rockchip: pinctrl: Add rk3328 gmac pinctrl support
Need to set gmac m1 pins iomux, gmac m0 tx pins, select bit2
and bit10 at com iomux register. After that, set rgmii m1 tx
pins to 12ma drive-strength, and clean others to 2ma.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3328.c b/drivers/pinctrl/rockchip/pinctrl_rk3328.c
index 3c2253f..fa2356a 100644
--- a/drivers/pinctrl/rockchip/pinctrl_rk3328.c
+++ b/drivers/pinctrl/rockchip/pinctrl_rk3328.c
@@ -31,6 +31,37 @@
GPIO0A7_SEL_MASK = 3 << GPIO0A7_SEL_SHIFT,
GPIO0A7_EMMC_DATA0 = 2,
+ /* GPIO0B_IOMUX*/
+ GPIO0B0_SEL_SHIFT = 0,
+ GPIO0B0_SEL_MASK = 3 << GPIO0B0_SEL_SHIFT,
+ GPIO0B0_GAMC_CLKTXM0 = 1,
+
+ GPIO0B4_SEL_SHIFT = 8,
+ GPIO0B4_SEL_MASK = 3 << GPIO0B4_SEL_SHIFT,
+ GPIO0B4_GAMC_TXENM0 = 1,
+
+ /* GPIO0C_IOMUX*/
+ GPIO0C0_SEL_SHIFT = 0,
+ GPIO0C0_SEL_MASK = 3 << GPIO0C0_SEL_SHIFT,
+ GPIO0C0_GAMC_TXD1M0 = 1,
+
+ GPIO0C1_SEL_SHIFT = 2,
+ GPIO0C1_SEL_MASK = 3 << GPIO0C1_SEL_SHIFT,
+ GPIO0C1_GAMC_TXD0M0 = 1,
+
+ GPIO0C6_SEL_SHIFT = 12,
+ GPIO0C6_SEL_MASK = 3 << GPIO0C6_SEL_SHIFT,
+ GPIO0C6_GAMC_TXD2M0 = 1,
+
+ GPIO0C7_SEL_SHIFT = 14,
+ GPIO0C7_SEL_MASK = 3 << GPIO0C7_SEL_SHIFT,
+ GPIO0C7_GAMC_TXD3M0 = 1,
+
+ /* GPIO0D_IOMUX*/
+ GPIO0D0_SEL_SHIFT = 0,
+ GPIO0D0_SEL_MASK = 3 << GPIO0D0_SEL_SHIFT,
+ GPIO0D0_GMAC_CLKM0 = 1,
+
GPIO0D6_SEL_SHIFT = 12,
GPIO0D6_SEL_MASK = 3 << GPIO0D6_SEL_SHIFT,
GPIO0D6_GPIO = 0,
@@ -41,6 +72,69 @@
GPIO1A0_SEL_MASK = 0x3fff << GPIO1A0_SEL_SHIFT,
GPIO1A0_CARD_DATA_CLK_CMD_DETN = 0x1555,
+ /* GPIO1B_IOMUX */
+ GPIO1B0_SEL_SHIFT = 0,
+ GPIO1B0_SEL_MASK = 3 << GPIO1B0_SEL_SHIFT,
+ GPIO1B0_GMAC_TXD1M1 = 2,
+
+ GPIO1B1_SEL_SHIFT = 2,
+ GPIO1B1_SEL_MASK = 3 << GPIO1B1_SEL_SHIFT,
+ GPIO1B1_GMAC_TXD0M1 = 2,
+
+ GPIO1B2_SEL_SHIFT = 4,
+ GPIO1B2_SEL_MASK = 3 << GPIO1B2_SEL_SHIFT,
+ GPIO1B2_GMAC_RXD1M1 = 2,
+
+ GPIO1B3_SEL_SHIFT = 6,
+ GPIO1B3_SEL_MASK = 3 << GPIO1B3_SEL_SHIFT,
+ GPIO1B3_GMAC_RXD0M1 = 2,
+
+ GPIO1B4_SEL_SHIFT = 8,
+ GPIO1B4_SEL_MASK = 3 << GPIO1B4_SEL_SHIFT,
+ GPIO1B4_GMAC_TXCLKM1 = 2,
+
+ GPIO1B5_SEL_SHIFT = 10,
+ GPIO1B5_SEL_MASK = 3 << GPIO1B5_SEL_SHIFT,
+ GPIO1B5_GMAC_RXCLKM1 = 2,
+
+ GPIO1B6_SEL_SHIFT = 12,
+ GPIO1B6_SEL_MASK = 3 << GPIO1B6_SEL_SHIFT,
+ GPIO1B6_GMAC_RXD3M1 = 2,
+
+ GPIO1B7_SEL_SHIFT = 14,
+ GPIO1B7_SEL_MASK = 3 << GPIO1B7_SEL_SHIFT,
+ GPIO1B7_GMAC_RXD2M1 = 2,
+
+ /* GPIO1C_IOMUX */
