arm: mach-k3: Move hardware handling to common files
These hardware register definitions are common for all K3, remove
duplicate data them by moving them to hardware.h.
While here do some minor whitespace cleanup + grouping.
Signed-off-by: Andrew Davis <afd@ti.com>
diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c
index 8428322..0e30cc4 100644
--- a/arch/arm/mach-k3/am642_init.c
+++ b/arch/arm/mach-k3/am642_init.c
@@ -23,7 +23,6 @@
#include <mmc.h>
#include <dm/root.h>
-#define MCU_CTRL_MMR0_BASE 0x04500000
#define CTRLMMR_MCU_RST_CTRL 0x04518170
static void ctrl_mmr_unlock(void)
diff --git a/arch/arm/mach-k3/include/mach/am62_hardware.h b/arch/arm/mach-k3/include/mach/am62_hardware.h
index 9118d05..278beb5 100644
--- a/arch/arm/mach-k3/include/mach/am62_hardware.h
+++ b/arch/arm/mach-k3/include/mach/am62_hardware.h
@@ -44,23 +44,6 @@
/* Backup Bootmode USB Config macros */
#define MAIN_DEVSTAT_BACKUP_USB_MODE_MASK 0x01
-/*
- * The CTRL_MMR0 memory space is divided into several equally-spaced
- * partitions, so defining the partition size allows us to determine
- * register addresses common to those partitions.
- */
-#define CTRL_MMR0_PARTITION_SIZE 0x4000
-
-/*
- * CTRL_MMR0, WKUP_CTRL_MMR0, and MCU_CTRL_MMR0 lock/kick-mechanism
- * shared register definitions. The same registers are also used for
- * PADCFG_MMR lock/kick-mechanism.
- */
-#define CTRLMMR_LOCK_KICK0 0x1008
-#define CTRLMMR_LOCK_KICK0_UNLOCK_VAL 0x68ef3490
-#define CTRLMMR_LOCK_KICK1 0x100c
-#define CTRLMMR_LOCK_KICK1_UNLOCK_VAL 0xd172bc5a
-
#define MCU_CTRL_LFXOSC_CTRL (MCU_CTRL_MMR0_BASE + 0x8038)
#define MCU_CTRL_LFXOSC_TRIM (MCU_CTRL_MMR0_BASE + 0x803c)
#define MCU_CTRL_LFXOSC_32K_DISABLE_VAL BIT(7)
diff --git a/arch/arm/mach-k3/include/mach/am64_hardware.h b/arch/arm/mach-k3/include/mach/am64_hardware.h
index e06e1f9..6c9332e 100644
--- a/arch/arm/mach-k3/include/mach/am64_hardware.h
+++ b/arch/arm/mach-k3/include/mach/am64_hardware.h
@@ -7,12 +7,13 @@
#ifndef __ASM_ARCH_AM64_HARDWARE_H
#define __ASM_ARCH_AM64_HARDWARE_H
-#define CTRL_MMR0_BASE 0x43000000
-#define CTRLMMR_MAIN_DEVSTAT (CTRL_MMR0_BASE + 0x30)
-
-#define PADCFG_MMR1_BASE 0xf0000
-
+#define PADCFG_MMR1_BASE 0x000f0000
#define MCU_PADCFG_MMR1_BASE 0x04080000
+#define WKUP_CTRL_MMR0_BASE 0x43000000
+#define MCU_CTRL_MMR0_BASE 0x04500000
+#define CTRL_MMR0_BASE 0x43000000
+
+#define CTRLMMR_MAIN_DEVSTAT (CTRL_MMR0_BASE + 0x30)
#define MAIN_DEVSTAT_PRIMARY_BOOTMODE_MASK 0x00000078
#define MAIN_DEVSTAT_PRIMARY_BOOTMODE_SHIFT 3
@@ -35,23 +36,6 @@
#define MAIN_DEVSTAT_BACKUP_USB_MODE_MASK 0x01
-/*
- * The CTRL_MMR and PADCFG_MMR memory space is divided into several
- * equally-spaced partitions, so defining the partition size allows us to
- * determine register addresses common to those partitions.
