* Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
additional ethernet addresses.
* Cleanup drivers/i82365.c - avoid duplication of code
* Fix bogus "cannot span across banks" flash error message
* Add support for CompactFlash for the CPC45 Board.
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index 5cf2a04..5ab6fe6 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -106,6 +106,7 @@
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTARGS "root=/dev/ram rw"
#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61
#define CONFIG_IPADDR 192.162.1.2
#define CONFIG_NETMASK 255.255.255.0
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 1542047..d64dd2a 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -98,6 +98,7 @@
/* Ethernet stuff */
#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
#define CONFIG_ETHADDR 00:50:C2:1E:AF:FE
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:50:C2:1E:AF:FD
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index 5a00133..8de9819 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -50,8 +50,6 @@
#define CONFIG_BAUDRATE 9600
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
#define CONFIG_BOOTDELAY 5
@@ -63,7 +61,10 @@
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_EEPROM | \
+ CFG_CMD_FAT | \
+ CFG_CMD_FLASH | \
CFG_CMD_I2C | \
+ CFG_CMD_IDE | \
CFG_CMD_PCI | \
CFG_CMD_SDRAM )
@@ -344,7 +345,7 @@
#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */
#define BCSR_BASE 0x80600000 /* board control / status registers */
#define DISPLAY_BASE 0x80600040 /* DISPLAY base */
-#define PCMCIA_MEM_BASE 0x81000000 /* PCMCIA memory window base */
+#define PCMCIA_MEM_BASE 0x83000000 /* PCMCIA memory window base */
#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */
@@ -464,4 +465,46 @@
#define PCI_ENET0_MEMADDR 0x82000000
#define PCI_PLX9030_IOADDR 0x82100000
#define PCI_PLX9030_MEMADDR 0x82100000
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_I82365
+
+#define CFG_PCMCIA_MEM_ADDR PCMCIA_MEM_BASE
+#define CFG_PCMCIA_MEM_SIZE 0x1000
+
+#define CONFIG_PCMCIA_SLOT_A
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_RESET /* reset for IDE not supported */
+#define CONFIG_IDE_LED /* LED for IDE is supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+#define CONFIG_HMI10
+
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
+
+#define CFG_ATA_DATA_OFFSET CFG_PCMCIA_MEM_SIZE
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET CFG_PCMCIA_MEM_SIZE
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x400)
+
+#define CONFIG_DOS_PARTITION
+
#endif /* __CONFIG_H */
diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h
index e318b27..d6ce8a8 100644
--- a/include/configs/DB64360.h
+++ b/include/configs/DB64360.h
@@ -105,6 +105,7 @@
/* first ethernet */
#define CONFIG_ETHADDR 64:36:00:00:00:01
/* next two ethernet hwaddrs */
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 64:36:00:00:00:02
/* in the atlantis 64360 we have only 2 ETH port on the board,
if we use PCI it has its own MAC addr */
diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h
index e58b63a..fb02481 100644
--- a/include/configs/DB64460.h
+++ b/include/configs/DB64460.h
@@ -43,7 +43,9 @@
#define __LOCAL_H
#define CONFIG_ETHADDR 64:46:00:00:00:01
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 64:46:00:00:00:02
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 64:46:00:00:00:03
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index df4ed39..af96c7c 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -164,6 +164,7 @@
/* adding Ethernet setting: FTS OUI 00:11:0B */
/*----------------------------------------------------------------------------*/
#define CONFIG_ETHADDR 00:11:0B:00:00:01
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:11:0B:00:00:02
#define CONFIG_IPADDR 10.48.8.178
#define CONFIG_IP1ADDR 10.48.8.188
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index 57212e0..2d7cf2f 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -126,6 +126,7 @@
/* Ethernet stuff */
#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
#define CONFIG_ETHADDR 00:50:C2:1E:AF:FE
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:50:C2:1E:AF:FD
/*-----------------------------------------------------------------------
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
index 9ec1c08..8aa18ca 100644
--- a/include/configs/ISPAN.h
+++ b/include/configs/ISPAN.h
@@ -177,8 +177,10 @@
