mips: ath79: Add AR934x support
Add support for the Atheros AR934x WiSoCs. This patchs adds complete
system init, including PLL and DRAM init, both of which happen from
full C environment, since the AR934x has proper SRAM.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wills Wang <wills.wang@live.com>
diff --git a/arch/mips/dts/ar934x.dtsi b/arch/mips/dts/ar934x.dtsi
new file mode 100644
index 0000000..7a036a8
--- /dev/null
+++ b/arch/mips/dts/ar934x.dtsi
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "qca,ar934x";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips74Kc";
+ reg = <0>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ xtal: xtal {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "xtal";
+ };
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ehci0: ehci@1b000100 {
+ compatible = "generic-ehci";
+ reg = <0x1b000100 0x100>;
+
+ status = "disabled";
+ };
+
+ uart0: uart@18020000 {
+ compatible = "ns16550";
+ reg = <0x18020000 0x20>;
+ reg-shift = <2>;
+
+ status = "disabled";
+ };
+
+ gmac0: eth@0x19000000 {
+ compatible = "qca,ag934x-mac";
+ reg = <0x19000000 0x200>;
+ phy = <&phy0>;
+ phy-mode = "rgmii";
+
+ status = "disabled";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+ };
+
+ gmac1: eth@0x1a000000 {
+ compatible = "qca,ag934x-mac";
+ reg = <0x1a000000 0x200>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+
+ status = "disabled";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy1: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+ };
+ };
+
+ spi0: spi@1f000000 {
+ compatible = "qca,ar7100-spi";
+ reg = <0x1f000000 0x10>;
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
index f45403b..527960f 100644
--- a/arch/mips/mach-ath79/Kconfig
+++ b/arch/mips/mach-ath79/Kconfig
@@ -13,6 +13,15 @@
help
This supports QCA/Atheros ar933x family SOCs.
+config SOC_AR934X
+ bool
+ select SUPPORTS_BIG_ENDIAN
+ select SUPPORTS_CPU_MIPS32_R1
+ select SUPPORTS_CPU_MIPS32_R2
+ select MIPS_TUNE_74KC
+ help
+ This supports QCA/Atheros ar934x family SOCs.
+
config SOC_QCA953X
bool
select SUPPORTS_BIG_ENDIAN
diff --git a/arch/mips/mach-ath79/Makefile b/arch/mips/mach-ath79/Makefile
index 160dfaa..d7e2666 100644
--- a/arch/mips/mach-ath79/Makefile
+++ b/arch/mips/mach-ath79/Makefile
@@ -7,4 +7,5 @@
obj-y += dram.o
obj-$(CONFIG_SOC_AR933X) += ar933x/
-obj-$(CONFIG_SOC_QCA953X) += qca953x/
\ No newline at end of file
+obj-$(CONFIG_SOC_AR934X) += ar934x/
+obj-$(CONFIG_SOC_QCA953X) += qca953x/
diff --git a/arch/mips/mach-ath79/ar934x/Makefile b/arch/mips/mach-ath79/ar934x/Makefile
new file mode 100644
index 0000000..348c65b
--- /dev/null
+++ b/arch/mips/mach-ath79/ar934x/Makefile
@@ -0,0 +1,7 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += cpu.o
+obj-y += clk.o
+obj-y += ddr.o
diff --git a/arch/mips/mach-ath79/ar934x/clk.c b/arch/mips/mach-ath79/ar934x/clk.c
new file mode 100644
index 0000000..9c65184
--- /dev/null
+++ b/arch/mips/mach-ath79/ar934x/clk.c
@@ -0,0 +1,334 @@
+/*
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+#include <mach/ar71xx_regs.h>
+#include <mach/reset.h>
+#include <wait_bit.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * The math for calculating PLL:
+ * NFRAC * 2^8
+ * NINT + -------------
+ * XTAL [MHz] 2^(18 - 1)
+ * PLL [MHz] = ------------ * ----------------------
+ * REFDIV 2^OUTDIV
+ *
+ * Unfortunatelly, there is no way to reliably compute the variables.
