Fix style issues primarily in 85xx and 83xx boards.
- C++ comments
- Trailing white space
- Indentation not by TAB
- Excessive amount of empty lines
- Trailing empty lines
diff --git a/CHANGELOG b/CHANGELOG
index e827895..281072e 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,6 +1,14 @@
======================================================================
Changes for U-Boot 1.1.3:
======================================================================
+* Patch by Jon Loeliger
+ Fix style issues primarily in 85xx and 83xx boards.
+ - C++ comments
+ - Trailing white space
+ - Indentation not by TAB
+ - Excessive amount of empty lines
+ - Trailing empty lines
+
* Patch by Ron Alder, 11 July 2005
Add Xianghua Xiao and Lunsheng Wang's support for the
GDA MPC8540 EVAL board.
diff --git a/board/mpc8349ads/mpc8349ads.c b/board/mpc8349ads/mpc8349ads.c
index 40400f3..da8d3d7 100644
--- a/board/mpc8349ads/mpc8349ads.c
+++ b/board/mpc8349ads/mpc8349ads.c
@@ -53,7 +53,6 @@
#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
-
long int initdram (int board_type)
{
volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
@@ -148,7 +147,7 @@
return 0;
}
-#if defined(CONFIG_PCI) //copy from mpc85xx
+#if defined(CONFIG_PCI)
/*
* Initialize PCI Devices, report devices found
*/
@@ -190,8 +189,8 @@
}
/*
-if MPC8349ADS is soldered with SDRAM
-*/
+ * if MPC8349ADS is soldered with SDRAM
+ */
#if defined(CFG_BR2_PRELIM) \
&& defined(CFG_OR2_PRELIM) \
&& defined(CFG_LBLAWBAR2_PRELIM) \
@@ -207,7 +206,6 @@
volatile lbus8349_t *lbc= &immap->lbus;
uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
-
puts("\n SDRAM on Local Bus: ");
print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
@@ -233,32 +231,33 @@
lbc->lsdmr = CFG_LBC_LSDMR_2;/*0x48636733;auto refresh*/
asm("sync");
-/*1 times*/
+ /*1 times*/
*sdram_addr = 0xff;
udelay(100);
-/*2 times*/
+ /*2 times*/
*sdram_addr = 0xff;
udelay(100);
-/*3 times*/
+ /*3 times*/
*sdram_addr = 0xff;
udelay(100);
-/*4 times*/
+ /*4 times*/
*sdram_addr = 0xff;
udelay(100);
-/*5 times*/
+ /*5 times*/
*sdram_addr = 0xff;
udelay(100);
-/*6 times*/
+ /*6 times*/
*sdram_addr = 0xff;
udelay(100);
-/*7 times*/
+ /*7 times*/
*sdram_addr = 0xff;
udelay(100);
-/*8 times*/
+ /*8 times*/
*sdram_addr = 0xff;
udelay(100);
- lbc->lsdmr = CFG_LBC_LSDMR_4; /*0x58636733;mode register write operation*/
+ /* 0x58636733;mode register write operation */
+ lbc->lsdmr = CFG_LBC_LSDMR_4;
asm("sync");
*sdram_addr = 0xff;
udelay(100);
@@ -275,4 +274,3 @@
put("SDRAM on Local Bus is NOT available!\n");
}
#endif
-
diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c
index c90dbc7..3b3c8ed 100644
--- a/board/mpc8540eval/mpc8540eval.c
+++ b/board/mpc8540eval/mpc8540eval.c
@@ -23,34 +23,15 @@
* MA 02111-1307 USA
*/
-
-extern long int spd_sdram (void);
-
#include <common.h>
#include <asm/processor.h>
#include <asm/immap_85xx.h>
#include <spd.h>
-
+extern long int spd_sdram (void);
long int fixed_sdram (void);
-/* MPC8540ADS Board Status & Control Registers */
-#if 0
-typedef struct bscr_ {
- unsigned long bcsr0;
- unsigned long bcsr1;
- unsigned long bcsr2;
- unsigned long bcsr3;
- unsigned long bcsr4;
- unsigned long bcsr5;
- unsigned long bcsr6;
- unsigned long bcsr7;
-} bcsr_t;
-#endif
-
-
-
int board_pre_init (void)
{
#if defined(CONFIG_PCI)
@@ -74,7 +55,8 @@
printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \
|| (CFG_LBC_LCRR & 0x0f) == 8) {
- printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000 /(CFG_LBC_LCRR & 0x0f));
+ printf ("\tLBC: %lu MHz\n",
+ sysinfo.freqSystemBus / 1000000/(CFG_LBC_LCRR & 0x0f));
} else {
printf("\tLBC: unknown\n");
}
@@ -199,7 +181,6 @@
return dram_size;
}
-
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
@@ -234,14 +215,13 @@
}
#endif
-
#if !defined(CONFIG_SPD_EEPROM)
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.
************************************************************************/
long int fixed_sdram (void)
{
- #ifndef CFG_RAMBOOT
+#ifndef CFG_RAMBOOT
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_ddr_t *ddr= &immap->im_ddr;
@@ -251,21 +231,21 @@
ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
ddr->sdram_mode = CFG_DDR_MODE;
ddr->sdram_interval = CFG_DDR_INTERVAL;
- #if defined (CONFIG_DDR_ECC)
+#if defined (CONFIG_DDR_ECC)
ddr->err_disable = 0x0000000D;
ddr->err_sbe = 0x00ff0000;
- #endif
+#endif
asm("sync;isync;msync");
udelay(500);
- #if defined (CONFIG_DDR_ECC)
+#if defined (CONFIG_DDR_ECC)
/* Enable ECC checking */
ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
- #else
+#else
ddr->sdram_cfg = CFG_DDR_CONTROL;
- #endif
+#endif
asm("sync; isync; msync");
udelay(500);
- #endif
+#endif
return (CFG_SDRAM_SIZE * 1024 * 1024);
}
#endif /* !defined(CONFIG_SPD_EEPROM) */
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index a0ccdb6..162d1ff 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -101,7 +101,7 @@
* erase and protect commands. The range of the addresses on which
* either of the commands is to operate can be given in two forms:
* 1. <cmd> start end - operate on <'start', 'end')
- * 2. <cmd> start +length - operate on <'start', start + length)
+ * 2. <cmd> start +length - operate on <'start', start + length)
* If the second form is used and the end address doesn't fall on the
* sector boundary, than it will be adjusted to the next sector boundary.
* If it isn't in the flash, the function will fail (return -1).
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index 3af8619..0738f55 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -455,9 +455,8 @@
i = usb_init();
#ifdef CONFIG_USB_STORAGE
/* try to recognize storage devices immediately */
- if (i >= 0)
+ if (i >= 0)
usb_stor_curr_dev = usb_stor_scan(1);
-
#endif
return 0;
}
diff --git a/common/usb.c b/common/usb.c
index 1738d95..811ed24 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -47,7 +47,7 @@
#endif
-#undef USB_DEBUG
+#undef USB_DEBUG
#ifdef USB_DEBUG
#define USB_PRINTF(fmt,args...) printf (fmt ,##args)
@@ -342,7 +342,7 @@
if (result < 0)
return result;
- /*
+ /*
* NOTE: we do not get status and verify reset was successful
* as some devices are reported to lock up upon this check..
*/
@@ -517,13 +517,12 @@
/* some devices are flaky */
result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
- (USB_DT_STRING << 8) + index, langid, buf, size,
+ (USB_DT_STRING << 8) + index, langid, buf, size,
USB_CNTL_TIMEOUT);
if (result > 0)
break;
- }
-
+ }
return result;
}
@@ -572,7 +571,7 @@
}
if (rc < 2)
- rc = -1;
+ rc = -1;
return rc;
}
@@ -721,10 +720,9 @@
}
}
dev->descriptor.bMaxPacketSize0 = desc->bMaxPacketSize0;
-
+
/* find the port number we're at */
if (parent) {
-
for (j = 0; j < parent->maxchild; j++) {
if (parent->children[j] == dev) {
port = j;
@@ -958,7 +956,6 @@
return -1;
if (portstatus & USB_PORT_STAT_ENABLE) {
-
break;
}
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 5397bb2..6cf62e4 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -229,7 +229,7 @@
}
if(usb_storage_probe(dev,0,&usb_stor[usb_max_devs])) { /* ok, it is a storage devices */
/* get info and fill it in */
- if(usb_stor_get_info(dev, &usb_stor[usb_max_devs], &usb_dev_desc[usb_max_devs]))
+ if(usb_stor_get_info(dev, &usb_stor[usb_max_devs], &usb_dev_desc[usb_max_devs]))
usb_max_devs++;
} /* if storage device */
if(usb_max_devs==USB_MAX_STOR_DEV) {
@@ -237,7 +237,7 @@
break;
}
} /* for */
-
+
usb_disable_asynch(0); /* asynch transfer allowed */
printf("%d Storage Device(s) found\n", usb_max_devs);
if(usb_max_devs>0)
@@ -656,7 +656,7 @@
retry = 0;
again:
USB_STOR_PRINTF("STATUS phase\n");
- result = usb_bulk_msg(us->pusb_dev, pipein, &csw, UMASS_BBB_CSW_SIZE,
+ result = usb_bulk_msg(us->pusb_dev, pipein, &csw, UMASS_BBB_CSW_SIZE,
&actlen, USB_CNTL_TIMEOUT*5);
/* special handling of STALL in STATUS phase */
@@ -1134,7 +1134,7 @@
dev->descriptor.idProduct == 0x2010)
)
USB_STOR_PRINTF("usb_stor_get_info: skipping RESET..\n");
- else
+ else
ss->transport_reset(ss);
pccb->pdata = usb_stor_buf;
@@ -1145,7 +1145,7 @@
if(usb_inquiry(pccb,ss))
return -1;
-
+
perq = usb_stor_buf[0];
modi = usb_stor_buf[1];
if((perq & 0x1f) == 0x1f) {
diff --git a/cpu/arm920t/s3c24x0/usb_ohci.c b/cpu/arm920t/s3c24x0/usb_ohci.c
index fa6abeb..eb80b1c 100644
--- a/cpu/arm920t/s3c24x0/usb_ohci.c
+++ b/cpu/arm920t/s3c24x0/usb_ohci.c
@@ -53,7 +53,6 @@
#define OHCI_USE_NPS /* force NoPowerSwitching mode */
#undef OHCI_VERBOSE_DEBUG /* not always helpful */
-
/* For initializing controller (mask in an HCFS mode too) */
#define OHCI_CONTROL_INIT \
(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
@@ -1221,7 +1220,6 @@
}
-
/*-------------------------------------------------------------------------*/
/* common code for handling submit messages - used for all but root hub */
@@ -1294,7 +1292,7 @@
wait_ms(1);
if (!urb_finished)
dbg("\%");
-
+
} else {
err("CTL:TIMEOUT ");
dbg("submit_common_msg: TO status %x\n", stat);
@@ -1511,7 +1509,7 @@
ohci->disabled++;
err ("%s device removed!", ohci->slot_name);
return -1;
-
+
} else if ((ints &= readl (®s->intrenable)) == 0) {
dbg("hc_interrupt: returning..\n");
return 0xff;
diff --git a/cpu/mpc5xxx/usb_ohci.c b/cpu/mpc5xxx/usb_ohci.c
index 2f19d7e..c774da3 100644
--- a/cpu/mpc5xxx/usb_ohci.c
+++ b/cpu/mpc5xxx/usb_ohci.c
@@ -1261,7 +1261,7 @@
stat = USB_ST_CRC_ERR;
break;
}
-
+
/* NOTE: since we are not interrupt driven in U-Boot and always
* handle only one URB at a time, we cannot assume the
* transaction finished on the first successful return from
@@ -1483,7 +1483,7 @@
struct ohci_regs *regs = ohci->regs;
int ints;
int stat = -1;
-
+
if ((ohci->hcca->done_head != 0) &&
!(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) {
@@ -1493,7 +1493,7 @@
ohci->disabled++;
err ("%s device removed!", ohci->slot_name);
return -1;
-
+
} else if ((ints &= readl (®s->intrenable)) == 0) {
dbg("hc_interrupt: returning..\n");
return 0xff;
