clk: zynqmp: Fix clk dump values
With "clk dump" command, few clocks are showing up incorrect values
and some clocks are displayed as "unknown".
Add missing clocks to zynqmp clock driver to display proper
clocks rates.
Implement a simple way to get clock source, instead of calling
functions. Change existing functions to this simple mechanism.
Fix gem clock name "gem_rx" to "gem_tx" which was incorrect.
Change dbf_fpd & dbf_lpd clk names to dbg_fpd & dbg_lpd.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
diff --git a/drivers/clk/clk_zynqmp.c b/drivers/clk/clk_zynqmp.c
index 609d8e3..13a623f 100644
--- a/drivers/clk/clk_zynqmp.c
+++ b/drivers/clk/clk_zynqmp.c
@@ -97,8 +97,7 @@
#define CLK_CTRL_DIV1_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT)
#define CLK_CTRL_DIV0_SHIFT 8
#define CLK_CTRL_DIV0_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT)
-#define CLK_CTRL_SRCSEL_SHIFT 0
-#define CLK_CTRL_SRCSEL_MASK (0x3 << CLK_CTRL_SRCSEL_SHIFT)
+#define CLK_CTRL_SRCSEL_MASK 0x7
#define PLLCTRL_FBDIV_MASK 0x7f00
#define PLLCTRL_FBDIV_SHIFT 8
#define PLLCTRL_RESET_MASK 1
@@ -132,7 +131,7 @@
iou_switch,
gem_tsu_ref, gem_tsu,
gem0_ref, gem1_ref, gem2_ref, gem3_ref,
- gem0_rx, gem1_rx, gem2_rx, gem3_rx,
+ gem0_tx, gem1_tx, gem2_tx, gem3_tx,
qspi_ref,
sdio0_ref, sdio1_ref,
uart0_ref, uart1_ref,
@@ -152,7 +151,7 @@
"iopll", "rpll", "apll", "dpll",
"vpll", "iopll_to_fpd", "rpll_to_fpd",
"apll_to_lpd", "dpll_to_lpd", "vpll_to_lpd",
- "acpu", "acpu_half", "dbf_fpd", "dbf_lpd",
+ "acpu", "acpu_half", "dbg_fpd", "dbg_lpd",
"dbg_trace", "dbg_tstmp", "dp_video_ref",
"dp_audio_ref", "dp_stc_ref", "gdma_ref",
"dpdma_ref", "ddr_ref", "sata_ref", "pcie_ref",
@@ -172,6 +171,38 @@
"ams_ref", "pl0", "pl1", "pl2", "pl3", "wdt"
};
+static const u32 pll_src[][4] = {
+ {apll, 0xff, dpll, vpll}, /* acpu */
+ {dpll, vpll, 0xff, 0xff}, /* ddr_ref */
+ {rpll, iopll, 0xff, 0xff}, /* dll_ref */
+ {iopll, 0xff, rpll, dpll_to_lpd}, /* gem_tsu_ref */
+ {iopll, 0xff, rpll, dpll}, /* peripheral */
+ {apll, 0xff, iopll_to_fpd, dpll}, /* wdt */
+ {iopll_to_fpd, 0xff, dpll, apll}, /* dbg_fpd */
+ {iopll, 0xff, rpll, dpll_to_lpd}, /* timestamp_ref */
+ {iopll_to_fpd, 0xff, apll, dpll}, /* sata_ref */
+ {iopll_to_fpd, 0xff, rpll_to_fpd, dpll},/* pcie_ref */
+ {iopll_to_fpd, 0xff, vpll, dpll}, /* gpu_ref */
+ {apll, 0xff, vpll, dpll}, /* topsw_main_ref */
+ {rpll, 0xff, iopll, dpll_to_lpd}, /* cpu_r5_ref */
+};
+
+enum zynqmp_clk_pll_src {
+ ACPU_CLK_SRC = 0,
+ DDR_CLK_SRC,
+ DLL_CLK_SRC,
+ GEM_TSU_CLK_SRC,
+ PERI_CLK_SRC,
+ WDT_CLK_SRC,
+ DBG_FPD_CLK_SRC,