+ * The vendor U-Boot port contains macros for various combinations of
+ * CPU PLL / DDR PLL / AHB bus speed and there is no obvious pattern
+ * in those numbers.
+ */
+struct ar934x_pll_config {
+ u8 range;
+ u8 refdiv;
+ u8 outdiv;
+ /* Index 0 is for XTAL=25MHz , Index 1 is for XTAL=40MHz */
+ u8 nint[2];
+};
+
+struct ar934x_clock_config {
+ u16 cpu_freq;
+ u16 ddr_freq;
+ u16 ahb_freq;
+
+ struct ar934x_pll_config cpu_pll;
+ struct ar934x_pll_config ddr_pll;
+};
+
+static const struct ar934x_clock_config ar934x_clock_config[] = {
+ { 300, 300, 150, { 1, 1, 1, { 24, 15 } }, { 1, 1, 1, { 24, 15 } } },
+ { 400, 200, 200, { 1, 1, 1, { 32, 20 } }, { 1, 1, 2, { 32, 20 } } },
+ { 400, 400, 200, { 0, 1, 1, { 32, 20 } }, { 0, 1, 1, { 32, 20 } } },
+ { 500, 400, 200, { 1, 1, 0, { 20, 12 } }, { 0, 1, 1, { 32, 20 } } },
+ { 533, 400, 200, { 1, 1, 0, { 21, 13 } }, { 0, 1, 1, { 32, 20 } } },
+ { 533, 500, 250, { 1, 1, 0, { 21, 13 } }, { 0, 1, 0, { 20, 12 } } },
+ { 560, 480, 240, { 1, 1, 0, { 22, 14 } }, { 1, 1, 0, { 19, 12 } } },
+ { 566, 400, 200, { 1, 1, 0, { 22, 14 } }, { 1, 1, 0, { 16, 10 } } },
+ { 566, 450, 225, { 1, 1, 0, { 22, 14 } }, { 0, 1, 1, { 36, 22 } } },
+ { 566, 475, 237, { 1, 1, 0, { 22, 14 } }, { 1, 1, 0, { 19, 11 } } },
+ { 566, 500, 250, { 1, 1, 0, { 22, 14 } }, { 1, 1, 0, { 20, 12 } } },
+ { 566, 525, 262, { 1, 1, 0, { 22, 14 } }, { 1, 1, 0, { 21, 13 } } },
+ { 566, 550, 275, { 1, 1, 0, { 22, 14 } }, { 1, 1, 0, { 22, 13 } } },
+ { 600, 266, 133, { 0, 1, 0, { 24, 15 } }, { 1, 1, 1, { 21, 16 } } },
+ { 600, 266, 200, { 0, 1, 0, { 24, 15 } }, { 1, 1, 1, { 21, 16 } } },
+ { 600, 300, 150, { 0, 1, 0, { 24, 15 } }, { 0, 1, 1, { 24, 15 } } },
+ { 600, 332, 166, { 0, 1, 0, { 24, 15 } }, { 1, 1, 1, { 26, 16 } } },
+ { 600, 332, 200, { 0, 1, 0, { 24, 15 } }, { 1, 1, 1, { 26, 16 } } },
+ { 600, 400, 200, { 0, 1, 0, { 24, 15 } }, { 0, 1, 1, { 32, 20 } } },
+ { 600, 450, 200, { 0, 1, 0, { 24, 15 } }, { 0, 1, 0, { 18, 20 } } },
+ { 600, 500, 250, { 0, 1, 0, { 24, 15 } }, { 1, 1, 0, { 20, 12 } } },
+ { 600, 525, 262, { 0, 1, 0, { 24, 15 } }, { 0, 1, 0, { 21, 20 } } },
+ { 600, 550, 275, { 0, 1, 0, { 24, 15 } }, { 0, 1, 0, { 22, 20 } } },
+ { 600, 575, 287, { 0, 1, 0, { 24, 15 } }, { 0, 1, 0, { 23, 14 } } },
+ { 600, 600, 300, { 0, 1, 0, { 24, 15 } }, { 0, 1, 0, { 24, 20 } } },
+ { 600, 650, 325, { 0, 1, 0, { 24, 15 } }, { 0, 1, 0, { 26, 20 } } },
+ { 650, 600, 300, { 0, 1, 0, { 26, 15 } }, { 0, 1, 0, { 24, 20 } } },
+ { 700, 400, 200, { 3, 1, 0, { 28, 17 } }, { 0, 1, 1, { 32, 20 } } },
+};
+
+static void ar934x_srif_pll_cfg(void __iomem *pll_reg_base, const u32 srif_val)
+{
+ u32 reg;
+ do {
+ writel(0x10810f00, pll_reg_base + 0x4);
+ writel(srif_val, pll_reg_base + 0x0);
+ writel(0xd0810f00, pll_reg_base + 0x4);
+ writel(0x03000000, pll_reg_base + 0x8);
