mgcoge: update board configuration
add support for the config Flash.
initialize the UPIOx controller.
Signed-off-by: Heiko Schocher <hs@denx.de>
diff --git a/board/mgcoge/mgcoge.c b/board/mgcoge/mgcoge.c
index 0207a3a..e7c3fa0 100644
--- a/board/mgcoge/mgcoge.c
+++ b/board/mgcoge/mgcoge.c
@@ -278,6 +278,17 @@
return 0;
}
+/*
+ * Early board initalization.
+ */
+int board_early_init_r(void)
+{
+ /* setup the UPIOx */
+ *(char *)(CFG_PIGGY_BASE + 0x02) = 0xc0;
+ *(char *)(CFG_PIGGY_BASE + 0x03) = 0x15;
+ return 0;
+}
+
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
/*
* update "memory" property in the blob
@@ -286,7 +297,7 @@
{
int ret, nodeoffset = 0;
ulong memory_data[2] = {0};
- ulong flash_data[4] = {0};
+ ulong flash_data[8] = {0};
memory_data[0] = cpu_to_be32(bd->bi_memstart);
memory_data[1] = cpu_to_be32(bd->bi_memsize);
@@ -304,9 +315,13 @@
printf("ft_blob_update(): cannot find /memory node "
"err:%s\n", fdt_strerror(nodeoffset));
}
- /* update Flash size */
- flash_data[2] = cpu_to_be32(bd->bi_flashstart);
- flash_data[3] = cpu_to_be32(bd->bi_flashsize);
+ /* update Flash addr, size */
+ flash_data[2] = cpu_to_be32(CFG_FLASH_BASE);
+ flash_data[3] = cpu_to_be32(CFG_FLASH_SIZE);
+ flash_data[4] = cpu_to_be32(1);
+ flash_data[5] = cpu_to_be32(0);
+ flash_data[6] = cpu_to_be32(CFG_FLASH_BASE_1);
+ flash_data[7] = cpu_to_be32(CFG_FLASH_SIZE_1);
nodeoffset = fdt_path_offset (blob, "/localbus");
if (nodeoffset >= 0) {
ret = fdt_setprop(blob, nodeoffset, "ranges", flash_data,
@@ -331,7 +346,7 @@
}
else {
/* memory node is required in dts */
- printf("ft_blob_update(): cannot find /localbus node "
+ printf("ft_blob_update(): cannot find /soc/cpm/ethernet node "
"err:%s\n", fdt_strerror(nodeoffset));
}