Initial support for MPC8641 HPCN board.
diff --git a/cpu/mpc86xx/cache.S b/cpu/mpc86xx/cache.S
new file mode 100644
index 0000000..75186b1
--- /dev/null
+++ b/cpu/mpc86xx/cache.S
@@ -0,0 +1,368 @@
+#include <config.h>
+#include <mpc86xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CACHE_LINE_SIZE
+# define CACHE_LINE_SIZE L1_CACHE_BYTES
+#endif
+
+#if CACHE_LINE_SIZE == 128
+#define LG_CACHE_LINE_SIZE 7
+#elif CACHE_LINE_SIZE == 32
+#define LG_CACHE_LINE_SIZE 5
+#elif CACHE_LINE_SIZE == 16
+#define LG_CACHE_LINE_SIZE 4
+#elif CACHE_LINE_SIZE == 8
+#define LG_CACHE_LINE_SIZE 3
+#else
+# error "Invalid cache line size!"
+#endif
+
+/*
+ * Most of this code is taken from 74xx_7xx/cache.S
+ * and then cleaned up a bit
+ */
+
+/*
+ * Invalidate L1 instruction cache.
+ */
+_GLOBAL(invalidate_l1_instruction_cache)
+ /* use invalidate-all bit in HID0 */
+ mfspr r3,HID0
+ ori r3,r3,HID0_ICFI
+ mtspr HID0,r3
+ isync
+ blr
+
+/*
+ * Invalidate L1 data cache.
+ */
+_GLOBAL(invalidate_l1_data_cache)
+ mfspr r3,HID0
+ ori r3,r3,HID0_DCFI
+ mtspr HID0,r3
+ isync
+ blr
+
+/*
+ * Flush data cache.
+ */
+_GLOBAL(flush_data_cache)
+ lis r3,0
+ lis r5,CACHE_LINE_SIZE
+flush:
+ cmp 0,1,r3,r5
+ bge done
+ lwz r5,0(r3)
+ lis r5,CACHE_LINE_SIZE
+ addi r3,r3,0x4
+ b flush
+done:
+ blr
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ * This is a no-op on the 601.
+ *
+ * flush_icache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_icache_range)
+ li r5,CACHE_LINE_SIZE-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,LG_CACHE_LINE_SIZE
+ beqlr
+ mtctr r4
+ mr r6,r3
+1: dcbst 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ mtctr r4
+2: icbi 0,r6
+ addi r6,r6,CACHE_LINE_SIZE
+ bdnz 2b
+ sync /* additional sync needed on g4 */
+ isync
+ blr
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ *
+ * clean_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(clean_dcache_range)
+ li r5,CACHE_LINE_SIZE-1
+ andc r3,r3,r5 /* align r3 down to cache line */
+ subf r4,r3,r4 /* r4 = offset of stop from start of cache line */
+ add r4,r4,r5 /* r4 += cache_line_size-1 */
+ srwi. r4,r4,LG_CACHE_LINE_SIZE /* r4 = number of cache lines to flush */
+ beqlr /* if r4 == 0 return */
+ mtctr r4 /* ctr = r4 */
+
+ sync
+1: dcbst 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ blr
+
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ *
+ * flush_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_dcache_range)
+ li r5,CACHE_LINE_SIZE-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,LG_CACHE_LINE_SIZE
+ beqlr
+ mtctr r4
+
+ sync
+1: dcbf 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbf's to get to ram */
+ blr
+
+/*
+ * Like above, but invalidate the D-cache. This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ *
+ * invalidate_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(invalidate_dcache_range)
+ li r5,CACHE_LINE_SIZE-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,LG_CACHE_LINE_SIZE
+ beqlr
+ mtctr r4
+
+ sync
+1: dcbi 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbi's to get to ram */
+ blr
+
+/*
+ * Flush a particular page from the data cache to RAM.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ *
+ * void __flush_page_to_ram(void *page)
+ */
+_GLOBAL(__flush_page_to_ram)
+ rlwinm r3,r3,0,0,19 /* Get page base address */
+ li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
+ mtctr r4
+ mr r6,r3
+0: dcbst 0,r3 /* Write line to ram */
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 0b
+ sync
+ mtctr r4
+1: icbi 0,r6
+ addi r6,r6,CACHE_LINE_SIZE
+ bdnz 1b
+ sync
+ isync
+ blr
+
+/*
+ * Flush a particular page from the instruction cache.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ *
+ * void __flush_icache_page(void *page)
+ */
+_GLOBAL(__flush_icache_page)
+ li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
+ mtctr r4
+1: icbi 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync
+ isync
+ blr
+
+/*
+ * Clear a page using the dcbz instruction, which doesn't cause any
+ * memory traffic (except to write out any cache lines which get
+ * displaced). This only works on cacheable memory.
