ARM: OMAP: Convert IO macros
Convert IO macros to readx/writex.
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index d2e8207..4427938 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -25,9 +25,6 @@
#include <asm/arch/i2c.h>
#include <asm/io.h>
-#define inw(a) __raw_readw(a)
-#define outw(a,v) __raw_writew(a,v)
-
static void wait_for_bb (void);
static u16 wait_for_pin (void);
static void flush_fifo(void);
@@ -36,32 +33,32 @@
{
u16 scl;
- outw(0x2, I2C_SYSC); /* for ES2 after soft reset */
+ writew(0x2, I2C_SYSC); /* for ES2 after soft reset */
udelay(1000);
- outw(0x0, I2C_SYSC); /* will probably self clear but */
+ writew(0x0, I2C_SYSC); /* will probably self clear but */
- if (inw (I2C_CON) & I2C_CON_EN) {
- outw (0, I2C_CON);
+ if (readw (I2C_CON) & I2C_CON_EN) {
+ writew (0, I2C_CON);
udelay (50000);
}
/* 12MHz I2C module clock */
- outw (0, I2C_PSC);
+ writew (0, I2C_PSC);
speed = speed/1000; /* 100 or 400 */
scl = ((12000/(speed*2)) - 7); /* use 7 when PSC = 0 */
- outw (scl, I2C_SCLL);
- outw (scl, I2C_SCLH);
+ writew (scl, I2C_SCLL);
+ writew (scl, I2C_SCLH);
/* own address */
- outw (slaveadd, I2C_OA);
- outw (I2C_CON_EN, I2C_CON);
+ writew (slaveadd, I2C_OA);
+ writew (I2C_CON_EN, I2C_CON);
/* have to enable intrrupts or OMAP i2c module doesn't work */
- outw (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
- I2C_IE_NACK_IE | I2C_IE_AL_IE, I2C_IE);
+ writew (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
+ I2C_IE_NACK_IE | I2C_IE_AL_IE, I2C_IE);
udelay (1000);
flush_fifo();
- outw (0xFFFF, I2C_STAT);
- outw (0, I2C_CNT);
+ writew (0xFFFF, I2C_STAT);
+ writew (0, I2C_CNT);
}
static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
@@ -73,19 +70,19 @@
wait_for_bb ();
/* one byte only */
- outw (1, I2C_CNT);
+ writew (1, I2C_CNT);
/* set slave address */
- outw (devaddr, I2C_SA);
+ writew (devaddr, I2C_SA);
/* no stop bit needed here */
- outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, I2C_CON);
+ writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, I2C_CON);
status = wait_for_pin ();
if (status & I2C_STAT_XRDY) {
/* Important: have to use byte access */
- *(volatile u8 *) (I2C_DATA) = regoffset;
+ writeb (regoffset, I2C_DATA);
udelay (20000);
- if (inw (I2C_STAT) & I2C_STAT_NACK) {
+ if (readw (I2C_STAT) & I2C_STAT_NACK) {
i2c_error = 1;
}
} else {
@@ -94,42 +91,42 @@
if (!i2c_error) {
/* free bus, otherwise we can't use a combined transction */
- outw (0, I2C_CON);
- while (inw (I2C_STAT) || (inw (I2C_CON) & I2C_CON_MST)) {
+ writew (0, I2C_CON);
+ while (readw (I2C_STAT) || (readw (I2C_CON) & I2C_CON_MST)) {
udelay (10000);
/* Have to clear pending interrupt to clear I2C_STAT */
- outw (0xFFFF, I2C_STAT);
+ writew (0xFFFF, I2C_STAT);
}
wait_for_bb ();
/* set slave address */
- outw (devaddr, I2C_SA);
+ writew (devaddr, I2C_SA);
/* read one byte from slave */
- outw (1, I2C_CNT);
+ writew (1, I2C_CNT);
/* need stop bit here */
- outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP,
- I2C_CON);
+ writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP,
+ I2C_CON);
status = wait_for_pin ();
if (status & I2C_STAT_RRDY) {
- *value = inw (I2C_DATA);
+ *value = readw (I2C_DATA);
udelay (20000);
} else {
i2c_error = 1;
}
if (!i2c_error) {
- outw (I2C_CON_EN, I2C_CON);
- while (inw (I2C_STAT)
- || (inw (I2C_CON) & I2C_CON_MST)) {
+ writew (I2C_CON_EN, I2C_CON);
+ while (readw (I2C_STAT)
+ || (readw (I2C_CON) & I2C_CON_MST)) {
udelay (10000);
- outw (0xFFFF, I2C_STAT);
+ writew (0xFFFF, I2C_STAT);
}
}
}
flush_fifo();
- outw (0xFFFF, I2C_STAT);
- outw (0, I2C_CNT);
+ writew (0xFFFF, I2C_STAT);
+ writew (0, I2C_CNT);
return i2c_error;
}
@@ -142,22 +139,22 @@
wait_for_bb ();
/* two bytes */
- outw (2, I2C_CNT);
+ writew (2, I2C_CNT);
