mtd: resync with Linux-3.7.1
This patch is essentially an update of u-boot MTD subsystem to
the state of Linux-3.7.1 with exclusion of some bits:
- the update is concentrated on NAND, no onenand or CFI/NOR/SPI
flashes interfaces are updated EXCEPT for API changes.
- new large NAND chips support is there, though some updates
have got in Linux-3.8.-rc1, (which will follow on top of this patch).
To produce this update I used tag v3.7.1 of linux-stable repository.
The update was made using application of relevant patches,
with changes relevant to U-Boot-only stuff sticked together
to keep bisectability. Then all changes were grouped together
to this patch.
Signed-off-by: Sergey Lapin <slapin@ossfans.org>
[scottwood@freescale.com: some eccstrength and build fixes]
Signed-off-by: Scott Wood <scottwood@freescale.com>
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index fe8bdeb..d81972c 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -121,7 +121,7 @@
WATCHDOG_RESET();
if (!opts->scrub && bbtest) {
- int ret = meminfo->block_isbad(meminfo, erase.addr);
+ int ret = mtd_block_isbad(meminfo, erase.addr);
if (ret > 0) {
if (!opts->quiet)
printf("\rSkipping bad block at "
@@ -144,7 +144,7 @@
erased_length++;
- result = meminfo->erase(meminfo, &erase);
+ result = mtd_erase(meminfo, &erase);
if (result != 0) {
printf("\n%s: MTD Erase failure: %d\n",
mtd_device, result);
@@ -153,15 +153,16 @@
/* format for JFFS2 ? */
if (opts->jffs2 && chip->ecc.layout->oobavail >= 8) {
- chip->ops.ooblen = 8;
- chip->ops.datbuf = NULL;
- chip->ops.oobbuf = (uint8_t *)&cleanmarker;
- chip->ops.ooboffs = 0;
- chip->ops.mode = MTD_OOB_AUTO;
+ struct mtd_oob_ops ops;
+ ops.ooblen = 8;
+ ops.datbuf = NULL;
+ ops.oobbuf = (uint8_t *)&cleanmarker;
+ ops.ooboffs = 0;
+ ops.mode = MTD_OPS_AUTO_OOB;
- result = meminfo->write_oob(meminfo,
+ result = mtd_write_oob(meminfo,
erase.addr,
- &chip->ops);
+ &ops);
if (result != 0) {
printf("\n%s: MTD writeoob failure: %d\n",
mtd_device, result);
@@ -605,7 +606,7 @@
ops.len = pagesize;
ops.ooblen = nand->oobsize;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooboffs = 0;
pages = write_size / pagesize_oob;
@@ -615,7 +616,7 @@
ops.datbuf = p_buffer;
ops.oobbuf = ops.datbuf + pagesize;
- rval = nand->write_oob(nand, offset, &ops);
+ rval = mtd_write_oob(nand, offset, &ops);
if (rval != 0)
break;