arm: dts: k3-am65: Sync Linux v5.11-rc6 dts into U-Boot
Sync all AM65 related v5.11-rc6 Linux kernel dts into U-Boot.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi
index a7b03dc..cabdba8 100644
--- a/arch/arm/dts/k3-am65-main.dtsi
+++ b/arch/arm/dts/k3-am65-main.dtsi
@@ -2,13 +2,31 @@
/*
* Device Tree Source for AM6 SoC Family Main Domain peripherals
*
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
*/
-
#include <dt-bindings/phy/phy-am654-serdes.h>
-#include <dt-bindings/phy/phy.h>
&cbass_main {
+ msmc_ram: sram@70000000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x70000000 0x0 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x70000000 0x200000>;
+
+ atf-sram@0 {
+ reg = <0x0 0x20000>;
+ };
+
+ sysfw-sram@f0000 {
+ reg = <0xf0000 0x10000>;
+ };
+
+ l3cache-sram@100000 {
+ reg = <0x100000 0x100000>;
+ };
+ };
+
gic500: interrupt-controller@1800000 {
compatible = "arm,gic-v3";
#address-cells = <2>;
@@ -24,23 +42,43 @@
*/
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
- gic_its: gic-its@18200000 {
+ gic_its: msi-controller@1820000 {
compatible = "arm,gic-v3-its";
reg = <0x00 0x01820000 0x00 0x10000>;
+ socionext,synquacer-pre-its = <0x1000000 0x400000>;
msi-controller;
#msi-cells = <1>;
};
};
- secure_proxy_main: mailbox@32c00000 {
- compatible = "ti,am654-secure-proxy";
- #mbox-cells = <1>;
- reg-names = "target_data", "rt", "scfg";
- reg = <0x00 0x32c00000 0x00 0x100000>,
- <0x00 0x32400000 0x00 0x100000>,
- <0x00 0x32800000 0x00 0x100000>;
- interrupt-names = "rx_011";
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ serdes0: serdes@900000 {
+ compatible = "ti,phy-am654-serdes";
+ reg = <0x0 0x900000 0x0 0x2000>;
+ reg-names = "serdes";
+ #phy-cells = <2>;
+ power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>;
+ clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
+ assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+ assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+ ti,serdes-clk = <&serdes0_clk>;
+ #clock-cells = <1>;
+ mux-controls = <&serdes_mux 0>;
+ };
+
+ serdes1: serdes@910000 {
+ compatible = "ti,phy-am654-serdes";
+ reg = <0x0 0x910000 0x0 0x2000>;
+ reg-names = "serdes";
+ #phy-cells = <2>;
+ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>;
+ clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk";
+ assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>;
+ assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>;
+ ti,serdes-clk = <&serdes1_clk>;
+ #clock-cells = <1>;
+ mux-controls = <&serdes_mux 1>;
};
main_uart0: serial@2800000 {
@@ -51,6 +89,7 @@
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
+ power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
};
main_uart1: serial@2810000 {
@@ -60,7 +99,7 @@
reg-io-width = <4>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
+ power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
};
main_uart2: serial@2820000 {
@@ -70,10 +109,31 @@
reg-io-width = <4>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
+ power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
};
- main_pmx0: pinmux@11c000 {
+ crypto: crypto@4e00000 {
+ compatible = "ti,am654-sa2ul";
+ reg = <0x0 0x4e00000 0x0 0x1200>;
+ power-domains = <&k3_pds 136 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
+
+ dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
+ <&main_udmap 0x4001>;
+ dma-names = "tx", "rx1", "rx2";
+ dma-coherent;
+
+ rng: rng@4e10000 {
+ compatible = "inside-secure,safexcel-eip76";
+ reg = <0x0 0x4e10000 0x0 0x7d>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 136 1>;
+ };
+ };
+
+ main_pmx0: pinctrl@11c000 {
compatible = "pinctrl-single";
reg = <0x0 0x11c000 0x0 0x2e4>;
#pinctrl-cells = <1>;
@@ -81,7 +141,7 @@
pinctrl-single,function-mask = <0xffffffff>;
};
- main_pmx1: pinmux@11c2e8 {
+ main_pmx1: pinctrl@11c2e8 {
compatible = "pinctrl-single";
reg = <0x0 0x11c2e8 0x0 0x24>;
#pinctrl-cells = <1>;
@@ -89,6 +149,113 @@
pinctrl-single,function-mask = <0xffffffff>;
};
+ main_i2c0: i2c@2000000 {
+ compatible = "ti,am654-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2000000 0x0 0x100>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 110 1>;
+ power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c1: i2c@2010000 {
+ compatible = "ti,am654-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2010000 0x0 0x100>;
+ interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 111 1>;
+ power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c2: i2c@2020000 {
+ compatible = "ti,am654-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2020000 0x0 0x100>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 112 1>;
+ power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c3: i2c@2030000 {
+ compatible = "ti,am654-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2030000 0x0 0x100>;
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 113 1>;
+ power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ ecap0: pwm@3100000 {
+ compatible = "ti,am654-ecap", "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x0 0x03100000 0x0 0x60>;
+ power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 39 0>;
+ clock-names = "fck";
+ };
+
+ main_spi0: spi@2100000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x0 0x2100000 0x0 0x400>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 137 1>;
+ power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+ dma-names = "tx0", "rx0";
+ };
+
+ main_spi1: spi@2110000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x0 0x2110000 0x0 0x400>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 138 1>;
+ power-domains = <&k3_pds 138 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ assigned-clocks = <&k3_clks 137 1>;
+ assigned-clock-rates = <48000000>;
+ };
+
+ main_spi2: spi@2120000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x0 0x2120000 0x0 0x400>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 139 1>;
+ power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ main_spi3: spi@2130000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x0 0x2130000 0x0 0x400>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 140 1>;
+ power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ main_spi4: spi@2140000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x0 0x2140000 0x0 0x400>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 141 1>;
+ power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
sdhci0: sdhci@4f80000 {
compatible = "ti,am654-sdhci-5.1";
reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
@@ -144,64 +311,13 @@
dma-coherent;
};
- main_i2c0: i2c@2000000 {
- compatible = "ti,am654-i2c", "ti,omap4-i2c";
- reg = <0x0 0x2000000 0x0 0x100>;
- interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "fck";
- clocks = <&k3_clks 110 1>;
- power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
- };
-
- main_i2c1: i2c@2010000 {
- compatible = "ti,am654-i2c", "ti,omap4-i2c";
- reg = <0x0 0x2010000 0x0 0x100>;
- interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "fck";
- clocks = <&k3_clks 111 1>;
- power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
- };
-
- main_i2c2: i2c@2020000 {
- compatible = "ti,am654-i2c", "ti,omap4-i2c";
- reg = <0x0 0x2020000 0x0 0x100>;
- interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "fck";
- clocks = <&k3_clks 112 1>;
- power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
- };
-
- main_i2c3: i2c@2030000 {
- compatible = "ti,am654-i2c", "ti,omap4-i2c";
- reg = <0x0 0x2030000 0x0 0x100>;
- interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "fck";
- clocks = <&k3_clks 113 1>;
- power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
- };
-
- scm_conf: scm_conf@100000 {
+ scm_conf: scm-conf@100000 {
compatible = "syscon", "simple-mfd";
reg = <0 0x00100000 0 0x1c000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x00100000 0x1c000>;
- serdes_mux: mux-controller {
- compatible = "mmio-mux";
- #mux-control-cells = <1>;
- mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
- <0x4090 0x3>; /* SERDES1 lane select */
- };
-
pcie0_mode: pcie-mode@4060 {
compatible = "syscon";
reg = <0x00004060 0x4>;
@@ -212,84 +328,37 @@
reg = <0x00004070 0x4>;
};
- serdes0_clk: serdes_clk@4080 {
- compatible = "syscon";
- reg = <0x00004080 0x4>;
- };
-
- serdes1_clk: serdes_clk@4090 {
- compatible = "syscon";
- reg = <0x00004090 0x4>;
- };
-
pcie_devid: pcie-devid@210 {
compatible = "syscon";
reg = <0x00000210 0x4>;
};
- };
- serdes0: serdes@900000 {
- compatible = "ti,phy-am654-serdes";
- reg = <0x0 0x900000 0x0 0x2000>;
- reg-names = "serdes";
- #phy-cells = <2>;