/* Environment is in flash, there is little space left in Serial EEPROM */
#define CFG_ENV_IS_IN_FLASH
#define CFG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */
+#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
/*-----------------------------------------------------------------------
* Hard Reset Configuration Words
diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h
index 17402f0..91011be 100644
--- a/include/configs/LANTEC.h
+++ b/include/configs/LANTEC.h
@@ -90,6 +90,7 @@
& ~CFG_CMD_DTT \
& ~CFG_CMD_EEPROM \
& ~CFG_CMD_ELF \
+ & ~CFG_CMD_EXT2 \
& ~CFG_CMD_FDC \
& ~CFG_CMD_FDOS \
& ~CFG_CMD_HWFLOW \
@@ -106,6 +107,7 @@
& ~CFG_CMD_REISER \
& ~CFG_CMD_SCSI \
& ~CFG_CMD_SPI \
+ & ~CFG_CMD_UNIVERSE\
& ~CFG_CMD_USB \
& ~CFG_CMD_VFD \
& ~CFG_CMD_XIMG )
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 0d5b05a..6b7bdda 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -185,6 +185,7 @@
CFG_CMD_DTT | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
+ CFG_CMD_EXT2 | \
CFG_CMD_FAT | \
CFG_CMD_FDC | \
CFG_CMD_FDOS | \
@@ -198,6 +199,7 @@
CFG_CMD_REISER | \
CFG_CMD_SCSI | \
CFG_CMD_SPI | \
+ CFG_CMD_UNIVERSE | \
CFG_CMD_USB | \
CFG_CMD_VFD | \
CFG_CMD_XIMG
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index a4018f8..88efd95 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -155,6 +155,7 @@
CFG_CMD_DTT | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
+ CFG_CMD_EXT2 | \
CFG_CMD_FDC | \
CFG_CMD_FDOS | \
CFG_CMD_HWFLOW | \
@@ -168,6 +169,7 @@
CFG_CMD_SCSI | \
CFG_CMD_SPI | \
CFG_CMD_VFD | \
+ CFG_CMD_UNIVERSE | \
CFG_CMD_USB | \
CFG_CMD_XIMG ) )
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index a53b963..874e962 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -458,7 +458,9 @@
/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
#endif
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 9824241..d4cba33 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -415,7 +415,9 @@
/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
#endif
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 6b4191e..49518d8 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -415,7 +415,9 @@
/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
#endif
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 2a31dd7..d58e6a7 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -504,7 +504,9 @@
/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
#endif
diff --git a/include/configs/OCOTEA.h b/include/configs/OCOTEA.h
index 6f8fd1d..f69ab1b 100644
--- a/include/configs/OCOTEA.h
+++ b/include/configs/OCOTEA.h
@@ -154,8 +154,11 @@
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 10.1.2.3
#define CONFIG_ETHADDR 00:04:AC:E3:28:8A
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:04:AC:E3:28:8B
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:04:AC:E3:28:8C
+#define CONFIG_HAS_ETH3
#define CONFIG_ETH3ADDR 00:04:AC:E3:28:8D
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_SERVERIP 10.1.2.2
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index c58e990..5f748a0 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -102,6 +102,8 @@
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() on init */
+#define CONFIG_HAS_ETH1 1 /* add support for eth1addr */
+
#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */
/*
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 03020f2..2ffe89f 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -92,6 +92,7 @@
/* Ethernet stuff */
#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
#define CONFIG_ETHADDR 00:50:c2:1e:af:fe
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:50:c2:1e:af:fd
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
index 3592290..4623dbb 100644
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -98,6 +98,7 @@
~CFG_CMD_BSP & \
~CFG_CMD_DATE & \
~CFG_CMD_DTT & \
+ ~CFG_CMD_EXT2 & \
~CFG_CMD_FDC & \
~CFG_CMD_FDOS & \
~CFG_CMD_HWFLOW & \
@@ -113,6 +114,7 @@
~CFG_CMD_SCSI & \
~CFG_CMD_SETGETDCR & \
~CFG_CMD_SPI & \
+ ~CFG_CMD_UNIVERSE & \
~CFG_CMD_USB & \
~CFG_CMD_VFD & \
~CFG_CMD_XIMG )
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 3a09de9..60561eb 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -400,9 +400,11 @@
/*Note: change below for your network setting!!! */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
- #define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a
- #define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b
- #define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c
