; /* clear status register cmd.   */
-			*addr = 0x00FF00FF; /* reset to read mode	    */
-		}
-		printf("ok.\n");
-	}
-	if (ctrlc()) printf("User Interrupt!\n");
-
-outahere:
-	/* allow flash to settle - wait 10 ms */
-	udelay_masked(10000);
-
-	if (flag) enable_interrupts();
-
-	return rc;
-}
-
-/**
- * write_long: - copy memory to flash, assume a bank of 2 devices with 16bit each
- */
-
-static int write_long (flash_info_t *info, ulong dest, ulong data)
-{
-	u32 * volatile addr = (u32 * volatile)dest, val;
-	int rc = ERR_OK;
-	int flag;
-	ulong start;
-
-	/* read array command - just for the case... */
-	*addr = 0x00FF00FF;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) return ERR_NOT_ERASED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-	flag = disable_interrupts();
-
-	/* clear status register command */
-	*addr = 0x00500050;
-
-	/* program set-up command */
-	*addr = 0x00400040;
-
-	/* latch address/data */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while(((val = *addr) & 0x00800080) != 0x00800080) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			rc = ERR_TIMOUT;
-			/* suspend program command */
-			*addr = 0x00B000B0;
-			goto outahere;
-		}
-	}
-
-	/* check for errors */
-	if(val & 0x001A001A) {
-		printf("\nFlash write error %02x at address %08lx\n",
-			(int)val, (unsigned long)dest);
-		if(val & 0x00080008) {
-			printf("Voltage range error.\n");
-			rc = ERR_PROG_ERROR;
-			goto outahere;
-		}
-		if(val & 0x00020002) {
-			printf("Device protect error.\n");
-			rc = ERR_PROTECTED;
-			goto outahere;
-		}
-		if(val & 0x00100010) {
-			printf("Programming error.\n");
-			rc = ERR_PROG_ERROR;
-			goto outahere;
-		}
-		rc = ERR_PROG_ERROR;
-		goto outahere;
-	}
-
-outahere:
-	/* read array command */
-	*addr = 0x00FF00FF;
-	if (flag) enable_interrupts();
-
-	return rc;
-}
-
-
-/**
- * write_buf: - Copy memory to flash.
- *
- * @param info:
- * @param src:	source of copy transaction
- * @param addr: where to copy to
- * @param cnt:	number of bytes to copy
- *
- * @return	error code
- */
-
-/* "long" version, uses 32bit words */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	ulong data;
-	int l;
-	int i, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *)cp << 24);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data >> 8) | (*src++ << 24);
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *)cp << 24);
-		}
-
-		if ((rc = write_long(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = *((ulong*)src);
-		if ((rc = write_long(info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 4;
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) return ERR_OK;
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data >> 8) | (*src++ << 24);
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data >> 8) | (*(uchar *)cp << 24);
-	}
-
-	return write_long(info, wp, data);
-}
diff --git a/board/innokom/Makefile b/board/innokom/Makefile
deleted file mode 100644
index 8b58b7f..0000000
--- a/board/innokom/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= innokom.o flash.o
-
-SRCS	:= $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/innokom/flash.c b/board/innokom/flash.c
deleted file mode 100644
index ed4b987..0000000
--- a/board/innokom/flash.c
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
- *
- * (C) Copyright 2002
- * Auerswald GmbH & Co KG, Germany
- * Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/pxa-regs.h>
-
-/* Debugging macros ------------------------------------------------------  */
-
-#undef FLASH_DEBUG
-
-/* Some debug macros */
-#if (FLASH_DEBUG > 2 )
-#define PRINTK3(args...) printf(args)
-#else
-#define PRINTK3(args...)
-#endif
-
-#if FLASH_DEBUG > 1
-#define PRINTK2(args...) printf(args)
-#else
-#define PRINTK2(args...)
-#endif
-
-#ifdef FLASH_DEBUG
-#define PRINTK(args...) printf(args)
-#else
-#define PRINTK(args...)
-#endif
-
-/* ------------------------------------------------------------------------ */
-
-/* Development system: we have only 16 MB Flash                             */
-#ifdef CONFIG_MTD_INNOKOM_16MB
-#define FLASH_BANK_SIZE 0x01000000	/* 16 MB (during development)       */
-#define MAIN_SECT_SIZE  0x00020000	/* 128k per sector                  */
-#endif
-
-/* Production system: we have 64 MB Flash                                   */
-#ifdef CONFIG_MTD_INNOKOM_64MB
-#define FLASH_BANK_SIZE 0x04000000	/* 64 MB                            */
-#define MAIN_SECT_SIZE  0x00020000	/* 128k per sector                  */
-#endif
-
-flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/**
- * flash_init: - initialize data structures for flash chips
- *
- * @return: size of the flash
- */
-
-ulong flash_init(void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-		flash_info[i].flash_id =
-			(INTEL_MANUFACT & FLASH_VENDMASK) |
-			(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
-		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-		memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-
-		switch (i) {
-			case 0:
-				flashbase = PHYS_FLASH_1;
-				break;
-			default:
-				panic("configured too many flash banks!\n");
-				break;
-		}
-		for (j = 0; j < flash_info[i].sector_count; j++) {
-			flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect u-boot sectors */
-	flash_protect(FLAG_PROTECT_SET,
-			CONFIG_SYS_FLASH_BASE,
-			CONFIG_SYS_FLASH_BASE + (256*1024) - 1,
-			&flash_info[0]);
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-	flash_protect(FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR,
-			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-			&flash_info[0]);
-#endif
-
-	return size;
-}
-
-
-/**
- * flash_print_info: - print information about the flash situation
- *
- * @param info:
- */
-
-void flash_print_info  (flash_info_t *info)
