| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2015 Google, Inc |
| * Written by Simon Glass <sjg@chromium.org> |
| * |
| * (C) 2017 Theobroma Systems Design und Consulting GmbH |
| * |
| * Helper functions for Rockchip images |
| */ |
| |
| #include "imagetool.h" |
| #include <image.h> |
| #include <u-boot/sha256.h> |
| #include <rc4.h> |
| #include "mkimage.h" |
| #include "rkcommon.h" |
| |
| enum { |
| RK_MAGIC = 0x0ff0aa55, |
| RK_MAGIC_V2 = 0x534E4B52, |
| }; |
| |
| enum { |
| RK_HEADER_V1 = 1, |
| RK_HEADER_V2 = 2, |
| }; |
| |
| enum hash_type { |
| HASH_NONE = 0, |
| HASH_SHA256 = 1, |
| HASH_SHA512 = 2, |
| }; |
| |
| /** |
| * struct image_entry |
| * |
| * @size_and_off: [31:16]image size;[15:0]image offset |
| * @address: default as 0xFFFFFFFF |
| * @flag: no use |
| * @counter: no use |
| * @hash: hash of image |
| * |
| */ |
| struct image_entry { |
| uint32_t size_and_off; |
| uint32_t address; |
| uint32_t flag; |
| uint32_t counter; |
| uint8_t reserved[8]; |
| uint8_t hash[64]; |
| }; |
| |
| /** |
| * struct header0_info_v2 - v2 header block for rockchip BootRom |
| * |
| * This is stored at SD card block 64 (where each block is 512 bytes) |
| * |
| * @magic: Magic (must be RK_MAGIC_V2) |
| * @size_and_nimage: [31:16]number of images;[15:0] |
| * offset to hash field of header(unit as 4Byte) |
| * @boot_flag: [3:0]hash type(0:none,1:sha256,2:sha512) |
| * @signature: hash or signature for header info |
| * |
| */ |
| struct header0_info_v2 { |
| uint32_t magic; |
| uint8_t reserved[4]; |
| uint32_t size_and_nimage; |
| uint32_t boot_flag; |
| uint8_t reserved1[104]; |
| struct image_entry images[4]; |
| uint8_t reserved2[1064]; |
| uint8_t hash[512]; |
| }; |
| |
| /** |
| * struct header0_info - header block for boot ROM |
| * |
| * This is stored at SD card block 64 (where each block is 512 bytes, or at |
| * the start of SPI flash. It is encoded with RC4. |
| * |
| * @magic: Magic (must be RK_MAGIC) |
| * @disable_rc4: 0 to use rc4 for boot image, 1 to use plain binary |
| * @init_offset: Offset in blocks of the SPL code from this header |
| * block. E.g. 4 means 2KB after the start of this header. |
| * Other fields are not used by U-Boot |
| */ |
| struct header0_info { |
| uint32_t magic; |
| uint8_t reserved[4]; |
| uint32_t disable_rc4; |
| uint16_t init_offset; |
| uint8_t reserved1[492]; |
| uint16_t init_size; |
| uint16_t init_boot_size; |
| uint8_t reserved2[2]; |
| }; |
| |
| /** |
| * struct header1_info |
| */ |
| struct header1_info { |
| uint32_t magic; |
| }; |
| |
| /** |
| * struct spl_info - spl info for each chip |
| * |
| * @imagename: Image name(passed by "mkimage -n") |
| * @spl_hdr: Boot ROM requires a 4-bytes spl header |
| * @spl_size: Spl size(include extra 4-bytes spl header) |
| * @spl_rc4: RC4 encode the SPL binary (same key as header) |
| * @header_ver: header block version |
| */ |
| struct spl_info { |
| const char *imagename; |
| const char *spl_hdr; |
| const uint32_t spl_size; |
| const bool spl_rc4; |
| const uint32_t header_ver; |
| }; |
| |
| static struct spl_info spl_infos[] = { |
| { "px30", "RK33", 0x2800, false, RK_HEADER_V1 }, |
| { "rk3036", "RK30", 0x1000, false, RK_HEADER_V1 }, |
| { "rk3066", "RK30", 0x8000 - 0x800, true, RK_HEADER_V1 }, |
