ARM: bcm283x: merge BCM2835/BCM2836 directories into mach-bcm283x
BCM2835 (used on Raspberry Pi) and BCM2836 (used on Raspberry Pi 2)
are similar enough. One of the biggest differences is the ARM
processor. It is reasonable to collect the source files into a
single place, arch/arm/mach-bcm283x/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
new file mode 100644
index 0000000..d5e09e8
--- /dev/null
+++ b/arch/arm/mach-bcm283x/Kconfig
@@ -0,0 +1,40 @@
+menu "Broadcom BCM283X family"
+ depends on ARCH_BCM283X
+
+choice
+ prompt "Broadcom BCM283X board select"
+
+config TARGET_RPI
+ bool "Raspberry Pi"
+ select CPU_ARM1176
+
+config TARGET_RPI_2
+ bool "Raspberry Pi 2"
+ select CPU_V7
+
+endchoice
+
+config DM
+ default y
+
+config DM_SERIAL
+ default y
+
+config DM_GPIO
+ default y
+
+config SYS_BOARD
+ default "rpi" if TARGET_RPI
+ default "rpi_2" if TARGET_RPI_2
+
+config SYS_VENDOR
+ default "raspberrypi"
+
+config SYS_SOC
+ default "bcm2835"
+
+config SYS_CONFIG_NAME
+ default "rpi" if TARGET_RPI
+ default "rpi_2" if TARGET_RPI_2
+
+endmenu
diff --git a/arch/arm/mach-bcm283x/Makefile b/arch/arm/mach-bcm283x/Makefile
new file mode 100644
index 0000000..2505428
--- /dev/null
+++ b/arch/arm/mach-bcm283x/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2012 Stephen Warren
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-$(CONFIG_TARGET_RPI) += lowlevel_init.o
+obj-y += init.o reset.o timer.o mbox.o
diff --git a/arch/arm/mach-bcm283x/init.c b/arch/arm/mach-bcm283x/init.c
new file mode 100644
index 0000000..e90d3bb
--- /dev/null
+++ b/arch/arm/mach-bcm283x/init.c
@@ -0,0 +1,24 @@
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+
+int arch_cpu_init(void)
+{
+ icache_enable();
+
+ return 0;
+}
diff --git a/arch/arm/mach-bcm283x/lowlevel_init.S b/arch/arm/mach-bcm283x/lowlevel_init.S
new file mode 100644
index 0000000..c7b0843
--- /dev/null
+++ b/arch/arm/mach-bcm283x/lowlevel_init.S
@@ -0,0 +1,19 @@
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+.globl lowlevel_init
+lowlevel_init:
+ mov pc, lr
diff --git a/arch/arm/mach-bcm283x/mbox.c b/arch/arm/mach-bcm283x/mbox.c
new file mode 100644
index 0000000..3b17a31
--- /dev/null
+++ b/arch/arm/mach-bcm283x/mbox.c
@@ -0,0 +1,153 @@
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mbox.h>
+
+#define TIMEOUT 1000 /* ms */
+
+int bcm2835_mbox_call_raw(u32 chan, u32 send, u32 *recv)
+{
+ struct bcm2835_mbox_regs *regs =
+ (struct bcm2835_mbox_regs *)BCM2835_MBOX_PHYSADDR;
+ ulong endtime = get_timer(0) + TIMEOUT;
+ u32 val;
+
+ debug("time: %lu timeout: %lu\n", get_timer(0), endtime);
+
+ if (send & BCM2835_CHAN_MASK) {
+ printf("mbox: Illegal mbox data 0x%08x\n", send);
+ return -1;
+ }
+
+ /* Drain any stale responses */
+
+ for (;;) {
+ val = readl(®s->status);
+ if (val & BCM2835_MBOX_STATUS_RD_EMPTY)
+ break;
+ if (get_timer(0) >= endtime) {
+ printf("mbox: Timeout draining stale responses\n");
+ return -1;
+ }
+ val = readl(®s->read);
+ }
+
+ /* Wait for space to send */
+
+ for (;;) {
+ val = readl(®s->status);
+ if (!(val & BCM2835_MBOX_STATUS_WR_FULL))
+ break;
+ if (get_timer(0) >= endtime) {
+ printf("mbox: Timeout waiting for send space\n");
+ return -1;
+ }
+ }
+
+ /* Send the request */
+
+ val = BCM2835_MBOX_PACK(chan, send);
+ debug("mbox: TX raw: 0x%08x\n", val);
+ writel(val, ®s->write);
+
+ /* Wait for the response */
+
+ for (;;) {
+ val = readl(®s->status);