+ writel(0xd0800f00, pll_reg_base + 0x4);
+
+ clrbits_be32(pll_reg_base + 0x8, BIT(30));
+ udelay(5);
+ setbits_be32(pll_reg_base + 0x8, BIT(30));
+ udelay(5);
+
+ wait_for_bit("clk", pll_reg_base + 0xc, BIT(3), 1, 10, 0);
+
+ clrbits_be32(pll_reg_base + 0x8, BIT(30));
+ udelay(5);
+
+ /* Check if CPU SRIF PLL locked. */
+ reg = readl(pll_reg_base + 0x8);
+ reg = (reg & 0x7ffff8) >> 3;
+ } while (reg >= 0x40000);
+}
+
+void ar934x_pll_init(const u16 cpu_mhz, const u16 ddr_mhz, const u16 ahb_mhz)
+{
+ void __iomem *srif_regs = map_physmem(AR934X_SRIF_BASE,
+ AR934X_SRIF_SIZE, MAP_NOCACHE);
+ void __iomem *pll_regs = map_physmem(AR71XX_PLL_BASE,
+ AR71XX_PLL_SIZE, MAP_NOCACHE);
+ const struct ar934x_pll_config *pll_cfg;
+ int i, pll_nint, pll_refdiv, xtal_40 = 0;
+ u32 reg, cpu_pll, cpu_srif, ddr_pll, ddr_srif;
+
+ /* Configure SRIF PLL with initial values. */
+ writel(0x13210f00, srif_regs + AR934X_SRIF_CPU_DPLL2_REG);
+ writel(0x03000000, srif_regs + AR934X_SRIF_CPU_DPLL3_REG);
+ writel(0x13210f00, srif_regs + AR934X_SRIF_DDR_DPLL2_REG);
+ writel(0x03000000, srif_regs + AR934X_SRIF_DDR_DPLL3_REG);
+ writel(0x03000000, srif_regs + 0x188); /* Undocumented reg :-) */
+
+ /* Test for 40MHz XTAL */
+ reg = get_bootstrap();
+ if (reg & AR934X_BOOTSTRAP_REF_CLK_40) {
+ xtal_40 = 1;
+ cpu_srif = 0x41c00000;
+ ddr_srif = 0x41680000;
+ } else {
+ xtal_40 = 0;
+ cpu_srif = 0x29c00000;
+ ddr_srif = 0x29680000;
+ }
+
+ /* Locate CPU/DDR PLL configuration */
+ for (i = 0; i < ARRAY_SIZE(ar934x_clock_config); i++) {
+ if (cpu_mhz != ar934x_clock_config[i].cpu_freq)
+ continue;
+ if (ddr_mhz != ar934x_clock_config[i].ddr_freq)
+ continue;
+ if (ahb_mhz != ar934x_clock_config[i].ahb_freq)
+ continue;
+
+ /* Entry found */
+ pll_cfg = &ar934x_clock_config[i].cpu_pll;
+ pll_nint = pll_cfg->nint[xtal_40];
+ pll_refdiv = pll_cfg->refdiv;
+ cpu_pll =
+ (pll_nint << AR934X_PLL_CPU_CONFIG_NINT_SHIFT) |
+ (pll_refdiv << AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) |
+ (pll_cfg->range << AR934X_PLL_CPU_CONFIG_RANGE_SHIFT) |
+ (pll_cfg->outdiv << AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT);
+
+ pll_cfg = &ar934x_clock_config[i].ddr_pll;
+ pll_nint = pll_cfg->nint[xtal_40];
+ pll_refdiv = pll_cfg->refdiv;
+ ddr_pll =
+ (pll_nint << AR934X_PLL_DDR_CONFIG_NINT_SHIFT) |
+ (pll_refdiv << AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) |
+ (pll_cfg->range << AR934X_PLL_DDR_CONFIG_RANGE_SHIFT) |
+ (pll_cfg->outdiv << AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT);
+ break;
+ }
+
+ /* PLL configuration not found, hang. */
+ if (i == ARRAY_SIZE(ar934x_clock_config))
+ hang();
+
+ /* Set PLL Bypass */
+ setbits_be32(pll_regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG,
+ AR934X_PLL_CLK_CTRL_CPU_PLL_BYPASS);
+ setbits_be32(pll_regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG,