- */
-#define CTRL_MMR0_PARTITION_SIZE 0x4000
-
-/*
- * CTRL_MMR and PADCFG_MMR lock/kick-mechanism shared register definitions.
- */
-#define CTRLMMR_LOCK_KICK0 0x01008
-#define CTRLMMR_LOCK_KICK0_UNLOCK_VAL 0x68ef3490
-#define CTRLMMR_LOCK_KICK0_UNLOCKED_MASK BIT(0)
-#define CTRLMMR_LOCK_KICK0_UNLOCKED_SHIFT 0
-#define CTRLMMR_LOCK_KICK1 0x0100c
-#define CTRLMMR_LOCK_KICK1_UNLOCK_VAL 0xd172bc5a
-
#define ROM_ENTENDED_BOOT_DATA_INFO 0x701beb00
/* Use Last 2K as Scratch pad */
diff --git a/arch/arm/mach-k3/include/mach/am6_hardware.h b/arch/arm/mach-k3/include/mach/am6_hardware.h
index f533e22..f9f3291 100644
--- a/arch/arm/mach-k3/include/mach/am6_hardware.h
+++ b/arch/arm/mach-k3/include/mach/am6_hardware.h
@@ -13,8 +13,10 @@
#endif
#define CTRL_MMR0_BASE 0x00100000
-#define CTRLMMR_MAIN_DEVSTAT (CTRL_MMR0_BASE + 0x30)
+#define WKUP_CTRL_MMR0_BASE 0x43000000
+#define MCU_CTRL_MMR0_BASE 0x40f00000
+#define CTRLMMR_MAIN_DEVSTAT (CTRL_MMR0_BASE + 0x30)
#define CTRLMMR_MAIN_DEVSTAT_BOOTMODE_MASK GENMASK(3, 0)
#define CTRLMMR_MAIN_DEVSTAT_BOOTMODE_SHIFT 0
#define CTRLMMR_MAIN_DEVSTAT_BKUP_BOOTMODE_MASK GENMASK(6, 4)
@@ -28,27 +30,6 @@
#define CTRLMMR_MAIN_DEVSTAT_USB_MODE_SHIFT 9
#define CTRLMMR_MAIN_DEVSTAT_USB_MODE_MASK GENMASK(10, 9)
-#define WKUP_CTRL_MMR0_BASE 0x43000000
-#define MCU_CTRL_MMR0_BASE 0x40f00000
-
-/*
- * The CTRL_MMR0 memory space is divided into several equally-spaced
- * partitions, so defining the partition size allows us to determine
- * register addresses common to those partitions.
- */
-#define CTRL_MMR0_PARTITION_SIZE 0x4000
-
-/*
- * CTRL_MMR0, WKUP_CTRL_MMR0, and MCU_CTR_MMR0 lock/kick-mechanism
- * shared register definitions.