- power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>;
- clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
- assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
- assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
- ti,serdes-clk = <&serdes0_clk>;
- mux-controls = <&serdes_mux 0>;
- #clock-cells = <1>;
- };
+ serdes0_clk: clock@4080 {
+ compatible = "syscon";
+ reg = <0x00004080 0x4>;
+ };
- serdes1: serdes@910000 {
- compatible = "ti,phy-am654-serdes";
- reg = <0x0 0x910000 0x0 0x2000>;
- reg-names = "serdes";
- #phy-cells = <2>;
- power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>;
- clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk";
- assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>;
- assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>;
- ti,serdes-clk = <&serdes1_clk>;
- mux-controls = <&serdes_mux 1>;
- #clock-cells = <1>;
- };
+ serdes1_clk: clock@4090 {
+ compatible = "syscon";
+ reg = <0x00004090 0x4>;
+ };
- pcie0_rc: pcie@5500000 {
- compatible = "ti,am654-pcie-rc";
- reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
- reg-names = "app", "dbics", "config", "atu";
- power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000
- 0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
- ti,syscon-pcie-id = <&pcie_devid>;
- ti,syscon-pcie-mode = <&pcie0_mode>;
- bus-range = <0x0 0xff>;
- status = "disabled";
- device_type = "pci";
- num-lanes = <1>;
- num-ob-windows = <16>;
- num-viewport = <16>;
- max-link-speed = <3>;
- interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie0_intc 0>, /* INT A */
- <0 0 0 2 &pcie0_intc 0>, /* INT B */
- <0 0 0 3 &pcie0_intc 0>, /* INT C */
- <0 0 0 4 &pcie0_intc 0>; /* INT D */
- msi-map = <0x0 &gic_its 0x0 0x10000>;
+ serdes_mux: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
+ <0x4090 0x3>; /* SERDES1 lane select */
+ };
- pcie0_intc: legacy-interrupt-controller@1 {
- interrupt-controller;
- #interrupt-cells = <1>;
- interrupt-parent = <&gic500>;
- interrupts = <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
+ dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
+ compatible = "syscon";
+ reg = <0x0000041e0 0x14>;
+ };
+
+ ehrpwm_tbclk: clock@4140 {
+ compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+ reg = <0x4140 0x18>;
+ #clock-cells = <1>;
};
};
@@ -302,6 +371,7 @@
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
dma-coherent;
power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
<&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
@@ -330,7 +400,6 @@
clocks = <&k3_clks 151 0>, <&k3_clks 151 1>;
clock-names = "wkupclk", "refclk";
#phy-cells = <0>;
- ti,dis-chg-det-quirk;
};
dwc3_1: dwc3@4020000 {
@@ -342,6 +411,7 @@
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
dma-coherent;
power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 152 2>;
assigned-clocks = <&k3_clks 152 2>;
assigned-clock-parents = <&k3_clks 152 4>; /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
@@ -368,6 +438,492 @@
clocks = <&k3_clks 152 0>, <&k3_clks 152 1>;
clock-names = "wkupclk", "refclk";
#phy-cells = <0>;
- ti,dis-chg-det-quirk;
+ };
+
+ intr_main_gpio: interrupt-controller0 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <1>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <100>;
+ ti,interrupt-ranges = <0 392 32>;
+ };
+
+ main-navss {
+ compatible = "simple-mfd";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ dma-coherent;
+ dma-ranges;
+
+ ti,sci-dev-id = <118>;
+
+ intr_main_navss: interrupt-controller1 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <4>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <1>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <182>;
+ ti,interrupt-ranges = <0 64 64>,
+ <64 448 64>;
+ };
+
+ inta_main_udmass: interrupt-controller@33d00000 {
+ compatible = "ti,sci-inta";
+ reg = <0x0 0x33d00000 0x0 0x100000>;
+ interrupt-controller;
+ interrupt-parent = <&intr_main_navss>;
+ msi-controller;
+ #interrupt-cells = <0>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <179>;
+ ti,interrupt-ranges = <0 0 256>;
+ };
+
+ secure_proxy_main: mailbox@32c00000 {
+ compatible = "ti,am654-secure-proxy";
+ #mbox-cells = <1>;
+ reg-names = "target_data", "rt", "scfg";
+ reg = <0x00 0x32c00000 0x00 0x100000>,
+ <0x00 0x32400000 0x00 0x100000>,