-{
-	int i, j;
-
-	for (j=0; j<CONFIG_SYS_MAX_FLASH_BANKS; j++) {
-
-		switch (info->flash_id & FLASH_VENDMASK) {
-
-			case (INTEL_MANUFACT & FLASH_VENDMASK):
-				printf("Intel: ");
-				break;
-			default:
-				printf("Unknown Vendor ");
-				break;
-		}
-
-		switch (info->flash_id & FLASH_TYPEMASK) {
-
-			case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
-				printf("28F128J3 (128Mbit)\n");
-				break;
-			default:
-				printf("Unknown Chip Type\n");
-				return;
-		}
-
-		printf("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-		printf("  Sector Start Addresses:");
-		for (i = 0; i < info->sector_count; i++) {
-			if ((i % 5) == 0) printf ("\n   ");
-
-			printf (" %08lX%s", info->start[i],
-				info->protect[i] ? " (RO)" : "     ");
-		}
-		printf ("\n");
-		info++;
-	}
-}
-
-
-/**
- * flash_erase: - erase flash sectors
- *
- */
-
-int flash_erase(flash_info_t *info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	int rc = ERR_OK;
-	ulong start;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return ERR_UNKNOWN_FLASH_TYPE;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		return ERR_INVAL;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
-		return ERR_UNKNOWN_FLASH_VENDOR;
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) prot++;
-	}
-
-	if (prot) return ERR_PROTECTED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-
-	flag = disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
-
-		printf("Erasing sector %2d ... ", sect);
-
-		PRINTK("\n");
-
-		/* arm simple, non interrupt dependent timer */
-		start = get_timer(0);
-
-		if (info->protect[sect] == 0) {	/* not protected */
-			u16 * volatile addr = (u16 * volatile)(info->start[sect]);
-
-			PRINTK("unlocking sector\n");
-			*addr = 0x0060;
-			*addr = 0x00d0;
-			*addr = 0x00ff;
-
-			PRINTK("erasing sector\n");
-			*addr = 0x0020;
-			PRINTK("confirming erase\n");
-			*addr = 0x00D0;
-
-			while ((*addr & 0x0080) != 0x0080) {
-				PRINTK(".");
-				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					*addr = 0x00B0; /* suspend erase*/
-					*addr = 0x00FF; /* read mode    */
-					rc = ERR_TIMOUT;
-					goto outahere;
-				}
-			}
-
-			PRINTK("clearing status register\n");
-			*addr = 0x0050;
-			PRINTK("resetting to read mode");
-			*addr = 0x00FF;
-		}
-
-		printf("ok.\n");
-	}
-
-	if (ctrlc()) printf("User Interrupt!\n");
-
-	outahere:
-
-	/* allow flash to settle - wait 10 ms */
-	udelay_masked(10000);
-
-	if (flag) enable_interrupts();
-
-	return rc;
-}
-
-
-/**
- * write_word: - copy memory to flash
- *
- * @param info:
- * @param dest:
- * @param data:
- * @return:
- */
-
-static int write_word (flash_info_t *info, ulong dest, ushort data)
-{
-	volatile u16 *addr = (u16 *)dest, val;
-	int rc = ERR_OK;
-	int flag;
-	ulong start;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) return ERR_NOT_ERASED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-	flag = disable_interrupts();
-
-	/* clear status register command */
-	*addr = 0x50;
-
-	/* program set-up command */
-	*addr = 0x40;
-
-	/* latch address/data */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while(((val = *addr) & 0x80) != 0x80) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			rc = ERR_TIMOUT;
-			*addr = 0xB0; /* suspend program command */
-			goto outahere;
-		}
-	}
-
-	if(val & 0x1A) {	/* check for error */
-		printf("\nFlash write error %02x at address %08lx\n",
-			(int)val, (unsigned long)dest);
-		if(val & (1<<3)) {
-			printf("Voltage range error.\n");
-			rc = ERR_PROG_ERROR;
-			goto outahere;
-		}
-		if(val & (1<<1)) {
-			printf("Device protect error.\n");
-			rc = ERR_PROTECTED;
-			goto outahere;
-		}
-		if(val & (1<<4)) {
-			printf("Programming error.\n");
-			rc = ERR_PROG_ERROR;
-			goto outahere;
-		}
-		rc = ERR_PROG_ERROR;
-		goto outahere;
-	}
-
-	outahere:
-
-	*addr = 0xFF; /* read array command */
-	if (flag) enable_interrupts();
-
-	return rc;
-}
-
-
-/**
- * write_buf: - Copy memory to flash.
- *
- * @param info:
- * @param src:	source of copy transaction
- * @param addr:	where to copy to
- * @param cnt:	number of bytes to copy
- *
- * @return	error code
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	ushort data;
-	int l;
-	int i, rc;
-
-	wp = (addr & ~1);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *)cp << 8);
-		}
-		for (; i<2 && cnt>0; ++i) {
-			data = (data >> 8) | (*src++ << 8);
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<2; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *)cp << 8);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 2;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 2) {
-		/* data = *((vushort*)src); */
-		data = *((ushort*)src);
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 2;
-		wp  += 2;
-		cnt -= 2;
-	}
-
-	if (cnt == 0) return ERR_OK;
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
-		data = (data >> 8) | (*src++ << 8);
-		--cnt;
-	}
-	for (; i<2; ++i, ++cp) {
-		data = (data >> 8) | (*(uchar *)cp << 8);
-	}
-
-	return write_word(info, wp, data);
-}
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
deleted file mode 100644
index 22de7e3..0000000
--- a/board/innokom/innokom.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * (C) Copyright 2002
- * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de
- * Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net
- * Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/mach-types.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
-/**
- * i2c_init_board - reset i2c bus. When the board is powercycled during a
- * bus transfer it might hang; for details see doc/I2C_Edge_Conditions.
- * The Innokom board has GPIO70 connected to SCLK which can be toggled
- * until all chips think that their current cycles are finished.