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 7e80ced..dcb3445 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -161,4 +161,3 @@
{
return 0;
}
-
diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c
index d9daa3e..d5fa811 100644
--- a/cpu/mpc83xx/pci.c
+++ b/cpu/mpc83xx/pci.c
@@ -45,12 +45,12 @@
pci_mpc83xx_init(volatile struct pci_controller *hose)
{
volatile immap_t * immr;
- volatile clk8349_t * clk;
+ volatile clk8349_t * clk;
volatile law8349_t * pci_law;
volatile pot8349_t * pci_pot;
volatile pcictrl8349_t * pci_ctrl;
volatile pciconf8349_t * pci_conf;
-
+
u8 val8,tmp8,ret;
u16 reg16,tmp16;
u32 val32,tmp32;
@@ -69,7 +69,7 @@
udelay(2000);
clk->occr = 0xff000000;
udelay(2000);
-
+
/*
* Configure PCI Local Access Windows
*/
@@ -89,7 +89,7 @@
pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK);
-//#if defined(CONFIG_PCI_2)
+
pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
pci_pot[3].pocmr = POCMR_EN | POCMR_DST | (POCMR_CM_512M & POCMR_CM_MASK);
@@ -98,8 +98,7 @@
pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
pci_pot[4].pocmr = POCMR_EN | POCMR_DST | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK);
-//#endif
-
+
/*
* Configure PCI Inbound Translation Windows
*/
@@ -131,13 +130,13 @@
val8 = 0x34;
ret = i2c_write(0x26,0x7,1,&val8,1);
#if defined(PCI_64BIT)
- val8 = 0xf4; // PMC2<->PCI1 64bit
+ val8 = 0xf4; /* PMC2<->PCI1 64bit */
#elif defined(PCI_ALL_PCI1)
- val8 = 0xf3; // PMC1<->PCI1,PMC2<->PCI1,PMC3<->PCI1 32bit
+ val8 = 0xf3; /* PMC1<->PCI1,PMC2<->PCI1,PMC3<->PCI1 32bit */
#elif defined(PCI_ONE_PCI1)
- val8 = 0xf9; // PMC1<->PCI1,PMC2<->PCI2,PMC3<->PCI2 32bit
+ val8 = 0xf9; /* PMC1<->PCI1,PMC2<->PCI2,PMC3<->PCI2 32bit */
#elif defined(PCI_TWO_PCI1)
- val8 = 0xf5; // PMC1<->PCI1,PMC2<->PCI1,PMC3<->PCI2 32bit
+ val8 = 0xf5; /* PMC1<->PCI1,PMC2<->PCI1,PMC3<->PCI2 32bit */
#else
val8 = 0xf5;
#endif
@@ -160,7 +159,7 @@
pci_ctrl[0].gcr = 1;
#ifndef PCI_64BIT
pci_ctrl[1].gcr = 1;
-#endif
+#endif
udelay(2000);
hose[0].first_busno = 0;
@@ -186,7 +185,7 @@
#define PCI_CLASS_BRIDGE 0x06
reg16 = 0xff;
tmp32 = 0xffff;
- pci_hose_write_config_byte(&hose[0],PCI_BDF(0,0,0),PCI_CLASS_CODE,PCI_CLASS_BRIDGE);
+ pci_hose_write_config_byte(&hose[0],PCI_BDF(0,0,0),PCI_CLASS_CODE,PCI_CLASS_BRIDGE);
pci_hose_read_config_word (&hose[0],PCI_BDF(0,0,0),PCI_COMMAND, ®16);
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
@@ -219,7 +218,7 @@
(CFG_IMMRBAR+0x8380),
(CFG_IMMRBAR+0x8384));
- pci_hose_write_config_byte(&hose[1],PCI_BDF(0,0,0),PCI_CLASS_CODE,PCI_CLASS_BRIDGE);
+ pci_hose_write_config_byte(&hose[1],PCI_BDF(0,0,0),PCI_CLASS_CODE,PCI_CLASS_BRIDGE);
pci_hose_read_config_word (&hose[1],PCI_BDF(0,0,0), PCI_COMMAND, ®16);
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
pci_hose_write_config_word(&hose[1],PCI_BDF(0,0,0), PCI_COMMAND, reg16);
diff --git a/cpu/mpc83xx/resetvec.S b/cpu/mpc83xx/resetvec.S
index 7593e73..3dfcd0d 100644
--- a/cpu/mpc83xx/resetvec.S
+++ b/cpu/mpc83xx/resetvec.S
@@ -2,5 +2,5 @@
#ifndef FIXME
#if 0
b _start_e500
-#endif
+#endif
#endif
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 5bd112c..63dcd66 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -36,20 +36,16 @@
#ifdef CONFIG_SPD_EEPROM
-
#if defined(CONFIG_DDR_ECC)
extern void dma_init(void);
extern uint dma_check(void);
extern int dma_xfer(void *dest, uint count, void *src);
#endif
-
#ifndef CFG_READ_SPD
#define CFG_READ_SPD i2c_read
#endif
-
-
/*
* Convert picoseconds into clock cycles (rounding up if needed).
*/
@@ -67,14 +63,12 @@
return clks;
}
-
unsigned int
banksize(unsigned char row_dens)
{
return ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24;
}
-
long int spd_sdram(int(read_spd)(uint addr))
{
volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
@@ -86,8 +80,8 @@
unsigned int law_size;
unsigned char caslat;
unsigned int trfc, trfc_clk, trfc_low;
-
-#warning Current spd_sdram does not fit its usage... adjust implementation or API...
+
+#warning Current spd_sdram does not fit its usage... adjust implementation or API...
CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
@@ -111,7 +105,7 @@
debug("\n");
debug("cs2_bnds = 0x%08x\n",ddr->csbnds[2].csbnds);
debug("cs2_config = 0x%08x\n",ddr->cs_config[2]);
-
+
if (spd.nrows == 2) {
ddr->csbnds[3].csbnds = ( (banksize(spd.row_dens) >> 8)
| ((banksize(spd.row_dens) >> 23) - 1) );
@@ -298,9 +292,12 @@
udelay(500);
-
- ddr->sdram_clk_cntl = 0x82000000;/*SS_EN=1, CLK_ADJST = 2-MCK/MCK_B, is lauched 1/2 of one SDRAM clock cycle after address/command*/
-
+ /*
+ * SS_EN=1,
+ * CLK_ADJST = 2-MCK/MCK_B, is lauched 1/2 of one SDRAM
+ * clock cycle after address/command
+ */
+ ddr->sdram_clk_cntl = 0x82000000;
/*
* Figure out the settings for the sdram_cfg register. Build up
@@ -339,7 +336,6 @@
#endif
ddr->sdram_cfg = tmp;
-
asm("sync;isync");
udelay(500);
@@ -347,7 +343,6 @@
return memsize;/*in MBytes*/
}
-
#endif /* CONFIG_SPD_EEPROM */
@@ -407,7 +402,7 @@
*/
ddr->err_disable = 0x00000000;
asm("sync;isync");
-#endif
+#endif
}
#endif /* CONFIG_DDR_ECC */
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 6530fbf..260137d 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -101,7 +101,7 @@
u32 corecnf_tab_index;
u8 corepll;
u32 lcrr;
-
+
u32 csb_clk;
u32 tsec1_clk;
u32 tsec2_clk;
@@ -113,10 +113,10 @@
u32 lbiu_clk;
u32 lclk_clk;
u32 ddr_clk;
-
+
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
return -1;
-
+
#ifndef CFG_HRCW_HIGH
# error "CFG_HRCW_HIGH must be defined in include/configs/MCP83XXADS.h"
#endif /* CFG_HCWD_HIGH */
@@ -133,7 +133,6 @@
/* though RCWH_PCIHOST is defined in CFG_HRCW_HIGH the im->reset.rcwhr PCI Host Mode is disabled */
/* FIXME: findout if there is a way to issue some warning */
return -2;
-
}
if (im->clk.spmr & SPMR_CKID) {
pci_sync_in = CONFIG_83XX_CLKIN / 2; /* PCI Clock is half CONFIG_83XX_CLKIN */
@@ -157,17 +156,16 @@
#endif /* (CFG_HRCW_HIGH | RCWH_PCIHOST) */
/* we have up to date pci_sync_in */
-
spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT);
clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
-
+
if ((im->reset.rcwl & RCWL_LBIUCM) || (im->reset.rcwl & RCWL_DDRCM)) {
csb_clk = (pci_sync_in * spmf * (1 + clkin_div)) / 2;
}
else {
csb_clk = pci_sync_in * spmf * (1 + clkin_div);
}
-
+
sccr = im->clk.sccr;
switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
case 0:
@@ -186,7 +184,7 @@
/* unkown SCCR_TSEC1CM value */
return -4;
}
-
+
switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
case 0:
tsec2_clk = 0;
@@ -205,7 +203,7 @@
return -5;
}
i2c_clk = tsec2_clk;
-
+
switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
case 0:
enc_clk = 0;
@@ -223,7 +221,7 @@
/* unkown SCCR_ENCCM value */
return -6;
}
-
+
switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
case 0:
usbmph_clk = 0;
@@ -259,14 +257,14 @@
/* unkown SCCR_USBDRCM value */
return -8;
}
-
+
if (usbmph_clk != 0
&& usbdr_clk != 0
&& usbmph_clk != usbdr_clk ) {
/* if USB MPH clock is not disabled and USB DR clock is not disabled than USB MPH & USB DR must have the same rate */
return -9;
}
-
+
lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
switch (lcrr) {
@@ -279,9 +277,9 @@
/* unknown lcrr */
return -10;
}
-
+
ddr_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT));
-
+
corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT;
corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
if (corecnf_tab_index > (sizeof(corecnf_tab)/sizeof(corecnf_t)) ) {
@@ -310,7 +308,7 @@
/* unkown core to csb ratio */
return -12;
}
-
+
gd->csb_clk = csb_clk ;
gd->tsec1_clk = tsec1_clk ;
gd->tsec2_clk = tsec2_clk ;
@@ -318,11 +316,11 @@
gd->usbmph_clk = usbmph_clk;
gd->usbdr_clk = usbdr_clk ;
gd->i2c_clk = i2c_clk ;
- gd->enc_clk = enc_clk ;
+ gd->enc_clk = enc_clk ;
gd->lbiu_clk = lbiu_clk ;
gd->lclk_clk = lclk_clk ;
gd->ddr_clk = ddr_clk ;
-
+
gd->cpu_clk = gd->core_clk;
gd->bus_clk = gd->lbiu_clk;
return 0;
@@ -341,7 +339,7 @@
int print_clock_conf (void)
{
DECLARE_GLOBAL_DATA_PTR;
-
+
printf("Clock configuration:\n");
printf(" Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000);
printf(" Core: %4d MHz\n",gd->core_clk/1000000);
@@ -353,7 +351,7 @@
printf(" TSEC2: %4d MHz\n",gd->tsec2_clk/1000000);
printf(" USB MPH: %4d MHz\n",gd->usbmph_clk/1000000);
printf(" USB DR: %4d MHz\n",gd->usbdr_clk/1000000);
-
+
#if 0
DECLARE_GLOBAL_DATA_PTR;
@@ -419,6 +417,5 @@
}
putc ('\n');
#endif
- return (0);
+ return 0;
}
-
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index e9f0790..fb001a6 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -28,7 +28,7 @@
*/
#include <config.h>
-#include <mpc83xx.h>
+#include <mpc83xx.h>
#include <version.h>
#define CONFIG_83XX 1 /* needed for Linux kernel header files*/
@@ -89,7 +89,7 @@
.ascii U_BOOT_VERSION
.ascii " (", __DATE__, " - ", __TIME__, ")"
.ascii " ", CONFIG_IDENT_STRING, "\0"
-
+
.text
#define _HRCW_TABLE_ENTRY(w) \
.fill 8,1,(((w)>>24)&0xff); \
@@ -101,7 +101,6 @@
_HRCW_TABLE_ENTRY(CFG_HRCW_HIGH)
-
#ifndef CONFIG_DEFAULT_IMMR
#error CONFIG_DEFAULT_IMMR must be defined
#endif /* CFG_DEFAULT_IMMR */
@@ -143,7 +142,7 @@
. = EXC_OFF_SYS_RESET + 0x10
.globl _start_warm
-_start_warm:
+_start_warm:
li r21, BOOTFLAG_WARM /* Software reboot */
b boot_warm
@@ -156,12 +155,12 @@
lis r3, CFG_IMMRBAR@h
ori r3, r3, CFG_IMMRBAR@l
stw r3, IMMRBAR(r4)
-
+
/* Initialise the E300 processor core */
/*------------------------------------------*/
-
+
bl init_e300_core
-
+
#ifndef CFG_RAMBOOT
/* Inflate flash location so it appears everywhere, calculate */
@@ -218,7 +217,7 @@
/* External Interrupt exception. */
#ifndef FIXME
STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-#endif
+#endif
/* Alignment exception. */
. = 0x600
@@ -417,9 +416,9 @@
lis r4, CFG_WATCHDOG_VALUE
ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
stw r4, SWCRR(r3)
-
+
/* and reset it */
-
+
li r4, 0x556C
sth r4, SWSRR@l(r3)
li r4, 0xAA39
@@ -502,7 +501,7 @@
/* Done! */
/*------------------------------*/
- blr
+ blr
/* Cache functions.
