ARM: dts: stm32: Use lower-case hex for address for stm32f469-disco-u-boot.dtsi
Replace upper-case hex with lower-case hex for address.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
diff --git a/arch/arm/dts/stm32f469-disco-u-boot.dtsi b/arch/arm/dts/stm32f469-disco-u-boot.dtsi
index 9eda8f5..cd17362 100644
--- a/arch/arm/dts/stm32f469-disco-u-boot.dtsi
+++ b/arch/arm/dts/stm32f469-disco-u-boot.dtsi
@@ -34,7 +34,7 @@
fmc: fmc@A0000000 {
compatible = "st,stm32-fmc";
- reg = <0xA0000000 0x1000>;
+ reg = <0xa0000000 0x1000>;
clocks = <&rcc 0 STM32F4_AHB3_CLOCK(FMC)>;
st,syscfg = <&syscfg>;
pinctrl-0 = <&fmc_pins_d32>;
@@ -70,7 +70,7 @@
compatible = "st,stm32f469-qspi";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>;
+ reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>;
reg-names = "qspi", "qspi_mm";
interrupts = <91>;
spi-max-frequency = <108000000>;
@@ -236,7 +236,7 @@
};
&qspi {
- reg = <0xA0001000 0x1000>, <0x90000000 0x1000000>;
+ reg = <0xa0001000 0x1000>, <0x90000000 0x1000000>;
flash0: n25q128a@0 {
#address-cells = <1>;
#size-cells = <1>;