arch: arm: dts: fsl-lx2160a.dtsi: sync serial nodes with Linux
Sync the serial nodes of the LX2160A based boards with their
representation in Linux. We also imported the clockgen and sysclk nodes
which are dependencies.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
diff --git a/arch/arm/dts/fsl-lx2160a-qds.dtsi b/arch/arm/dts/fsl-lx2160a-qds.dtsi
index 6635c52..e96605b 100644
--- a/arch/arm/dts/fsl-lx2160a-qds.dtsi
+++ b/arch/arm/dts/fsl-lx2160a-qds.dtsi
@@ -2,7 +2,7 @@
/*
* NXP LX2160AQDS common device tree source
*
- * Copyright 2018-2020 NXP
+ * Copyright 2018-2020, 2023 NXP
*
*/
@@ -11,6 +11,7 @@
/ {
aliases {
spi0 = &fspi;
+ serial0 = &uart0;
};
};
@@ -286,3 +287,11 @@
&sata3 {
status = "okay";
};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts
index 3994097..aaa5959 100644
--- a/arch/arm/dts/fsl-lx2160a-rdb.dts
+++ b/arch/arm/dts/fsl-lx2160a-rdb.dts
@@ -5,7 +5,7 @@
* Author: Priyanka Jain <priyanka.jain@nxp.com>
* Sriram Dash <sriram.dash@nxp.com>
*
- * Copyright 2018 NXP
+ * Copyright 2018, 2023 NXP
*
*/
@@ -18,6 +18,7 @@
compatible = "fsl,lx2160ardb", "fsl,lx2160a";
aliases {
spi0 = &fspi;
+ serial0 = &uart0;
};
};
@@ -137,3 +138,11 @@
&sata3 {
status = "okay";
};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi
index 58a408d..0b0f317 100644
--- a/arch/arm/dts/fsl-lx2160a.dtsi
+++ b/arch/arm/dts/fsl-lx2160a.dtsi
@@ -2,7 +2,7 @@
/*
* NXP lx2160a SOC common device tree source
*
- * Copyright 2018-2021 NXP
+ * Copyright 2018-2021, 2023 NXP
*
*/
@@ -35,30 +35,34 @@
dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
uart0: serial@21c0000 {
- compatible = "arm,pl011";
+ compatible = "arm,sbsa-uart","arm,pl011";
reg = <0x0 0x21c0000 0x0 0x1000>;
- clocks = <&clockgen 4 0>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
status = "disabled";
};
uart1: serial@21d0000 {
- compatible = "arm,pl011";
+ compatible = "arm,sbsa-uart","arm,pl011";
reg = <0x0 0x21d0000 0x0 0x1000>;
- clocks = <&clockgen 4 0>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
status = "disabled";
};
uart2: serial@21e0000 {
- compatible = "arm,pl011";
+ compatible = "arm,sbsa-uart","arm,pl011";
reg = <0x0 0x21e0000 0x0 0x1000>;
- clocks = <&clockgen 4 0>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
status = "disabled";
};
uart3: serial@21f0000 {
- compatible = "arm,pl011";
+ compatible = "arm,sbsa-uart","arm,pl011";
reg = <0x0 0x21f0000 0x0 0x1000>;
- clocks = <&clockgen 4 0>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
status = "disabled";
};
};