| { "rk3128", "RK31", 0x1800, false, RK_HEADER_V1 }, |
| { "rk3188", "RK31", 0x8000 - 0x800, true, RK_HEADER_V1 }, |
| { "rk322x", "RK32", 0x8000 - 0x1000, false, RK_HEADER_V1 }, |
| { "rk3288", "RK32", 0x8000, false, RK_HEADER_V1 }, |
| { "rk3308", "RK33", 0x40000 - 0x1000, false, RK_HEADER_V1 }, |
| { "rk3328", "RK32", 0x8000 - 0x800, false, RK_HEADER_V1 }, |
| { "rk3368", "RK33", 0x8000 - 0x1000, false, RK_HEADER_V1 }, |
| { "rk3399", "RK33", 0x30000 - 0x2000, false, RK_HEADER_V1 }, |
| { "rv1108", "RK11", 0x1800, false, RK_HEADER_V1 }, |
| { "rv1126", "110B", 0x10000 - 0x1000, false, RK_HEADER_V1 }, |
| { "rk3568", "RK35", 0x10000 - 0x1000, false, RK_HEADER_V2 }, |
| }; |
| |
| /** |
| * struct spl_params - spl params parsed in check_params() |
| * |
| * @init_file: Init data file path |
| * @init_size: Aligned size of init data in bytes |
| * @boot_file: Boot data file path |
| * @boot_size: Aligned size of boot data in bytes |
| */ |
| |
| struct spl_params { |
| char *init_file; |
| uint32_t init_size; |
| char *boot_file; |
| uint32_t boot_size; |
| }; |
| |
| static struct spl_params spl_params = { 0 }; |
| |
| static const unsigned char rc4_key[16] = { |
| 124, 78, 3, 4, 85, 5, 9, 7, |
| 45, 44, 123, 56, 23, 13, 23, 17 |
| }; |
| |
| static struct spl_info *rkcommon_get_spl_info(char *imagename) |
| { |
| int i; |
| |
| if (!imagename) |
| return NULL; |
| |
| for (i = 0; i < ARRAY_SIZE(spl_infos); i++) |
| if (!strncmp(imagename, spl_infos[i].imagename, 6)) |
| return spl_infos + i; |
| |
| return NULL; |
| } |
| |
| static int rkcommon_get_aligned_size(struct image_tool_params *params, |
| const char *fname) |
| { |
| int size; |
| |
| size = imagetool_get_filesize(params, fname); |
| if (size < 0) |
| return -1; |
| |
| /* |
| * Pad to a 2KB alignment, as required for init/boot size by the ROM |
| * (see https://lists.denx.de/pipermail/u-boot/2017-May/293268.html) |
| */ |
| return ROUND(size, RK_SIZE_ALIGN); |
| } |
| |
| int rkcommon_check_params(struct image_tool_params *params) |
| { |
| int i, size; |
| |
| /* |
| * If this is a operation (list or extract), the don't require |
| * imagename to be set. |
| */ |
| if (params->lflag || params->iflag) |
| return EXIT_SUCCESS; |
| |
| if (!rkcommon_get_spl_info(params->imagename)) |
| goto err_spl_info; |
| |
| spl_params.init_file = params->datafile; |
| |
| spl_params.boot_file = strchr(spl_params.init_file, ':'); |
| if (spl_params.boot_file) { |
| *spl_params.boot_file = '\0'; |
| spl_params.boot_file += 1; |
| } |
| |
| size = rkcommon_get_aligned_size(params, spl_params.init_file); |
| if (size < 0) |
| return EXIT_FAILURE; |
| spl_params.init_size = size; |
| |
| /* Boot file is optional, and only for back-to-bootrom functionality. */ |
| if (spl_params.boot_file) { |
| size = rkcommon_get_aligned_size(params, spl_params.boot_file); |
| if (size < 0) |
| return EXIT_FAILURE; |
| spl_params.boot_size = size; |
| } |
| |
| if (spl_params.init_size > rkcommon_get_spl_size(params)) { |
| fprintf(stderr, |
| "Error: SPL image is too large (size %#x than %#x)\n", |
| spl_params.init_size, rkcommon_get_spl_size(params)); |
| return EXIT_FAILURE; |
| } |
| |
| return EXIT_SUCCESS; |
| |
| err_spl_info: |
| fprintf(stderr, "ERROR: imagename (%s) is not supported!\n", |