+ GPIO1C0_SEL_SHIFT = 0,
+ GPIO1C0_SEL_MASK = 3 << GPIO1C0_SEL_SHIFT,
+ GPIO1C0_GMAC_TXD3M1 = 2,
+
+ GPIO1C1_SEL_SHIFT = 2,
+ GPIO1C1_SEL_MASK = 3 << GPIO1C1_SEL_SHIFT,
+ GPIO1C1_GMAC_TXD2M1 = 2,
+
+ GPIO1C3_SEL_SHIFT = 6,
+ GPIO1C3_SEL_MASK = 3 << GPIO1C3_SEL_SHIFT,
+ GPIO1C3_GMAC_MDIOM1 = 2,
+
+ GPIO1C5_SEL_SHIFT = 10,
+ GPIO1C5_SEL_MASK = 3 << GPIO1C5_SEL_SHIFT,
+ GPIO1C5_GMAC_CLKM1 = 2,
+
+ GPIO1C6_SEL_SHIFT = 12,
+ GPIO1C6_SEL_MASK = 3 << GPIO1C6_SEL_SHIFT,
+ GPIO1C6_GMAC_RXDVM1 = 2,
+
+ GPIO1C7_SEL_SHIFT = 14,
+ GPIO1C7_SEL_MASK = 3 << GPIO1C7_SEL_SHIFT,
+ GPIO1C7_GMAC_MDCM1 = 2,
+
+ /* GPIO1D_IOMUX */
+ GPIO1D1_SEL_SHIFT = 2,
+ GPIO1D1_SEL_MASK = 3 << GPIO1D1_SEL_SHIFT,
+ GPIO1D1_GMAC_TXENM1 = 2,
+
/* GPIO2A_IOMUX */
GPIO2A0_SEL_SHIFT = 0,
GPIO2A0_SEL_MASK = 3 << GPIO2A0_SEL_SHIFT,
@@ -118,6 +212,11 @@
IOMUX_SEL_UART2_M0 = 0,
IOMUX_SEL_UART2_M1,
+ IOMUX_SEL_GMAC_SHIFT = 2,
+ IOMUX_SEL_GMAC_MASK = 1 << IOMUX_SEL_GMAC_SHIFT,
+ IOMUX_SEL_GMAC_M0 = 0,
+ IOMUX_SEL_GMAC_M1,
+
IOMUX_SEL_SPI_SHIFT = 4,
IOMUX_SEL_SPI_MASK = 3 << IOMUX_SEL_SPI_SHIFT,
IOMUX_SEL_SPI_M0 = 0,
@@ -128,6 +227,55 @@
IOMUX_SEL_SDMMC_MASK = 1 << IOMUX_SEL_SDMMC_SHIFT,
IOMUX_SEL_SDMMC_M0 = 0,
IOMUX_SEL_SDMMC_M1,
+
+ IOMUX_SEL_GMACM1_OPTIMIZATION_SHIFT = 10,
+ IOMUX_SEL_GMACM1_OPTIMIZATION_MASK = 1 << IOMUX_SEL_GMACM1_OPTIMIZATION_SHIFT,
+ IOMUX_SEL_GMACM1_OPTIMIZATION_BEFORE = 0,
+ IOMUX_SEL_GMACM1_OPTIMIZATION_AFTER,
+
+ /* GRF_GPIO1B_E */
+ GRF_GPIO1B0_E_SHIFT = 0,
+ GRF_GPIO1B0_E_MASK = 3 << GRF_GPIO1B0_E_SHIFT,
+ GRF_GPIO1B1_E_SHIFT = 2,
+ GRF_GPIO1B1_E_MASK = 3 << GRF_GPIO1B1_E_SHIFT,
+ GRF_GPIO1B2_E_SHIFT = 4,
+ GRF_GPIO1B2_E_MASK = 3 << GRF_GPIO1B2_E_SHIFT,
+ GRF_GPIO1B3_E_SHIFT = 6,
+ GRF_GPIO1B3_E_MASK = 3 << GRF_GPIO1B3_E_SHIFT,
+ GRF_GPIO1B4_E_SHIFT = 8,
+ GRF_GPIO1B4_E_MASK = 3 << GRF_GPIO1B4_E_SHIFT,
+ GRF_GPIO1B5_E_SHIFT = 10,
+ GRF_GPIO1B5_E_MASK = 3 << GRF_GPIO1B5_E_SHIFT,
+ GRF_GPIO1B6_E_SHIFT = 12,
+ GRF_GPIO1B6_E_MASK = 3 << GRF_GPIO1B6_E_SHIFT,
+ GRF_GPIO1B7_E_SHIFT = 14,
+ GRF_GPIO1B7_E_MASK = 3 << GRF_GPIO1B7_E_SHIFT,
+
+ /* GRF_GPIO1C_E */
+ GRF_GPIO1C0_E_SHIFT = 0,
+ GRF_GPIO1C0_E_MASK = 3 << GRF_GPIO1C0_E_SHIFT,
+ GRF_GPIO1C1_E_SHIFT = 2,
+ GRF_GPIO1C1_E_MASK = 3 << GRF_GPIO1C1_E_SHIFT,
+ GRF_GPIO1C3_E_SHIFT = 6,
+ GRF_GPIO1C3_E_MASK = 3 << GRF_GPIO1C3_E_SHIFT,
+ GRF_GPIO1C5_E_SHIFT = 10,