+ AR934X_PLL_CLK_CTRL_DDR_PLL_BYPASS);
+ setbits_be32(pll_regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG,
+ AR934X_PLL_CLK_CTRL_AHB_PLL_BYPASS);
+
+ /* Configure CPU PLL */
+ writel(cpu_pll | AR934X_PLL_CPU_CONFIG_PLLPWD,
+ pll_regs + AR934X_PLL_CPU_CONFIG_REG);
+ /* Configure DDR PLL */
+ writel(ddr_pll | AR934X_PLL_DDR_CONFIG_PLLPWD,
+ pll_regs + AR934X_PLL_DDR_CONFIG_REG);
+ /* Configure PLL routing */
+ writel(AR934X_PLL_CLK_CTRL_CPU_PLL_BYPASS |
+ AR934X_PLL_CLK_CTRL_DDR_PLL_BYPASS |
+ AR934X_PLL_CLK_CTRL_AHB_PLL_BYPASS |
+ (0 << AR934X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) |
+ (0 << AR934X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) |
+ (1 << AR934X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) |
+ AR934X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL |
+ AR934X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL |
+ AR934X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL,
+ pll_regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
+
+ /* Configure SRIF PLLs, which is completely undocumented :-) */
+ ar934x_srif_pll_cfg(srif_regs + AR934X_SRIF_CPU_DPLL1_REG, cpu_srif);
+ ar934x_srif_pll_cfg(srif_regs + AR934X_SRIF_DDR_DPLL1_REG, ddr_srif);
+
+ /* Unset PLL Bypass */
+ clrbits_be32(pll_regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG,
+ AR934X_PLL_CLK_CTRL_CPU_PLL_BYPASS);
+ clrbits_be32(pll_regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG,
+ AR934X_PLL_CLK_CTRL_DDR_PLL_BYPASS);
+ clrbits_be32(pll_regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG,
+ AR934X_PLL_CLK_CTRL_AHB_PLL_BYPASS);
+
+ /* Enable PLL dithering */
+ writel((1 << AR934X_PLL_DDR_DIT_FRAC_STEP_SHIFT) |
+ (0xf << AR934X_PLL_DDR_DIT_UPD_CNT_SHIFT),
+ pll_regs + AR934X_PLL_DDR_DIT_FRAC_REG);
+ writel(48 << AR934X_PLL_CPU_DIT_UPD_CNT_SHIFT,
+ pll_regs + AR934X_PLL_CPU_DIT_FRAC_REG);
+}
+
+static u32 ar934x_get_xtal(void)
+{
+ u32 val;
+
+ val = get_bootstrap();
+ if (val & AR934X_BOOTSTRAP_REF_CLK_40)
+ return 40000000;
+ else
+ return 25000000;
+}
+
+int get_serial_clock(void)
+{
+ return ar934x_get_xtal();
+}
+
+static u32 ar934x_cpupll_to_hz(const u32 regval)
+{
+ const u32 outdiv = (regval >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
+ const u32 refdiv = (regval >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
+ const u32 nint = (regval >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_NINT_MASK;
+ const u32 nfrac = (regval >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
+ const u32 xtal = ar934x_get_xtal();
+
+ return (xtal * (nint + (nfrac >> 9))) / (refdiv * (1 << outdiv));
+}
+
+static u32 ar934x_ddrpll_to_hz(const u32 regval)
+{
+ const u32 outdiv = (regval >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
+ const u32 refdiv = (regval >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