+# define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a
+# define CONFIG_HAS_ETH1
+# define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b
+# define CONFIG_HAS_ETH2
+# define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c
#endif
#define CONFIG_SERVERIP YourServerIP
diff --git a/include/configs/SBC8560.h b/include/configs/SBC8560.h
index 8e3c392..6bd0abe 100644
--- a/include/configs/SBC8560.h
+++ b/include/configs/SBC8560.h
@@ -388,9 +388,11 @@
/*Note: change below for your network setting!!! */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
- #define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a
- #define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b
- #define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c
+# define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a
+# define CONFIG_HAS_ETH1
+# define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b
+# define CONFIG_HAS_ETH2
+# define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c
#endif
#define CONFIG_SERVERIP YourServerIP
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index d6fa798..195c036 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -81,6 +81,8 @@
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
+#define CONFIG_HAS_ETH1
+
/*-----------------------------------------------------------------------
* Definitions for status LED
*/
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 3cc4ff4..0235700 100644
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -177,6 +177,10 @@
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */
+#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */
+
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_PCI | \
CFG_CMD_IRQ | \
@@ -186,7 +190,7 @@
CFG_CMD_EEPROM | \
CFG_CMD_PING | \
CFG_CMD_ELF | \
- CFG_CMD_MII | \
+ CFG_CMD_MII | \
CFG_CMD_DIAG | \
CFG_CMD_FAT )
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index a17d035..1f9de35 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -277,6 +277,7 @@
CFG_CMD_DOC | \
CFG_CMD_DTT | \
CFG_CMD_EEPROM | \
+ CFG_CMD_EXT2 | \
CFG_CMD_FDC | \
CFG_CMD_FDOS | \
CFG_CMD_HWFLOW | \
@@ -291,6 +292,7 @@
CFG_CMD_REISER | \
CFG_CMD_SCSI | \
CFG_CMD_SPI | \
+ CFG_CMD_UNIVERSE| \
CFG_CMD_USB | \
CFG_CMD_VFD | \
CFG_CMD_XIMG ) )
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 6f19909..90d6b25 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -177,6 +177,7 @@
CFG_CMD_BEDBUG | \
CFG_CMD_BMP | \
CFG_CMD_DOC | \
+ CFG_CMD_EXT2 | \
CFG_CMD_FDC | \
CFG_CMD_FDOS | \
CFG_CMD_FPGA | \
@@ -191,6 +192,7 @@
CFG_CMD_REISER | \
CFG_CMD_SCSI | \
CFG_CMD_SPI | \
+ CFG_CMD_UNIVERSE| \
CFG_CMD_VFD | \
CFG_CMD_XIMG ) )
diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index d36e3c7..abad059 100644
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -58,7 +58,7 @@
#define CONFIG_SYSTEMACE 1
#define CONFIG_DOS_PARTITION 1
-#define CFG_SYSTEMACE_BASE XPAR_SYSACE_0_BASEADDR
+#define CFG_SYSTEMACE_BASE XPAR_OPB_SYSACE_0_BASEADDR
#define CFG_SYSTEMACE_WIDTH XPAR_XSYSACE_MEM_WIDTH
#define CFG_ENV_IS_IN_EEPROM 1 /* environment is in EEPROM */
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
index d0ee729..9140efb 100644
--- a/include/configs/quantum.h
+++ b/include/configs/quantum.h
@@ -199,7 +199,8 @@
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x00F40000 /* Offset of Environment Sector absolute address 0xfff40000*/
-#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
/* Address and size of Redundant Environment Sector */
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index cf5ef63..8cf9eeb 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -382,9 +382,11 @@
/*Note: change below for your network setting!!! */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
- #define CONFIG_ETHADDR 00:01:af:07:9b:8a
- #define CONFIG_ETH1ADDR 00:01:af:07:9b:8b
- #define CONFIG_ETH2ADDR 00:01:af:07:9b:8c
+# define CONFIG_ETHADDR 00:01:af:07:9b:8a
+# define CONFIG_HAS_ETH1
+# define CONFIG_ETH1ADDR 00:01:af:07:9b:8b
+# define CONFIG_HAS_ETH2
+# define CONFIG_ETH2ADDR 00:01:af:07:9b:8c
#endif
#define CONFIG_SERVERIP 192.168.0.131
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index f5b4836..e9261db 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -368,8 +368,10 @@
/*Note: change below for your network setting!!! */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a
+#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:e0:0c:07:9b:8c
#endif