+ TIMESTAMP_CLK_SRC,
+ SATA_CLK_SRC,
+ PCIE_CLK_SRC,
+ GPU_CLK_SRC,
+ TOPSW_MAIN_CLK_SRC,
+ CPU_R5_CLK_SRC
+};
+
struct zynqmp_clk_priv {
unsigned long ps_clk_freq;
unsigned long video_clk;
@@ -195,12 +226,38 @@
return CRF_APB_VPLL_CTRL;
case acpu:
return CRF_APB_ACPU_CTRL;
+ case dbg_fpd:
+ return CRF_APB_DBG_FPD_CTRL;
+ case dbg_trace:
+ return CRF_APB_DBG_TRACE_CTRL;
+ case dbg_tstmp:
+ return CRF_APB_DBG_TSTMP_CTRL;
+ case gpu_ref ... gpu_pp1_ref:
+ return CRF_APB_GPU_REF_CTRL;
case ddr_ref:
return CRF_APB_DDR_CTRL;
+ case sata_ref:
+ return CRF_APB_SATA_REF_CTRL;
+ case pcie_ref:
+ return CRF_APB_PCIE_REF_CTRL;
+ case gdma_ref:
+ return CRF_APB_GDMA_REF_CTRL;
+ case dpdma_ref:
+ return CRF_APB_DPDMA_REF_CTRL;
+ case topsw_main:
+ return CRF_APB_TOPSW_MAIN_CTRL;
+ case topsw_lsbus:
+ return CRF_APB_TOPSW_LSBUS_CTRL;
+ case lpd_switch:
+ return CRL_APB_LPD_SWITCH_CTRL;
+ case lpd_lsbus:
+ return CRL_APB_LPD_LSBUS_CTRL;
case qspi_ref:
return CRL_APB_QSPI_REF_CTRL;
case usb3_dual_ref:
return CRL_APB_USB3_DUAL_REF_CTRL;
+ case gem_tsu_ref:
+ return CRL_APB_GEM_TSU_REF_CTRL;
case gem0_ref:
return CRL_APB_GEM0_REF_CTRL;
case gem1_ref:
@@ -213,6 +270,8 @@
return CRL_APB_USB0_BUS_REF_CTRL;
case usb1_bus_ref:
return CRL_APB_USB1_BUS_REF_CTRL;
+ case cpu_r5:
+ return CRL_APB_CPU_R5_CTRL;
case uart0_ref:
return CRL_APB_UART0_REF_CTRL;
case uart1_ref:
@@ -235,6 +294,14 @@
return CRL_APB_CAN0_REF_CTRL;
case can1_ref:
return CRL_APB_CAN1_REF_CTRL;
+ case dll_ref:
+ return CRL_APB_DLL_REF_CTRL;
+ case adma_ref:
+ return CRL_APB_ADMA_REF_CTRL;
+ case timestamp_ref:
+ return CRL_APB_TIMESTAMP_REF_CTRL;
+ case ams_ref:
+ return CRL_APB_AMS_REF_CTRL;
case pl0:
return CRL_APB_PL0_REF_CTRL;
case pl1:
@@ -253,68 +320,6 @@
return 0;
}
-static enum zynqmp_clk zynqmp_clk_get_cpu_pll(u32 clk_ctrl)
-{
- u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >>
- CLK_CTRL_SRCSEL_SHIFT;
-
- switch (srcsel) {
- case 2:
- return dpll;
- case 3:
- return vpll;
- case 0 ... 1:
- default:
- return apll;
- }
-}
-
-static enum zynqmp_clk zynqmp_clk_get_ddr_pll(u32 clk_ctrl)
-{
- u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >>
- CLK_CTRL_SRCSEL_SHIFT;
-
- switch (srcsel) {
- case 1:
- return vpll;
- case 0:
- default:
- return dpll;
- }
-}
-
-static enum zynqmp_clk zynqmp_clk_get_peripheral_pll(u32 clk_ctrl)
-{
- u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >>
- CLK_CTRL_SRCSEL_SHIFT;
-
- switch (srcsel) {
- case 2:
- return rpll;
- case 3:
- return dpll;
- case 0 ... 1:
- default:
- return iopll;
- }
-}
-
-static enum zynqmp_clk zynqmp_clk_get_wdt_pll(u32 clk_ctrl)