| params->imagename ? params->imagename : "NULL"); |
| |
| fprintf(stderr, "Available imagename:"); |
| for (i = 0; i < ARRAY_SIZE(spl_infos); i++) |
| fprintf(stderr, "\t%s", spl_infos[i].imagename); |
| fprintf(stderr, "\n"); |
| |
| return EXIT_FAILURE; |
| } |
| |
| const char *rkcommon_get_spl_hdr(struct image_tool_params *params) |
| { |
| struct spl_info *info = rkcommon_get_spl_info(params->imagename); |
| |
| /* |
| * info would not be NULL, because of we checked params before. |
| */ |
| return info->spl_hdr; |
| } |
| |
| int rkcommon_get_spl_size(struct image_tool_params *params) |
| { |
| struct spl_info *info = rkcommon_get_spl_info(params->imagename); |
| |
| /* |
| * info would not be NULL, because of we checked params before. |
| */ |
| return info->spl_size; |
| } |
| |
| bool rkcommon_need_rc4_spl(struct image_tool_params *params) |
| { |
| struct spl_info *info = rkcommon_get_spl_info(params->imagename); |
| |
| /* |
| * info would not be NULL, because of we checked params before. |
| */ |
| return info->spl_rc4; |
| } |
| |
| bool rkcommon_is_header_v2(struct image_tool_params *params) |
| { |
| struct spl_info *info = rkcommon_get_spl_info(params->imagename); |
| |
| return (info->header_ver == RK_HEADER_V2); |
| } |
| |
| static void do_sha256_hash(uint8_t *buf, uint32_t size, uint8_t *out) |
| { |
| sha256_context ctx; |
| |
| sha256_starts(&ctx); |
| sha256_update(&ctx, buf, size); |
| sha256_finish(&ctx, out); |
| } |
| |
| static void rkcommon_set_header0(void *buf, struct image_tool_params *params) |
| { |
| struct header0_info *hdr = buf; |
| uint32_t init_boot_size; |
| |
| memset(buf, '\0', RK_INIT_OFFSET * RK_BLK_SIZE); |
| hdr->magic = cpu_to_le32(RK_MAGIC); |
| hdr->disable_rc4 = cpu_to_le32(!rkcommon_need_rc4_spl(params)); |
| hdr->init_offset = cpu_to_le16(RK_INIT_OFFSET); |
| hdr->init_size = cpu_to_le16(spl_params.init_size / RK_BLK_SIZE); |
| |
| /* |
| * init_boot_size needs to be set, as it is read by the BootROM |
| * to determine the size of the next-stage bootloader (e.g. U-Boot |
| * proper), when used with the back-to-bootrom functionality. |
| * |
| * see https://lists.denx.de/pipermail/u-boot/2017-May/293267.html |
| * for a more detailed explanation by Andy Yan |
| */ |
| if (spl_params.boot_file) |
| init_boot_size = spl_params.init_size + spl_params.boot_size; |
| else |
| init_boot_size = spl_params.init_size + RK_MAX_BOOT_SIZE; |
| hdr->init_boot_size = cpu_to_le16(init_boot_size / RK_BLK_SIZE); |
| |
| rc4_encode(buf, RK_BLK_SIZE, rc4_key); |
| } |
| |
| static void rkcommon_set_header0_v2(void *buf, struct image_tool_params *params) |
| { |
| struct header0_info_v2 *hdr = buf; |
| uint32_t sector_offset, image_sector_count; |
| uint32_t image_size_array[2]; |
| uint8_t *image_ptr = NULL; |
| int i; |
| |
| printf("Image Type: Rockchip %s boot image\n", |
| rkcommon_get_spl_hdr(params)); |
| memset(buf, '\0', RK_INIT_OFFSET * RK_BLK_SIZE); |
| hdr->magic = cpu_to_le32(RK_MAGIC_V2); |
| hdr->size_and_nimage = cpu_to_le32((2 << 16) + 384); |
| hdr->boot_flag = cpu_to_le32(HASH_SHA256); |
| sector_offset = 4; |
| image_size_array[0] = spl_params.init_size; |
| image_size_array[1] = spl_params.boot_size; |
| |
| for (i = 0; i < 2; i++) { |
| image_sector_count = image_size_array[i] / RK_BLK_SIZE; |