+ <0x00 0x32800000 0x00 0x100000>;
+ interrupt-names = "rx_011";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ hwspinlock: spinlock@30e00000 {
+ compatible = "ti,am654-hwspinlock";
+ reg = <0x00 0x30e00000 0x00 0x1000>;
+ #hwlock-cells = <1>;
+ };
+
+ mailbox0_cluster0: mailbox@31f80000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f80000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&intr_main_navss>;
+ };
+
+ mailbox0_cluster1: mailbox@31f81000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f81000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&intr_main_navss>;
+ };
+
+ mailbox0_cluster2: mailbox@31f82000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f82000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&intr_main_navss>;
+ };
+
+ mailbox0_cluster3: mailbox@31f83000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f83000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&intr_main_navss>;
+ };
+
+ mailbox0_cluster4: mailbox@31f84000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f84000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&intr_main_navss>;
+ };
+
+ mailbox0_cluster5: mailbox@31f85000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f85000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&intr_main_navss>;
+ };
+
+ mailbox0_cluster6: mailbox@31f86000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f86000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&intr_main_navss>;
+ };
+
+ mailbox0_cluster7: mailbox@31f87000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f87000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&intr_main_navss>;
+ };
+
+ mailbox0_cluster8: mailbox@31f88000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f88000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&intr_main_navss>;
+ };
+
+ mailbox0_cluster9: mailbox@31f89000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f89000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&intr_main_navss>;
+ };
+
+ mailbox0_cluster10: mailbox@31f8a000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f8a000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&intr_main_navss>;
+ };
+
+ mailbox0_cluster11: mailbox@31f8b000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f8b000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&intr_main_navss>;
+ };
+
+ ringacc: ringacc@3c000000 {
+ compatible = "ti,am654-navss-ringacc";
+ reg = <0x0 0x3c000000 0x0 0x400000>,
+ <0x0 0x38000000 0x0 0x400000>,
+ <0x0 0x31120000 0x0 0x100>,
+ <0x0 0x33000000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ ti,num-rings = <818>;
+ ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <187>;
+ msi-parent = <&inta_main_udmass>;
+ };
+
+ main_udmap: dma-controller@31150000 {
+ compatible = "ti,am654-navss-main-udmap";
+ reg = <0x0 0x31150000 0x0 0x100>,
+ <0x0 0x34000000 0x0 0x100000>,
+ <0x0 0x35000000 0x0 0x100000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt";
+ msi-parent = <&inta_main_udmass>;
+ #dma-cells = <1>;
+
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <188>;
+ ti,ringacc = <&ringacc>;
+
+ ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
+ <0xd>; /* TX_CHAN */
+ ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
+ <0xa>; /* RX_CHAN */
+ ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
+ };
+
+ cpts@310d0000 {
+ compatible = "ti,am65-cpts";
+ reg = <0x0 0x310d0000 0x0 0x400>;
+ reg-names = "cpts";
+ clocks = <&main_cpts_mux>;
+ clock-names = "cpts";
+ interrupts-extended = <&intr_main_navss 391>;
+ interrupt-names = "cpts";
+ ti,cpts-periodic-outputs = <6>;
+ ti,cpts-ext-ts-inputs = <8>;
+
+ main_cpts_mux: refclk-mux {
+ #clock-cells = <0>;
+ clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
+ <&k3_clks 118 6>, <&k3_clks 118 3>,
+ <&k3_clks 118 8>, <&k3_clks 118 14>,
+ <&k3_clks 120 3>, <&k3_clks 121 3>;
+ assigned-clocks = <&main_cpts_mux>;
+ assigned-clock-parents = <&k3_clks 118 5>;
+ };
+ };
+ };
+
+ main_gpio0: gpio@600000 {
+ compatible = "ti,am654-gpio", "ti,keystone-gpio";
+ reg = <0x0 0x600000 0x0 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&intr_main_gpio>;
+ interrupts = <192>, <193>, <194>, <195>, <196>, <197>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <96>;
+ ti,davinci-gpio-unbanked = <0>;
+ clocks = <&k3_clks 57 0>;