*
@@ -645,8 +644,8 @@
mtctr r0
la r8,-4(r4)
la r7,-4(r3)
-
- /* and compare */
+
+ /* and compare */
20: lwzu r20,4(r8)
lwzu r21,4(r7)
xor. r22, r20, r21
@@ -664,21 +663,19 @@
3: lwzu r0,-4(r8)
stwu r0,-4(r7)
bdnz 3b
-
-
/*
* Now flush the cache: note that we must start from a cache aligned
* address. Otherwise we might miss one cache line.
*/
-4:
+4:
bl un_setup_stack_in_data_cache
mr r7, r3
mr r8, r4
bl dcache_disable
mr r3, r7
mr r4, r8
-
+
cmpwi r6,0
add r5,r3,r5
beq 7f /* Always flush prefetch queue in any case */
@@ -889,9 +886,9 @@
/* Address Mask in OR0 so ROM appears everywhere */
/*----------------------------------------------------*/
lis r3, (CFG_IMMRBAR)@h /* r3 <= CFG_IMMRBAR */
- lwz r4, OR0@l(r3)
+ lwz r4, OR0@l(r3)
li r5, 0x7fff /* r5 <= 0x00007FFFF */
- and r4, r4, r5
+ and r4, r4, r5
stw r4, OR0@l(r3) /* OR0 <= OR0 & 0x00007FFFF */
/* As MPC8349E User's Manual presented, when RCW[BMS] is set to 0,
@@ -926,9 +923,9 @@
/* Initialize the BR0 with the boot ROM starting address. */
lwz r4, BR0(r3)
li r5, 0x7FFF
- and r4, r4, r5
+ and r4, r4, r5
lis r5, (CFG_FLASH_BASE & 0xFFFF8000)@h
- ori r5, r5, (CFG_FLASH_BASE & 0xFFFF8000)@l
+ ori r5, r5, (CFG_FLASH_BASE & 0xFFFF8000)@l
or r5, r5, r4
stw r5, BR0(r3) /* r5 <= (CFG_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
@@ -950,9 +947,9 @@
stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
blr
-setup_stack_in_data_cache_on_r1:
+setup_stack_in_data_cache_on_r1:
lis r3, (CFG_IMMRBAR)@h
-
+
/* setup D-BAT for the D-Cache (with out real memory backup) */
lis r4, (CFG_INIT_RAM_ADDR & 0xFFFE0000)@h
@@ -961,13 +958,13 @@
mtspr DBAT0L, r4
isync
-#if 0
+#if 0
/* Enable MMU */
mfmsr r4
ori r4, r4, (MSR_DR | MSR_IR)@l
mtmsr r4
-#endif
-
+#endif
+
/* Enable and invalidate data cache. */
mfspr r4, HID0
mr r5, r4
@@ -977,19 +974,19 @@
mtspr HID0, r4
mtspr HID0, r5
sync
-
+
/* Allocate Initial RAM in data cache.*/
li r0, 0
lis r4, (CFG_INIT_RAM_ADDR)@h
ori r4, r4, (CFG_INIT_RAM_ADDR)@l
- li r5, 128*8 /* 128*8*32=32Kb */
+ li r5, 128*8 /* 128*8*32=32Kb */
mtctr r5
1:
dcbz r0, r4
addi r4, r4, 32
bdnz 1b
isync
-
+
/* Lock all the D-cache, basically leaving the reset of the program without dcache */
mfspr r4, HID0
ori r4, r4, (HID0_DLOCK)@l
@@ -1010,14 +1007,14 @@
blr
mr r14, r4
mr r15, r5
-
+
lis r4, (CFG_INIT_RAM_ADDR & 0xFFFE0000)@h
mtspr DBAT0U, r4
ori r4, r4, 0x0002
mtspr DBAT0L, r4
isync
-
+
/* un lock all the D-cache */
mfspr r4, HID0
lis r5, (~(HID0_DLOCK))@h
@@ -1030,20 +1027,20 @@
li r0, 0
lis r4, (CFG_INIT_RAM_ADDR)@h
ori r4, r4, (CFG_INIT_RAM_ADDR)@l
- li r5, 128*8 /* 128*8*32=32Kb */
+ li r5, 128*8 /* 128*8*32=32Kb */
mtctr r5
1:
dcbz r0, r4
addi r4, r4, 32
bdnz 1b
isync
-
+
mflr r16
bl dcache_disable
mtlr r16
-
+
blr
-
+
#if 0
#define GREEN_LIGHT 0x2B0D4046
#define RED_LIGHT 0x250D4046
@@ -1054,7 +1051,7 @@
*/
.globl liblight
-liblight:
+liblight:
lis r3, CFG_IMMRBAR@h
ori r3, r3, CFG_IMMRBAR@l
li r4, 0x3002
@@ -1063,7 +1060,7 @@
mtspr HID0, r4
mtspr HID2, r4
lis r4, 0xF8000000@h
- ori r4, r4, 0xF8000000@l
+ ori r4, r4, 0xF8000000@l
stw r4, LBLAWBAR1(r3)
lis r4, 0x8000000E@h
ori r4, r4, 0x8000000E@l
@@ -1083,14 +1080,14 @@
ori r6, r6, RED_LIGHT@l
lis r7, LIB_CNT@h
ori r7, r7, LIB_CNT@l
-
+
1:
stw r5, 0(r4)
- mtctr r7
+ mtctr r7
2: bdnz 2b
stw r6, 0(r4)
- mtctr r7
+ mtctr r7
3: bdnz 3b
b 1b
-
+
#endif
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index 049ba67..af99282 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -630,7 +630,7 @@
ddr->timing_cfg_2 = (0
| ((add_lat & 0x7) << 28) /* ADD_LAT */
- | ((cpo & 0x1f) << 23) /* CPO */
+ | ((cpo & 0x1f) << 23) /* CPO */
| ((wr_lat & 0x7) << 19) /* WR_LAT */
| ((trtp_clk & 0x7) << 13) /* RD_TO_PRE */
| ((wr_data_delay & 0x7) << 10) /* WR_DATA_DELAY */
@@ -822,7 +822,7 @@
/*
* Memory will be initialized via DMA, or not at all.
*/
- d_init = 0;
+ d_init = 0;
#endif
ddr->sdram_cfg_2 = (0
diff --git a/drivers/tsec.c b/drivers/tsec.c
index f5067b3..0c8b0de 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -524,11 +524,11 @@
regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF))
| MACCFG2_MII);
- /* If We're in reduced mode, we
- * need to say whether we're 10
- * or 100 MB. */
- if ((priv->speed == 100)
- && (priv->flags & TSEC_REDUCED))
+ /* If We're in reduced mode, we need
+ * to say whether we're 10 or 100 MB.
+ */
+ if ((priv->speed == 100)
+ && (priv->flags & TSEC_REDUCED))
regs->ecntrl |= ECNTRL_R100;
else
regs->ecntrl &= ~(ECNTRL_R100);
diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h
index 3096a26..908007c 100644
--- a/include/asm-ppc/e300.h
+++ b/include/asm-ppc/e300.h
@@ -7,7 +7,7 @@
#define __E300_H__
/*
- * e300 Processor Version & Revision Numbers
+ * e300 Processor Version & Revision Numbers
*/
#define PVR_83xx 0x80830000
#define PVR_8349_REV10 (PVR_83xx | 0x0010)
@@ -16,7 +16,7 @@
/*
* Hardware Implementation-Dependent Register 0 (HID0)
*/
-
+
/* #define HID0 1008 already defined in processor.h */
#define HID0_MASK_MACHINE_CHECK 0x00000000
#define HID0_ENABLE_MACHINE_CHECK 0x80000000
diff --git a/include/asm-ppc/i2c.h b/include/asm-ppc/i2c.h
index e7ec9aa..2a4ac0f 100644
--- a/include/asm-ppc/i2c.h
+++ b/include/asm-ppc/i2c.h
@@ -36,13 +36,12 @@
#define I2C_ADR 0xFE
#define I2C_ADR_SHIFT 1
#define I2C_ADR_RES ~(I2C_ADR)
- u8 res0[3];
+ u8 res0[3];
u8 fdr; /**< I2C frequency divider register */
-
#define IC2_FDR 0x3F
#define IC2_FDR_SHIFT 0
#define IC2_FDR_RES ~(IC2_FDR)
- u8 res1[3];
+ u8 res1[3];
u8 cr; /**< I2C control redister */
#define I2C_CR_MEN 0x80
#define I2C_CR_MIEN 0x40
@@ -51,7 +50,7 @@
#define I2C_CR_TXAK 0x08
#define I2C_CR_RSTA 0x04
#define I2C_CR_BCST 0x01
- u8 res2[3];
+ u8 res2[3];
u8 sr; /**< I2C status register */
#define I2C_SR_MCF 0x80
#define I2C_SR_MAAS 0x40
@@ -61,18 +60,18 @@
#define I2C_SR_SRW 0x04
#define I2C_SR_MIF 0x02
#define I2C_SR_RXAK 0x01
- u8 res3[3];
+ u8 res3[3];
u8 dr; /**< I2C data register */
#define I2C_DR 0xFF
#define I2C_DR_SHIFT 0
#define I2C_DR_RES ~(I2C_DR)
- u8 res4[3];
+ u8 res4[3];
u8 dfsrr; /**< I2C digital filter sampling rate register */
#define I2C_DFSRR 0x3F
#define I2C_DFSRR_SHIFT 0
#define I2C_DFSRR_RES ~(I2C_DR)
u8 res5[3];
- u8 res6[0xE8];
+ u8 res6[0xE8];
} i2c_t;
#ifndef CFG_HZ
@@ -89,8 +88,8 @@
#endif
#ifdef CONFIG_MPC8349ADS
-/*
- * MPC8349 have two i2c bus
+/*
+ * MPC8349 have two i2c bus
*/
extern i2c_t * mpc8349_i2c;
#define I2C mpc8349_i2c
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index e894cda..5d284d4 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -2,7 +2,7 @@
* MPC8349 Internal Memory Map
* Copyright (c) 2004 Freescale Semiconductor.
* Eran Liberty (liberty@freescale.com)
- *
+ *
* based on:
* - MPC8260 Internal Memory Map
* Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
@@ -16,20 +16,32 @@
#include <asm/types.h>
#include <asm/i2c.h>
-/*
+/*
* Local Access Window.
*/
typedef struct law8349 {
u32 bar; /* LBIU local access window base address register */
-#define LAWBAR_BAR 0xFFFFF000 /* Identifies the 20 most-significant address bits of the base of local access window n. The specified base address should be aligned to the window size, as defined by LBLAWARn[SIZE]. */
+/* Identifies the 20 most-significant address bits of the base of local
+ * access window n. The specified base address should be aligned to the
+ * window size, as defined by LBLAWARn[SIZE].
+ */
+#define LAWBAR_BAR 0xFFFFF000
#define LAWBAR_RES ~(LAWBAR_BAR)
u32 ar; /* LBIU local access window attribute register */
/*
* This Macro were moved into mmu.h
*/
-#if 0
-#define LAWAR_EN 0x80000000 /* 0 The local bus local access window n is disabled. 1 The local bus local access window n is enabled and other LBLAWAR0 and LBLAWBAR0 fields combine to identify an address range for this window. */
-#define LAWAR_SIZE 0x0000003F /* Identifies the size of the window from the starting address. Window size is 2^(SIZE+1) bytes. 000000–001010Reserved. Window is undefined. */
+#if 0
+/* 0 The local bus local access window n is disabled. 1 The local bus
+ * local access window n is enabled and other LBLAWAR0 and LBLAWBAR0 fields
+ * combine to identify an address range for this window.
+ */
+#define LAWAR_EN 0x80000000
+/* Identifies the size of the window from the starting address. Window
+ * size is 2^(SIZE+1) bytes. 000000–001010Reserved. Window is
+ * undefined.
+ */
+#define LAWAR_SIZE 0x0000003F
#define LAWAR_SIZE_4K 0x0000000B
#define LAWAR_SIZE_8K 0x0000000C
#define LAWAR_SIZE_16K 0x0000000D
@@ -55,14 +67,17 @@
} law8349_t;
-/*
+/*
* System configuration registers.