+ */
+_GLOBAL(clear_page)
+ li r0,4096/CACHE_LINE_SIZE
+ mtctr r0
+1: dcbz 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ blr
+
+/*
+ * Enable L1 Instruction cache
+ */
+_GLOBAL(icache_enable)
+ mfspr r3, HID0
+ li r5, HID0_ICFI|HID0_ILOCK
+ andc r3, r3, r5
+ ori r3, r3, HID0_ICE
+ ori r5, r3, HID0_ICFI
+ mtspr HID0, r5
+ mtspr HID0, r3
+ isync
+ blr
+
+/*
+ * Disable L1 Instruction cache
+ */
+_GLOBAL(icache_disable)
+ mfspr r3, HID0
+ li r5, 0
+ ori r5, r5, HID0_ICE
+ andc r3, r3, r5
+ mtspr HID0, r3
+ isync
+ blr
+
+/*
+ * Is instruction cache enabled?
+ */
+_GLOBAL(icache_status)
+ mfspr r3, HID0
+ andi. r3, r3, HID0_ICE
+ blr
+
+
+_GLOBAL(l1dcache_enable)
+ mfspr r3, HID0
+ li r5, HID0_DCFI|HID0_DLOCK
+ andc r3, r3, r5
+ mtspr HID0, r3 /* no invalidate, unlock */
+ ori r3, r3, HID0_DCE
+ ori r5, r3, HID0_DCFI
+ mtspr HID0, r5 /* enable + invalidate */
+ mtspr HID0, r3 /* enable */
+ sync
+ blr
+
+/*
+ * Enable data cache(s) - L1 and optionally L2
+ * Calls l2cache_enable. LR saved in r5
+ */
+_GLOBAL(dcache_enable)
+ mfspr r3, HID0
+ li r5, HID0_DCFI|HID0_DLOCK
+ andc r3, r3, r5
+ mtspr HID0, r3 /* no invalidate, unlock */
+ ori r3, r3, HID0_DCE
+ ori r5, r3, HID0_DCFI
+ mtspr HID0, r5 /* enable + invalidate */
+ mtspr HID0, r3 /* enable */
+ sync
+#ifdef CFG_L2
+ mflr r5
+ bl l2cache_enable /* uses r3 and r4 */
+ sync
+ mtlr r5
+#endif
+ blr
+
+
+/*
+ * Disable data cache(s) - L1 and optionally L2
+ * Calls flush_data_cache and l2cache_disable_no_flush.
+ * LR saved in r4
+ */
+_GLOBAL(dcache_disable)
+ mflr r4 /* save link register */
+ bl flush_data_cache /* uses r3 and r5 */
+ sync
+ mfspr r3, HID0
+ li r5, HID0_DCFI|HID0_DLOCK
+ andc r3, r3, r5
+ mtspr HID0, r3 /* no invalidate, unlock */
+ li r5, HID0_DCE|HID0_DCFI
+ andc r3, r3, r5 /* no enable, no invalidate */
+ mtspr HID0, r3
+ sync
+#ifdef CFG_L2
+ bl l2cache_disable_no_flush /* uses r3 */
+#endif
+ mtlr r4 /* restore link register */
+ blr
+
+/*
+ * Is data cache enabled?
+ */
+_GLOBAL(dcache_status)
+ mfspr r3, HID0
+ andi. r3, r3, HID0_DCE
+ blr
+
+/*
+ * Invalidate L2 cache using L2I and polling L2IP
+ */
+_GLOBAL(l2cache_invalidate)
+ sync
+ oris r3, r3, L2CR_L2I@h
+ sync
+ mtspr l2cr, r3
+ sync
+invl2:
+ mfspr r3, l2cr
+ andi. r3, r3, L2CR_L2IP
+ bne invl2
+ /* turn off the global invalidate bit */
+ mfspr r3, l2cr
+ rlwinm r3, r3, 0, 11, 9
+ sync
+ mtspr l2cr, r3
+ sync
+ blr
+
+/*
+ * Enable L2 cache
+ * Calls l2cache_invalidate. LR is saved in r4
+ */
+_GLOBAL(l2cache_enable)
+ mflr r4 /* save link register */
+ bl l2cache_invalidate /* uses r3 */
+ sync
+ lis r3, L2_ENABLE@h
+ ori r3, r3, L2_ENABLE@l
+ mtspr l2cr, r3
+ isync
+ mtlr r4 /* restore link register */
+ blr
+
+/*
+ * Disable L2 cache
+ * Calls flush_data_cache. LR is saved in r4
+ */
+_GLOBAL(l2cache_disable)
+ mflr r4 /* save link register */
+ bl flush_data_cache /* uses r3 and r5 */
+ sync
+ mtlr r4 /* restore link register */
+l2cache_disable_no_flush: /* provide way to disable L2 w/o flushing */
+ lis r3, L2_INIT@h
+ ori r3, r3, L2_INIT@l
+ mtspr l2cr, r3
+ isync
+ blr