- */
-int i2c_init_board(void)
-{
-	int i;
-
-	/* set gpio pin low _before_ we change direction to output          */
-	writel(GPIO_bit(70), GPCR(70));
-
-	/* now toggle between output=low and high-impedance                 */
-	for (i = 0; i < 20; i++) {
-		writel(readl(GPDR(70)) | GPIO_bit(70), GPDR(70));  /* output */
-		udelay(10);
-		writel(readl(GPDR(70)) & ~GPIO_bit(70), GPDR(70)); /* input  */
-		udelay(10);
-	}
-
-	return 0;
-}
-
-
-/**
- * misc_init_r: - misc initialisation routines
- */
-
-int misc_init_r(void)
-{
-	char *str;
-
-	/* determine if the software update key is pressed during startup   */
-	if (readl(GPLR0) & 0x00000800) {
-		printf("using bootcmd_normal (sw-update button not pressed)\n");
-		str = getenv("bootcmd_normal");
-	} else {
-		printf("using bootcmd_update (sw-update button pressed)\n");
-		str = getenv("bootcmd_update");
-	}
-
-	setenv("bootcmd",str);
-
-	return 0;
-}
-
-
-/**
- * board_init: - setup some data structures
- *
- * @return: 0 in case of success
- */
-
-int board_init (void)
-{
-	/* We have RAM, disable cache */
-	dcache_disable();
-	icache_disable();
-
-	gd->bd->bi_arch_number = MACH_TYPE_INNOKOM;
-	gd->bd->bi_boot_params = 0xa0000100;
-	gd->bd->bi_baudrate = CONFIG_BAUDRATE;
-
-	return 0;
-}
-
-extern void pxa_dram_init(void);
-int dram_init(void)
-{
-	pxa_dram_init();
-	gd->ram_size = PHYS_SDRAM_1_SIZE;
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-/**
- * innokom_set_led: - switch LEDs on or off
- *
- * @param led:   LED to switch (0,1,2)
- * @param state: switch on (1) or off (0)
- */
-
-void innokom_set_led(int led, int state)
-{
-	switch(led) {
-/*
-		case 0: if (state==1) {
-				GPCR0 |= CSB226_USER_LED0;
-			} else if (state==0) {
-				GPSR0 |= CSB226_USER_LED0;
-			}
-			break;
-
-		case 1: if (state==1) {
-				GPCR0 |= CSB226_USER_LED1;
-			} else if (state==0) {
-				GPSR0 |= CSB226_USER_LED1;
-			}
-			break;
-
-		case 2: if (state==1) {
-				GPCR0 |= CSB226_USER_LED2;
-			} else if (state==0) {
-				GPSR0 |= CSB226_USER_LED2;
-			}
-			break;
-*/
-	}
-
-	return;
-}
-
-
-/**
- * show_boot_progress: - indicate state of the boot process
- *
- * @param status: Status number - see README for details.
- *
- * The CSB226 does only have 3 LEDs, so we switch them on at the most
- * important states (1, 5, 15).
- */
-
-void show_boot_progress (int status)
-{
-	switch(status) {
-/*
-		case  1: csb226_set_led(0,1); break;
-		case  5: csb226_set_led(1,1); break;
-		case 15: csb226_set_led(2,1); break;
-*/
-	}
-
-	return;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC91111
-	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index bbf589e..498f4d7 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -216,8 +216,6 @@
 cerf250                      arm         pxa
 colibri_pxa270               arm         pxa
 cradle                       arm         pxa
-csb226                       arm         pxa
-innokom                      arm         pxa
 lubbock                      arm         pxa
 palmld                       arm         pxa
 palmtc                       arm         pxa
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
deleted file mode 100644
index 804469b..0000000
--- a/include/configs/csb226.h
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de.
- *
- * Configuration for the Cogent CSB226 board. For details see
- * http://www.cogcomp.com/csb_csb226.htm
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * include/configs/csb226.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define DEBUG 1
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_PXA250		1	/* This is an PXA250 CPU            */
-#define CONFIG_CSB226		1	/* on a CSB226 board                */
-
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff      */
-					/* for timer/console/ethernet       */
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-#define	CONFIG_SYS_TEXT_BASE	0x0
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART		1	/* we use FFUART on CSB226          */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE		19200
-#undef  CONFIG_MISC_INIT_R		/* not used yet                     */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_CACHE
-
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTARGS		"console=ttyS0,19200 ip=192.168.1.10,192.168.1.5,,255,255,255,0,csb root=/dev/nfs, ether=0,0x08000000,eth0"
-#define CONFIG_ETHADDR		FF:FF:FF:FF:FF:FF
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.1.56
-#define CONFIG_SERVERIP		192.168.1.5
-#define CONFIG_BOOTCOMMAND	"bootm 0x40000"
-#define CONFIG_SHOW_BOOT_PROGRESS
-
-#define CONFIG_CMDLINE_TAG	1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	19200		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-
-/*
- * Size of malloc() pool; this lives below the uppermost 128 KiB which are
- * used for the RAM copy of the uboot code
- *
- */
-#define CONFIG_SYS_MALLOC_LEN		(128*1024)
-
-#define CONFIG_SYS_LONGHELP				/* undef to save memory         */
