mmc: mtk-sd: Fix not calling dev_err with a device
This adds a udevice parameter to get_best_delay and msdc_set_mclk so they
can call dev_err properly.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c
index bd1fb09..30fe7a0 100644
--- a/drivers/mmc/mtk-sd.c
+++ b/drivers/mmc/mtk-sd.c
@@ -774,7 +774,8 @@
writel(val, &host->base->sdc_cfg);
}
-static void msdc_set_mclk(struct msdc_host *host, enum bus_mode timing, u32 hz)
+static void msdc_set_mclk(struct udevice *dev,
+ struct msdc_host *host, enum bus_mode timing, u32 hz)
{
u32 mode;
u32 div;
@@ -897,7 +898,7 @@
clock = mmc->cfg->f_min;
if (host->mclk != clock || host->timing != mmc->selected_mode)
- msdc_set_mclk(host, mmc->selected_mode, clock);
+ msdc_set_mclk(dev, host, mmc->selected_mode, clock);
return 0;
}
@@ -957,7 +958,8 @@
return PAD_DELAY_MAX - start_bit;
}
-static struct msdc_delay_phase get_best_delay(struct msdc_host *host, u32 delay)
+static struct msdc_delay_phase get_best_delay(struct udevice *dev,
+ struct msdc_host *host, u32 delay)
{
int start = 0, len = 0;
int start_final = 0, len_final = 0;
@@ -1067,7 +1069,7 @@
}
}
- final_cmd_delay = get_best_delay(host, cmd_delay);
+ final_cmd_delay = get_best_delay(dev, host, cmd_delay);
clrsetbits_le32(tune_reg, PAD_CMD_TUNE_RX_DLY3,
final_cmd_delay.final_phase <<
PAD_CMD_TUNE_RX_DLY3_S);
@@ -1117,7 +1119,7 @@
}
}
- final_rise_delay = get_best_delay(host, rise_delay);
+ final_rise_delay = get_best_delay(dev, host, rise_delay);
/* if rising edge has enough margin, do not scan falling edge */
if (final_rise_delay.maxlen >= 12 ||
(final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
@@ -1139,7 +1141,7 @@
}
}
- final_fall_delay = get_best_delay(host, fall_delay);
+ final_fall_delay = get_best_delay(dev, host, fall_delay);
skip_fall:
final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
@@ -1171,7 +1173,7 @@
dev_err(dev, "Final internal delay: 0x%x\n", internal_delay);
- internal_delay_phase = get_best_delay(host, internal_delay);
+ internal_delay_phase = get_best_delay(dev, host, internal_delay);
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRRDLY_M,
internal_delay_phase.final_phase <<
MSDC_PAD_TUNE_CMDRRDLY_S);
@@ -1214,7 +1216,7 @@
}
}
- final_rise_delay = get_best_delay(host, rise_delay);
+ final_rise_delay = get_best_delay(dev, host, rise_delay);
if (final_rise_delay.maxlen >= 12 ||
(final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
goto skip_fall;
@@ -1237,7 +1239,7 @@
}
}
- final_fall_delay = get_best_delay(host, fall_delay);
+ final_fall_delay = get_best_delay(dev, host, fall_delay);
skip_fall:
final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
@@ -1293,7 +1295,7 @@
rise_delay |= (1 << i);
}
- final_rise_delay = get_best_delay(host, rise_delay);
+ final_rise_delay = get_best_delay(dev, host, rise_delay);
if (final_rise_delay.maxlen >= 12 ||
(final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
goto skip_fall;
@@ -1309,7 +1311,7 @@
fall_delay |= (1 << i);
}
- final_fall_delay = get_best_delay(host, fall_delay);
+ final_fall_delay = get_best_delay(dev, host, fall_delay);
skip_fall:
final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);