+ const u32 nint = (regval >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_NINT_MASK;
+ const u32 nfrac = (regval >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
+ const u32 xtal = ar934x_get_xtal();
+
+ return (xtal * (nint + (nfrac >> 9))) / (refdiv * (1 << outdiv));
+}
+
+static void ar934x_update_clock(void)
+{
+ void __iomem *regs;
+ u32 ctrl, cpu, cpupll, ddr, ddrpll;
+ u32 cpudiv, ddrdiv, busdiv;
+ u32 cpuclk, ddrclk, busclk;
+
+ regs = map_physmem(AR71XX_PLL_BASE, AR71XX_PLL_SIZE,
+ MAP_NOCACHE);
+
+ cpu = readl(regs + AR934X_PLL_CPU_CONFIG_REG);
+ ddr = readl(regs + AR934X_PLL_DDR_CONFIG_REG);
+ ctrl = readl(regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
+
+ cpupll = ar934x_cpupll_to_hz(cpu);
+ ddrpll = ar934x_ddrpll_to_hz(ddr);
+
+ if (ctrl & AR934X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
+ cpuclk = ar934x_get_xtal();
+ else if (ctrl & AR934X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
+ cpuclk = cpupll;
+ else
+ cpuclk = ddrpll;
+
+ if (ctrl & AR934X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
+ ddrclk = ar934x_get_xtal();
+ else if (ctrl & AR934X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
+ ddrclk = ddrpll;
+ else
+ ddrclk = cpupll;
+
+ if (ctrl & AR934X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
+ busclk = ar934x_get_xtal();
+ else if (ctrl & AR934X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
+ busclk = ddrpll;
+ else
+ busclk = cpupll;
+
+ cpudiv = (ctrl >> AR934X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
+ AR934X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
+ ddrdiv = (ctrl >> AR934X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
+ AR934X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
+ busdiv = (ctrl >> AR934X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
+ AR934X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
+
+ gd->cpu_clk = cpuclk / (cpudiv + 1);
+ gd->mem_clk = ddrclk / (ddrdiv + 1);
+ gd->bus_clk = busclk / (busdiv + 1);
+}
+
+ulong get_bus_freq(ulong dummy)
+{
+ ar934x_update_clock();
+ return gd->bus_clk;
+}
+
+ulong get_ddr_freq(ulong dummy)
+{
+ ar934x_update_clock();
+ return gd->mem_clk;
+}
+
+int do_ar934x_showclk(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ ar934x_update_clock();
+ printf("CPU: %8ld MHz\n", gd->cpu_clk / 1000000);
+ printf("Memory: %8ld MHz\n", gd->mem_clk / 1000000);
+ printf("AHB: %8ld MHz\n", gd->bus_clk / 1000000);
+ return 0;
+}
+
+U_BOOT_CMD(
+ clocks, CONFIG_SYS_MAXARGS, 1, do_ar934x_showclk,
+ "display clocks",
+ ""
+);
diff --git a/arch/mips/mach-ath79/ar934x/cpu.c b/arch/mips/mach-ath79/ar934x/cpu.c
new file mode 100644
index 0000000..8fcdf65
--- /dev/null
+++ b/arch/mips/mach-ath79/ar934x/cpu.c
@@ -0,0 +1,10 @@
+/*