+ clock-names = "gpio";
+ };
+
+ main_gpio1: gpio@601000 {
+ compatible = "ti,am654-gpio", "ti,keystone-gpio";
+ reg = <0x0 0x601000 0x0 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&intr_main_gpio>;
+ interrupts = <200>, <201>, <202>, <203>, <204>, <205>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <90>;
+ ti,davinci-gpio-unbanked = <0>;
+ clocks = <&k3_clks 58 0>;
+ clock-names = "gpio";
+ };
+
+ pcie0_rc: pcie@5500000 {
+ compatible = "ti,am654-pcie-rc";
+ reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
+ reg-names = "app", "dbics", "config", "atu";
+ power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000
+ 0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
+ ti,syscon-pcie-id = <&pcie_devid>;
+ ti,syscon-pcie-mode = <&pcie0_mode>;
+ bus-range = <0x0 0xff>;
+ num-viewport = <16>;
+ max-link-speed = <2>;
+ dma-coherent;
+ interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+ msi-map = <0x0 &gic_its 0x0 0x10000>;
+ };
+
+ pcie0_ep: pcie-ep@5500000 {
+ compatible = "ti,am654-pcie-ep";
+ reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
+ reg-names = "app", "dbics", "addr_space", "atu";
+ power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+ ti,syscon-pcie-mode = <&pcie0_mode>;
+ num-ib-windows = <16>;
+ num-ob-windows = <16>;
+ max-link-speed = <2>;
+ dma-coherent;
+ interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pcie1_rc: pcie@5600000 {
+ compatible = "ti,am654-pcie-rc";
+ reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
+ reg-names = "app", "dbics", "config", "atu";
+ power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000
+ 0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>;
+ ti,syscon-pcie-id = <&pcie_devid>;
+ ti,syscon-pcie-mode = <&pcie1_mode>;
+ bus-range = <0x0 0xff>;
+ num-viewport = <16>;
+ max-link-speed = <2>;
+ dma-coherent;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+ msi-map = <0x0 &gic_its 0x10000 0x10000>;
+ };
+
+ pcie1_ep: pcie-ep@5600000 {
+ compatible = "ti,am654-pcie-ep";
+ reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
+ reg-names = "app", "dbics", "addr_space", "atu";
+ power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
+ ti,syscon-pcie-mode = <&pcie1_mode>;
+ num-ib-windows = <16>;
+ num-ob-windows = <16>;
+ max-link-speed = <2>;
+ dma-coherent;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ mcasp0: mcasp@2b00000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b00000 0x0 0x2000>,
+ <0x0 0x02b08000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 104 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ mcasp1: mcasp@2b10000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b10000 0x0 0x2000>,
+ <0x0 0x02b18000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 105 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ mcasp2: mcasp@2b20000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b20000 0x0 0x2000>,
+ <0x0 0x02b28000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 106 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ cal: cal@6f03000 {
+ compatible = "ti,am654-cal";
+ reg = <0x0 0x06f03000 0x0 0x400>,
+ <0x0 0x06f03800 0x0 0x40>;
+ reg-names = "cal_top",
+ "cal_rx_core0";
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ ti,camerrx-control = <&scm_conf 0x40c0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 2 0>;
+ power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+ reg = <0>;
+ };
+ };
+ };
+
+ dss: dss@4a00000 {
+ compatible = "ti,am65x-dss";
+ reg = <0x0 0x04a00000 0x0 0x1000>, /* common */
+ <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */
+ <0x0 0x04a06000 0x0 0x1000>, /* vid */
+ <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
+ <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
+ <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
+ <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
+ reg-names = "common", "vidl1", "vid",
+ "ovr1", "ovr2", "vp1", "vp2";
+
+ ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+
+ power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+
+ clocks = <&k3_clks 67 1>,
+ <&k3_clks 216 1>,
+ <&k3_clks 67 2>;
+ clock-names = "fck", "vp1", "vp2";
+
+ /*
+ * Set vp2 clk (DPI_1_IN_CLK) mux to PLL4 via
+ * DIV1. See "Figure 12-3365. DSS Integration"
+ * in AM65x TRM for details.