-#define CONFIG_SYS_PROMPT		"uboot> "	/* Monitor Command Prompt       */
-#define CONFIG_SYS_CBSIZE		128		/* Console I/O Buffer Size      */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	0xa0400000      /* memtest works on     */
-#define CONFIG_SYS_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
-
-#define CONFIG_SYS_LOAD_ADDR           0xa3000000	/* default load address */
-						/* RS: where is this documented? */
-						/* RS: is this where U-Boot is  */
-						/* RS: relocated to in RAM?      */
-
-#define CONFIG_SYS_HZ			1000
-						/* RS: the oscillator is actually 3680130?? */
-#define CONFIG_SYS_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
-						/* 0101000001 */
-						/*      ^^^^^ Memory Speed 99.53 MHz         */
-						/*    ^^      Run Mode Speed = 2x Mem Speed  */
-						/* ^^         Turbo Mode Sp. = 1x Run M. Sp. */
-
-#define CONFIG_SYS_MONITOR_LEN		0x1c000		/* 112 KiB */
-
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Network chip
- */
-#define CONFIG_CS8900
-#define CONFIG_CS8900_BUS32
-#define CONFIG_CS8900_BASE	0x08000000
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
-#ifdef  CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM   */
-#define PHYS_SDRAM_1		0xa0000000	/* SDRAM Bank #1            */
-#define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB                    */
-
-#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1            */
-#define PHYS_FLASH_SIZE		0x02000000	/* 32 MB                    */
-
-#define CONFIG_SYS_DRAM_BASE		0xa0000000	/* RAM starts here          */
-#define CONFIG_SYS_DRAM_SIZE		0x02000000
-
-#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		(GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
-
-# if 0
-/* FIXME: switch to _documented_ registers */
-/*
- * GPIO settings
- *
- * GP15 == nCS1      is 1
- * GP24 == SFRM      is 1
- * GP25 == TXD       is 1
- * GP33 == nCS5      is 1
- * GP39 == FFTXD     is 1
- * GP41 == RTS       is 1
- * GP47 == TXD       is 1
- * GP49 == nPWE      is 1
- * GP62 == LED_B     is 1
- * GP63 == TDM_OE    is 1
- * GP78 == nCS2      is 1
- * GP79 == nCS3      is 1
- * GP80 == nCS4      is 1
- */
-#define CONFIG_SYS_GPSR0_VAL       0x03008000
-#define CONFIG_SYS_GPSR1_VAL       0xC0028282
-#define CONFIG_SYS_GPSR2_VAL       0x0001C000
-
-/* GP02 == DON_RST   is 0
- * GP23 == SCLK      is 0
- * GP45 == USB_ACT   is 0
- * GP60 == PLLEN     is 0
- * GP61 == LED_A     is 0
- * GP73 == SWUPD_LED is 0
- */
-#define CONFIG_SYS_GPCR0_VAL       0x00800004
-#define CONFIG_SYS_GPCR1_VAL       0x30002000
-#define CONFIG_SYS_GPCR2_VAL       0x00000100
-
-/* GP00 == DON_READY is input
- * GP01 == DON_OK    is input
- * GP02 == DON_RST   is output
- * GP03 == RESET_IND is input
- * GP07 == RES11     is input
- * GP09 == RES12     is input
- * GP11 == SWUPDATE  is input
- * GP14 == nPOWEROK  is input
- * GP15 == nCS1      is output
- * GP17 == RES22     is input
- * GP18 == RDY       is input
- * GP23 == SCLK      is output
- * GP24 == SFRM      is output
- * GP25 == TXD       is output
- * GP26 == RXD       is input
- * GP32 == RES21     is input
- * GP33 == nCS5      is output
- * GP34 == FFRXD     is input
- * GP35 == CTS       is input
- * GP39 == FFTXD     is output
- * GP41 == RTS       is output
- * GP42 == USB_OK    is input
- * GP45 == USB_ACT   is output
- * GP46 == RXD       is input
- * GP47 == TXD       is output
- * GP49 == nPWE      is output
- * GP58 == nCPUBUSINT is input
- * GP59 == LANINT    is input
- * GP60 == PLLEN     is output
- * GP61 == LED_A     is output
- * GP62 == LED_B     is output
- * GP63 == TDM_OE    is output
- * GP64 == nDSPINT   is input
- * GP65 == STRAP0    is input
- * GP67 == STRAP1    is input
- * GP69 == STRAP2    is input
- * GP70 == STRAP3    is input
- * GP71 == STRAP4    is input
- * GP73 == SWUPD_LED is output
- * GP78 == nCS2      is output
- * GP79 == nCS3      is output
- * GP80 == nCS4      is output
- */
-#define CONFIG_SYS_GPDR0_VAL       0x03808004
-#define CONFIG_SYS_GPDR1_VAL       0xF002A282
-#define CONFIG_SYS_GPDR2_VAL       0x0001C200
-
-/* GP15 == nCS1  is AF10
- * GP18 == RDY   is AF01
- * GP23 == SCLK  is AF10
- * GP24 == SFRM  is AF10
- * GP25 == TXD   is AF10
- * GP26 == RXD   is AF01
- * GP33 == nCS5  is AF10
- * GP34 == FFRXD is AF01
- * GP35 == CTS   is AF01
- * GP39 == FFTXD is AF10
- * GP41 == RTS   is AF10
- * GP46 == RXD   is AF10
- * GP47 == TXD   is AF01
- * GP49 == nPWE  is AF10
- * GP78 == nCS2  is AF10
- * GP79 == nCS3  is AF10
- * GP80 == nCS4  is AF10
- */
-#define CONFIG_SYS_GAFR0_L_VAL     0x80000000
-#define CONFIG_SYS_GAFR0_U_VAL     0x001A8010
-#define CONFIG_SYS_GAFR1_L_VAL     0x60088058
-#define CONFIG_SYS_GAFR1_U_VAL     0x00000008
-#define CONFIG_SYS_GAFR2_L_VAL     0xA0000000
-#define CONFIG_SYS_GAFR2_U_VAL     0x00000002
-
-
-/* FIXME: set GPIO_RER/FER */
-
-/* RDH = 1
- * PH  = 1
- * VFS = 1
- * BFS = 1
- * SSS = 1
- */
-#define CONFIG_SYS_PSSR_VAL		0x37
-
-/*
- * Memory settings