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+/* The lowlevel_init() is not needed on AR934x */
+void lowlevel_init(void) {}
diff --git a/arch/mips/mach-ath79/ar934x/ddr.c b/arch/mips/mach-ath79/ar934x/ddr.c
new file mode 100644
index 0000000..4621d58
--- /dev/null
+++ b/arch/mips/mach-ath79/ar934x/ddr.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * Based on RAM init sequence by Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+#include <mach/ar71xx_regs.h>
+#include <mach/reset.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+ AR934X_SDRAM = 0,
+ AR934X_DDR1,
+ AR934X_DDR2,
+};
+
+struct ar934x_mem_config {
+ u32 config1;
+ u32 config2;
+ u32 mode;
+ u32 extmode;
+ u32 tap;
+};
+
+static const struct ar934x_mem_config ar934x_mem_config[] = {
+ [AR934X_SDRAM] = { 0x7fbe8cd0, 0x959f66a8, 0x33, 0, 0x1f1f },
+ [AR934X_DDR1] = { 0x7fd48cd0, 0x99d0e6a8, 0x33, 0, 0x14 },
+ [AR934X_DDR2] = { 0xc7d48cd0, 0x9dd0e6a8, 0x33, 0, 0x10012 },
+};
+
+void ar934x_ddr_init(const u16 cpu_mhz, const u16 ddr_mhz, const u16 ahb_mhz)
+{
+ void __iomem *ddr_regs;
+ const struct ar934x_mem_config *memcfg;
+ int memtype;
+ u32 reg, cycle, ctl;
+
+ ddr_regs = map_physmem(AR71XX_DDR_CTRL_BASE, AR71XX_DDR_CTRL_SIZE,
+ MAP_NOCACHE);
+
+ reg = get_bootstrap();
+ if (reg & AR934X_BOOTSTRAP_SDRAM_DISABLED) { /* DDR */
+ if (reg & AR934X_BOOTSTRAP_DDR1) { /* DDR 1 */
+ memtype = AR934X_DDR1;
+ cycle = 0xffff;
+ } else { /* DDR 2 */
+ memtype = AR934X_DDR2;
+ if (gd->arch.rev) {
+ ctl = BIT(6); /* Undocumented bit :-( */
+ if (reg & BIT(3))
+ cycle = 0xff;
+ else
+ cycle = 0xffff;
+ } else {
+ /* Force DDR2/x16 configuratio on old chips. */
+ ctl = 0;
+ cycle = 0xffff; /* DDR2 16bit */
+ }
+
+ writel(0xe59, ddr_regs + AR934X_DDR_REG_DDR2_CONFIG);
+ udelay(100);
+
+ writel(0x10, ddr_regs + AR71XX_DDR_REG_CONTROL);
+ udelay(10);
+
+ writel(0x20, ddr_regs + AR71XX_DDR_REG_CONTROL);
+ udelay(10);
+
+ writel(ctl, ddr_regs + AR934X_DDR_REG_CTL_CONF);
+ udelay(10);
+ }
+ } else { /* SDRAM */
+ memtype = AR934X_SDRAM;
+ cycle = 0xffffffff;
+
+ writel(0x13b, ddr_regs + AR934X_DDR_REG_CTL_CONF);
+ udelay(100);
+
+ /* Undocumented register */
+ writel(0x13b, ddr_regs + 0x118);
+ udelay(100);
+ }
+
+ memcfg = &ar934x_mem_config[memtype];
+
+ writel(memcfg->config1, ddr_regs + AR71XX_DDR_REG_CONFIG);
+ udelay(100);
+
+ writel(memcfg->config2, ddr_regs + AR71XX_DDR_REG_CONFIG2);
+ udelay(100);
+
+ writel(0x8, ddr_regs + AR71XX_DDR_REG_CONTROL);
+ udelay(10);
+
+ writel(memcfg->mode | 0x100, ddr_regs + AR71XX_DDR_REG_MODE);
+ mdelay(1);
+
+ writel(0x1, ddr_regs + AR71XX_DDR_REG_CONTROL);
+ udelay(10);
+
+ if (memtype == AR934X_DDR2) {
+ writel(memcfg->mode | 0x100, ddr_regs + AR71XX_DDR_REG_EMR);
+ udelay(100);
+
+ writel(0x2, ddr_regs + AR71XX_DDR_REG_CONTROL);
+ udelay(10);
+ }
+
+ if (memtype != AR934X_SDRAM)