| hdr->images[i].size_and_off = cpu_to_le32((image_sector_count |
| << 16) + sector_offset); |
| hdr->images[i].address = 0xFFFFFFFF; |
| hdr->images[i].counter = cpu_to_le32(i + 1); |
| image_ptr = buf + sector_offset * RK_BLK_SIZE; |
| do_sha256_hash(image_ptr, image_size_array[i], |
| hdr->images[i].hash); |
| sector_offset = sector_offset + image_sector_count; |
| } |
| |
| do_sha256_hash(buf, (void *)hdr->hash - buf, hdr->hash); |
| } |
| |
| void rkcommon_set_header(void *buf, struct stat *sbuf, int ifd, |
| struct image_tool_params *params) |
| { |
| struct header1_info *hdr = buf + RK_SPL_HDR_START; |
| |
| if (rkcommon_is_header_v2(params)) { |
| rkcommon_set_header0_v2(buf, params); |
| } else { |
| rkcommon_set_header0(buf, params); |
| |
| /* Set up the SPL name (i.e. copy spl_hdr over) */ |
| if (memcmp(&hdr->magic, "RSAK", 4)) |
| memcpy(&hdr->magic, rkcommon_get_spl_hdr(params), RK_SPL_HDR_SIZE); |
| |
| if (rkcommon_need_rc4_spl(params)) |
| rkcommon_rc4_encode_spl(buf, RK_SPL_HDR_START, |
| spl_params.init_size); |
| |
| if (spl_params.boot_file) { |
| if (rkcommon_need_rc4_spl(params)) |
| rkcommon_rc4_encode_spl(buf + RK_SPL_HDR_START, |
| spl_params.init_size, |
| spl_params.boot_size); |
| } |
| } |
| } |
| |
| static inline unsigned int rkcommon_offset_to_spi(unsigned int offset) |
| { |
| /* |
| * While SD/MMC images use a flat addressing, SPI images are padded |
| * to use the first 2K of every 4K sector only. |
| */ |
| return ((offset & ~0x7ff) << 1) + (offset & 0x7ff); |
| } |
| |
| static int rkcommon_parse_header(const void *buf, struct header0_info *header0, |
| struct spl_info **spl_info) |
| { |
| unsigned int hdr1_offset; |
| struct header1_info *hdr1_sdmmc, *hdr1_spi; |
| int i; |
| |
| if (spl_info) |
| *spl_info = NULL; |
| |
| /* |
| * The first header (hdr0) is always RC4 encoded, so try to decrypt |
| * with the well-known key. |
| */ |
| memcpy((void *)header0, buf, sizeof(struct header0_info)); |
| rc4_encode((void *)header0, sizeof(struct header0_info), rc4_key); |
| |
| if (le32_to_cpu(header0->magic) != RK_MAGIC) |
| return -EPROTO; |
| |
| /* We don't support RC4 encoded image payloads here, yet... */ |
| if (le32_to_cpu(header0->disable_rc4) == 0) |
| return -ENOSYS; |
| |
| hdr1_offset = le16_to_cpu(header0->init_offset) * RK_BLK_SIZE; |
| hdr1_sdmmc = (struct header1_info *)(buf + hdr1_offset); |
| hdr1_spi = (struct header1_info *)(buf + |
| rkcommon_offset_to_spi(hdr1_offset)); |
| |
| for (i = 0; i < ARRAY_SIZE(spl_infos); i++) { |
| if (!memcmp(&hdr1_sdmmc->magic, spl_infos[i].spl_hdr, |
| RK_SPL_HDR_SIZE)) { |
| if (spl_info) |
| *spl_info = &spl_infos[i]; |
| return IH_TYPE_RKSD; |
| } else if (!memcmp(&hdr1_spi->magic, spl_infos[i].spl_hdr, |
| RK_SPL_HDR_SIZE)) { |
| if (spl_info) |
| *spl_info = &spl_infos[i]; |
| return IH_TYPE_RKSPI; |
| } |
| } |
| |
| return -1; |
| } |
| |
| static int rkcommon_parse_header_v2(const void *buf, struct header0_info_v2 *header) |
| { |
| memcpy((void *)header, buf, sizeof(struct header0_info_v2)); |
| |
| if (le32_to_cpu(header->magic) != RK_MAGIC_V2) |
| return -EPROTO; |
| |
| return 0; |
| } |
| |
| int rkcommon_verify_header(unsigned char *buf, int size, |
| struct image_tool_params *params) |
| { |
| struct header0_info header0; |