*/
typedef struct sysconf8349 {
u32 immrbar; /* Internal memory map base address register */
u8 res0[0x04];
u32 altcbar; /* Alternate configuration base address register */
-#define ALTCBAR_BASE_ADDR 0xFFF00000 /* Identifies the12 most significant address bits of an alternate base address used for boot sequencer configuration accesses. */
+/* Identifies the12 most significant address bits of an alternate base
+ * address used for boot sequencer configuration accesses.
+ */
+#define ALTCBAR_BASE_ADDR 0xFFF00000
#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */
u8 res1[0x14];
law8349_t lblaw[4]; /* LBIU local access window */
@@ -77,7 +92,7 @@
#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */
#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */
u8 res5[0x04];
- u32 spcr; /* System Priority Configuration Register */
+ u32 spcr; /* System Priority Configuration Register */
#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */
#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority. */
#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable. */
@@ -88,8 +103,9 @@
#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority. */
#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */
#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority. */
-#define SPCR_RES ~(SPCR_PCIHPE|SPCR_PCIPR|SPCR_TBEN|SPCR_COREPR|SPCR_TSEC1DP \
- |SPCR_TSEC1BDP|SPCR_TSEC1EP|SPCR_TSEC2DP|SPCR_TSEC2BDP|SPCR_TSEC2EP)
+#define SPCR_RES ~(SPCR_PCIHPE | SPCR_PCIPR | SPCR_TBEN | SPCR_COREPR \
+ | SPCR_TSEC1DP | SPCR_TSEC1BDP | SPCR_TSEC1EP \
+ | SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP)
u32 sicrl; /* System General Purpose Register Low */
#define SICRL_LDP_A 0x80000000
#define SICRL_USB0 0x40000000
@@ -107,10 +123,11 @@
#define SICRL_GPIO1_J 0x00008000
#define SICRL_GPIO1_K 0x00004000
#define SICRL_GPIO1_L 0x00003000
-#define SICRL_RES ~(SICRL_LDP_A|SICRL_USB0|SICRL_USB1|SICRL_UART|SICRL_GPIO1_A \
- |SICRL_GPIO1_B|SICRL_GPIO1_C|SICRL_GPIO1_D|SICRL_GPIO1_E \
- |SICRL_GPIO1_F|SICRL_GPIO1_G|SICRL_GPIO1_H|SICRL_GPIO1_I \
- |SICRL_GPIO1_J|SICRL_GPIO1_K|SICRL_GPIO1_L )
+#define SICRL_RES ~(SICRL_LDP_A | SICRL_USB0 | SICRL_USB1 | SICRL_UART \
+ | SICRL_GPIO1_A | SICRL_GPIO1_B | SICRL_GPIO1_C \
+ | SICRL_GPIO1_D | SICRL_GPIO1_E | SICRL_GPIO1_F \
+ | SICRL_GPIO1_G | SICRL_GPIO1_H | SICRL_GPIO1_I \
+ | SICRL_GPIO1_J | SICRL_GPIO1_K | SICRL_GPIO1_L )
u32 sicrh; /* System General Purpose Register High */
#define SICRH_DDR 0x80000000
#define SICRH_TSEC1_A 0x10000000
@@ -137,30 +154,32 @@
#define SICRH_GPIO2_H 0x00000060
#define SICRH_TSOBI1 0x00000002
#define SICRH_TSOBI2 0x00000001
-#define SICRh_RES ~(SICRH_DDR|SICRH_TSEC1_A|SICRH_TSEC1_B|SICRH_TSEC1_C \
- |SICRH_TSEC1_D|SICRH_TSEC1_E|SICRH_TSEC1_F|SICRH_TSEC2_A \
- |SICRH_TSEC2_B|SICRH_TSEC2_C|SICRH_TSEC2_D|SICRH_TSEC2_E \
- |SICRH_TSEC2_F|SICRH_TSEC2_G|SICRH_TSEC2_H|SICRH_GPIO2_A \
- |SICRH_GPIO2_B|SICRH_GPIO2_C|SICRH_GPIO2_D|SICRH_GPIO2_E \
- |SICRH_GPIO2_F|SICRH_GPIO2_G|SICRH_GPIO2_H|SICRH_TSOBI1 \
- |SICRH_TSOBI2)
+#define SICRh_RES ~( SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \
+ | SICRH_TSEC1_C | SICRH_TSEC1_D | SICRH_TSEC1_E \
+ | SICRH_TSEC1_F | SICRH_TSEC2_A | SICRH_TSEC2_B \
+ | SICRH_TSEC2_C | SICRH_TSEC2_D | SICRH_TSEC2_E \
+ | SICRH_TSEC2_F | SICRH_TSEC2_G | SICRH_TSEC2_H \
+ | SICRH_GPIO2_A | SICRH_GPIO2_B | SICRH_GPIO2_C \
+ | SICRH_GPIO2_D | SICRH_GPIO2_E | SICRH_GPIO2_F \
+ | SICRH_GPIO2_G | SICRH_GPIO2_H | SICRH_TSOBI1 \
+ | SICRH_TSOBI2)
u8 res6[0xE4];
} sysconf8349_t;
-/*
+/*
* Watch Dog Timer (WDT) Registers
*/
typedef struct wdt8349 {
- u8 res0[4];
+ u8 res0[4];
u32 swcrr; /* System watchdog control register */
u32 swcnr; /* System watchdog count register */
#define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field.
#define SWCNR_RES ~(SWCNR_SWCN)
- u8 res1[2];
+ u8 res1[2];
u16 swsrr; /* System watchdog service register */
u8 res2[0xF0];
} wdt8349_t;
-
+
/*
* RTC/PIT Module Registers
*/
@@ -173,7 +192,7 @@
#define CNR_RES ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM)
u32 ldr; /* load register */
u32 psr; /* prescale register */
- u32 ctr; /* register */
+ u32 ctr; /* register */
u32 evr; /* event register */
#define RTEVR_SIF 0x00000001 /* Second Interrupt Flag Bit */
#define RTEVR_AIF 0x00000002 /* Alarm Interrupt Flag Bit */
@@ -187,7 +206,7 @@
*/
typedef struct gtm8349 {
- u8 cfr1; /* Timer1/2 Configuration */
+ u8 cfr1; /* Timer1/2 Configuration */
#define CFR1_PCAS 0x80 /* Pair Cascade mode */
#define CFR1_BCM 0x40 /* Backward compatible mode */
#define CFR1_STP2 0x20 /* Stop timer */
@@ -196,8 +215,8 @@
#define CFR1_GM1 0x04 /* Gate mode for pin 1 */
#define CFR1_STP1 0x02 /* Stop timer */
#define CFR1_RST1 0x01 /* Reset timer */
- u8 res0[3];
- u8 cfr2; /* Timer3/4 Configuration */
+ u8 res0[3];
+ u8 cfr2; /* Timer3/4 Configuration */
#define CFR2_PCAS 0x80 /* Pair Cascade mode */
#define CFR2_SCAS 0x40 /* Super Cascade mode */
#define CFR2_STP4 0x20 /* Stop timer */
@@ -206,8 +225,8 @@
#define CFR2_GM3 0x04 /* Gate mode for pin 3 */
#define CFR2_STP3 0x02 /* Stop timer */
#define CFR2_RST3 0x01 /* Reset timer */
- u8 res1[10];
- u16 mdr1; /* Timer1 Mode Register */
+ u8 res1[10];
+ u16 mdr1; /* Timer1 Mode Register */
#define MDR_SPS 0xff00 /* Secondary Prescaler value */
#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */
#define MDR_OM 0x0020 /* Output mode */
@@ -215,40 +234,40 @@
#define MDR_FRR 0x0008 /* Free run/restart */
#define MDR_ICLK 0x0006 /* Input clock source for the timer */
#define MDR_GE 0x0001 /* Gate enable */
- u16 mdr2; /* Timer2 Mode Register */
+ u16 mdr2; /* Timer2 Mode Register */
u16 rfr1; /* Timer1 Reference Register */
- u16 rfr2; /* Timer2 Reference Register */
- u16 cpr1; /* Timer1 Capture Register */
- u16 cpr2; /* Timer2 Capture Register */
- u16 cnr1; /* Timer1 Counter Register */
- u16 cnr2; /* Timer2 Counter Register */
- u16 mdr3; /* Timer3 Mode Register */
- u16 mdr4; /* Timer4 Mode Register */
- u16 rfr3; /* Timer3 Reference Register */
- u16 rfr4; /* Timer4 Reference Register */
- u16 cpr3; /* Timer3 Capture Register */
- u16 cpr4; /* Timer4 Capture Register */
- u16 cnr3; /* Timer3 Counter Register */
- u16 cnr4; /* Timer4 Counter Register */
- u16 evr1; /* Timer1 Event Register */
- u16 evr2; /* Timer2 Event Register */
- u16 evr3; /* Timer3 Event Register */
- u16 evr4; /* Timer4 Event Register */
+ u16 rfr2; /* Timer2 Reference Register */
+ u16 cpr1; /* Timer1 Capture Register */
+ u16 cpr2; /* Timer2 Capture Register */
+ u16 cnr1; /* Timer1 Counter Register */
+ u16 cnr2; /* Timer2 Counter Register */
+ u16 mdr3; /* Timer3 Mode Register */
+ u16 mdr4; /* Timer4 Mode Register */
+ u16 rfr3; /* Timer3 Reference Register */
+ u16 rfr4; /* Timer4 Reference Register */
+ u16 cpr3; /* Timer3 Capture Register */
+ u16 cpr4; /* Timer4 Capture Register */
+ u16 cnr3; /* Timer3 Counter Register */
+ u16 cnr4; /* Timer4 Counter Register */
+ u16 evr1; /* Timer1 Event Register */
+ u16 evr2; /* Timer2 Event Register */
+ u16 evr3; /* Timer3 Event Register */
+ u16 evr4; /* Timer4 Event Register */
#define GTEVR_REF 0x0002 /* Output reference event */
#define GTEVR_CAP 0x0001 /* Counter Capture event */
#define GTEVR_RES ~(EVR_CAP|EVR_REF)
- u16 psr1; /* Timer1 Prescaler Register */
- u16 psr2; /* Timer2 Prescaler Register */
- u16 psr3; /* Timer3 Prescaler Register */
- u16 psr4; /* Timer4 Prescaler Register */
- u8 res[0xC0];
-} gtm8349_t;
+ u16 psr1; /* Timer1 Prescaler Register */
+ u16 psr2; /* Timer2 Prescaler Register */
+ u16 psr3; /* Timer3 Prescaler Register */
+ u16 psr4; /* Timer4 Prescaler Register */
+ u8 res[0xC0];
+} gtm8349_t;
/*
* Integrated Programmable Interrupt Controller
*/
typedef struct ipic8349 {
- u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */
+ u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */
#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */
#define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */
#define SICFR_MPSA 0x00200000 /* Mixed interrupts Priority Scheme for group A */
@@ -256,11 +275,11 @@
#define SICFR_IPSA 0x00010000 /* Internal interrupts Priority Scheme for group A */
#define SICFR_HPIT 0x00000300 /* HPI priority position IPIC output interrupt Type */
#define SICFR_RES ~(SICFR_HPI|SICFR_MPSB|SICFR_MPSA|SICFR_IPSD|SICFR_IPSA|SICFR_HPIT)
- u32 sivcr; /* System Global Interrupt Vector Register (SIVCR) */
+ u32 sivcr; /* System Global Interrupt Vector Register (SIVCR) */
#define SICVR_IVECX 0xfc000000 /* Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation) */
#define SICVR_IVEC 0x0000007f /* Interrupt vector */
#define SICVR_RES ~(SICVR_IVECX|SICVR_IVEC)
- u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */
+ u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */
#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */
#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */
#define SIIH_TSEC1ER 0x20000000 /* TSEC1 Eror interrupt */
@@ -275,11 +294,12 @@
#define SIIH_I2C1 0x00000004 /* I2C1 interrupt */
#define SIIH_I2C2 0x00000002 /* I2C1 interrupt */
#define SIIH_SPI 0x00000001 /* SPI interrupt */
