gpio: Add QUICC Engine GPIOs driver
The mpc832x has GPIOs handled by the QUICC Engine.
The registers are different from the one for the
non QE mpc83xx GPIOs.
Implement a GPIO driver for those.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
diff --git a/arch/powerpc/include/asm/arch-mpc83xx/gpio.h b/arch/powerpc/include/asm/arch-mpc83xx/gpio.h
index 19c2506..df95d22 100644
--- a/arch/powerpc/include/asm/arch-mpc83xx/gpio.h
+++ b/arch/powerpc/include/asm/arch-mpc83xx/gpio.h
@@ -22,6 +22,11 @@
uint ngpios;
};
+struct qe_gpio_plat {
+ ulong addr;
+ unsigned long size;
+};
+
#ifndef DM_GPIO
void mpc83xx_gpio_init_f(void);
void mpc83xx_gpio_init_r(void);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 7d5ddbd..9bf6e42 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -547,6 +547,24 @@
value setting, the open-drain feature, which can configure individual
GPIOs to work as open-drain outputs, is supported.
+config QE_GPIO
+ bool "Freescale QUICC ENGINE GPIO driver"
+ depends on DM_GPIO
+ depends on QE
+ help
+ This driver supports the QUICC Engine GPIOs of MPC83XX CPUs.
+ Each GPIO bank is identified by its own entry in the device tree,
+ i.e.
+
+ qe_pio_a: gpio-controller@1400 {
+ compatible = "fsl,mpc8323-qe-pario-bank";
+ reg = <0x1400 0x18>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ Each bank has 32 GPIOs.
+
config MPC8XX_GPIO
bool "Freescale MPC8XX GPIO driver"
depends on DM_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 1e81e36..64a36c4 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -38,6 +38,7 @@
obj-$(CONFIG_DA8XX_GPIO) += da8xx_gpio.o
obj-$(CONFIG_ALTERA_PIO) += altera_pio.o
obj-$(CONFIG_MPC8XXX_GPIO) += mpc8xxx_gpio.o
+obj-$(CONFIG_QE_GPIO) += qe_gpio.o
obj-$(CONFIG_MPC8XX_GPIO) += mpc8xx_gpio.o
obj-$(CONFIG_MPC83XX_SPISEL_BOOT) += mpc83xx_spisel_boot.o
obj-$(CONFIG_SH_GPIO_PFC) += sh_pfc.o
diff --git a/drivers/gpio/qe_gpio.c b/drivers/gpio/qe_gpio.c
new file mode 100644
index 0000000..16e8d1e
--- /dev/null
+++ b/drivers/gpio/qe_gpio.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2023 CR GROUP France
+ * Christophe Leroy <christophe.leroy@csgroup.eu>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <mapmem.h>
+#include <asm/gpio.h>
+#include <asm/immap_83xx.h>
+#include <asm/io.h>
+#include <dm/of_access.h>
+
+#define QE_DIR_NONE 0
+#define QE_DIR_OUT 1
+#define QE_DIR_IN 2
+#define QE_DIR_IN_OUT 3
+
+struct qe_gpio_data {
+ /* The bank's register base in memory */
+ struct gpio_n __iomem *base;
+ /* The address of the registers; used to identify the bank */
+ phys_addr_t addr;
+};
+
+static inline u32 gpio_mask(uint gpio)
+{
+ return 1U << (31 - (gpio));
+}
+
+static inline u32 gpio_mask2(uint gpio)
+{
+ return 1U << (30 - ((gpio & 15) << 1));
+}
+
+static int qe_gpio_direction_input(struct udevice *dev, uint gpio)
+{
+ struct qe_gpio_data *data = dev_get_priv(dev);
+ struct gpio_n __iomem *base = data->base;
+ u32 mask2 = gpio_mask2(gpio);
+
+ if (gpio < 16)
+ clrsetbits_be32(&base->dir1, mask2 * QE_DIR_OUT, mask2 * QE_DIR_IN);