| struct spl_info *img_spl_info, *spl_info; |
| int ret; |
| |
| /* spl_hdr is abandon on header_v2 */ |
| if ((*(uint32_t *)buf) == RK_MAGIC_V2) |
| return 0; |
| |
| ret = rkcommon_parse_header(buf, &header0, &img_spl_info); |
| |
| /* If this is the (unimplemented) RC4 case, then rewrite the result */ |
| if (ret == -ENOSYS) |
| return 0; |
| |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * If no 'imagename' is specified via the commandline (e.g. if this is |
| * 'dumpimage -l' w/o any further constraints), we accept any spl_info. |
| */ |
| if (params->imagename == NULL) |
| return 0; |
| |
| /* Match the 'imagename' against the 'spl_hdr' found */ |
| spl_info = rkcommon_get_spl_info(params->imagename); |
| if (spl_info && img_spl_info) |
| return strcmp(spl_info->spl_hdr, img_spl_info->spl_hdr); |
| |
| return -ENOENT; |
| } |
| |
| void rkcommon_print_header(const void *buf) |
| { |
| struct header0_info header0; |
| struct header0_info_v2 header0_v2; |
| struct spl_info *spl_info; |
| uint8_t image_type; |
| int ret, boot_size, init_size; |
| |
| if ((*(uint32_t *)buf) == RK_MAGIC_V2) { |
| ret = rkcommon_parse_header_v2(buf, &header0_v2); |
| |
| if (ret < 0) { |
| fprintf(stderr, "Error: image verification failed\n"); |
| return; |
| } |
| |
| init_size = header0_v2.images[0].size_and_off >> 16; |
| init_size = init_size * RK_BLK_SIZE; |
| boot_size = header0_v2.images[1].size_and_off >> 16; |
| boot_size = boot_size * RK_BLK_SIZE; |
| } else { |
| ret = rkcommon_parse_header(buf, &header0, &spl_info); |
| |
| /* If this is the (unimplemented) RC4 case, then fail silently */ |
| if (ret == -ENOSYS) |
| return; |
| |
| if (ret < 0) { |
| fprintf(stderr, "Error: image verification failed\n"); |
| return; |
| } |
| |
| image_type = ret; |
| init_size = header0.init_size * RK_BLK_SIZE; |
| boot_size = header0.init_boot_size * RK_BLK_SIZE - init_size; |
| |
| printf("Image Type: Rockchip %s (%s) boot image\n", |
| spl_info->spl_hdr, |
| (image_type == IH_TYPE_RKSD) ? "SD/MMC" : "SPI"); |
| } |
| |
| printf("Init Data Size: %d bytes\n", init_size); |
| |
| if (boot_size != RK_MAX_BOOT_SIZE) |
| printf("Boot Data Size: %d bytes\n", boot_size); |
| } |
| |
| void rkcommon_rc4_encode_spl(void *buf, unsigned int offset, unsigned int size) |
| { |
| unsigned int remaining = size; |
| |
| while (remaining > 0) { |
| int step = (remaining > RK_BLK_SIZE) ? RK_BLK_SIZE : remaining; |
| |
| rc4_encode(buf + offset, step, rc4_key); |
| offset += RK_BLK_SIZE; |
| remaining -= step; |
| } |
| } |
| |
| int rkcommon_vrec_header(struct image_tool_params *params, |
| struct image_type_params *tparams) |
| { |
| /* |
| * The SPL image looks as follows: |
| * |
| * 0x0 header0 (see rkcommon.c) |
| * 0x800 spl_name ('RK30', ..., 'RK33') |
| * (start of the payload for AArch64 payloads: we expect the |
| * first 4 bytes to be available for overwriting with our |
| * spl_name) |
| * 0x804 first instruction to be executed |
| * (start of the image/payload for 32bit payloads) |
| * |
| * For AArch64 (ARMv8) payloads, natural alignment (8-bytes) is |
| * required for its sections (so the image we receive needs to |
| * have the first 4 bytes reserved for the spl_name). Reserving |
| * these 4 bytes is done using the BOOT0_HOOK infrastructure. |
