This is the first commit for the u-boot zylonite port. The following has be
done so far:
* created zylonite board dir (based on lubbock)
* extended some - but not all pxa sources and headers for Intel
Monahans support (CONFIG_CPU_MONAHANS)
* created Makefile zylonite target + MAKEALL entry
* added some debug nonsense, remove later, grep for mk@tbd
Status: compiles (eldk-4.0), and can be started with BDI, but runs forever
and doesn't halt at breakpoints. Hmmm...
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index a8cc080..9940826 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -190,10 +190,10 @@
#endif
- /* RS: ??? */
- .macro CPWAIT
- mrc p15,0,r0,c2,c0,0
- mov r0,r0
+ /* takes care the CP15 update has taken place */
+ .macro CPWAIT reg
+ mrc p15,0,\reg,c2,c0,0
+ mov \reg,\reg
sub pc,pc,#4
.endm
@@ -201,13 +201,28 @@
cpu_init_crit:
/* mask all IRQs */
+#ifndef CONFIG_CPU_MONAHANS
+
ldr r0, IC_BASE
mov r1, #0x00
str r1, [r0, #ICMR]
+#else
+ /* Step 1 - Enable CP6 permission */
+ mrc p15, 0, r1, c15, c1, 0 @ read CPAR
+ orr r1, r1, #0x40
+ mcr p15, 0, r1, c15, c1, 0
+ CPWAIT r1
-#if defined(CFG_CPUSPEED)
+ /* Step 2 - Mask ICMR & ICMR2 */
+ mov r1, #0
+ mcr p6, 0, r1, c1, c0, 0 @ ICMR
+ mcr p6, 0, r1, c7, c0, 0 @ ICMR2
+#endif
- /* set clock speed */
+#ifndef CONFIG_CPU_MONAHANS
+#ifdef CFG_CPUSPEED
+
+ /* set clock speed tbd@mk: required for monahans? */
ldr r0, CC_BASE
ldr r1, cpuspeed
str r1, [r0, #CCCR]
@@ -215,7 +230,10 @@
mcr p14, 0, r0, c6, c0, 0
setspeed_done:
-#endif
+
+#endif /* CFG_CPUSPEED */
+#endif /* CONFIG_CPU_MONAHANS */
+
/*
* before relocating, we have to setup RAM timing
@@ -227,19 +245,21 @@
mov lr, ip
/* Memory interfaces are working. Disable MMU and enable I-cache. */
+ /* mk: hmm, this is not in the monahans docs, leave it now but
+ * check here if it doesn't work :-) */
ldr r0, =0x2001 /* enable access to all coproc. */
mcr p15, 0, r0, c15, c1, 0
- CPWAIT
+ CPWAIT r0
mcr p15, 0, r0, c7, c10, 4 /* drain the write & fill buffers */
- CPWAIT
+ CPWAIT r0
mcr p15, 0, r0, c7, c7, 0 /* flush Icache, Dcache and BTB */
- CPWAIT
+ CPWAIT r0
mcr p15, 0, r0, c8, c7, 0 /* flush instuction and data TLBs */
- CPWAIT
+ CPWAIT r0
/* Enable the Icache */
/*