-#define SIIH_RES ~(SIIH_TSEC1TX|SIIH_TSEC1RX|SIIH_TSEC1ER|SIIH_TSEC2TX \
- |SIIH_TSEC2RX|SIIH_TSEC2ER|SIIH_USB2DR|SIIH_USB2MPH \
- |SIIH_UART1 |SIIH_UART2 |SIIH_SEC |SIIH_I2C1 \
- |SIIH_I2C2 |SIIH_SPI)
- u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */
+#define SIIH_RES ~(SIIH_TSEC1TX | SIIH_TSEC1RX | SIIH_TSEC1ER \
+ | SIIH_TSEC2TX | SIIH_TSEC2RX | SIIH_TSEC2ER \
+ | SIIH_USB2DR | SIIH_USB2MPH | SIIH_UART1 \
+ | SIIH_UART2 | SIIH_SEC | SIIH_I2C1 \
+ | SIIH_I2C2 | SIIH_SPI)
+ u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */
#define SIIL_RTCS 0x80000000 /* RTC SECOND interrupt */
#define SIIL_PIT 0x40000000 /* PIT interrupt */
#define SIIL_PCI1 0x20000000 /* PCI1 interrupt */
@@ -302,20 +322,21 @@
#define SIIL_GTM1 0x00000020 /* GTM1 interrupt */
#define SIIL_GTM5 0x00000010 /* GTM5 interrupt */
#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */
-#define SIIL_RES ~(SIIL_RTCS |SIIL_PIT |SIIL_PCI1 |SIIL_PCI2 |SIIL_RTCA \
- |SIIL_MU |SIIL_SBA |SIIL_DMA |SIIL_GTM4 |SIIL_GTM8 \
- |SIIL_GPIO1|SIIL_GPIO2|SIIL_DDR |SIIL_LBC |SIIL_GTM2 \
- |SIIL_GTM6 |SIIL_PMC |SIIL_GTM3 |SIIL_GTM7 |SIIL_GTM1 \
- |SIIL_GTM5 |SIIL_DPTC )
- u32 siprr_a; /* System Internal Interrupt Group A Priority Register (PRR) */
- u8 res0[8];
- u32 siprr_d; /* System Internal Interrupt Group D Priority Register (PRR) */
- u32 simsr_h; /* System Internal Interrupt Mask Register - High (SIIH) */
- u32 simsr_l; /* System Internal Interrupt Mask Register - Low (SIIL) */
- u8 res1[4];
- u32 sepnr; /* System External Interrupt Pending Register (SEI) */
- u32 smprr_a; /* System Mixed Interrupt Group A Priority Register (PRR) */
- u32 smprr_b; /* System Mixed Interrupt Group B Priority Register (PRR) */
+#define SIIL_RES ~(SIIL_RTCS | SIIL_PIT | SIIL_PCI1 | SIIL_PCI2 \
+ | SIIL_RTCA | SIIL_MU | SIIL_SBA | SIIL_DMA \
+ | SIIL_GTM4 | SIIL_GTM8 | SIIL_GPIO1 | SIIL_GPIO2 \
+ | SIIL_DDR | SIIL_LBC | SIIL_GTM2 | SIIL_GTM6 \
+ | SIIL_PMC |SIIL_GTM3 | SIIL_GTM7 | SIIL_GTM1 \
+ | SIIL_GTM5 |SIIL_DPTC )
+ u32 siprr_a; /* System Internal Interrupt Group A Priority Register (PRR) */
+ u8 res0[8];
+ u32 siprr_d; /* System Internal Interrupt Group D Priority Register (PRR) */
+ u32 simsr_h; /* System Internal Interrupt Mask Register - High (SIIH) */
+ u32 simsr_l; /* System Internal Interrupt Mask Register - Low (SIIL) */
+ u8 res1[4];
+ u32 sepnr; /* System External Interrupt Pending Register (SEI) */
+ u32 smprr_a; /* System Mixed Interrupt Group A Priority Register (PRR) */
+ u32 smprr_b; /* System Mixed Interrupt Group B Priority Register (PRR) */
#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */
#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */
#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */
@@ -325,7 +346,7 @@
#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */
#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */
#define PRR_RES ~(PRR_0|PRR_1|PRR_2|PRR_3|PRR_4|PRR_5|PRR_6|PRR_7)
- u32 semsr; /* System External Interrupt Mask Register (SEI) */
+ u32 semsr; /* System External Interrupt Mask Register (SEI) */
#define SEI_IRQ0 0x80000000 /* IRQ0 external interrupt */
#define SEI_IRQ1 0x40000000 /* IRQ1 external interrupt */
#define SEI_IRQ2 0x20000000 /* IRQ2 external interrupt */
@@ -335,9 +356,10 @@
#define SEI_IRQ6 0x02000000 /* IRQ6 external interrupt */
#define SEI_IRQ7 0x01000000 /* IRQ7 external interrupt */
#define SEI_SIRQ0 0x00008000 /* SIRQ0 external interrupt */
-#define SEI_RES ~( SEI_IRQ0 |SEI_IRQ1 |SEI_IRQ2 |SEI_IRQ3 |SEI_IRQ4 \
- |SEI_IRQ5 |SEI_IRQ6 |SEI_IRQ7 |SEI_SIRQ0)
- u32 secnr; /* System External Interrupt Control Register (SECNR) */
+#define SEI_RES ~( SEI_IRQ0 | SEI_IRQ1 | SEI_IRQ2 | SEI_IRQ3 \
+ | SEI_IRQ4 | SEI_IRQ5 | SEI_IRQ6 | SEI_IRQ7 \
+ | SEI_SIRQ0)
+ u32 secnr; /* System External Interrupt Control Register (SECNR) */
#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */
#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */
#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */
@@ -350,11 +372,12 @@
#define SECNR_EDI5 0x00000400 /* IRQ5 external interrupt edge/level detect */
#define SECNR_EDI6 0x00000200 /* IRQ6 external interrupt edge/level detect */
#define SECNR_EDI7 0x00000100 /* IRQ7 external interrupt edge/level detect */
-#define SECNR_RES ~( SECNR_MIXB0T|SECNR_MIXB1T|SECNR_MIXA0T|SECNR_SYSA1T \
- |SECNR_EDI0 |SECNR_EDI1 |SECNR_EDI2 |SECNR_EDI3 \
- |SECNR_EDI4 |SECNR_EDI5 |SECNR_EDI6 |SECNR_EDI7)
- u32 sersr; /* System Error Status Register (SERR) */
- u32 sermr; /* System Error Mask Register (SERR) */
+#define SECNR_RES ~( SECNR_MIXB0T | SECNR_MIXB1T | SECNR_MIXA0T \
+ | SECNR_SYSA1T | SECNR_EDI0 | SECNR_EDI1 \
+ | SECNR_EDI2 | SECNR_EDI3 | SECNR_EDI4 \
+ | SECNR_EDI5 | SECNR_EDI6 | SECNR_EDI7)
+ u32 sersr; /* System Error Status Register (SERR) */
+ u32 sermr; /* System Error Mask Register (SERR) */
#define SERR_IRQ0 0x80000000 /* IRQ0 MCP request */
#define SERR_WDT 0x40000000 /* WDT MCP request */
#define SERR_SBA 0x20000000 /* SBA MCP request */
@@ -364,17 +387,18 @@
#define SERR_PCI2 0x02000000 /* PCI2 MCP request */
#define SERR_MU 0x01000000 /* MU MCP request */
#define SERR_RNC 0x00010000 /* MU MCP request (!!! Non-visible for users !!!) */
-#define SERR_RES ~( SERR_IRQ0|SERR_WDT |SERR_SBA |SERR_DDR |SERR_LBC \
- |SERR_PCI1|SERR_PCI2|SERR_MU |SERR_RNC )
- u32 sercr; /* System Error Control Register (SERCR) */
+#define SERR_RES ~( SERR_IRQ0 | SERR_WDT | SERR_SBA | SERR_DDR \
+ |SERR_LBC | SERR_PCI1 | SERR_PCI2 | SERR_MU \
+ |SERR_RNC )
+ u32 sercr; /* System Error Control Register (SERCR) */
#define SERCR_MCPR 0x00000001 /* MCP Route */
#define SERCR_RES ~(SERCR_MCPR)
- u8 res2[4];
- u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */
- u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */
- u32 sefcr; /* System External Interrupt Force Register (SEI) */
- u32 serfr; /* System Error Force Register (SERR) */
- u8 res3[0xA0];
+ u8 res2[4];
+ u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */
+ u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */
+ u32 sefcr; /* System External Interrupt Force Register (SEI) */
+ u32 serfr; /* System Error Force Register (SERR) */
+ u8 res3[0xA0];
} ipic8349_t;
/*
@@ -382,10 +406,10 @@
*/
typedef struct arbiter8349 {
u32 acr; /* Arbiter Configuration Register */
-#define ACR_COREDIS 0x10000000 /* Core disable. */
+#define ACR_COREDIS 0x10000000 /* Core disable. */
#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */
#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */
-#define ACR_RPTCNT 0x00000700 /* Repeat count. */
+#define ACR_RPTCNT 0x00000700 /* Repeat count. */
#define ACR_APARK 0x00000030 /* Address parking. */
#define ACR_PARKM 0x0000000F /* Parking master. */
#define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM)
@@ -420,7 +444,7 @@
* Reset Module
*/
typedef struct reset8349 {
- u32 rcwl; /* RCWL Register */
+ u32 rcwl; /* RCWL Register */
#define RCWL_LBIUCM 0x80000000 /* LBIUCM */
#define RCWL_LBIUCM_SHIFT 31
#define RCWL_DDRCM 0x40000000 /* DDRCM */
@@ -433,8 +457,8 @@
#define RCWL_CEVCOD 0x000000C0 /* CEVCOD */
#define RCWL_CEPDF 0x00000020 /* CEPDF */
#define RCWL_CEPMF 0x0000001F /* CEPMF */
-#define RCWL_RES ~(RCWL_BIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF)
- u32 rcwh; /* RCHL Register */
+#define RCWL_RES ~(RCWL_BIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF)
+ u32 rcwh; /* RCHL Register */
#define RCWH_PCIHOST 0x80000000 /* PCIHOST */
#define RCWH_PCIHOST_SHIFT 31
#define RCWH_PCI64 0x40000000 /* PCI64 */
@@ -450,11 +474,13 @@
#define RCWH_TPR 0x00000100 /* TPR */
#define RCWH_TLE 0x00000008 /* TLE */
#define RCWH_LALE 0x00000004 /* LALE */
-#define RCWH_RES ~(RCWH_PCIHOST|RCWH_PCI64|RCWH_PCI1ARB|RCWH_PCI2ARB \
- |RCWH_COREDIS|RCWH_BMS|RCWH_BOOTSEQ|RCWH_SWEN|RCWH_ROMLOC \
- |RCWH_TSEC1M|RCWH_TSEC2M|RCWH_TPR|RCWH_TLE|RCWH_LALE)
- u8 res0[8];
- u32 rsr; /* Reset status Register */
+#define RCWH_RES ~(RCWH_PCIHOST | RCWH_PCI64 | RCWH_PCI1ARB \
+ | RCWH_PCI2ARB | RCWH_COREDIS | RCWH_BMS \
+ | RCWH_BOOTSEQ | RCWH_SWEN | RCWH_ROMLOC \
+ | RCWH_TSEC1M | RCWH_TSEC2M | RCWH_TPR \
+ | RCWH_TLE | RCWH_LALE)
+ u8 res0[8];
+ u32 rsr; /* Reset status Register */
#define RSR_RSTSRC 0xE0000000 /* Reset source */
#define RSR_RSTSRC_SHIFT 29
#define RSR_BSF 0x00010000 /* Boot seq. fail */
@@ -477,37 +503,38 @@
#define RSR_SRS_SHIFT 1
#define RSR_HRS 0x00000001 /* hard reset status */
#define RSR_HRS_SHIFT 0
-#define RSR_RES ~(RSR_RSTSRC|RSR_BSF|RSR_SWSR|RSR_SWHR|RSR_JHRS|RSR_JSRS|RSR_CSHR|RSR_SWRS|RSR_BMRS|RSR_SRS|RSR_HRS)
- u32 rmr; /* Reset mode Register */
+#define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR | RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS | RSR_BMRS | RSR_SRS | RSR_HRS)
+ u32 rmr; /* Reset mode Register */
#define RMR_CSRE 0x00000001 /* checkstop reset enable */
#define RMR_CSRE_SHIFT 0
#define RMR_RES ~(RMR_CSRE)
- u32 rpr; /* Reset protection Register */
- u32 rcr; /* Reset Control Register */
+ u32 rpr; /* Reset protection Register */
+ u32 rcr; /* Reset Control Register */
#define RCR_SWHR 0x00000002 /* software hard reset */