/* set slave address */
- outw (devaddr, I2C_SA);
+ writew (devaddr, I2C_SA);
/* stop bit needed here */
- outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
- I2C_CON_STP, I2C_CON);
+ writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
+ I2C_CON_STP, I2C_CON);
/* wait until state change */
status = wait_for_pin ();
if (status & I2C_STAT_XRDY) {
/* send out two bytes */
- outw ((value << 8) + regoffset, I2C_DATA);
+ writew ((value << 8) + regoffset, I2C_DATA);
/* must have enough delay to allow BB bit to go low */
udelay (50000);
- if (inw (I2C_STAT) & I2C_STAT_NACK) {
+ if (readw (I2C_STAT) & I2C_STAT_NACK) {
i2c_error = 1;
}
} else {
@@ -167,18 +164,18 @@
if (!i2c_error) {
int eout = 200;
- outw (I2C_CON_EN, I2C_CON);
- while ((stat = inw (I2C_STAT)) || (inw (I2C_CON) & I2C_CON_MST)) {
+ writew (I2C_CON_EN, I2C_CON);
+ while ((stat = readw (I2C_STAT)) || (readw (I2C_CON) & I2C_CON_MST)) {
udelay (1000);
/* have to read to clear intrrupt */
- outw (0xFFFF, I2C_STAT);
+ writew (0xFFFF, I2C_STAT);
if(--eout == 0) /* better leave with error than hang */
break;
}
}
flush_fifo();
- outw (0xFFFF, I2C_STAT);
- outw (0, I2C_CNT);
+ writew (0xFFFF, I2C_STAT);
+ writew (0, I2C_CNT);
return i2c_error;
}
@@ -189,10 +186,10 @@
* you get a bus error
*/
while(1){
- stat = inw(I2C_STAT);
+ stat = readw(I2C_STAT);
if(stat == I2C_STAT_RRDY){
- inw(I2C_DATA);
- outw(I2C_STAT_RRDY,I2C_STAT);
+ readw(I2C_DATA);
+ writew(I2C_STAT_RRDY,I2C_STAT);
udelay(1000);
}else
break;
@@ -203,7 +200,7 @@
{
int res = 1; /* default = fail */
- if (chip == inw (I2C_OA)) {
+ if (chip == readw (I2C_OA)) {
return res;
}
@@ -211,27 +208,27 @@
wait_for_bb ();
/* try to read one byte */
- outw (1, I2C_CNT);
+ writew (1, I2C_CNT);
/* set slave address */
- outw (chip, I2C_SA);
+ writew (chip, I2C_SA);
/* stop bit needed here */
- outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, I2C_CON);
+ writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, I2C_CON);
/* enough delay for the NACK bit set */
udelay (50000);
- if (!(inw (I2C_STAT) & I2C_STAT_NACK)) {
+ if (!(readw (I2C_STAT) & I2C_STAT_NACK)) {
res = 0; /* success case */
flush_fifo();
- outw(0xFFFF, I2C_STAT);
+ writew(0xFFFF, I2C_STAT);
} else {
- outw(0xFFFF, I2C_STAT); /* failue, clear sources*/
- outw (inw (I2C_CON) | I2C_CON_STP, I2C_CON); /* finish up xfer */
+ writew(0xFFFF, I2C_STAT); /* failue, clear sources*/
+ writew (readw (I2C_CON) | I2C_CON_STP, I2C_CON); /* finish up xfer */
udelay(20000);
wait_for_bb ();
}
flush_fifo();
- outw (0, I2C_CNT); /* don't allow any more data in...we don't want it.*/
- outw(0xFFFF, I2C_STAT);
+ writew (0, I2C_CNT); /* don't allow any more data in...we don't want it.*/
+ writew(0xFFFF, I2C_STAT);
return res;
}
@@ -290,17 +287,17 @@
int timeout = 10;
u16 stat;
- outw(0xFFFF, I2C_STAT); /* clear current interruts...*/
- while ((stat = inw (I2C_STAT) & I2C_STAT_BB) && timeout--) {
- outw (stat, I2C_STAT);
+ writew(0xFFFF, I2C_STAT); /* clear current interruts...*/
+ while ((stat = readw (I2C_STAT) & I2C_STAT_BB) && timeout--) {
+ writew (stat, I2C_STAT);
udelay (50000);
}
if (timeout <= 0) {
printf ("timed out in wait_for_bb: I2C_STAT=%x\n",
- inw (I2C_STAT));
+ readw (I2C_STAT));
}
- outw(0xFFFF, I2C_STAT); /* clear delayed stuff*/
+ writew(0xFFFF, I2C_STAT); /* clear delayed stuff*/
}
static u16 wait_for_pin (void)
@@ -310,7 +307,7 @@
do {
udelay (1000);
- status = inw (I2C_STAT);
+ status = readw (I2C_STAT);
} while ( !(status &
(I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
@@ -318,8 +315,8 @@
if (timeout <= 0) {
printf ("timed out in wait_for_pin: I2C_STAT=%x\n",
- inw (I2C_STAT));
- outw(0xFFFF, I2C_STAT);
+ readw (I2C_STAT));
+ writew(0xFFFF, I2C_STAT);
}
return status;
}