+ GRF_GPIO1C5_E_MASK = 3 << GRF_GPIO1C5_E_SHIFT,
+ GRF_GPIO1C6_E_SHIFT = 12,
+ GRF_GPIO1C6_E_MASK = 3 << GRF_GPIO1C6_E_SHIFT,
+ GRF_GPIO1C7_E_SHIFT = 14,
+ GRF_GPIO1C7_E_MASK = 3 << GRF_GPIO1C7_E_SHIFT,
+
+ /* GRF_GPIO1D_E */
+ GRF_GPIO1D1_E_SHIFT = 2,
+ GRF_GPIO1D1_E_MASK = 3 << GRF_GPIO1D1_E_SHIFT,
+};
+
+/* GPIO Bias drive strength settings */
+enum GPIO_BIAS {
+ GPIO_BIAS_2MA = 0,
+ GPIO_BIAS_4MA,
+ GPIO_BIAS_8MA,
+ GPIO_BIAS_12MA,
};
struct rk3328_pinctrl_priv {
@@ -313,6 +461,124 @@
}
}
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+static void pinctrl_rk3328_gmac_config(struct rk3328_grf_regs *grf, int gmac_id)
+{
+ switch (gmac_id) {
+ case PERIPH_ID_GMAC:
+ /* set rgmii m1 pins mux */
+ rk_clrsetreg(&grf->gpio1b_iomux,
+ GPIO1B0_SEL_MASK |
+ GPIO1B1_SEL_MASK |
+ GPIO1B2_SEL_MASK |
+ GPIO1B3_SEL_MASK |
+ GPIO1B4_SEL_MASK |
+ GPIO1B5_SEL_MASK |
+ GPIO1B6_SEL_MASK |
+ GPIO1B7_SEL_MASK,
+ GPIO1B0_GMAC_TXD1M1 << GPIO1B0_SEL_SHIFT |
+ GPIO1B1_GMAC_TXD0M1 << GPIO1B1_SEL_SHIFT |
+ GPIO1B2_GMAC_RXD1M1 << GPIO1B2_SEL_SHIFT |
+ GPIO1B3_GMAC_RXD0M1 << GPIO1B3_SEL_SHIFT |
+ GPIO1B4_GMAC_TXCLKM1 << GPIO1B4_SEL_SHIFT |
+ GPIO1B5_GMAC_RXCLKM1 << GPIO1B5_SEL_SHIFT |
+ GPIO1B6_GMAC_RXD3M1 << GPIO1B6_SEL_SHIFT |
+ GPIO1B7_GMAC_RXD2M1 << GPIO1B7_SEL_SHIFT);
+
+ rk_clrsetreg(&grf->gpio1c_iomux,
+ GPIO1C0_SEL_MASK |
+ GPIO1C1_SEL_MASK |
+ GPIO1C3_SEL_MASK |
+ GPIO1C5_SEL_MASK |
+ GPIO1C6_SEL_MASK |
+ GPIO1C7_SEL_MASK,
+ GPIO1C0_GMAC_TXD3M1 << GPIO1C0_SEL_SHIFT |
+ GPIO1C1_GMAC_TXD2M1 << GPIO1C1_SEL_SHIFT |
+ GPIO1C3_GMAC_MDIOM1 << GPIO1C3_SEL_SHIFT |
+ GPIO1C5_GMAC_CLKM1 << GPIO1C5_SEL_SHIFT |
+ GPIO1C6_GMAC_RXDVM1 << GPIO1C6_SEL_SHIFT |
+ GPIO1C7_GMAC_MDCM1 << GPIO1C7_SEL_SHIFT);
+
+ rk_clrsetreg(&grf->gpio1d_iomux,
+ GPIO1D1_SEL_MASK,
+ GPIO1D1_GMAC_TXENM1 << GPIO1D1_SEL_SHIFT);
+
+ /* set rgmii m0 tx pins mux */
+ rk_clrsetreg(&grf->gpio0b_iomux,
+ GPIO0B0_SEL_MASK |
+ GPIO0B4_SEL_MASK,
+ GPIO0B0_GAMC_CLKTXM0 << GPIO0B0_SEL_SHIFT |
+ GPIO0B4_GAMC_TXENM0 << GPIO0B4_SEL_SHIFT);
+
+ rk_clrsetreg(&grf->gpio0c_iomux,
+ GPIO0C0_SEL_MASK |
+ GPIO0C1_SEL_MASK |
+ GPIO0C6_SEL_MASK |
+ GPIO0C7_SEL_MASK,
+ GPIO0C0_GAMC_TXD1M0 << GPIO0C0_SEL_SHIFT |
+ GPIO0C1_GAMC_TXD0M0 << GPIO0C1_SEL_SHIFT |
+ GPIO0C6_GAMC_TXD2M0 << GPIO0C6_SEL_SHIFT |
+ GPIO0C7_GAMC_TXD3M0 << GPIO0C7_SEL_SHIFT);
+