#define RCR_SWSR 0x00000001 /* software soft reset */
-#define RCR_RES ~(RCR_SWHR|RCR_SWSR)
- u32 rcer; /* Reset Control Enable Register */
+#define RCR_RES ~(RCR_SWHR | RCR_SWSR)
+ u32 rcer; /* Reset Control Enable Register */
#define RCER_CRE 0x00000001 /* software hard reset */
#define RCER_RES ~(RCER_CRE)
u8 res1[0xDC];
} reset8349_t;
-
+
typedef struct clk8349 {
- u32 spmr; /* system PLL mode Register */
+ u32 spmr; /* system PLL mode Register */
#define SPMR_LBIUCM 0x80000000 /* LBIUCM */
#define SPMR_DDRCM 0x40000000 /* DDRCM */
#define SPMR_SVCOD 0x30000000 /* SVCOD */
#define SPMR_SPMF 0x0F000000 /* SPMF */
#define SPMR_CKID 0x00800000 /* CKID */
-#define SPMR_CKID_SHIFT 23
+#define SPMR_CKID_SHIFT 23
#define SPMR_COREPLL 0x007F0000 /* COREPLL */
#define SPMR_CEVCOD 0x000000C0 /* CEVCOD */
#define SPMR_CEPDF 0x00000020 /* CEPDF */
#define SPMR_CEPMF 0x0000001F /* CEPMF */
-#define SPMR_RES ~(SPMR_LBIUCM|SPMR_DDRCM|SPMR_SVCOD|SPMR_SPMF|SPMR_CKID \
- |SPMR_COREPLL|SPMR_CEVCOD|SPMR_CEPDF|SPMR_CEPMF)
- u32 occr; /* output clock control Register */
+#define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SVCOD \
+ | SPMR_SPMF | SPMR_CKID | SPMR_COREPLL \
+ | SPMR_CEVCOD | SPMR_CEPDF | SPMR_CEPMF)
+ u32 occr; /* output clock control Register */
#define OCCR_PCICOE0 0x80000000 /* PCICOE0 */
#define OCCR_PCICOE1 0x40000000 /* PCICOE1 */
#define OCCR_PCICOE2 0x20000000 /* PCICOE2 */
@@ -526,11 +553,13 @@
#define OCCR_PCICD7 0x00010000 /* PCICD7 */
#define OCCR_PCI1CR 0x00000002 /* PCI1CR */
#define OCCR_PCI2CR 0x00000001 /* PCI2CR */
-#define OCCR_RES ~(OCCR_PCICOE0|OCCR_PCICOE1|OCCR_PCICOE2|OCCR_PCICOE3|OCCR_PCICOE4 \
- |OCCR_PCICOE5|OCCR_PCICOE6|OCCR_PCICOE7|OCCR_PCICD0|OCCR_PCICD1 \
- |OCCR_PCICD2 |OCCR_PCICD3 |OCCR_PCICD4 |OCCR_PCICD5|OCCR_PCICD6 \
- |OCCR_PCICD7 |OCCR_PCI1CR |OCCR_PCI2CR )
- u32 sccr; /* system clock control Register */
+#define OCCR_RES ~(OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 \
+ | OCCR_PCICOE3 | OCCR_PCICOE4 | OCCR_PCICOE5 \
+ | OCCR_PCICOE6 | OCCR_PCICOE7 | OCCR_PCICD0 \
+ | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICD3 \
+ | OCCR_PCICD4 | OCCR_PCICD5 | OCCR_PCICD6 \
+ | OCCR_PCICD7 | OCCR_PCI1CR | OCCR_PCI2CR )
+ u32 sccr; /* system clock control Register */
#define SCCR_TSEC1CM 0xc0000000 /* TSEC1CM */
#define SCCR_TSEC1CM_SHIFT 30
#define SCCR_TSEC2CM 0x30000000 /* TSEC2CM */
@@ -542,23 +571,23 @@
#define SCCR_USBDRCM 0x00300000 /* USBDRCM */
#define SCCR_USBDRCM_SHIFT 20
#define SCCR_PCICM 0x00010000 /* PCICM */
-#define SCCR_RES ~( SCCR_TSEC1CM|SCCR_TSEC2CM|SCCR_ENCCM|SCCR_USBMPHCM \
- |SCCR_USBDRCM|SCCR_PCICM)
+#define SCCR_RES ~( SCCR_TSEC1CM | SCCR_TSEC2CM | SCCR_ENCCM \
+ | SCCR_USBMPHCM | SCCR_USBDRCM | SCCR_PCICM)
u8 res0[0xF4];
-} clk8349_t;
+} clk8349_t;
/*
* Power Management Control Module
*/
typedef struct pmc8349 {
- u32 pmccr; /* PMC Configuration Register */
+ u32 pmccr; /* PMC Configuration Register */
#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */
#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */
-#define PMCCR_RES ~(PMCCR_SLPEN|PMCCR_DLPEN)
- u32 pmcer; /* PMC Event Register */
+#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN)
+ u32 pmcer; /* PMC Event Register */
#define PMCER_PMCI 0x00000001 /* PMC Interrupt */
#define PMCER_RES ~(PMCER_PMCI)
- u32 pmcmr; /* PMC Mask Register */
+ u32 pmcmr; /* PMC Mask Register */
#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */
#define PMCMR_RES ~(PMCMR_PMCIE)
u8 res0[0xF4];
@@ -570,7 +599,7 @@
*/
typedef struct gpio8349 {
u32 dir; /* direction register */
- u32 odr; /* open drain register */
+ u32 odr; /* open drain register */
u32 dat; /* data register */
u32 ier; /* interrupt event register */
u32 imr; /* interrupt mask register */
@@ -578,22 +607,22 @@
u8 res0[0xE8];
} gpio8349_t;
-/*
+/*
* DDR Memory Controller Memory Map
*/
typedef struct ddr_cs_bnds{
- u32 csbnds;
+ u32 csbnds;
#define CSBNDS_SA 0x00FF0000
#define CSBNDS_SA_SHIFT 16
#define CSBNDS_EA 0x000000FF
#define CSBNDS_EA_SHIFT 0
- u8 res0[4];
+ u8 res0[4];
} ddr_cs_bnds_t;
typedef struct ddr8349{
- ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */
- u8 res0[0x60];
- u32 cs_config[4]; /**< Chip Select x Configuration */
+ ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */
+ u8 res0[0x60];
+ u32 cs_config[4]; /**< Chip Select x Configuration */
#define CSCONFIG_EN 0x80000000
#define CSCONFIG_AP 0x00800000
#define CSCONFIG_ROW_BIT 0x00000700
@@ -605,8 +634,8 @@
#define CSCONFIG_COL_BIT_9 0x00000001
#define CSCONFIG_COL_BIT_10 0x00000002
#define CSCONFIG_COL_BIT_11 0x00000003
- u8 res1[0x78];
- u32 timing_cfg_1; /**< SDRAM Timing Configuration 1 */
+ u8 res1[0x78];
+ u32 timing_cfg_1; /**< SDRAM Timing Configuration 1 */
#define TIMING_CFG1_PRETOACT 0x70000000
#define TIMING_CFG1_PRETOACT_SHIFT 28
#define TIMING_CFG1_ACTTOPRE 0x0F000000
@@ -620,18 +649,18 @@
#define TIMING_CFG1_WRREC 0x00000700
#define TIMING_CFG1_WRREC_SHIFT 8
#define TIMING_CFG1_ACTTOACT 0x00000070
-#define TIMING_CFG1_ACTTOACT_SHIFT 4
+#define TIMING_CFG1_ACTTOACT_SHIFT 4
#define TIMING_CFG1_WRTORD 0x00000007
#define TIMING_CFG1_WRTORD_SHIFT 0
- u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */
+ u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */
#define TIMING_CFG2_CPO 0x0F000000
#define TIMING_CFG2_CPO_SHIFT 24
#define TIMING_CFG2_ACSM 0x00080000
-#define TIMING_CFG2_WR_DATA_DELAY 0x00001C00
+#define TIMING_CFG2_WR_DATA_DELAY 0x00001C00
#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10
- u32 sdram_cfg; /**< SDRAM Control Configuration */
+ u32 sdram_cfg; /**< SDRAM Control Configuration */
#define SDRAM_CFG_MEM_EN 0x80000000
#define SDRAM_CFG_SREN 0x40000000
#define SDRAM_CFG_ECC_EN 0x20000000
@@ -644,109 +673,108 @@
#define SDRAM_CFG_NCAP 0x00020000
#define SDRAM_CFG_2T_EN 0x00008000
- u8 res2[4];
- u32 sdram_mode; /**< SDRAM Mode Configuration */
-#define SDRAM_MODE_ESD 0xFFFF0000
-#define SDRAM_MODE_ESD_SHIFT 16
+ u8 res2[4];
+ u32 sdram_mode; /**< SDRAM Mode Configuration */
+#define SDRAM_MODE_ESD 0xFFFF0000
+#define SDRAM_MODE_ESD_SHIFT 16
#define SDRAM_MODE_SD 0x0000FFFF
#define SDRAM_MODE_SD_SHIFT 0
- u8 res3[8];
- u32 sdram_interval; /**< SDRAM Interval Configuration */
+ u8 res3[8];
+ u32 sdram_interval; /**< SDRAM Interval Configuration */
#define SDRAM_INTERVAL_REFINT 0x3FFF0000
#define SDRAM_INTERVAL_REFINT_SHIFT 16
#define SDRAM_INTERVAL_BSTOPRE 0x00003FFF
#define SDRAM_INTERVAL_BSTOPRE_SHIFT 0
- u8 res9[8];
- u32 sdram_clk_cntl;
- u8 res4[0xCCC];
- u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */
- u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */
- u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */
- u8 res5[0x14];
- u32 capture_data_hi; /**< Memory Data Path Read Capture High */
- u32 capture_data_lo; /**< Memory Data Path Read Capture Low */
- u32 capture_ecc; /**< Memory Data Path Read Capture ECC */
- u8 res6[0x14];
- u32 err_detect; /**< Memory Error Detect */
- u32 err_disable; /**< Memory Error Disable */
- u32 err_int_en; /**< Memory Error Interrupt Enable */
- u32 capture_attributes; /**< Memory Error Attributes Capture */
- u32 capture_address; /**< Memory Error Address Capture */
- u32 capture_ext_address;/**< Memory Error Extended Address Capture */
- u32 err_sbe; /**< Memory Single-Bit ECC Error Management */
- u8 res7[0xA4];
+ u8 res9[8];
+ u32 sdram_clk_cntl;
+ u8 res4[0xCCC];
+ u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */
+ u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */
+ u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */
+ u8 res5[0x14];
+ u32 capture_data_hi; /**< Memory Data Path Read Capture High */
+ u32 capture_data_lo; /**< Memory Data Path Read Capture Low */
+ u32 capture_ecc; /**< Memory Data Path Read Capture ECC */
+ u8 res6[0x14];
+ u32 err_detect; /**< Memory Error Detect */
+ u32 err_disable; /**< Memory Error Disable */
+ u32 err_int_en; /**< Memory Error Interrupt Enable */
+ u32 capture_attributes; /**< Memory Error Attributes Capture */
+ u32 capture_address; /**< Memory Error Address Capture */
+ u32 capture_ext_address;/**< Memory Error Extended Address Capture */
+ u32 err_sbe; /**< Memory Single-Bit ECC Error Management */
+ u8 res7[0xA4];
u32 debug_reg;
- u8 res8[0xFC];
+ u8 res8[0xFC];
} ddr8349_t;
/*
* I2C1 Controller
- */
+ */
/*
* DUART
*/
typedef struct duart8349{
- u8 urbr_ulcr_udlb; /**< combined register for URBR, UTHR and UDLB */
- u8 uier_udmb; /**< combined register for UIER and UDMB */
- u8 uiir_ufcr_uafr; /**< combined register for UIIR, UFCR and UAFR */
- u8 ulcr; /**< line control register */
- u8 umcr; /**< MODEM control register */
- u8 ulsr; /**< line status register */
- u8 umsr; /**< MODEM status register */
- u8 uscr; /**< scratch register */
- u8 res0[8];
- u8 udsr; /**< DMA status register */
- u8 res1[3];
- u8 res2[0xEC];
-
+ u8 urbr_ulcr_udlb; /**< combined register for URBR, UTHR and UDLB */
+ u8 uier_udmb; /**< combined register for UIER and UDMB */
+ u8 uiir_ufcr_uafr; /**< combined register for UIIR, UFCR and UAFR */
+ u8 ulcr; /**< line control register */
