x86: ivybridge: Use driver model PCI API in sata.c
Adjust the functions in this file to use the driver model PCI API.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/arch/x86/cpu/ivybridge/sata.c b/arch/x86/cpu/ivybridge/sata.c
index 6314566..21e11d1 100644
--- a/arch/x86/cpu/ivybridge/sata.c
+++ b/arch/x86/cpu/ivybridge/sata.c
@@ -15,42 +15,47 @@
DECLARE_GLOBAL_DATA_PTR;
-static inline u32 sir_read(pci_dev_t dev, int idx)
+static inline u32 sir_read(struct udevice *dev, int idx)
{
- x86_pci_write_config32(dev, SATA_SIRI, idx);
- return x86_pci_read_config32(dev, SATA_SIRD);
+ u32 data;
+
+ dm_pci_write_config32(dev, SATA_SIRI, idx);
+ dm_pci_read_config32(dev, SATA_SIRD, &data);
+
+ return data;
}
-static inline void sir_write(pci_dev_t dev, int idx, u32 value)
+static inline void sir_write(struct udevice *dev, int idx, u32 value)
{
- x86_pci_write_config32(dev, SATA_SIRI, idx);
- x86_pci_write_config32(dev, SATA_SIRD, value);
+ dm_pci_write_config32(dev, SATA_SIRI, idx);
+ dm_pci_write_config32(dev, SATA_SIRD, value);
}
-static void common_sata_init(pci_dev_t dev, unsigned int port_map)
+static void common_sata_init(struct udevice *dev, unsigned int port_map)
{
u32 reg32;
u16 reg16;
/* Set IDE I/O Configuration */
reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
- x86_pci_write_config32(dev, IDE_CONFIG, reg32);
+ dm_pci_write_config32(dev, IDE_CONFIG, reg32);
/* Port enable */
- reg16 = x86_pci_read_config16(dev, 0x92);
+ dm_pci_read_config16(dev, 0x92, ®16);
reg16 &= ~0x3f;
reg16 |= port_map;
- x86_pci_write_config16(dev, 0x92, reg16);
+ dm_pci_write_config16(dev, 0x92, reg16);
/* SATA Initialization register */
port_map &= 0xff;
- x86_pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
+ dm_pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
}
-static void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
+static void bd82x6x_sata_init(struct udevice *dev)
{
unsigned int port_map, speed_support, port_tx;
- struct pci_controller *hose = pci_bus_to_hose(0);
+ const void *blob = gd->fdt_blob;
+ int node = dev->of_offset;
const char *mode;
u32 reg32;
u16 reg16;
@@ -62,33 +67,27 @@
speed_support = fdtdec_get_int(blob, node,
"sata_interface_speed_support", 0);
- /* Enable BARs */
- x86_pci_write_config16(dev, PCI_COMMAND, 0x0007);
-
mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
if (!mode || !strcmp(mode, "ahci")) {
u32 abar;
debug("SATA: Controller in AHCI mode\n");
- /* Set Interrupt Line, Interrupt Pin is set by D31IP.PIP */
- x86_pci_write_config8(dev, INTR_LN, 0x0a);
-
/* Set timings */
- x86_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+ dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
- x86_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+ dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
/* Sync DMA */
- x86_pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
- x86_pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
+ dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
+ dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
common_sata_init(dev, 0x8000 | port_map);
/* Initialize AHCI memory-mapped space */
- abar = pci_read_bar32(hose, dev, 5);
+ abar = dm_pci_read_bar32(dev, 5);
debug("ABAR: %08X\n", abar);
/* CAP (HBA Capabilities) : enable power management */
reg32 = readl(abar + 0x00);
@@ -116,59 +115,54 @@
debug("SATA: Controller in combined mode\n");
/* No AHCI: clear AHCI base */
- pci_write_bar32(hose, dev, 5, 0x00000000);
+ dm_pci_write_bar32(dev, 5, 0x00000000);
/* And without AHCI BAR no memory decoding */
- reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
+ dm_pci_read_config16(dev, PCI_COMMAND, ®16);
reg16 &= ~PCI_COMMAND_MEMORY;
- x86_pci_write_config16(dev, PCI_COMMAND, reg16);
+ dm_pci_write_config16(dev, PCI_COMMAND, reg16);
- x86_pci_write_config8(dev, 0x09, 0x80);
+ dm_pci_write_config8(dev, 0x09, 0x80);
/* Set timings */
- x86_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+ dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
- x86_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+ dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
/* Sync DMA */
- x86_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
- x86_pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
+ dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
+ dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
common_sata_init(dev, port_map);
} else {
debug("SATA: Controller in plain-ide mode\n");
/* No AHCI: clear AHCI base */
- pci_write_bar32(hose, dev, 5, 0x00000000);
+ dm_pci_write_bar32(dev, 5, 0x00000000);
/* And without AHCI BAR no memory decoding */
- reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
+ dm_pci_read_config16(dev, PCI_COMMAND, ®16);
reg16 &= ~PCI_COMMAND_MEMORY;
- x86_pci_write_config16(dev, PCI_COMMAND, reg16);
+ dm_pci_write_config16(dev, PCI_COMMAND, reg16);
/*
* Native mode capable on both primary and secondary (0xa)
* OR'ed with enabled (0x50) = 0xf
*/
- x86_pci_write_config8(dev, 0x09, 0x8f);
-
- /* Set Interrupt Line */
- /* Interrupt Pin is set by D31IP.PIP */
- x86_pci_write_config8(dev, INTR_LN, 0xff);
+ dm_pci_write_config8(dev, 0x09, 0x8f);
/* Set timings */
- x86_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+ dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
- x86_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+ dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_SITRE | IDE_ISP_3_CLOCKS |
IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0);
/* Sync DMA */
- x86_pci_write_config16(dev, IDE_SDMA_CNT,
- IDE_SSDE0 | IDE_PSDE0);
- x86_pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
+ dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0);
+ dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
common_sata_init(dev, port_map);
}
@@ -209,8 +203,10 @@
pch_iobp_update(0xea00408a, 0xfffffcff, 0x00000100);
}
-static void bd82x6x_sata_enable(pci_dev_t dev, const void *blob, int node)
+static void bd82x6x_sata_enable(struct udevice *dev)
{
+ const void *blob = gd->fdt_blob;
+ int node = dev->of_offset;
unsigned port_map;
const char *mode;
u16 map = 0;
@@ -225,15 +221,15 @@
port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
map |= (port_map ^ 0x3f) << 8;
- x86_pci_write_config16(dev, 0x90, map);
+ dm_pci_write_config16(dev, 0x90, map);
}
static int bd82x6x_sata_probe(struct udevice *dev)
{
if (!(gd->flags & GD_FLG_RELOC))
- bd82x6x_sata_enable(PCH_SATA_DEV, gd->fdt_blob, dev->of_offset);
+ bd82x6x_sata_enable(dev);
else
- bd82x6x_sata_init(PCH_SATA_DEV, gd->fdt_blob, dev->of_offset);
+ bd82x6x_sata_init(dev);
return 0;
}