- *
- * This is the configuration for nCS0/1 -> flash banks
- * configuration for nCS1:
- * [31]    0    - Slower Device
- * [30:28] 010  - CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
- * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns
- * [19]    1    - 16 Bit bus width
- * [18:16] 000  - nonburst RAM or FLASH
- * configuration for nCS0:
- * [15]    0    - Slower Device
- * [14:12] 010  - CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
- * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns
- * [03]    1    - 16 Bit bus width
- * [02:00] 000  - nonburst RAM or FLASH
- */
-#define CONFIG_SYS_MSC0_VAL		0x25b825b8 /* flash banks                   */
-
-/* This is the configuration for nCS2/3 -> TDM-Switch, DSP
- * configuration for nCS3: DSP
- * [31]    0    - Slower Device
- * [30:28] 001  - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns
- * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns
- * [19]    1    - 16 Bit bus width
- * [18:16] 100  - variable latency I/O
- * configuration for nCS2: TDM-Switch
- * [15]    0    - Slower Device
- * [14:12] 101  - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns
- * [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns
- * [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns
- * [03]    1    - 16 Bit bus width
- * [02:00] 100  - variable latency I/O
- */
-#define CONFIG_SYS_MSC1_VAL		0x123C593C /* TDM switch, DSP               */
-
-/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller
- *
- * configuration for nCS5: LAN Controller
- * [31]    0    - Slower Device
- * [30:28] 001  - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns
- * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns
- * [19]    1    - 16 Bit bus width
- * [18:16] 100  - variable latency I/O
- * configuration for nCS4: ExtBus
- * [15]    0    - Slower Device
- * [14:12] 110  - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns
- * [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns
- * [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns
- * [03]    1    - 16 Bit bus width
- * [02:00] 100  - variable latency I/O
- */
-#define CONFIG_SYS_MSC2_VAL		0x123C6CDC /* extra bus, LAN controller     */
-
-/* MDCNFG: SDRAM Configuration Register
- *
- * [31:29]   000 - reserved
- * [28]      0	 - no SA1111 compatiblity mode
- * [27]      0   - latch return data with return clock
- * [26]      0   - alternate addressing for pair 2/3
- * [25:24]   00  - timings
- * [23]      0   - internal banks in lower partition 2/3 (not used)
- * [22:21]   00  - row address bits for partition 2/3 (not used)
- * [20:19]   00  - column address bits for partition 2/3 (not used)
- * [18]      0   - SDRAM partition 2/3 width is 32 bit
- * [17]      0   - SDRAM partition 3 disabled
- * [16]      0   - SDRAM partition 2 disabled
- * [15:13]   000 - reserved
- * [12]      1	 - SA1111 compatiblity mode
- * [11]      1   - latch return data with return clock
- * [10]      0   - no alternate addressing for pair 0/1
- * [09:08]   01  - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk
- * [7]       1   - 4 internal banks in lower partition pair
- * [06:05]   10  - 13 row address bits for partition 0/1
- * [04:03]   01  - 9 column address bits for partition 0/1
- * [02]      0   - SDRAM partition 0/1 width is 32 bit
- * [01]      0   - disable SDRAM partition 1
- * [00]      1   - enable  SDRAM partition 0
- */
-/* use the configuration above but disable partition 0 */
-#define CONFIG_SYS_MDCNFG_VAL		0x000019c8
-
-/* MDREFR: SDRAM Refresh Control Register
- *
- * [32:26] 0     - reserved
- * [25]    0     - K2FREE: not free running
- * [24]    0     - K1FREE: not free running
- * [23]    1     - K0FREE: not free running
- * [22]    0     - SLFRSH: self refresh disabled
- * [21]    0     - reserved
- * [20]    0     - APD: no auto power down
- * [19]    0     - K2DB2: SDCLK2 is MemClk
- * [18]    0     - K2RUN: disable SDCLK2
- * [17]    0     - K1DB2: SDCLK1 is MemClk
- * [16]    1     - K1RUN: enable SDCLK1
- * [15]    1     - E1PIN: SDRAM clock enable
- * [14]    1     - K0DB2: SDCLK0 is MemClk
- * [13]    0     - K0RUN: disable SDCLK0
- * [12]    1     - E0PIN: disable SDCKE0
- * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
- */
-#define CONFIG_SYS_MDREFR_VAL		0x0081D018
-
-/* MDMRS: Mode Register Set Configuration Register
- *
- * [31]      0       - reserved
- * [30:23]   00000000- MDMRS2: SDRAM2/3 MRS Value. (not used)
- * [22:20]   000     - MDCL2:  SDRAM2/3 Cas Latency.  (not used)
- * [19]      0       - MDADD2: SDRAM2/3 burst Type. Fixed to sequential.  (not used)
- * [18:16]   010     - MDBL2:  SDRAM2/3 burst Length. Fixed to 4.  (not used)
- * [15]      0       - reserved
- * [14:07]   00000000- MDMRS0: SDRAM0/1 MRS Value.
- * [06:04]   010     - MDCL0:  SDRAM0/1 Cas Latency.
- * [03]      0       - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
- * [02:00]   010     - MDBL0:  SDRAM0/1 burst Length. Fixed to 4.
