Code cleanup.
diff --git a/board/MAI/AmigaOneG3SE/enet.c b/board/MAI/AmigaOneG3SE/enet.c
index d4be889..ad2bcde 100644
--- a/board/MAI/AmigaOneG3SE/enet.c
+++ b/board/MAI/AmigaOneG3SE/enet.c
@@ -41,57 +41,57 @@
/* 3Com Commands, top 5 bits are command and bottom 11 bits are parameters */
-#define TotalReset (0<<11)
-#define SelectWindow (1<<11)
-#define StartCoax (2<<11)
-#define RxDisable (3<<11)
-#define RxEnable (4<<11)
-#define RxReset (5<<11)
-#define UpStall (6<<11)
-#define UpUnstall (6<<11)+1
-#define DownStall (6<<11)+2
-#define DownUnstall (6<<11)+3
-#define RxDiscard (8<<11)
-#define TxEnable (9<<11)
-#define TxDisable (10<<11)
-#define TxReset (11<<11)
-#define FakeIntr (12<<11)
-#define AckIntr (13<<11)
-#define SetIntrEnb (14<<11)
-#define SetStatusEnb (15<<11)
-#define SetRxFilter (16<<11)
-#define SetRxThreshold (17<<11)
-#define SetTxThreshold (18<<11)
-#define SetTxStart (19<<11)
-#define StartDMAUp (20<<11)
-#define StartDMADown (20<<11)+1
+#define TotalReset (0<<11)
+#define SelectWindow (1<<11)
+#define StartCoax (2<<11)
+#define RxDisable (3<<11)
+#define RxEnable (4<<11)
+#define RxReset (5<<11)
+#define UpStall (6<<11)
+#define UpUnstall (6<<11)+1
+#define DownStall (6<<11)+2
+#define DownUnstall (6<<11)+3
+#define RxDiscard (8<<11)
+#define TxEnable (9<<11)
+#define TxDisable (10<<11)
+#define TxReset (11<<11)
+#define FakeIntr (12<<11)
+#define AckIntr (13<<11)
+#define SetIntrEnb (14<<11)
+#define SetStatusEnb (15<<11)
+#define SetRxFilter (16<<11)
+#define SetRxThreshold (17<<11)
+#define SetTxThreshold (18<<11)
+#define SetTxStart (19<<11)
+#define StartDMAUp (20<<11)
+#define StartDMADown (20<<11)+1
#define StatsEnable (21<<11)
#define StatsDisable (22<<11)
-#define StopCoax (23<<11)
-#define SetFilterBit (25<<11)
+#define StopCoax (23<<11)
+#define SetFilterBit (25<<11)
/* The SetRxFilter command accepts the following classes */
-#define RxStation 1
+#define RxStation 1
#define RxMulticast 2
#define RxBroadcast 4
-#define RxProm 8
+#define RxProm 8
/* 3Com status word defnitions */
-#define IntLatch 0x0001
-#define HostError 0x0002
-#define TxComplete 0x0004
-#define TxAvailable 0x0008
-#define RxComplete 0x0010
-#define RxEarly 0x0020
-#define IntReq 0x0040
-#define StatsFull 0x0080
-#define DMADone (1<<8)
-#define DownComplete (1<<9)
-#define UpComplete (1<<10)
-#define DMAInProgress (1<<11) /* DMA controller is still busy.*/
-#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/
+#define IntLatch 0x0001
+#define HostError 0x0002
+#define TxComplete 0x0004
+#define TxAvailable 0x0008
+#define RxComplete 0x0010
+#define RxEarly 0x0020
+#define IntReq 0x0040
+#define StatsFull 0x0080
+#define DMADone (1<<8)
+#define DownComplete (1<<9)
+#define UpComplete (1<<10)
+#define DMAInProgress (1<<11) /* DMA controller is still busy.*/
+#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/
/* Polling Registers */
@@ -100,17 +100,17 @@
/* Register window 0 offets */
-#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */
-#define Wn0EepromData 12 /* Window 0: EEPROM results register. */
+#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */
+#define Wn0EepromData 12 /* Window 0: EEPROM results register. */
#define IntrStatus 0x0E /* Valid in all windows. */
/* Register window 0 EEPROM bits */
-#define EEPROM_Read 0x80
-#define EEPROM_WRITE 0x40
-#define EEPROM_ERASE 0xC0
-#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */
-#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */
+#define EEPROM_Read 0x80
+#define EEPROM_WRITE 0x40
+#define EEPROM_ERASE 0xC0
+#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */
+#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */
/* EEPROM locations. */
@@ -129,13 +129,13 @@
/* Register window 1 offsets, the window used in normal operation */
-#define TX_FIFO 0x10
-#define RX_FIFO 0x10
-#define RxErrors 0x14
-#define RxStatus 0x18
+#define TX_FIFO 0x10
+#define RX_FIFOa 0x10
+#define RxErrors 0x14
+#define RxStatus 0x18
#define Timer 0x1A
-#define TxStatus 0x1B
-#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */
+#define TxStatus 0x1B
+#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */
/* Register Window 2 */
@@ -147,47 +147,47 @@
#define Wn3_MAC_Ctrl 6
#define Wn3_Options 8
-#define BFEXT(value, offset, bitcount) \
+#define BFEXT(value, offset, bitcount) \
((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1))
#define BFINS(lhs, rhs, offset, bitcount) \
- (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \
+ (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \
(((rhs) & ((1 << (bitcount)) - 1)) << (offset)))
#define RAM_SIZE(v) BFEXT(v, 0, 3)
-#define RAM_WIDTH(v) BFEXT(v, 3, 1)
-#define RAM_SPEED(v) BFEXT(v, 4, 2)
+#define RAM_WIDTH(v) BFEXT(v, 3, 1)
+#define RAM_SPEED(v) BFEXT(v, 4, 2)
#define ROM_SIZE(v) BFEXT(v, 6, 2)
-#define RAM_SPLIT(v) BFEXT(v, 16, 2)
+#define RAM_SPLIT(v) BFEXT(v, 16, 2)
#define XCVR(v) BFEXT(v, 20, 4)
-#define AUTOSELECT(v) BFEXT(v, 24, 1)
+#define AUTOSELECT(v) BFEXT(v, 24, 1)
/* Register Window 4: Xcvr/media bits */
-#define Wn4_FIFODiag 4
-#define Wn4_NetDiag 6
+#define Wn4_FIFODiag 4
+#define Wn4_NetDiag 6
#define Wn4_PhysicalMgmt 8
-#define Wn4_Media 10
+#define Wn4_Media 10
-#define Media_SQE 0x0008 /* Enable SQE error counting for AUI. */
-#define Media_10TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
-#define Media_Lnk 0x0080 /* Enable just link beat for 100TX/100FX. */
-#define Media_LnkBeat 0x0800
+#define Media_SQE 0x0008 /* Enable SQE error counting for AUI. */
+#define Media_10TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
+#define Media_Lnk 0x0080 /* Enable just link beat for 100TX/100FX. */
+#define Media_LnkBeat 0x0800
/* Register Window 7: Bus Master control */
-#define Wn7_MasterAddr 0
-#define Wn7_MasterLen 6
-#define Wn7_MasterStatus 12
+#define Wn7_MasterAddr 0
+#define Wn7_MasterLen 6
+#define Wn7_MasterStatus 12
/* Boomerang bus master control registers. */
-#define PktStatus 0x20
+#define PktStatus 0x20
#define DownListPtr 0x24
-#define FragAddr 0x28
-#define FragLen 0x2c
+#define FragAddr 0x28
+#define FragLen 0x2c
#define TxFreeThreshold 0x2f
-#define UpPktStatus 0x30
+#define UpPktStatus 0x30
#define UpListPtr 0x38
/* The Rx and Tx descriptor lists. */