| * |
| * The header is always at 0x800 (as we now use a payload |
| * prepadded using the boot0 hook for all targets): the first |
| * 4 bytes of these images can safely be overwritten using the |
| * boot magic. |
| */ |
| tparams->header_size = RK_SPL_HDR_START; |
| |
| /* Allocate, clear and install the header */ |
| tparams->hdr = malloc(tparams->header_size); |
| if (!tparams->hdr) { |
| fprintf(stderr, "%s: Can't alloc header: %s\n", |
| params->cmdname, strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| memset(tparams->hdr, 0, tparams->header_size); |
| |
| /* |
| * We need to store the original file-size (i.e. before padding), as |
| * imagetool does not set this during its adjustment of file_size. |
| */ |
| params->orig_file_size = tparams->header_size + |
| spl_params.init_size + spl_params.boot_size; |
| |
| params->file_size = ROUND(params->orig_file_size, RK_SIZE_ALIGN); |
| |
| /* Ignoring pad len, since we are using our own copy_image() */ |
| return 0; |
| } |
| |
| static int pad_file(struct image_tool_params *params, int ifd, int pad) |
| { |
| uint8_t zeros[4096]; |
| |
| memset(zeros, 0, sizeof(zeros)); |
| |
| while (pad > 0) { |
| int todo = sizeof(zeros); |
| |
| if (todo > pad) |
| todo = pad; |
| if (write(ifd, (char *)&zeros, todo) != todo) { |
| fprintf(stderr, "%s: Write error on %s: %s\n", |
| params->cmdname, params->imagefile, |
| strerror(errno)); |
| return -1; |
| } |
| pad -= todo; |
| } |
| |
| return 0; |
| } |
| |
| static int copy_file(struct image_tool_params *params, int ifd, |
| const char *file, int padded_size) |
| { |
| int dfd; |
| struct stat sbuf; |
| unsigned char *ptr; |
| int size; |
| |
| if (params->vflag) |
| fprintf(stderr, "Adding Image %s\n", file); |
| |
| dfd = open(file, O_RDONLY | O_BINARY); |
| if (dfd < 0) { |
| fprintf(stderr, "%s: Can't open %s: %s\n", |
| params->cmdname, file, strerror(errno)); |
| return -1; |
| } |
| |
| if (fstat(dfd, &sbuf) < 0) { |
| fprintf(stderr, "%s: Can't stat %s: %s\n", |
| params->cmdname, file, strerror(errno)); |
| goto err_close; |
| } |
| |
| if (params->vflag) |
| fprintf(stderr, "Size %u(pad to %u)\n", |
| (int)sbuf.st_size, padded_size); |
| |
| ptr = mmap(0, sbuf.st_size, PROT_READ, MAP_SHARED, dfd, 0); |
| if (ptr == MAP_FAILED) { |
| fprintf(stderr, "%s: Can't read %s: %s\n", |
| params->cmdname, file, strerror(errno)); |
| goto err_munmap; |
| } |
| |
| size = sbuf.st_size; |
| if (write(ifd, ptr, size) != size) { |
| fprintf(stderr, "%s: Write error on %s: %s\n", |
| params->cmdname, params->imagefile, strerror(errno)); |
| goto err_munmap; |
| } |
| |
| munmap((void *)ptr, sbuf.st_size); |
| close(dfd); |
| return pad_file(params, ifd, padded_size - size); |
| |
| err_munmap: |
| munmap((void *)ptr, sbuf.st_size); |
| err_close: |
| close(dfd); |
| return -1; |
| } |
| |
| int rockchip_copy_image(int ifd, struct image_tool_params *params) |
| { |
| int ret; |
| |
| ret = copy_file(params, ifd, spl_params.init_file, |
| spl_params.init_size); |
| if (ret) |
| return ret; |
| |
| if (spl_params.boot_file) { |
| ret = copy_file(params, ifd, spl_params.boot_file, |
| spl_params.boot_size); |
| if (ret) |
| return ret; |
| } |
| |
| return pad_file(params, ifd, |
| params->file_size - params->orig_file_size); |
| } |