- */
-#define CONFIG_SYS_MDMRS_VAL		0x00020022
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL		0x00000000
-#define CONFIG_SYS_MCMEM0_VAL		0x00000000
-#define CONFIG_SYS_MCMEM1_VAL		0x00000000
-#define CONFIG_SYS_MCATT0_VAL		0x00000000
-#define CONFIG_SYS_MCATT1_VAL		0x00000000
-#define CONFIG_SYS_MCIO0_VAL		0x00000000
-#define CONFIG_SYS_MCIO1_VAL		0x00000000
-#endif
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPSR0_VAL		0xFFFFFFFF
-#define CONFIG_SYS_GPSR1_VAL		0xFFFFFFFF
-#define CONFIG_SYS_GPSR2_VAL		0xFFFFFFFF
-#define CONFIG_SYS_GPCR0_VAL		0x08022080
-#define CONFIG_SYS_GPCR1_VAL		0x00000000
-#define CONFIG_SYS_GPCR2_VAL		0x00000000
-#define CONFIG_SYS_GPDR0_VAL		0xCD82A878
-#define CONFIG_SYS_GPDR1_VAL		0xFCFFAB80
-#define CONFIG_SYS_GPDR2_VAL		0x0001FFFF
-#define CONFIG_SYS_GAFR0_L_VAL		0x80000000
-#define CONFIG_SYS_GAFR0_U_VAL		0xA5254010
-#define CONFIG_SYS_GAFR1_L_VAL		0x599A9550
-#define CONFIG_SYS_GAFR1_U_VAL		0xAAA5AAAA
-#define CONFIG_SYS_GAFR2_L_VAL		0xAAAAAAAA
-#define CONFIG_SYS_GAFR2_U_VAL		0x00000002
-
-/* FIXME: set GPIO_RER/FER */
-
-#define CONFIG_SYS_PSSR_VAL        0x20
-
-#define	CONFIG_SYS_CCCR			CCCR_L27|CCCR_M2|CCCR_N10
-#define	CONFIG_SYS_CKEN			0x0
-
-/*
- * Memory settings
- */
-
-#define CONFIG_SYS_MSC0_VAL            0x2ef15af0
-#define CONFIG_SYS_MSC1_VAL            0x00003ff4
-#define CONFIG_SYS_MSC2_VAL            0x7ff07ff0
-#define CONFIG_SYS_MDCNFG_VAL          0x09a909a9
-#define CONFIG_SYS_MDREFR_VAL          0x038ff030
-#define CONFIG_SYS_MDMRS_VAL           0x00220022
-#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
-#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL        0x00000000
-#define CONFIG_SYS_MCMEM0_VAL      0x00000000
-#define CONFIG_SYS_MCMEM1_VAL      0x00000000
-#define CONFIG_SYS_MCATT0_VAL      0x00000000
-#define CONFIG_SYS_MCATT1_VAL      0x00000000
-#define CONFIG_SYS_MCIO0_VAL       0x00000000
-#define CONFIG_SYS_MCIO1_VAL       0x00000000
-
-#define CSB226_USER_LED0	0x00000008
-#define CSB226_USER_LED1	0x00000010
-#define CSB226_USER_LED2	0x00000020
-
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1	/* max number of memory banks       */
-#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sect. on one chip  */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase       */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Write       */
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR            (PHYS_FLASH_1 + 0x1C000)
-					/* Addr of Environment Sector       */
-#define CONFIG_ENV_SIZE            0x4000  /* Total Size of Environment Sector */
-
-#endif  /* __CONFIG_H */
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
deleted file mode 100644
index a0a3da1..0000000
--- a/include/configs/innokom.h
+++ /dev/null
@@ -1,507 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de.
- *
- * Configuration for the Auerswald Innokom CPU board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * include/configs/innokom.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_PXA250		1	/* This is an PXA250 CPU            */
-#define CONFIG_INNOKOM		1	/* on an Auerswald Innokom board    */
-
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff      */
-					/* for timer/console/ethernet       */
-
-#define	CONFIG_SYS_TEXT_BASE	0x0
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART		1	/* we use FFUART on CSB226 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE		19200
-#define CONFIG_MISC_INIT_R	1	/* we have a misc_init_r() function */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_RUN
-
-
-#define CONFIG_BOOTDELAY	3
-/* #define CONFIG_BOOTARGS	"root=/dev/nfs ip=bootp console=ttyS0,19200" */
-#define CONFIG_BOOTARGS		"console=ttyS0,19200"
-#define CONFIG_ETHADDR		FF:FF:FF:FF:FF:FF
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.1.56
-#define CONFIG_SERVERIP		192.168.1.2
-#define CONFIG_BOOTCOMMAND	"bootm 0x40000"
-#define CONFIG_SHOW_BOOT_PROGRESS
-
-#define CONFIG_CMDLINE_TAG	1
-
-/*
- * Miscellaneous configurable options
- */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(256*1024)
-
-#define CONFIG_SYS_LONGHELP				/* undef to save memory         */
-#define CONFIG_SYS_PROMPT		"uboot> "	/* Monitor Command Prompt       */
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size      */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	0xa0400000      /* memtest works on     */
-#define CONFIG_SYS_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
-
-#define CONFIG_SYS_LOAD_ADDR           0xa3000000      /* load kernel to this address   */
-
-#define CONFIG_SYS_HZ			1000
-						/* RS: the oscillator is actually 3680130?? */
-
-#define CONFIG_SYS_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
-						/* 0101000001 */
-						/*      ^^^^^ Memory Speed 99.53 MHz         */
-						/*    ^^      Run Mode Speed = 2x Mem Speed  */
-						/* ^^         Turbo Mode Sp. = 1x Run M. Sp. */
-
-#define CONFIG_SYS_MONITOR_LEN		0x20000		/* 128 KiB */
-
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * I2C bus
- */
-#define CONFIG_I2C_MV			1
-#define CONFIG_MV_I2C_REG		0x40301680
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED			50000
-#define CONFIG_SYS_I2C_SLAVE			0xfe
-
-#define CONFIG_ENV_IS_IN_EEPROM		1
-
-#define CONFIG_ENV_OFFSET			0x00	/* environment starts here  */
-#define CONFIG_ENV_SIZE			1024	/* 1 KiB                    */
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* A0 = 0 (hardwired)       */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* 5 bits = 32 octets       */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	15	/* between stop and start   */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2	/* length of address        */