- */
-#define CTRLMMR_LOCK_KICK0 0x01008
-#define CTRLMMR_LOCK_KICK0_UNLOCK_VAL 0x68ef3490
-#define CTRLMMR_LOCK_KICK0_UNLOCKED_MASK BIT(0)
-#define CTRLMMR_LOCK_KICK0_UNLOCKED_SHIFT 0
-#define CTRLMMR_LOCK_KICK1 0x0100c
-#define CTRLMMR_LOCK_KICK1_UNLOCK_VAL 0xd172bc5a
-
/* MCU SCRATCHPAD usage */
#define TI_SRAM_SCRATCH_BOARD_EEPROM_START CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE
diff --git a/arch/arm/mach-k3/include/mach/hardware.h b/arch/arm/mach-k3/include/mach/hardware.h
index 028482b..d6d2cf6 100644
--- a/arch/arm/mach-k3/include/mach/hardware.h
+++ b/arch/arm/mach-k3/include/mach/hardware.h
@@ -27,7 +27,7 @@
#endif
/* Assuming these addresses and definitions stay common across K3 devices */
-#define CTRLMMR_WKUP_JTAG_ID 0x43000014
+#define CTRLMMR_WKUP_JTAG_ID (WKUP_CTRL_MMR0_BASE + 0x14)
#define JTAG_ID_VARIANT_SHIFT 28
#define JTAG_ID_VARIANT_MASK (0xf << 28)
#define JTAG_ID_PARTNO_SHIFT 12
@@ -43,6 +43,23 @@
#define SYS_STATUS_SUB_TYPE_MASK (0xf << 8)
#define SYS_STATUS_SUB_TYPE_VAL_FS 0xa
+/*
+ * The CTRL_MMR0 memory space is divided into several equally-spaced
+ * partitions, so defining the partition size allows us to determine
+ * register addresses common to those partitions.
+ */
+#define CTRL_MMR0_PARTITION_SIZE 0x4000
+
+/*
+ * CTRL_MMR0, WKUP_CTRL_MMR0, and MCU_CTRL_MMR0 lock/kick-mechanism
+ * shared register definitions. The same registers are also used for
+ * PADCFG_MMR lock/kick-mechanism.
+ */
+#define CTRLMMR_LOCK_KICK0 0x1008
+#define CTRLMMR_LOCK_KICK0_UNLOCK_VAL 0x68ef3490
+#define CTRLMMR_LOCK_KICK1 0x100c
+#define CTRLMMR_LOCK_KICK1_UNLOCK_VAL 0xd172bc5a
+
#define K3_ROM_BOOT_HEADER_MAGIC "EXTBOOT"
struct rom_extended_boot_data {
diff --git a/arch/arm/mach-k3/include/mach/j721e_hardware.h b/arch/arm/mach-k3/include/mach/j721e_hardware.h
index b98f0a8..032cb26 100644
--- a/arch/arm/mach-k3/include/mach/j721e_hardware.h
+++ b/arch/arm/mach-k3/include/mach/j721e_hardware.h
@@ -12,9 +12,11 @@
#include <linux/bitops.h>
#endif
+#define WKUP_CTRL_MMR0_BASE 0x43000000
+#define MCU_CTRL_MMR0_BASE 0x40f00000
#define CTRL_MMR0_BASE 0x00100000
-#define CTRLMMR_MAIN_DEVSTAT (CTRL_MMR0_BASE + 0x30)
+#define CTRLMMR_MAIN_DEVSTAT (CTRL_MMR0_BASE + 0x30)
#define MAIN_DEVSTAT_BOOT_MODE_B_MASK BIT(0)
#define MAIN_DEVSTAT_BOOT_MODE_B_SHIFT 0
#define MAIN_DEVSTAT_BKUP_BOOTMODE_MASK GENMASK(3, 1)
@@ -24,33 +26,12 @@
#define MAIN_DEVSTAT_BKUP_MMC_PORT_MASK BIT(7)
#define MAIN_DEVSTAT_BKUP_MMC_PORT_SHIFT 7
-#define WKUP_CTRL_MMR0_BASE 0x43000000
-#define MCU_CTRL_MMR0_BASE 0x40f00000
-
#define CTRLMMR_WKUP_DEVSTAT (WKUP_CTRL_MMR0_BASE + 0x30)
#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK GENMASK(5, 3)
#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT 3
#define WKUP_DEVSTAT_MCU_OMLY_MASK BIT(6)
#define WKUP_DEVSTAT_MCU_ONLY_SHIFT 6
-/*
- * The CTRL_MMR0 memory space is divided into several equally-spaced
- * partitions, so defining the partition size allows us to determine
- * register addresses common to those partitions.