+ rk_clrsetreg(&grf->gpio0d_iomux,
+ GPIO0D0_SEL_MASK,
+ GPIO0D0_GMAC_CLKM0 << GPIO0D0_SEL_SHIFT);
+
+ /* set com mux */
+ rk_clrsetreg(&grf->com_iomux,
+ IOMUX_SEL_GMAC_MASK |
+ IOMUX_SEL_GMACM1_OPTIMIZATION_MASK,
+ IOMUX_SEL_GMAC_M1 << IOMUX_SEL_GMAC_SHIFT |
+ IOMUX_SEL_GMACM1_OPTIMIZATION_AFTER <<
+ IOMUX_SEL_GMACM1_OPTIMIZATION_SHIFT);
+
+ /*
+ * set rgmii m1 tx pins to 12ma drive-strength,
+ * and clean others to 2ma.
+ */
+ rk_clrsetreg(&grf->gpio1b_e,
+ GRF_GPIO1B0_E_MASK |
+ GRF_GPIO1B1_E_MASK |
+ GRF_GPIO1B2_E_MASK |
+ GRF_GPIO1B3_E_MASK |
+ GRF_GPIO1B4_E_MASK |
+ GRF_GPIO1B5_E_MASK |
+ GRF_GPIO1B6_E_MASK |
+ GRF_GPIO1B7_E_MASK,
+ GPIO_BIAS_12MA << GRF_GPIO1B0_E_SHIFT |
+ GPIO_BIAS_12MA << GRF_GPIO1B1_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO1B2_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO1B3_E_SHIFT |
+ GPIO_BIAS_12MA << GRF_GPIO1B4_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO1B5_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO1B6_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO1B7_E_SHIFT);
+
+ rk_clrsetreg(&grf->gpio1c_e,
+ GRF_GPIO1C0_E_MASK |
+ GRF_GPIO1C1_E_MASK |
+ GRF_GPIO1C3_E_MASK |
+ GRF_GPIO1C5_E_MASK |
+ GRF_GPIO1C6_E_MASK |
+ GRF_GPIO1C7_E_MASK,
+ GPIO_BIAS_12MA << GRF_GPIO1C0_E_SHIFT |
+ GPIO_BIAS_12MA << GRF_GPIO1C1_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO1C3_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO1C5_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO1C6_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO1C7_E_SHIFT);
+
+ rk_clrsetreg(&grf->gpio1d_e,
+ GRF_GPIO1D1_E_MASK,
+ GPIO_BIAS_12MA << GRF_GPIO1D1_E_SHIFT);
+ break;
+ default:
+ debug("gmac id = %d iomux error!\n", gmac_id);
+ break;
+ }
+}
+#endif
+
static int rk3328_pinctrl_request(struct udevice *dev, int func, int flags)
{
struct rk3328_pinctrl_priv *priv = dev_get_priv(dev);
@@ -349,6 +615,11 @@
case PERIPH_ID_SDMMC1:
pinctrl_rk3328_sdmmc_config(priv->grf, func);
break;
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+ case PERIPH_ID_GMAC:
+ pinctrl_rk3328_gmac_config(priv->grf, func);
+ break;
+#endif
default:
return -EINVAL;
}
@@ -383,6 +654,10 @@
return PERIPH_ID_SDCARD;
case 14:
return PERIPH_ID_EMMC;
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+ case 24:
+ return PERIPH_ID_GMAC;
+#endif
}
return -ENOENT;