sunxi: musb: Support checking VBUS using AXP221 PMIC
This enables the musb glue layer to use the AXP221's VBUS detection
function to check for VBUS. This fixes otg support on the A23 q8h
tablets.
Note that u-boot never calls musb_shutdown(), so once VBUS is enabled,
it is never disabled until the system is powered off, or the OS does
so. This can be used to our advantage to keep VBUS powered into the
OS, where support for AXP221 is not available yet.
Fixes: 52defe8f6570 ("sunxi: musb: Check Vbus-det before enabling otg port power")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index fe45db1..4d8c15a 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -27,6 +27,15 @@
#include <asm-generic/gpio.h>
#include "linux-compat.h"
#include "musb_core.h"
+#ifdef CONFIG_AXP152_POWER
+#include <axp152.h>
+#endif
+#ifdef CONFIG_AXP209_POWER
+#include <axp209.h>
+#endif
+#ifdef CONFIG_AXP221_POWER
+#include <axp221.h>
+#endif
/******************************************************************************
******************************************************************************
@@ -228,29 +237,44 @@
if (is_host_enabled(musb)) {
int vbus_det = sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
- if (vbus_det == -1) {
- eprintf("Error invalid Vusb-det pin\n");
- return -EINVAL;
- }
- err = gpio_request(vbus_det, "vbus0_det");
- if (err)
- return err;
+#ifdef AXP_VBUS_DETECT
+ if (!strcmp(CONFIG_USB0_VBUS_DET, "axp_vbus_detect")) {
+ err = axp_get_vbus();
+ if (err < 0)
+ return err;
+ } else {
+#endif
+ if (vbus_det == -1) {
+ eprintf("Error invalid Vusb-det pin\n");
+ return -EINVAL;
+ }
- err = gpio_direction_input(vbus_det);
- if (err) {
+ err = gpio_request(vbus_det, "vbus0_det");
+ if (err)
+ return err;
+
+ err = gpio_direction_input(vbus_det);
+ if (err) {
+ gpio_free(vbus_det);
+ return err;
+ }
+
+ err = gpio_get_value(vbus_det);
+ if (err) {
+ gpio_free(vbus_det);
+ return -EIO;
+ }
+
gpio_free(vbus_det);
- return err;
+#ifdef AXP_VBUS_DETECT
}
+#endif
- err = gpio_get_value(vbus_det);
if (err) {
eprintf("Error: A charger is plugged into the OTG\n");
- gpio_free(vbus_det);
return -EIO;
}
-
- gpio_free(vbus_det);
}
err = sunxi_usbc_request_resources(0);