- */
-#define CTRL_MMR0_PARTITION_SIZE 0x4000
-
-/*
- * CTRL_MMR0, WKUP_CTRL_MMR0, and MCU_CTR_MMR0 lock/kick-mechanism
- * shared register definitions.
- */
-#define CTRLMMR_LOCK_KICK0 0x01008
-#define CTRLMMR_LOCK_KICK0_UNLOCK_VAL 0x68ef3490
-#define CTRLMMR_LOCK_KICK0_UNLOCKED_MASK BIT(0)
-#define CTRLMMR_LOCK_KICK0_UNLOCKED_SHIFT 0
-#define CTRLMMR_LOCK_KICK1 0x0100c
-#define CTRLMMR_LOCK_KICK1_UNLOCK_VAL 0xd172bc5a
-
/* ROM HANDOFF Structure location */
#define ROM_ENTENDED_BOOT_DATA_INFO 0x41cffb00
diff --git a/arch/arm/mach-k3/include/mach/j721s2_hardware.h b/arch/arm/mach-k3/include/mach/j721s2_hardware.h
index 23dfe2e..e47f40e 100644
--- a/arch/arm/mach-k3/include/mach/j721s2_hardware.h
+++ b/arch/arm/mach-k3/include/mach/j721s2_hardware.h
@@ -12,9 +12,11 @@
#include <linux/bitops.h>
#endif
+#define WKUP_CTRL_MMR0_BASE 0x43000000
+#define MCU_CTRL_MMR0_BASE 0x40f00000
#define CTRL_MMR0_BASE 0x00100000
-#define CTRLMMR_MAIN_DEVSTAT (CTRL_MMR0_BASE + 0x30)
+#define CTRLMMR_MAIN_DEVSTAT (CTRL_MMR0_BASE + 0x30)
#define MAIN_DEVSTAT_BOOT_MODE_B_MASK BIT(0)
#define MAIN_DEVSTAT_BOOT_MODE_B_SHIFT 0
#define MAIN_DEVSTAT_BKUP_BOOTMODE_MASK GENMASK(3, 1)
@@ -24,33 +26,12 @@
#define MAIN_DEVSTAT_BKUP_MMC_PORT_MASK BIT(7)
#define MAIN_DEVSTAT_BKUP_MMC_PORT_SHIFT 7
-#define WKUP_CTRL_MMR0_BASE 0x43000000
-#define MCU_CTRL_MMR0_BASE 0x40f00000
-
#define CTRLMMR_WKUP_DEVSTAT (WKUP_CTRL_MMR0_BASE + 0x30)
#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK GENMASK(5, 3)
#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT 3
#define WKUP_DEVSTAT_MCU_OMLY_MASK BIT(6)
#define WKUP_DEVSTAT_MCU_ONLY_SHIFT 6
-/*
- * The CTRL_MMR0 memory space is divided into several equally-spaced
- * partitions, so defining the partition size allows us to determine
- * register addresses common to those partitions.
- */
-#define CTRL_MMR0_PARTITION_SIZE 0x4000
-
-/*
- * CTRL_MMR0, WKUP_CTRL_MMR0, and MCU_CTR_MMR0 lock/kick-mechanism
- * shared register definitions.
- */
-#define CTRLMMR_LOCK_KICK0 0x01008
-#define CTRLMMR_LOCK_KICK0_UNLOCK_VAL 0x68ef3490
-#define CTRLMMR_LOCK_KICK0_UNLOCKED_MASK BIT(0)
-#define CTRLMMR_LOCK_KICK0_UNLOCKED_SHIFT 0
-#define CTRLMMR_LOCK_KICK1 0x0100c
-#define CTRLMMR_LOCK_KICK1_UNLOCK_VAL 0xd172bc5a
-
/* ROM HANDOFF Structure location */
#define ROM_ENTENDED_BOOT_DATA_INFO 0x41cfdb00