+ writel(0x402, ddr_regs + AR71XX_DDR_REG_EMR);
+
+ udelay(100);
+
+ writel(0x2, ddr_regs + AR71XX_DDR_REG_CONTROL);
+ udelay(10);
+
+ writel(0x8, ddr_regs + AR71XX_DDR_REG_CONTROL);
+ udelay(10);
+
+ writel(memcfg->mode, ddr_regs + AR71XX_DDR_REG_MODE);
+ udelay(100);
+
+ writel(0x1, ddr_regs + AR71XX_DDR_REG_CONTROL);
+ udelay(10);
+
+ writel(0x412c /* FIXME */, ddr_regs + AR71XX_DDR_REG_REFRESH);
+ udelay(100);
+
+ writel(memcfg->tap, ddr_regs + AR71XX_DDR_REG_TAP_CTRL0);
+ writel(memcfg->tap, ddr_regs + AR71XX_DDR_REG_TAP_CTRL1);
+
+ if (memtype != AR934X_SDRAM) {
+ if ((gd->arch.rev && (reg & BIT(3))) || !gd->arch.rev) {
+ writel(memcfg->tap,
+ ddr_regs + AR934X_DDR_REG_TAP_CTRL2);
+ writel(memcfg->tap,
+ ddr_regs + AR934X_DDR_REG_TAP_CTRL3);
+ }
+ }
+
+ writel(cycle, ddr_regs + AR71XX_DDR_REG_RD_CYCLE);
+ udelay(100);
+
+ writel(0x74444444, ddr_regs + AR934X_DDR_REG_BURST);
+ udelay(100);
+
+ writel(0x222, ddr_regs + AR934X_DDR_REG_BURST2);
+ udelay(100);
+
+ writel(0xfffff, ddr_regs + AR934X_DDR_REG_TIMEOUT_MAX);
+ udelay(100);
+}
+
+void ddr_tap_tuning(void)
+{
+}
diff --git a/arch/mips/mach-ath79/include/mach/ar71xx_regs.h b/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
index a9630c0..a8e51cb 100644
--- a/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
+++ b/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
@@ -250,11 +250,22 @@
#define AR933X_DDR_REG_TIMEOUT_CNT 0x9c
#define AR933X_DDR_REG_TIMEOUT_ADDR 0x9c
+#define AR934X_DDR_REG_TAP_CTRL2 0x24
+#define AR934X_DDR_REG_TAP_CTRL3 0x28
#define AR934X_DDR_REG_FLUSH_GE0 0x9c
#define AR934X_DDR_REG_FLUSH_GE1 0xa0
#define AR934X_DDR_REG_FLUSH_USB 0xa4
#define AR934X_DDR_REG_FLUSH_PCIE 0xa8
#define AR934X_DDR_REG_FLUSH_WMAC 0xac
+#define AR934X_DDR_REG_FLUSH_SRC1 0xb0
+#define AR934X_DDR_REG_FLUSH_SRC2 0xb4
+#define AR934X_DDR_REG_DDR2_CONFIG 0xb8
+#define AR934X_DDR_REG_EMR2 0xbc
+#define AR934X_DDR_REG_EMR3 0xc0
+#define AR934X_DDR_REG_BURST 0xc4
+#define AR934X_DDR_REG_BURST2 0xc8
+#define AR934X_DDR_REG_TIMEOUT_MAX 0xcc
+#define AR934X_DDR_REG_CTL_CONF 0x108
#define QCA953X_DDR_REG_FLUSH_GE0 0x9c
#define QCA953X_DDR_REG_FLUSH_GE1 0xa0
@@ -341,6 +352,8 @@
#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24
#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c
+#define AR934X_PLL_DDR_DIT_FRAC_REG 0x44
+#define AR934X_PLL_CPU_DIT_FRAC_REG 0x48
#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
@@ -348,8 +361,12 @@
#define AR934X_PLL_CPU_CONFIG_NINT_MASK 0x3f
#define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
#define AR934X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
+#define AR934X_PLL_CPU_CONFIG_RANGE_SHIFT 17
+#define AR934X_PLL_CPU_CONFIG_RANGE_MASK 0x3
#define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
#define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3
