arm: mediatek: merge board Kconfigs into mach-mediatek
On MediaTek boards we cannot override the SYS_BOARD / SYS_CONFIG_NAME
variables from defconfig.
This is because in board/mediatek/mtXXXX/Kconfig this value was override
by default due to the if CONFIG_TARGET_MTXXXX condition.
Merge all the Kconfigs to the mach-medatek/Kconfig.
This way:
- we only define SYS_{SOC,VENDOR} once
- all board definitions are in a single place, simplifying the build logic.
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
index 134b6b1..f79a5c6 100644
--- a/arch/arm/mach-mediatek/Kconfig
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -79,12 +79,40 @@
endchoice
-source "board/mediatek/mt7622/Kconfig"
-source "board/mediatek/mt7623/Kconfig"
-source "board/mediatek/mt7629/Kconfig"
-source "board/mediatek/mt8183/Kconfig"
-source "board/mediatek/mt8512/Kconfig"
-source "board/mediatek/mt8516/Kconfig"
-source "board/mediatek/mt8518/Kconfig"
+config SYS_BOARD
+ string "Board name"
+ default "mt7622" if TARGET_MT7622
+ default "mt7623" if TARGET_MT7623
+ default "mt7629" if TARGET_MT7629
+ default "mt8183" if TARGET_MT8183
+ default "mt8512" if TARGET_MT8512
+ default "mt8516" if TARGET_MT8516
+ default "mt8518" if TARGET_MT8518
+ default ""
+ help
+ This option contains information about board name.
+ Based on this option board/<CONFIG_SYS_VENDOR>/<CONFIG_SYS_BOARD> will
+ be used.
+
+config SYS_CONFIG_NAME
+ string "Board configuration name"
+ default "mt7622" if TARGET_MT7622
+ default "mt7623" if TARGET_MT7623
+ default "mt7629" if TARGET_MT7629
+ default "mt8183" if TARGET_MT8183
+ default "mt8512" if TARGET_MT8512
+ default "mt8516" if TARGET_MT8516
+ default "mt8518" if TARGET_MT8518
+ default ""
+ help
+ This option contains information about board configuration name.
+ Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
+ will be used for board configuration.
+
+config MTK_BROM_HEADER_INFO
+ string
+ default "media=nor" if TARGET_MT8518 || TARGET_MT8512 || TARGET_MT7629 || TARGET_MT7622
+ default "media=emmc" if TARGET_MT8516 || TARGET_MT8365 || TARGET_MT8183
+ default "lk=1" if TARGET_MT7623
endif
diff --git a/arch/mips/mach-mtmips/Kconfig b/arch/mips/mach-mtmips/Kconfig
index 9f300a9..151b004 100644
--- a/arch/mips/mach-mtmips/Kconfig
+++ b/arch/mips/mach-mtmips/Kconfig
@@ -1,6 +1,9 @@
menu "MediaTek MIPS platforms"
depends on ARCH_MTMIPS
+config SYS_VENDOR
+ default "mediatek" if BOARD_MT7628_RFB || BOARD_MT7620_RFB || BOARD_MT7620_MT7530_RFB
+
config SYS_MALLOC_F_LEN
default 0x1000
diff --git a/arch/mips/mach-mtmips/mt7620/Kconfig b/arch/mips/mach-mtmips/mt7620/Kconfig
index 5db83eb..3ca711a 100644
--- a/arch/mips/mach-mtmips/mt7620/Kconfig
+++ b/arch/mips/mach-mtmips/mt7620/Kconfig
@@ -66,6 +66,12 @@
default 6 if CPU_FREQ_600MHZ
default 7 if CPU_FREQ_620MHZ
-source "board/mediatek/mt7620/Kconfig"
+config SYS_CONFIG_NAME
+ string "Board configuration name"
+ default "mt7620" if BOARD_MT7620_RFB || BOARD_MT7620_MT7530_RFB
+
+config SYS_BOARD
+ string "Board name"
+ default "mt7620" if BOARD_MT7620_RFB || BOARD_MT7620_MT7530_RFB
endif
diff --git a/arch/mips/mach-mtmips/mt7628/Kconfig b/arch/mips/mach-mtmips/mt7628/Kconfig
index f451c15..e727359 100644
--- a/arch/mips/mach-mtmips/mt7628/Kconfig
+++ b/arch/mips/mach-mtmips/mt7628/Kconfig
@@ -44,8 +44,15 @@
Select this if the UART2 of your board is connected to GPIO 16/17
(shared with SPIS) rather than the usual GPIO 20/21.
+config SYS_BOARD
+ string "Board name"
+ default "mt7628" if BOARD_MT7628_RFB
+
+config SYS_CONFIG_NAME
+ string "Board configuration name"
+ default "mt7628" if BOARD_MT7628_RFB
+
source "board/gardena/smart-gateway-mt7688/Kconfig"
-source "board/mediatek/mt7628/Kconfig"
source "board/seeed/linkit-smart-7688/Kconfig"
source "board/vocore/vocore2/Kconfig"