+ else
+ clrsetbits_be32(&base->dir2, mask2 * QE_DIR_OUT, mask2 * QE_DIR_IN);
+
+ return 0;
+}
+
+static int qe_gpio_set_value(struct udevice *dev, uint gpio, int value)
+{
+ struct qe_gpio_data *data = dev_get_priv(dev);
+ struct gpio_n __iomem *base = data->base;
+ u32 mask = gpio_mask(gpio);
+ u32 mask2 = gpio_mask2(gpio);
+
+ if (gpio < 16)
+ clrsetbits_be32(&base->dir1, mask2 * QE_DIR_IN, mask2 * QE_DIR_OUT);
+ else
+ clrsetbits_be32(&base->dir2, mask2 * QE_DIR_IN, mask2 * QE_DIR_OUT);
+
+ if (value)
+ setbits_be32(&base->pdat, mask);
+ else
+ clrbits_be32(&base->pdat, mask);
+
+ return 0;
+}
+
+static int qe_gpio_get_value(struct udevice *dev, uint gpio)
+{
+ struct qe_gpio_data *data = dev_get_priv(dev);
+ struct gpio_n __iomem *base = data->base;
+ u32 mask = gpio_mask(gpio);
+
+ return !!(in_be32(&base->pdat) & mask);
+}
+
+static int qe_gpio_get_function(struct udevice *dev, uint gpio)
+{
+ struct qe_gpio_data *data = dev_get_priv(dev);
+ struct gpio_n __iomem *base = data->base;
+ u32 mask2 = gpio_mask2(gpio);
+ int dir;
+
+ if (gpio < 16)
+ dir = in_be32(&base->dir1);
+ else
+ dir = in_be32(&base->dir2);
+
+ if ((dir & (mask2 * QE_DIR_IN_OUT)) == (mask2 & QE_DIR_IN))
+ return GPIOF_INPUT;
+ else if ((dir & (mask2 * QE_DIR_IN_OUT)) == (mask2 & QE_DIR_OUT))
+ return GPIOF_OUTPUT;
+ else
+ return GPIOF_UNKNOWN;
+}
+
+static int qe_gpio_of_to_plat(struct udevice *dev)
+{
+ struct qe_gpio_plat *plat = dev_get_plat(dev);
+
+ plat->addr = dev_read_addr_size_index(dev, 0, (fdt_size_t *)&plat->size);
+
+ return 0;
+}
+
+static int qe_gpio_plat_to_priv(struct udevice *dev)
+{
+ struct qe_gpio_data *priv = dev_get_priv(dev);
+ struct qe_gpio_plat *plat = dev_get_plat(dev);
+ unsigned long size = plat->size;
+
+ if (size == 0)
+ size = sizeof(struct gpio_n);
+
+ priv->addr = plat->addr;
+ priv->base = (void __iomem *)plat->addr;
+
+ if (!priv->base)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int qe_gpio_probe(struct udevice *dev)
+{
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct qe_gpio_data *data = dev_get_priv(dev);
+ char name[32], *str;
+
+ qe_gpio_plat_to_priv(dev);
+
+ snprintf(name, sizeof(name), "QE@%.8llx",
+ (unsigned long long)data->addr);
+ str = strdup(name);
+
+ if (!str)
+ return -ENOMEM;
+
+ uc_priv->bank_name = str;
+ uc_priv->gpio_count = 32;
+
+ return 0;
+}
+
+static const struct dm_gpio_ops gpio_qe_ops = {
+ .direction_input = qe_gpio_direction_input,
+ .direction_output = qe_gpio_set_value,
+ .get_value = qe_gpio_get_value,
+ .set_value = qe_gpio_set_value,
+ .get_function = qe_gpio_get_function,
+};
+
+static const struct udevice_id qe_gpio_ids[] = {
+ { .compatible = "fsl,mpc8323-qe-pario-bank"},
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(gpio_qe) = {
+ .name = "gpio_qe",
+ .id = UCLASS_GPIO,
+ .ops = &gpio_qe_ops,
+ .of_to_plat = qe_gpio_of_to_plat,
+ .plat_auto = sizeof(struct qe_gpio_plat),
+ .of_match = qe_gpio_ids,
+ .probe = qe_gpio_probe,
+ .priv_auto = sizeof(struct qe_gpio_data),
+};