-{
- u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >>
- CLK_CTRL_SRCSEL_SHIFT;
-
- switch (srcsel) {
- case 2:
- return iopll_to_fpd;
- case 3:
- return dpll;
- case 0 ... 1:
- default:
- return apll;
- }
-}
-
static ulong zynqmp_clk_get_pll_src(ulong clk_ctrl,
struct zynqmp_clk_priv *priv,
bool is_pre_src)
@@ -378,7 +383,7 @@
static ulong zynqmp_clk_get_cpu_rate(struct zynqmp_clk_priv *priv,
enum zynqmp_clk id)
{
- u32 clk_ctrl, div;
+ u32 clk_ctrl, div, srcsel;
enum zynqmp_clk pll;
int ret;
unsigned long pllrate;
@@ -391,7 +396,8 @@
div = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
- pll = zynqmp_clk_get_cpu_pll(clk_ctrl);
+ srcsel = clk_ctrl & CLK_CTRL_SRCSEL_MASK;
+ pll = pll_src[ACPU_CLK_SRC][srcsel];
pllrate = zynqmp_clk_get_pll_rate(priv, pll);
if (IS_ERR_VALUE(pllrate))
return pllrate;
@@ -401,7 +407,7 @@
static ulong zynqmp_clk_get_ddr_rate(struct zynqmp_clk_priv *priv)
{
- u32 clk_ctrl, div;
+ u32 clk_ctrl, div, srcsel;
enum zynqmp_clk pll;
int ret;
ulong pllrate;
@@ -414,7 +420,8 @@
div = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
- pll = zynqmp_clk_get_ddr_pll(clk_ctrl);
+ srcsel = clk_ctrl & CLK_CTRL_SRCSEL_MASK;
+ pll = pll_src[DDR_CLK_SRC][srcsel];
pllrate = zynqmp_clk_get_pll_rate(priv, pll);
if (IS_ERR_VALUE(pllrate))
return pllrate;
@@ -422,11 +429,33 @@
return DIV_ROUND_CLOSEST(pllrate, div);
}
+static ulong zynqmp_clk_get_dll_rate(struct zynqmp_clk_priv *priv)
+{
+ u32 clk_ctrl, srcsel;
+ enum zynqmp_clk pll;
+ ulong pllrate;
+ int ret;
+
+ ret = zynqmp_mmio_read(CRL_APB_DLL_REF_CTRL, &clk_ctrl);
+ if (ret) {
+ printf("%s mio read fail\n", __func__);
+ return -EIO;
+ }
+
+ srcsel = clk_ctrl & CLK_CTRL_SRCSEL_MASK;
+ pll = pll_src[DLL_CLK_SRC][srcsel];
+ pllrate = zynqmp_clk_get_pll_rate(priv, pll);
+ if (IS_ERR_VALUE(pllrate))
+ return pllrate;
+
+ return pllrate;
+}
+
static ulong zynqmp_clk_get_peripheral_rate(struct zynqmp_clk_priv *priv,
- enum zynqmp_clk id, bool two_divs)
+ enum zynqmp_clk id, bool two_divs)
{
enum zynqmp_clk pll;
- u32 clk_ctrl, div0;
+ u32 clk_ctrl, div0, srcsel;
u32 div1 = 1;
int ret;
ulong pllrate;
@@ -446,8 +475,13 @@
if (!div1)
div1 = 1;
}
+ srcsel = clk_ctrl & CLK_CTRL_SRCSEL_MASK;
- pll = zynqmp_clk_get_peripheral_pll(clk_ctrl);
+ if (id == gem_tsu_ref)
+ pll = pll_src[GEM_TSU_CLK_SRC][srcsel];
+ else
+ pll = pll_src[PERI_CLK_SRC][srcsel];
+
pllrate = zynqmp_clk_get_pll_rate(priv, pll);
if (IS_ERR_VALUE(pllrate))
return pllrate;
@@ -457,11 +491,11 @@
DIV_ROUND_CLOSEST(pllrate, div0), div1);
}