+ u8 umcr; /**< MODEM control register */
+ u8 ulsr; /**< line status register */
+ u8 umsr; /**< MODEM status register */
+ u8 uscr; /**< scratch register */
+ u8 res0[8];
+ u8 udsr; /**< DMA status register */
+ u8 res1[3];
+ u8 res2[0xEC];
} duart8349_t;
/*
* Local Bus Controller Registers
*/
typedef struct lbus_bank{
- u32 br; /**< Base Register */
- u32 or; /**< Base Register */
+ u32 br; /**< Base Register */
+ u32 or; /**< Base Register */
} lbus_bank_t;
typedef struct lbus8349 {
- lbus_bank_t bank[8];
- u8 res0[0x28];
- u32 mar; /**< UPM Address Register */
- u8 res1[0x4];
- u32 mamr; /**< UPMA Mode Register */
- u32 mbmr; /**< UPMB Mode Register */
- u32 mcmr; /**< UPMC Mode Register */
- u8 res2[0x8];
- u32 mrtpr; /**< Memory Refresh Timer Prescaler Register */
- u32 mdr; /**< UPM Data Register */
- u8 res3[0x8];
- u32 lsdmr; /**< SDRAM Mode Register */
- u8 res4[0x8];
- u32 lurt; /**< UPM Refresh Timer */
- u32 lsrt; /**< SDRAM Refresh Timer */
- u8 res5[0x8];
- u32 ltesr; /**< Transfer Error Status Register */
- u32 ltedr; /**< Transfer Error Disable Register */
- u32 lteir; /**< Transfer Error Interrupt Register */
- u32 lteatr; /**< Transfer Error Attributes Register */
- u32 ltear; /**< Transfer Error Address Register */
- u8 res6[0xC];
- u32 lbcr; /**< Configuration Register */
+ lbus_bank_t bank[8];
+ u8 res0[0x28];
+ u32 mar; /**< UPM Address Register */
+ u8 res1[0x4];
+ u32 mamr; /**< UPMA Mode Register */
+ u32 mbmr; /**< UPMB Mode Register */
+ u32 mcmr; /**< UPMC Mode Register */
+ u8 res2[0x8];
+ u32 mrtpr; /**< Memory Refresh Timer Prescaler Register */
+ u32 mdr; /**< UPM Data Register */
+ u8 res3[0x8];
+ u32 lsdmr; /**< SDRAM Mode Register */
+ u8 res4[0x8];
+ u32 lurt; /**< UPM Refresh Timer */
+ u32 lsrt; /**< SDRAM Refresh Timer */
+ u8 res5[0x8];
+ u32 ltesr; /**< Transfer Error Status Register */
+ u32 ltedr; /**< Transfer Error Disable Register */
+ u32 lteir; /**< Transfer Error Interrupt Register */
+ u32 lteatr; /**< Transfer Error Attributes Register */
+ u32 ltear; /**< Transfer Error Address Register */
+ u8 res6[0xC];
+ u32 lbcr; /**< Configuration Register */
#define LBCR_LDIS 0x80000000
#define LBCR_LDIS_SHIFT 31
#define LBCR_BCTLC 0x00C00000
#define LBCR_BCTLC_SHIFT 22
#define LBCR_LPBSE 0x00020000
-#define LBCR_LPBSE_SHIFT 17
+#define LBCR_LPBSE_SHIFT 17
#define LBCR_EPAR 0x00010000
#define LBCR_EPAR_SHIFT 16
#define LBCR_BMT 0x0000FF00
#define LBCR_BMT_SHIFT 8
- u32 lcrr; /**< Clock Ratio Register */
+ u32 lcrr; /**< Clock Ratio Register */
#define LCRR_DBYP 0x80000000
#define LCRR_DBYP_SHIFT 31
#define LCRR_BUFCMDC 0x30000000
@@ -759,8 +787,8 @@
#define LCRR_CLKDIV_SHIFT 0
- u8 res7[0x28];
- u8 res8[0xF00];
+ u8 res7[0x28];
+ u8 res8[0xF00];
} lbus8349_t;
/*
@@ -768,16 +796,16 @@
*/
typedef struct spi8349
{
- u32 mode; /**< mode register */
- u32 event; /**< event register */
- u32 mask; /**< mask register */
- u32 com; /**< command register */
- u8 res0[0x10];
- u32 tx; /**< transmit register */
- u32 rx; /**< receive register */
- u8 res1[0xD8];
+ u32 mode; /**< mode register */
+ u32 event; /**< event register */
+ u32 mask; /**< mask register */
+ u32 com; /**< command register */
+ u8 res0[0x10];
+ u32 tx; /**< transmit register */
+ u32 rx; /**< receive register */
+ u8 res1[0xD8];
} spi8349_t;
-
+
typedef struct dma8349 {
u8 fixme[0x300];
} dma8349_t;
@@ -814,7 +842,7 @@
} pot8349_t;
/*
* Sequencer
- */
+ */
typedef struct ios8349 {
pot8349_t pot[6];
#define POTAR_TA_MASK 0x000fffff
@@ -905,7 +933,7 @@
#define EATCR_TS_3 0x00300000
#define EATCR_ES_MASK 0x000f0000 /* error source */
#define EATCR_ES_EM 0x00000000 /* external master */
-#define EATCR_ES_DMA 0x00050000
+#define EATCR_ES_DMA 0x00050000
#define EATCR_CMD_MASK 0x0000f000
#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable*/
#define EATCR_BE_MASK 0x000000f0 /* PCI byte enable */
@@ -948,7 +976,7 @@
#define PIWAR_RTT_SNOOP 0x00050000
#define PIWAR_WTT_MASK 0x0000f000
#define PIWAR_WTT_NO_SNOOP 0x00004000
-#define PIWAR_WTT_SNOOP 0x00005000
+#define PIWAR_WTT_SNOOP 0x00005000
#define PIWAR_IWS_MASK 0x0000003F
#define PIWAR_IWS_4K 0x0000000B
#define PIWAR_IWS_8K 0x0000000C
@@ -973,7 +1001,7 @@
} pcictrl8349_t;
/*
- * USB
+ * USB
*/
typedef struct usb8349 {
u8 fixme[0x2000];
@@ -1000,9 +1028,9 @@
rtclk8349_t pit; /* Periodic Interval Timer */
gtm8349_t gtm[2]; /* Global Timers Module */
ipic8349_t ipic; /* Integrated Programmable Interrupt Controller */
- arbiter8349_t arbiter; /* System Arbiter Registers */
+ arbiter8349_t arbiter; /* System Arbiter Registers */
reset8349_t reset; /* Reset Module */
- clk8349_t clk; /* System Clock Module */
+ clk8349_t clk; /* System Clock Module */
pmc8349_t pmc; /* Power Management Control Module */
gpio8349_t pgio[2]; /* general purpose I/O module */
u8 res0[0x200];
@@ -1026,7 +1054,7 @@
usb8349_t usb;
tsec8349_t tsec[2];
u8 res7[0xA000];
- security8349_t security;
+ security8349_t security;
} immap_t;
#endif /* __IMMAP_8349__ */
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 22f19f0..2f10e95 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -9,9 +9,9 @@
#ifndef __IMMAP_85xx__
#define __IMMAP_85xx__
-
-/* Local-Access Registers and ECM Registers(0x0000-0x2000) */
-
+/*
+ * Local-Access Registers and ECM Registers(0x0000-0x2000)
+ */
typedef struct ccsr_local_ecm {
uint ccsrbar; /* 0x0 - Control Configuration Status Registers Base Address Register */
char res1[4];
@@ -65,9 +65,9 @@
char res24[492];
} ccsr_local_ecm_t;
-
-/* DDR memory controller registers(0x2000-0x3000) */
-
+/*
+ * DDR memory controller registers(0x2000-0x3000)
+ */
typedef struct ccsr_ddr {
uint cs0_bnds; /* 0x2000 - DDR Chip Select 0 Memory Bounds */
char res1[4];
@@ -125,11 +125,9 @@
char res12[240];
} ccsr_ddr_t;
-
-
-
-/* I2C Registers(0x3000-0x4000) */
-
+/*
+ * I2C Registers(0x3000-0x4000)
+ */
typedef struct ccsr_i2c {
u_char i2cadr; /* 0x3000 - I2C Address Register */
#define MPC85xx_I2CADR_MASK 0xFE
@@ -246,10 +244,10 @@
char res8[12072];
} ccsr_lbc_t;
-
-/* PCI Registers(0x8000-0x9000) */
-/* Omitting Reserved(0x9000-0x2_0000) */
-
+/*
+ * PCI Registers(0x8000-0x9000)
+ * Omitting Reserved(0x9000-0x2_0000)
+ */
typedef struct ccsr_pcix {
uint cfg_addr; /* 0x8000 - PCIX Configuration Address Register */
uint cfg_data; /* 0x8004 - PCIX Configuration Data Register */
@@ -314,9 +312,9 @@
char res11[94688];
} ccsr_pcix_t;
-
-/* L2 Cache Registers(0x2_0000-0x2_1000) */
-
+/*
+ * L2 Cache Registers(0x2_0000-0x2_1000)
+ */
typedef struct ccsr_l2cache {
uint l2ctl; /* 0x20000 - L2 configuration register 0 */
char res1[12];
@@ -358,9 +356,9 @@
char res15[420];
} ccsr_l2cache_t;
-
-/* DMA Registers(0x2_1000-0x2_2000) */
-
+/*
+ * DMA Registers(0x2_1000-0x2_2000)
+ */
typedef struct ccsr_dma {
char res1[256];
uint mr0; /* 0x21100 - DMA 0 Mode Register */
@@ -439,7 +437,9 @@
char res22[11516];
} ccsr_dma_t;
-/* tsec1 tsec2: 24000-26000 */
+/*
+ * tsec1 tsec2: 24000-26000
+ */
typedef struct ccsr_tsec {
char res1[16];
uint ievent; /* 0x24010 - Interrupt Event Register */
@@ -726,8 +726,9 @@
char res74[1024];
} ccsr_tsec_t;
-/* PIC Registers(0x2_6000-0x4_0000-0x8_0000) */
-
+/*
+ * PIC Registers(0x2_6000-0x4_0000-0x8_0000)
+ */
typedef struct ccsr_pic {
char res0[106496]; /* 0x26000-0x40000 */
char res1[64];
@@ -1033,15 +1034,18 @@
char res150[130892];
} ccsr_pic_t;
-/* CPM Block(0x8_0000-0xc_0000) */
+/*
+ * CPM Block(0x8_0000-0xc_0000)
+ */
#ifndef CONFIG_CPM2
typedef struct ccsr_cpm {
char res[262144];
} ccsr_cpm_t;
#else
-/* 0x8000-0x8ffff:DPARM */
-
-/* 0x9000-0x90bff: General SIU */
+/*
+ * 0x8000-0x8ffff:DPARM
+ * 0x9000-0x90bff: General SIU
+ */
typedef struct ccsr_cpm_siu {
char res1[80];
uint smaer;
@@ -1332,7 +1336,6 @@
char res1[16*1024];
u_char im_dpram2[16*1024];
char res2[16*1024];
-
ccsr_cpm_siu_t im_cpm_siu; /* SIU Configuration */
ccsr_cpm_intctl_t im_cpm_intctl; /* Interrupt Controller */
ccsr_cpm_iop_t im_cpm_iop; /* IO Port control/status */
@@ -1357,8 +1360,10 @@
ccsr_cpm_iram_t im_cpm_iram;
} ccsr_cpm_t;
#endif
-/* RapidIO Registers(0xc_0000-0xe_0000) */
+/*
+ * RapidIO Registers(0xc_0000-0xe_0000)
+ */
typedef struct ccsr_rio {
uint didcar; /* 0xc0000 - Device Identity Capability Register */
uint dicar; /* 0xc0004 - Device Information Capability Register */
@@ -1524,7 +1529,9 @@
char res58[60176];
} ccsr_rio_t;
-/* Global Utilities Register Block(0xe_0000-0xf_ffff) */
+/*
+ * Global Utilities Register Block(0xe_0000-0xf_ffff)
+ */
typedef struct ccsr_gur {
uint porpllsr; /* 0xe0000 - POR PLL ratio status register */
uint porbmsr; /* 0xe0004 - POR boot mode status register */
diff --git a/include/configs/MPC8349ADS.h b/include/configs/MPC8349ADS.h
index 4f4a99b..8daab31 100644
--- a/include/configs/MPC8349ADS.h
+++ b/include/configs/MPC8349ADS.h
@@ -73,8 +73,6 @@
#define CFG_MEMTEST_START 0x00000000 /* memtest region */
#define CFG_MEMTEST_END 0x00100000
-
-
/*
* DDR Setup
*/
@@ -85,25 +83,23 @@
#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
#if defined(CONFIG_SPD_EEPROM)
- /*
- * Determine DDR configuration from I2C interface.