-#define CONFIG_SYS_EEPROM_SIZE			4096	/* size in bytes            */
-#define CONFIG_SYS_I2C_INIT_BOARD		1	/* board has it's own init  */
-
-/*
- * SMSC91C111 Network Card
- */
-#define CONFIG_SMC91111		1
-#define CONFIG_SMC91111_BASE		0x14000000 /* chip select 5         */
-#undef  CONFIG_SMC_USE_32_BIT		           /* 16 bit bus access     */
-#undef  CONFIG_SMC_91111_EXT_PHY		   /* we use internal phy   */
-#define CONFIG_SMC_AUTONEG_TIMEOUT	10	   /* timeout 10 seconds    */
-#undef  CONFIG_SHOW_ACTIVITY
-#define CONFIG_NET_RETRY_COUNT		10	   /* # of retries          */
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
-#ifdef  CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM   */
-#define PHYS_SDRAM_1		0xa0000000	/* SDRAM Bank #1            */
-#define PHYS_SDRAM_1_SIZE	0x04000000	/* 64 MB                    */
-
-#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1            */
-#define PHYS_FLASH_SIZE		0x01000000	/* 16 MB                    */
-
-#define CONFIG_SYS_DRAM_BASE		0xa0000000	/* RAM starts here          */
-#define CONFIG_SYS_DRAM_SIZE		0x04000000
-
-#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		(GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
-
-/*
- * JFFS2 partitions
- *
- */
-/* development flash */
-#define CONFIG_MTD_INNOKOM_16MB	1
-#undef CONFIG_MTD_INNOKOM_64MB
-
-/* production flash */
-/*
-#define CONFIG_MTD_INNOKOM_64MB	1
-#undef CONFIG_MTD_INNOKOM_16MB
-*/
-
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nor0=innokom-0"
-*/
-
-/* development flash */
-/*
-#define MTDPARTS_DEFAULT	"mtdparts=innokom-0:256k(uboot),768k(kernel),8m(user),7m(data)"
-*/
-
-/* production flash */
-/*
-#define MTDPARTS_DEFAULT	"mtdparts=innokom-0:256k(uboot),768k(kernel),16256k(user1),16256k(user2),32m(data)"
-*/
-
-/*
- * GPIO settings
- *
- * GP15 == nCS1      is 1
- * GP24 == SFRM      is 1
- * GP25 == TXD       is 1
- * GP33 == nCS5      is 1
- * GP39 == FFTXD     is 1
- * GP41 == RTS       is 1
- * GP47 == TXD       is 1
- * GP49 == nPWE      is 1
- * GP62 == LED_B     is 1
- * GP63 == TDM_OE    is 1
- * GP78 == nCS2      is 1
- * GP79 == nCS3      is 1
- * GP80 == nCS4      is 1
- */
-#define CONFIG_SYS_GPSR0_VAL       0x03008000
-#define CONFIG_SYS_GPSR1_VAL       0xC0028282
-#define CONFIG_SYS_GPSR2_VAL       0x0001C000
-
-/* GP02 == DON_RST   is 0
- * GP23 == SCLK      is 0
- * GP45 == USB_ACT   is 0
- * GP60 == PLLEN     is 0
- * GP61 == LED_A     is 0
- * GP73 == SWUPD_LED is 0
- */
-#define CONFIG_SYS_GPCR0_VAL       0x00800004
-#define CONFIG_SYS_GPCR1_VAL       0x30002000
-#define CONFIG_SYS_GPCR2_VAL       0x00000100
-
-/* GP00 == DON_READY is input
- * GP01 == DON_OK    is input
- * GP02 == DON_RST   is output
- * GP03 == RESET_IND is input
- * GP07 == RES11     is input
- * GP09 == RES12     is input
- * GP11 == SWUPDATE  is input
- * GP14 == nPOWEROK  is input
- * GP15 == nCS1      is output
- * GP17 == RES22     is input
- * GP18 == RDY       is input
- * GP23 == SCLK      is output
- * GP24 == SFRM      is output
- * GP25 == TXD       is output
- * GP26 == RXD       is input
- * GP32 == RES21     is input
- * GP33 == nCS5      is output
- * GP34 == FFRXD     is input
- * GP35 == CTS       is input
- * GP39 == FFTXD     is output
- * GP41 == RTS       is output
- * GP42 == USB_OK    is input
- * GP45 == USB_ACT   is output
- * GP46 == RXD       is input
- * GP47 == TXD       is output
- * GP49 == nPWE      is output
- * GP58 == nCPUBUSINT is input
- * GP59 == LANINT    is input
- * GP60 == PLLEN     is output
- * GP61 == LED_A     is output
- * GP62 == LED_B     is output
- * GP63 == TDM_OE    is output
- * GP64 == nDSPINT   is input
- * GP65 == STRAP0    is input
- * GP67 == STRAP1    is input
- * GP69 == STRAP2    is input
- * GP70 == STRAP3    is input
- * GP71 == STRAP4    is input
- * GP73 == SWUPD_LED is output
- * GP78 == nCS2      is output
- * GP79 == nCS3      is output
- * GP80 == nCS4      is output
- */
-#define CONFIG_SYS_GPDR0_VAL       0x03808004
-#define CONFIG_SYS_GPDR1_VAL       0xF002A282
-#define CONFIG_SYS_GPDR2_VAL       0x0001C200
-
-/* GP15 == nCS1  is AF10
- * GP18 == RDY   is AF01
- * GP23 == SCLK  is AF10
- * GP24 == SFRM  is AF10
- * GP25 == TXD   is AF10
- * GP26 == RXD   is AF01
- * GP33 == nCS5  is AF10
- * GP34 == FFRXD is AF01
- * GP35 == CTS   is AF01
- * GP39 == FFTXD is AF10
- * GP41 == RTS   is AF10
- * GP46 == RXD   is AF10
- * GP47 == TXD   is AF01
- * GP49 == nPWE  is AF10
- * GP78 == nCS2  is AF10
- * GP79 == nCS3  is AF10
- * GP80 == nCS4  is AF10
- */
-#define CONFIG_SYS_GAFR0_L_VAL     0x80000000
-#define CONFIG_SYS_GAFR0_U_VAL     0x001A8010
-#define CONFIG_SYS_GAFR1_L_VAL     0x60088058
-#define CONFIG_SYS_GAFR1_U_VAL     0x00000008
-#define CONFIG_SYS_GAFR2_L_VAL     0xA0000000
-#define CONFIG_SYS_GAFR2_U_VAL     0x00000002
-
-
-/* FIXME: set GPIO_RER/FER */
-
-/* RDH = 1
- * PH  = 1
- * VFS = 1
- * BFS = 1
- * SSS = 1
- */
-#define CONFIG_SYS_PSSR_VAL		0x37
-
-#define	CONFIG_SYS_CCCR			CCCR_L27|CCCR_M2|CCCR_N10
-#define	CONFIG_SYS_CKEN			0x0
-
-/*
- * Memory settings
- *
- * This is the configuration for nCS0/1 -> flash banks
- * configuration for nCS1:
- * [31]    0    - Slower Device
- * [30:28] 010  - CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
- * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns
- * [19]    1    - 16 Bit bus width
- * [18:16] 000  - nonburst RAM or FLASH
- * configuration for nCS0:
- * [15]    0    - Slower Device
- * [14:12] 010  - CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
- * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns
- * [03]    1    - 16 Bit bus width
- * [02:00] 000  - nonburst RAM or FLASH
- */
-#define CONFIG_SYS_MSC0_VAL		0x25b825b8 /* flash banks                   */
-
-/* This is the configuration for nCS2/3 -> TDM-Switch, DSP
- * configuration for nCS3: DSP
- * [31]    0    - Slower Device
- * [30:28] 001  - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns
- * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns
- * [19]    1    - 16 Bit bus width
- * [18:16] 100  - variable latency I/O
- * configuration for nCS2: TDM-Switch
- * [15]    0    - Slower Device
- * [14:12] 101  - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns
- * [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns
- * [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns
- * [03]    1    - 16 Bit bus width
- * [02:00] 100  - variable latency I/O
- */
-#define CONFIG_SYS_MSC1_VAL		0x123C593C /* TDM switch, DSP               */
-
-/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller
- *
- * configuration for nCS5: LAN Controller
- * [31]    0    - Slower Device
- * [30:28] 001  - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns
- * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns
- * [19]    1    - 16 Bit bus width
- * [18:16] 100  - variable latency I/O
- * configuration for nCS4: ExtBus
- * [15]    0    - Slower Device
- * [14:12] 110  - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns
- * [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns
- * [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns
- * [03]    1    - 16 Bit bus width
- * [02:00] 100  - variable latency I/O
- */
-#define CONFIG_SYS_MSC2_VAL		0x123C6CDC /* extra bus, LAN controller     */
-
-/* MDCNFG: SDRAM Configuration Register
- *
- * [31:29]   000 - reserved
- * [28]      0	 - no SA1111 compatiblity mode
- * [27]      0   - latch return data with return clock
- * [26]      0   - alternate addressing for pair 2/3
- * [25:24]   00  - timings
- * [23]      0   - internal banks in lower partition 2/3 (not used)
- * [22:21]   00  - row address bits for partition 2/3 (not used)
- * [20:19]   00  - column address bits for partition 2/3 (not used)
- * [18]      0   - SDRAM partition 2/3 width is 32 bit
- * [17]      0   - SDRAM partition 3 disabled
- * [16]      0   - SDRAM partition 2 disabled
- * [15:13]   000 - reserved
- * [12]      1	 - SA1111 compatiblity mode
- * [11]      1   - latch return data with return clock
- * [10]      0   - no alternate addressing for pair 0/1
- * [09:08]   01  - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk
- * [7]       1   - 4 internal banks in lower partition pair
- * [06:05]   10  - 13 row address bits for partition 0/1
- * [04:03]   01  - 9 column address bits for partition 0/1
- * [02]      0   - SDRAM partition 0/1 width is 32 bit
- * [01]      0   - disable SDRAM partition 1
- * [00]      1   - enable  SDRAM partition 0
- */
-/* use the configuration above but disable partition 0 */
-#define CONFIG_SYS_MDCNFG_VAL		0x000019c8
-
-/* MDREFR: SDRAM Refresh Control Register
- *
- * [32:26] 0     - reserved
- * [25]    0     - K2FREE: not free running
- * [24]    0     - K1FREE: not free running
- * [23]    1     - K0FREE: not free running
- * [22]    0     - SLFRSH: self refresh disabled
- * [21]    0     - reserved
- * [20]    0     - APD: no auto power down
- * [19]    0     - K2DB2: SDCLK2 is MemClk
- * [18]    0     - K2RUN: disable SDCLK2
- * [17]    0     - K1DB2: SDCLK1 is MemClk
- * [16]    1     - K1RUN: enable SDCLK1
- * [15]    1     - E1PIN: SDRAM clock enable
- * [14]    1     - K0DB2: SDCLK0 is MemClk
- * [13]    0     - K0RUN: disable SDCLK0
- * [12]    1     - E0PIN: disable SDCKE0
- * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
- */
-#define CONFIG_SYS_MDREFR_VAL		0x0081D018
-
-/* MDMRS: Mode Register Set Configuration Register
- *
- * [31]      0       - reserved
- * [30:23]   00000000- MDMRS2: SDRAM2/3 MRS Value. (not used)
- * [22:20]   000     - MDCL2:  SDRAM2/3 Cas Latency.  (not used)
- * [19]      0       - MDADD2: SDRAM2/3 burst Type. Fixed to sequential.  (not used)
- * [18:16]   010     - MDBL2:  SDRAM2/3 burst Length. Fixed to 4.  (not used)
- * [15]      0       - reserved
- * [14:07]   00000000- MDMRS0: SDRAM0/1 MRS Value.
- * [06:04]   010     - MDCL0:  SDRAM0/1 Cas Latency.
- * [03]      0       - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
- * [02:00]   010     - MDBL0:  SDRAM0/1 burst Length. Fixed to 4.
- */
-#define CONFIG_SYS_MDMRS_VAL		0x00020022
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL		0x00000000
-#define CONFIG_SYS_MCMEM0_VAL		0x00000000
-#define CONFIG_SYS_MCMEM1_VAL		0x00000000
-#define CONFIG_SYS_MCATT0_VAL		0x00000000
-#define CONFIG_SYS_MCATT1_VAL		0x00000000
-#define CONFIG_SYS_MCIO0_VAL		0x00000000
-#define CONFIG_SYS_MCIO1_VAL		0x00000000
-
-#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
-#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
-
-/*
-#define CSB226_USER_LED0	0x00000008
-#define CSB226_USER_LED1	0x00000010
-#define CSB226_USER_LED2	0x00000020
-*/
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1	/* max number of memory banks       */
-#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sect. on one chip  */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase       */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Write       */
-
-#endif  /* __CONFIG_H */