-static ulong zynqmp_clk_get_wdt_rate(struct zynqmp_clk_priv *priv,
- enum zynqmp_clk id, bool two_divs)
+static ulong zynqmp_clk_get_crf_crl_rate(struct zynqmp_clk_priv *priv,
+ enum zynqmp_clk id, bool two_divs)
{
enum zynqmp_clk pll;
- u32 clk_ctrl, div0;
+ u32 clk_ctrl, div0, srcsel;
u32 div1 = 1;
int ret;
ulong pllrate;
@@ -475,8 +509,45 @@
div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
if (!div0)
div0 = 1;
+ srcsel = clk_ctrl & CLK_CTRL_SRCSEL_MASK;
- pll = zynqmp_clk_get_wdt_pll(clk_ctrl);
+ switch (id) {
+ case wdt:
+ case dbg_trace:
+ case topsw_lsbus:
+ pll = pll_src[WDT_CLK_SRC][srcsel];
+ break;
+ case dbg_fpd:
+ case dbg_tstmp:
+ pll = pll_src[DBG_FPD_CLK_SRC][srcsel];
+ break;
+ case timestamp_ref:
+ pll = pll_src[TIMESTAMP_CLK_SRC][srcsel];
+ break;
+ case sata_ref:
+ pll = pll_src[SATA_CLK_SRC][srcsel];
+ break;
+ case pcie_ref:
+ pll = pll_src[PCIE_CLK_SRC][srcsel];
+ break;
+ case gpu_ref ... gpu_pp1_ref:
+ pll = pll_src[GPU_CLK_SRC][srcsel];
+ break;
+ case gdma_ref:
+ case dpdma_ref:
+ case topsw_main:
+ pll = pll_src[TOPSW_MAIN_CLK_SRC][srcsel];
+ break;
+ case cpu_r5:
+ case ams_ref:
+ case adma_ref:
+ case lpd_lsbus:
+ case lpd_switch:
+ pll = pll_src[CPU_R5_CLK_SRC][srcsel];
+ break;
+ default:
+ return -ENXIO;
+ }
if (two_divs) {
ret = zynqmp_mmio_read(zynqmp_clk_get_register(pll), &clk_ctrl);
if (ret) {
@@ -533,7 +604,7 @@
enum zynqmp_clk pll;
u32 clk_ctrl, div0 = 0, div1 = 0;
ulong pll_rate, new_rate;
- u32 reg;
+ u32 reg, srcsel;
int ret;
u32 mask;
@@ -544,7 +615,8 @@
return -EIO;
}
- pll = zynqmp_clk_get_peripheral_pll(clk_ctrl);
+ srcsel = clk_ctrl & CLK_CTRL_SRCSEL_MASK;
+ pll = pll_src[PERI_CLK_SRC][srcsel];
pll_rate = zynqmp_clk_get_pll_rate(priv, pll);
if (IS_ERR_VALUE(pll_rate))
return pll_rate;
@@ -588,14 +660,31 @@
return zynqmp_clk_get_cpu_rate(priv, id);
case ddr_ref:
return zynqmp_clk_get_ddr_rate(priv);
+ case dll_ref:
+ return zynqmp_clk_get_dll_rate(priv);
+ case gem_tsu_ref:
+ case pl0 ... pl3:
case gem0_ref ... gem3_ref:
case qspi_ref ... can1_ref:
- case pl0 ... pl3:
+ case usb0_bus_ref ... usb3_dual_ref:
two_divs = true;
return zynqmp_clk_get_peripheral_rate(priv, id, two_divs);
case wdt:
+ case topsw_lsbus:
+ case sata_ref ... gpu_pp1_ref:
two_divs = true;
- return zynqmp_clk_get_wdt_rate(priv, id, two_divs);
+ case cpu_r5:
+ case dbg_fpd:
+ case ams_ref:
+ case adma_ref:
+ case lpd_lsbus:
+ case dbg_trace:
+ case dbg_tstmp:
+ case lpd_switch:
+ case topsw_main:
+ case timestamp_ref:
+ case gdma_ref ... dpdma_ref:
+ return zynqmp_clk_get_crf_crl_rate(priv, id, two_divs);
default:
return -ENXIO;
}