- */
- #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
-
+ /*
+ * Determine DDR configuration from I2C interface.
+ */
+ #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
#else
- /*
- * Manually set up DDR parameters
- */
- #define CFG_DDR_SIZE 256 /* Mb */
- #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
- #define CFG_DDR_TIMING_1 0x37344321
- #define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
- #define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
- #define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
- #define CFG_DDR_INTERVAL 0x05200100 /* autocharge,no open page */
+ /*
+ * Manually set up DDR parameters
+ */
+ #define CFG_DDR_SIZE 256 /* Mb */
+ #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
+ #define CFG_DDR_TIMING_1 0x37344321
+ #define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
+ #define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
+ #define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
+ #define CFG_DDR_INTERVAL 0x05200100 /* autocharge,no open page */
#endif
-
/*
* SDRAM on the Local Bus
*/
@@ -126,7 +122,6 @@
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
#define CFG_LBLAWAR0_PRELIM 0x80000016 /* 16Mb window size */
-
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
#define CFG_MAX_FLASH_SECT 64 /* sectors per device */
@@ -137,7 +132,6 @@
#define CFG_MID_FLASH_JUMP 0x7F000000
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
-
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
#else
@@ -153,7 +147,6 @@
#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port-size=8bit, MSEL=GPCM */
#define CFG_OR1_PRELIM 0xFFFFE8f0 /* length 32K */
-
#define CONFIG_L1_INIT_RAM
#define CFG_INIT_RAM_LOCK 1
#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
@@ -198,11 +191,8 @@
*/
#define CFG_BR2_PRELIM 0xf0001861 /*Port-size=32bit, MSEL=SDRAM*/
-
-#define CFG_LBLAWBAR2_PRELIM 0xF0000000
-
-#define CFG_LBLAWAR2_PRELIM 0x80000019 /*64M*/
-
+#define CFG_LBLAWBAR2_PRELIM 0xF0000000
+#define CFG_LBLAWAR2_PRELIM 0x80000019 /*64M*/
/*
* The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
@@ -255,7 +245,7 @@
#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \
- | CFG_LBC_LSDMR_BSMA1516 \
+ | CFG_LBC_LSDMR_BSMA1516 \
| CFG_LBC_LSDMR_RFCR8 \
| CFG_LBC_LSDMR_PRETOACT6 \
| CFG_LBC_LSDMR_ACTTORW3 \
@@ -264,7 +254,6 @@
| CFG_LBC_LSDMR_CL3 \
)
-
/*
* SDRAM Controller configuration sequence.
*/
@@ -278,13 +267,8 @@
| CFG_LBC_LSDMR_OP_MRW)
#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
| CFG_LBC_LSDMR_OP_NORMAL)
-
#endif
-
-
-
-
/*
* Serial Port
*/
@@ -322,7 +306,6 @@
#define CFG_TSEC2_OFFSET 0x25000
#define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET)
-
/* IO Configuration */
#define CFG_IO_CONF (\
IO_CONF_UART |\
@@ -347,7 +330,6 @@
#define CFG_PCI1_IO_PHYS 0xe2000000
#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
-
#define CFG_PCI2_MEM_BASE 0xA0000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
@@ -356,10 +338,7 @@
#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
#if defined(CONFIG_PCI)
-//#define PCI_64BIT
#define PCI_ALL_PCI1
-//#define PCI_ONE_PCI1
-//#define PCI_TWO_PCI1
#if defined(PCI_64BIT)
#undef PCI_ALL_PCI1
#undef PCI_TWO_PCI1
@@ -373,9 +352,9 @@
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
- #define PCI_ENET0_IOADDR 0xFIXME
- #define PCI_ENET0_MEMADDR 0xFIXME
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+ #define PCI_ENET0_IOADDR 0xFIXME
+ #define PCI_ENET0_MEMADDR 0xFIXME
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
#endif
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
@@ -383,9 +362,7 @@
#endif /* CONFIG_PCI */
-
#if defined(CONFIG_TSEC_ENET)
-
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
@@ -405,55 +382,54 @@
#endif /* CONFIG_TSEC_ENET */
-
/*
* Environment
*/
#ifndef CFG_RAMBOOT
- #define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
- #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
- #define CFG_ENV_SIZE 0x2000
+ #define CFG_ENV_IS_IN_FLASH 1
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_SIZE 0x2000
#else
- #define CFG_NO_FLASH 1 /* Flash is not usable now */
- #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
- #define CFG_ENV_SIZE 0x2000
+ #define CFG_NO_FLASH 1 /* Flash is not usable now */
+ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+ #define CFG_ENV_SIZE 0x2000
#endif
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#if defined(CFG_RAMBOOT)
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
| CFG_CMD_PING \
| CFG_CMD_PCI \
| CFG_CMD_I2C) \
& \
~(CFG_CMD_ENV \
| CFG_CMD_LOADS))
- #else
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
+#else
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
| CFG_CMD_PING \
| CFG_CMD_I2C) \
& \
~(CFG_CMD_ENV \
| CFG_CMD_LOADS))
- #endif
+#endif
#else
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
| CFG_CMD_PCI \
| CFG_CMD_PING \
| CFG_CMD_I2C)
- #else
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
| CFG_CMD_PING \
| CFG_CMD_I2C \
| CFG_CMD_MII \
)
- #endif
+#endif
#endif
#include <cmd_confdefs.h>
@@ -468,9 +444,9 @@
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
- #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
- #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
@@ -529,7 +505,6 @@
HRCWH_TSEC2M_IN_GMII )
#endif
-
#define CFG_HID0_INIT 0x000000000
#define CFG_HID0_FINAL CFG_HID0_INIT
@@ -554,7 +529,6 @@
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
-
/*
* Environment Configuration
*/
@@ -565,13 +539,13 @@
#define CONFIG_ETH1ADDR 00:E0:0C:00:7D:01
#endif
-#define CONFIG_IPADDR 10.193.20.150
+#define CONFIG_IPADDR 192.168.1.253
#define CONFIG_HOSTNAME unknown
-#define CONFIG_ROOTPATH /tftpboot/10.193.20.150
-#define CONFIG_BOOTFILE /tftpboot/vmlinux.150
+#define CONFIG_ROOTPATH /nfsroot
+#define CONFIG_BOOTFILE your.uImage
-#define CONFIG_SERVERIP 10.193.20.58
+#define CONFIG_SERVERIP 192.168.1.1
#define CONFIG_GATEWAYIP 192.168.1.1
#define CONFIG_NETMASK 255.255.255.0
@@ -583,26 +557,26 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "consoledev=ttyS0\0" \
- "ramdiskaddr=400000\0" \
- "ramdiskfile=ramfs.83xx\0" \
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=400000\0" \
+ "ramdiskfile=ramfs.83xx\0"
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "bootm $loadaddr"
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "bootm $loadaddr"
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "bootm $loadaddr $ramdiskaddr"
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "bootm $loadaddr $ramdiskaddr"
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index 34cbe46..1af9231 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -51,10 +51,13 @@
/* sysclk for MPC8540EVAL */
#if defined(CONFIG_SYSCLK_66M)
-#define CONFIG_SYS_CLK_FREQ 66000000 /* the oscillator on board is 66Mhz */
- /* can also get 66M clock from external PCI */
+ /*
+ * the oscillator on board is 66Mhz
+ * can also get 66M clock from external PCI
+ */
+ #define CONFIG_SYS_CLK_FREQ 66000000
#else
- #define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */
+ #define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */
#endif
/* below can be toggled for performance analysis. otherwise use default */
@@ -194,11 +197,11 @@
#undef CONFIG_EEPRO100
#define CONFIG_TULIP
#define CONFIG_PCI_PNP /* do pci plug-and-play */
- #if !defined(CONFIG_PCI_PNP)
- #define PCI_ENET0_IOADDR 0xe0000000
- #define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/
- #endif
+#if !defined(CONFIG_PCI_PNP)
+#define PCI_ENET0_IOADDR 0xe0000000
+#define PCI_ENET0_MEMADDR 0xe0000000
+#define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/
+#endif
#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
#define CFG_PCI_SUBSYS_DEVICEID 0x0008
@@ -221,23 +224,23 @@
#define CONFIG_ETHPRIME "TSEC0"
#define CONFIG_PHY_M88E1011 1 /* GigaBit Ether PHY */
-#define INTEL_LXT971_PHY 1 /* on EVAL board. It is Davicom 9161 on ADS. */
+#define INTEL_LXT971_PHY 1
#endif
#undef DEBUG
/* Environment */
#ifndef CFG_RAMBOOT
- #if defined(CONFIG_RAM_AS_FLASH)
- #define CFG_ENV_IS_NOWHERE
- #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x100000)
- #define CFG_ENV_SIZE 0x2000
- #else
- #define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
- #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
- #endif
- #define CFG_ENV_SIZE 0x2000
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_ENV_IS_NOWHERE
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x100000)
+#define CFG_ENV_SIZE 0x2000
+#else
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+#endif
+#define CFG_ENV_SIZE 0x2000
#else
/* #define CFG_NO_FLASH 1 */ /* Flash is not usable now */
#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
@@ -245,7 +248,6 @@
#define CFG_ENV_SIZE 0x2000
#endif
-/*#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.1.10:/tftproot/192.168.1.11 ip=192.168.1.11:192.168.1.10:192.168.1.0:255.255.255.0:mpc8540ads-003:eth0:off console=ttyS0,115200"*/
#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"
#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000"
#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */
@@ -254,21 +256,24 @@
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_PCI | CFG_CMD_I2C ) & \
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING \
+ | CFG_CMD_PCI | CFG_CMD_I2C ) & \
~(CFG_CMD_ENV | CFG_CMD_LOADS ))
- #else
- #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C ) & \
- ~(CFG_CMD_ENV | \
- CFG_CMD_LOADS ))
- #endif
#else
- #if defined(CONFIG_PCI)
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_PING | CFG_CMD_I2C )
- #else
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C )
- #endif
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING \
+ | CFG_CMD_I2C ) & \
+ ~(CFG_CMD_ENV | CFG_CMD_LOADS ))
#endif
+#else
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI \
+ | CFG_CMD_PING | CFG_CMD_I2C )
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C )
+#endif
+#endif
+
#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 5161df8..38f7115 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -53,10 +53,10 @@
/*
* Watchdog
*/
-#define SWCRR 0x0204
+#define SWCRR 0x0204
#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */
#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */
-#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit. */
+#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit. */
#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */
#define SWCRR_RES ~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
@@ -172,7 +172,7 @@
/*
* Hard Reset Configration Word - High
- */
+ */
#define HRCWH_PCI_AGENT 0x00000000
#define HRCWH_PCI_HOST 0x80000000
@@ -195,8 +195,8 @@
#define HRCWH_BOOTSEQ_NORMAL 0x01000000
#define HRCWH_BOOTSEQ_EXTENDED 0x02000000
-#define HRCWH_SW_WATCHDOG_DISABLE 0x00000000
-#define HRCWH_SW_WATCHDOG_ENABLE 0x00800000
+#define HRCWH_SW_WATCHDOG_DISABLE 0x00000000
+#define HRCWH_SW_WATCHDOG_ENABLE 0x00800000
#define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000
#define HRCWH_ROM_LOC_PCI1 0x00100000
@@ -257,7 +257,7 @@
#define HRCWL_CORE_TO_CSB_3X1 0x00060000
/*
- * LCRR - Clock Ratio Register (10.3.1.16)
+ * LCRR - Clock Ratio Register (10.3.1.16)
*/
#define LCRR_DBYP 0x80000000
#define LCRR_DBYP_SHIFT 31
@@ -284,6 +284,5 @@
#define LCRR_CLKDIV_4 0x00000004
#define LCRR_CLKDIV_8 0x00000008
#define LCRR_CLKDIV_SHIFT 0
-
#endif /* __MPC83XX_H__ */
diff --git a/include/spd.h b/include/spd.h
index acbc1e1..54b60d1 100644
--- a/include/spd.h
+++ b/include/spd.h
@@ -103,6 +103,4 @@
#define SPD_MEMTYPE_DDR (0x07)
#define SPD_MEMTYPE_DDR2 (0x08)
-
#endif /* _SPD_H_ */
-