+ if (!(val & BCM2835_MBOX_STATUS_RD_EMPTY))
+ break;
+ if (get_timer(0) >= endtime) {
+ printf("mbox: Timeout waiting for response\n");
+ return -1;
+ }
+ }
+
+ /* Read the response */
+
+ val = readl(®s->read);
+ debug("mbox: RX raw: 0x%08x\n", val);
+
+ /* Validate the response */
+
+ if (BCM2835_MBOX_UNPACK_CHAN(val) != chan) {
+ printf("mbox: Response channel mismatch\n");
+ return -1;
+ }
+
+ *recv = BCM2835_MBOX_UNPACK_DATA(val);
+
+ return 0;
+}
+
+#ifdef DEBUG
+void dump_buf(struct bcm2835_mbox_hdr *buffer)
+{
+ u32 *p;
+ u32 words;
+ int i;
+
+ p = (u32 *)buffer;
+ words = buffer->buf_size / 4;
+ for (i = 0; i < words; i++)
+ printf(" 0x%04x: 0x%08x\n", i * 4, p[i]);
+}
+#endif
+
+int bcm2835_mbox_call_prop(u32 chan, struct bcm2835_mbox_hdr *buffer)
+{
+ int ret;
+ u32 rbuffer;
+ struct bcm2835_mbox_tag_hdr *tag;
+ int tag_index;
+
+#ifdef DEBUG
+ printf("mbox: TX buffer\n");
+ dump_buf(buffer);
+#endif
+
+ ret = bcm2835_mbox_call_raw(chan, (u32)buffer, &rbuffer);
+ if (ret)
+ return ret;
+ if (rbuffer != (u32)buffer) {
+ printf("mbox: Response buffer mismatch\n");
+ return -1;
+ }
+
+#ifdef DEBUG
+ printf("mbox: RX buffer\n");
+ dump_buf(buffer);
+#endif
+
+ /* Validate overall response status */
+
+ if (buffer->code != BCM2835_MBOX_RESP_CODE_SUCCESS) {
+ printf("mbox: Header response code invalid\n");
+ return -1;
+ }
+
+ /* Validate each tag's response status */
+
+ tag = (void *)(buffer + 1);
+ tag_index = 0;
+ while (tag->tag) {
+ if (!(tag->val_len & BCM2835_MBOX_TAG_VAL_LEN_RESPONSE)) {
+ printf("mbox: Tag %d missing val_len response bit\n",
+ tag_index);
+ return -1;
+ }
+ /*
+ * Clear the reponse bit so clients can just look right at the
+ * length field without extra processing
+ */
+ tag->val_len &= ~BCM2835_MBOX_TAG_VAL_LEN_RESPONSE;
+ tag = (void *)(((u8 *)tag) + sizeof(*tag) + tag->val_buf_size);
+ tag_index++;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/mach-bcm283x/reset.c b/arch/arm/mach-bcm283x/reset.c
new file mode 100644
index 0000000..8c37ad9
--- /dev/null
+++ b/arch/arm/mach-bcm283x/reset.c
@@ -0,0 +1,35 @@
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/wdog.h>
+
+#define RESET_TIMEOUT 10
+
+void reset_cpu(ulong addr)
+{
+ struct bcm2835_wdog_regs *regs =
+ (struct bcm2835_wdog_regs *)BCM2835_WDOG_PHYSADDR;
+ uint32_t rstc;
+
+ rstc = readl(®s->rstc);
+ rstc &= ~BCM2835_WDOG_RSTC_WRCFG_MASK;
+ rstc |= BCM2835_WDOG_RSTC_WRCFG_FULL_RESET;
+
+ writel(BCM2835_WDOG_PASSWORD | RESET_TIMEOUT, ®s->wdog);
+ writel(BCM2835_WDOG_PASSWORD | rstc, ®s->rstc);
+}
diff --git a/arch/arm/mach-bcm283x/timer.c b/arch/arm/mach-bcm283x/timer.c
new file mode 100644
index 0000000..017907c
--- /dev/null
+++ b/arch/arm/mach-bcm283x/timer.c
@@ -0,0 +1,58 @@
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/timer.h>
+
+ulong get_timer_us(ulong base)
+{
+ struct bcm2835_timer_regs *regs =
+ (struct bcm2835_timer_regs *)BCM2835_TIMER_PHYSADDR;
+
+ return readl(®s->clo) - base;
+}
+
+ulong get_timer(ulong base)
+{
+ ulong us = get_timer_us(0);
+ us /= (1000000 / CONFIG_SYS_HZ);
+ us -= base;
+ return us;
+}
+
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+ulong get_tbclk(void)
+{
+ return CONFIG_SYS_HZ;
+}
+
+void __udelay(unsigned long usec)
+{
+ ulong endtime;
+ signed long diff;
+
+ endtime = get_timer_us(0) + usec;
+
+ do {
+ ulong now = get_timer_us(0);
+ diff = endtime - now;
+ } while (diff >= 0);
+}