mgcoge: update board configuration
add support for the config Flash.
initialize the UPIOx controller.
Signed-off-by: Heiko Schocher <hs@denx.de>
diff --git a/board/mgcoge/mgcoge.c b/board/mgcoge/mgcoge.c
index 0207a3a..e7c3fa0 100644
--- a/board/mgcoge/mgcoge.c
+++ b/board/mgcoge/mgcoge.c
@@ -278,6 +278,17 @@
return 0;
}
+/*
+ * Early board initalization.
+ */
+int board_early_init_r(void)
+{
+ /* setup the UPIOx */
+ *(char *)(CFG_PIGGY_BASE + 0x02) = 0xc0;
+ *(char *)(CFG_PIGGY_BASE + 0x03) = 0x15;
+ return 0;
+}
+
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
/*
* update "memory" property in the blob
@@ -286,7 +297,7 @@
{
int ret, nodeoffset = 0;
ulong memory_data[2] = {0};
- ulong flash_data[4] = {0};
+ ulong flash_data[8] = {0};
memory_data[0] = cpu_to_be32(bd->bi_memstart);
memory_data[1] = cpu_to_be32(bd->bi_memsize);
@@ -304,9 +315,13 @@
printf("ft_blob_update(): cannot find /memory node "
"err:%s\n", fdt_strerror(nodeoffset));
}
- /* update Flash size */
- flash_data[2] = cpu_to_be32(bd->bi_flashstart);
- flash_data[3] = cpu_to_be32(bd->bi_flashsize);
+ /* update Flash addr, size */
+ flash_data[2] = cpu_to_be32(CFG_FLASH_BASE);
+ flash_data[3] = cpu_to_be32(CFG_FLASH_SIZE);
+ flash_data[4] = cpu_to_be32(1);
+ flash_data[5] = cpu_to_be32(0);
+ flash_data[6] = cpu_to_be32(CFG_FLASH_BASE_1);
+ flash_data[7] = cpu_to_be32(CFG_FLASH_SIZE_1);
nodeoffset = fdt_path_offset (blob, "/localbus");
if (nodeoffset >= 0) {
ret = fdt_setprop(blob, nodeoffset, "ranges", flash_data,
@@ -331,7 +346,7 @@
}
else {
/* memory node is required in dts */
- printf("ft_blob_update(): cannot find /localbus node "
+ printf("ft_blob_update(): cannot find /soc/cpm/ethernet node "
"err:%s\n", fdt_strerror(nodeoffset));
}
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index f4a1cc0..98facf2 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -35,6 +35,9 @@
#define CONFIG_CPM2 1 /* Has a CPM2 */
+/* Do boardspecific init */
+#define CONFIG_BOARD_EARLY_INIT_R 1
+
/*
* Select serial console configuration
*
@@ -152,8 +155,13 @@
#define CFG_FLASH_SIZE 32
#define CFG_FLASH_CFI
#define CFG_FLASH_CFI_DRIVER
-#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
-#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */
+#define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks */
+#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
+
+#define CFG_FLASH_BASE_1 0x50000000
+#define CFG_FLASH_SIZE_1 64
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE_1 }
#define CFG_MONITOR_BASE TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
@@ -246,6 +254,8 @@
* ---- --- ------- ------ ------
* 0 60x GPCM 8 bit FLASH
* 1 60x SDRAM 32 bit SDRAM
+ * 3 60x GPCM 8 bit GPIO/PIGGY
+ * 5 60x GPCM 16 bit CFG-Flash
*
*/
/* Bank 0 - FLASH
@@ -301,6 +311,27 @@
PSDMR_WRC_1C |\
PSDMR_CL_2)
+/* GPIO/PIGGY on CS3 initialization values
+*/
+#define CFG_PIGGY_BASE 0x30000000
+#define CFG_PIGGY_SIZE 128
+
+#define CFG_BR3_PRELIM ((CFG_PIGGY_BASE & BRx_BA_MSK) |\
+ BRx_PS_8 | BRx_MS_GPCM_P | BRx_V)
+
+#define CFG_OR3_PRELIM (MEG_TO_AM(CFG_PIGGY_SIZE) |\
+ ORxG_CSNT | ORxG_ACS_DIV2 |\
+ ORxG_SCY_3_CLK | ORxG_TRLX )
+
+/* CFG-Flash on CS5 initialization values
+*/
+#define CFG_BR5_PRELIM ((CFG_FLASH_BASE_1 & BRx_BA_MSK) |\
+ BRx_PS_16 | BRx_MS_GPCM_P | BRx_V)
+
+#define CFG_OR5_PRELIM (MEG_TO_AM(CFG_FLASH_SIZE_1) |\
+ ORxG_CSNT | ORxG_ACS_DIV2 |\
+ ORxG_SCY_5_CLK | ORxG_TRLX )
+
#define CFG_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
/* pass open firmware flat tree */