driver/ddr/fsl: Add sync of refresh
Add sync of refresh for multiple DDR controllers. DDRC initialization
needs to complete first. Code is re-ordered to keep refresh close.
Signed-off-by: York Sun <yorksun@freescale.com>
diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c
index ad569de..664081b 100644
--- a/drivers/ddr/fsl/util.c
+++ b/drivers/ddr/fsl/util.c
@@ -308,3 +308,58 @@
{
detail_board_ddr_info();
}
+
+#ifdef CONFIG_FSL_DDR_SYNC_REFRESH
+#define DDRC_DEBUG20_INIT_DONE 0x80000000
+#define DDRC_DEBUG2_RF 0x00000040
+void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl,
+ unsigned int last_ctrl)
+{
+ unsigned int i;
+ u32 ddrc_debug20;
+ u32 ddrc_debug2[CONFIG_NUM_DDR_CONTROLLERS] = {};
+ u32 *ddrc_debug2_p[CONFIG_NUM_DDR_CONTROLLERS] = {};
+ struct ccsr_ddr __iomem *ddr;
+
+ for (i = first_ctrl; i <= last_ctrl; i++) {
+ switch (i) {
+ case 0:
+ ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+ break;
+#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+ case 1:
+ ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
+ break;
+#endif
+#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+ case 2:
+ ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
+ break;
+#endif
+#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+ case 3:
+ ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
+ break;
+#endif
+ default:
+ printf("%s unexpected ctrl = %u\n", __func__, i);
+ return;
+ }
+ ddrc_debug20 = ddr_in32(&ddr->debug[19]);
+ ddrc_debug2_p[i] = &ddr->debug[1];
+ while (!(ddrc_debug20 & DDRC_DEBUG20_INIT_DONE)) {
+ /* keep polling until DDRC init is done */
+ udelay(100);
+ ddrc_debug20 = ddr_in32(&ddr->debug[19]);
+ }
+ ddrc_debug2[i] = ddr_in32(&ddr->debug[1]) | DDRC_DEBUG2_RF;
+ }
+ /*
+ * Sync refresh
+ * This is put together to make sure the refresh reqeusts are sent
+ * closely to each other.
+ */
+ for (i = first_ctrl; i <= last_ctrl; i++)
+ ddr_out32(ddrc_debug2_p[i], ddrc_debug2[i]);
+}
+#endif /* CONFIG_FSL_DDR_SYNC_REFRESH */