+#define AR934X_PLL_CPU_CONFIG_PLLPWD BIT(30)
+#define AR934X_PLL_CPU_CONFIG_UPDATING BIT(31)
#define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
#define AR934X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
@@ -357,8 +374,12 @@
#define AR934X_PLL_DDR_CONFIG_NINT_MASK 0x3f
#define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
#define AR934X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
+#define AR934X_PLL_DDR_CONFIG_RANGE_SHIFT 21
+#define AR934X_PLL_DDR_CONFIG_RANGE_MASK 0x3
#define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
#define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
+#define AR934X_PLL_DDR_CONFIG_PLLPWD BIT(30)
+#define AR934X_PLL_DDR_CONFIG_UPDATING BIT(31)
#define AR934X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
#define AR934X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
@@ -375,6 +396,26 @@
#define AR934X_PLL_SWITCH_CLK_CTRL_MDIO_CLK_SEL BIT(6)
+#define AR934X_PLL_DDR_DIT_FRAC_MAX_SHIFT 0
+#define AR934X_PLL_DDR_DIT_FRAC_MAX_MASK 0x3ff
+#define AR934X_PLL_DDR_DIT_FRAC_MIN_SHIFT 10
+#define AR934X_PLL_DDR_DIT_FRAC_MIN_MASK 0x3ff
+#define AR934X_PLL_DDR_DIT_FRAC_STEP_SHIFT 20
+#define AR934X_PLL_DDR_DIT_FRAC_STEP_MASK 0x3f
+#define AR934X_PLL_DDR_DIT_UPD_CNT_SHIFT 27
+#define AR934X_PLL_DDR_DIT_UPD_CNT_MASK 0x3f
+#define AR934X_PLL_DDR_DIT_DITHER_EN BIT(31)
+
+#define AR934X_PLL_CPU_DIT_FRAC_MAX_SHIFT 0
+#define AR934X_PLL_CPU_DIT_FRAC_MAX_MASK 0x3f
+#define AR934X_PLL_CPU_DIT_FRAC_MIN_SHIFT 6
+#define AR934X_PLL_CPU_DIT_FRAC_MIN_MASK 0x3f
+#define AR934X_PLL_CPU_DIT_FRAC_STEP_SHIFT 12
+#define AR934X_PLL_CPU_DIT_FRAC_STEP_MASK 0x3f
+#define AR934X_PLL_CPU_DIT_UPD_CNT_SHIFT 18
+#define AR934X_PLL_CPU_DIT_UPD_CNT_MASK 0x3f
+#define AR934X_PLL_CPU_DIT_DITHER_EN BIT(31)
+
#define QCA953X_PLL_CPU_CONFIG_REG 0x00
#define QCA953X_PLL_DDR_CONFIG_REG 0x04
#define QCA953X_PLL_CLK_CTRL_REG 0x08
@@ -1081,10 +1122,12 @@
#define AR934X_SRIF_CPU_DPLL1_REG 0x1c0
#define AR934X_SRIF_CPU_DPLL2_REG 0x1c4
#define AR934X_SRIF_CPU_DPLL3_REG 0x1c8
+#define AR934X_SRIF_CPU_DPLL4_REG 0x1cc
#define AR934X_SRIF_DDR_DPLL1_REG 0x240
#define AR934X_SRIF_DDR_DPLL2_REG 0x244
#define AR934X_SRIF_DDR_DPLL3_REG 0x248
+#define AR934X_SRIF_DDR_DPLL4_REG 0x24c
#define AR934X_SRIF_DPLL1_REFDIV_SHIFT 27
#define AR934X_SRIF_DPLL1_REFDIV_MASK 0x1f
diff --git a/arch/mips/mach-ath79/include/mach/ath79.h b/arch/mips/mach-ath79/include/mach/ath79.h
index 2c6c118..17af082 100644
--- a/arch/mips/mach-ath79/include/mach/ath79.h
+++ b/arch/mips/mach-ath79/include/mach/ath79.h
@@ -143,4 +143,7 @@
int ath79_eth_reset(void);
int ath79_usb_reset(void);
+void ar934x_pll_init(const u16 cpu_mhz, const u16 ddr_mhz, const u16 ahb_mhz);
+void ar934x_ddr_init(const u16 cpu_mhz, const u16 ddr_mhz, const u16 ahb_mhz);
+
#endif /* __ASM_MACH_ATH79_H */