+ */
+ assigned-clocks = <&k3_clks 67 2>;
+ assigned-clock-parents = <&k3_clks 67 5>;
+
+ interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+
+ dma-coherent;
+
+ dss_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ ehrpwm0: pwm@3000000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x3000000 0x0 0x100>;
+ power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 0>, <&k3_clks 40 0>;
+ clock-names = "tbclk", "fck";
+ };
+
+ ehrpwm1: pwm@3010000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x3010000 0x0 0x100>;
+ power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 1>, <&k3_clks 41 0>;
+ clock-names = "tbclk", "fck";
+ };
+
+ ehrpwm2: pwm@3020000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x3020000 0x0 0x100>;
+ power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 2>, <&k3_clks 42 0>;
+ clock-names = "tbclk", "fck";
+ };
+
+ ehrpwm3: pwm@3030000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x3030000 0x0 0x100>;
+ power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 3>, <&k3_clks 43 0>;
+ clock-names = "tbclk", "fck";
+ };
+
+ ehrpwm4: pwm@3040000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x3040000 0x0 0x100>;
+ power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 4>, <&k3_clks 44 0>;
+ clock-names = "tbclk", "fck";
+ };
+
+ ehrpwm5: pwm@3050000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x3050000 0x0 0x100>;
+ power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 5>, <&k3_clks 45 0>;
+ clock-names = "tbclk", "fck";
};
};
diff --git a/arch/arm/dts/k3-am65-mcu.dtsi b/arch/arm/dts/k3-am65-mcu.dtsi
index 84c8f34..7454c8c 100644
--- a/arch/arm/dts/k3-am65-mcu.dtsi
+++ b/arch/arm/dts/k3-am65-mcu.dtsi
@@ -2,11 +2,11 @@
/*
* Device Tree Source for AM6 SoC Family MCU Domain peripherals
*
- * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
*/
&cbass_mcu {
- mcu_conf: scm_conf@40f00000 {
+ mcu_conf: scm-conf@40f00000 {
compatible = "syscon", "simple-mfd";
reg = <0x0 0x40f00000 0x0 0x20000>;
#address-cells = <1>;
@@ -28,6 +28,15 @@
interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
current-speed = <115200>;
+ power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ mcu_ram: sram@41c00000 {
+ compatible = "mmio-sram";
+ reg = <0x00 0x41c00000 0x00 0x80000>;
+ ranges = <0x0 0x00 0x41c00000 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
};
mcu_i2c0: i2c@40b00000 {
@@ -41,41 +50,114 @@
power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
};
- mcu_r5fss0: r5fss@41000000 {
- compatible = "ti,am654-r5fss";
- ti,cluster-mode = <0>;
+ mcu_spi0: spi@40300000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x0 0x40300000 0x0 0x400>;
+ interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 142 1>;
+ power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x41000000 0x00 0x41000000 0x20000>,
- <0x41400000 0x00 0x41400000 0x20000>;
- power-domains = <&k3_pds 129 TI_SCI_PD_EXCLUSIVE>;
+ #size-cells = <0>;
+ };
- mcu_r5fss0_core0: r5f@41000000 {
- compatible = "ti,am654-r5f";
- reg = <0x41000000 0x00008000>,
- <0x41010000 0x00008000>;
- reg-names = "atcm", "btcm";
+ mcu_spi1: spi@40310000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x0 0x40310000 0x0 0x400>;
+ interrupts = <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 143 1>;
+ power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mcu_spi2: spi@40320000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x0 0x40320000 0x0 0x400>;
+ interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 144 1>;
+ power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ tscadc0: tscadc@40200000 {
+ compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
+ reg = <0x0 0x40200000 0x0 0x1000>;
+ interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 0 2>;
+ assigned-clocks = <&k3_clks 0 2>;
+ assigned-clock-rates = <60000000>;
+ clock-names = "adc_tsc_fck";
+ dmas = <&mcu_udmap 0x7100>,
+ <&mcu_udmap 0x7101 >;
+ dma-names = "fifo0", "fifo1";
+
+ adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am654-adc", "ti,am3359-adc";
+ };
+ };
+
+ tscadc1: tscadc@40210000 {
+ compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
+ reg = <0x0 0x40210000 0x0 0x1000>;
+ interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 1 2>;
+ assigned-clocks = <&k3_clks 1 2>;
+ assigned-clock-rates = <60000000>;
+ clock-names = "adc_tsc_fck";
+ dmas = <&mcu_udmap 0x7102>,
+ <&mcu_udmap 0x7103>;
+ dma-names = "fifo0", "fifo1";
+
+ adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am654-adc", "ti,am3359-adc";
+ };
+ };
+
+ mcu-navss {
+ compatible = "simple-mfd";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ dma-coherent;
+ dma-ranges;
+
+ ti,sci-dev-id = <119>;
+
+ mcu_ringacc: ringacc@2b800000 {
+ compatible = "ti,am654-navss-ringacc";
+ reg = <0x0 0x2b800000 0x0 0x400000>,
+ <0x0 0x2b000000 0x0 0x400000>,
+ <0x0 0x28590000 0x0 0x100>,
+ <0x0 0x2a500000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ ti,num-rings = <286>;
+ ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
ti,sci = <&dmsc>;
- ti,sci-dev-id = <159>;
- ti,sci-proc-ids = <0x01 0xFF>;
- resets = <&k3_reset 159 1>;
- ti,atcm-enable = <1>;
- ti,btcm-enable = <1>;
- ti,loczrama = <1>;
+ ti,sci-dev-id = <195>;
+ msi-parent = <&inta_main_udmass>;
};
- mcu_r5fss0_core1: r5f@41400000 {
- compatible = "ti,am654-r5f";
- reg = <0x41400000 0x00008000>,
- <0x41410000 0x00008000>;
- reg-names = "atcm", "btcm";
+ mcu_udmap: dma-controller@285c0000 {
+ compatible = "ti,am654-navss-mcu-udmap";
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x2aa00000 0x0 0x40000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt";
+ msi-parent = <&inta_main_udmass>;
+ #dma-cells = <1>;
+
ti,sci = <&dmsc>;
- ti,sci-dev-id = <245>;
- ti,sci-proc-ids = <0x02 0xFF>;
- resets = <&k3_reset 245 1>;
- ti,atcm-enable = <1>;
- ti,btcm-enable = <1>;
- ti,loczrama = <1>;
+ ti,sci-dev-id = <194>;
+ ti,ringacc = <&mcu_ringacc>;
+
+ ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
+ <0xd>; /* TX_CHAN */
+ ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
+ <0xa>; /* RX_CHAN */
+ ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
};
};
@@ -117,50 +199,6 @@
};
};
- mcu_navss {
- compatible = "simple-mfd";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- dma-coherent;
- dma-ranges;
-
- ti,sci-dev-id = <119>;
-
- mcu_ringacc: ringacc@2b800000 {
- compatible = "ti,am654-navss-ringacc";
- reg = <0x0 0x2b800000 0x0 0x400000>,
- <0x0 0x2b000000 0x0 0x400000>,
- <0x0 0x28590000 0x0 0x100>,
- <0x0 0x2a500000 0x0 0x40000>;
- reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
- ti,num-rings = <286>;
- ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
- ti,dma-ring-reset-quirk;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <195>;
- };
-
- mcu_udmap: dma-controller@285c0000 {
- compatible = "ti,am654-navss-mcu-udmap";
- reg = <0x0 0x285c0000 0x0 0x100>,
- <0x0 0x2a800000 0x0 0x40000>,
- <0x0 0x2aa00000 0x0 0x40000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
- #dma-cells = <1>;
-
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <194>;
- ti,ringacc = <&mcu_ringacc>;
-
- ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
- <0xd>; /* TX_CHAN */
- ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
- <0xa>; /* RX_CHAN */
- ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
- };
- };
-
mcu_cpsw: ethernet@46000000 {
compatible = "ti,am654-cpsw-nuss";
#address-cells = <2>;
@@ -231,12 +269,43 @@
};
};
- mcu_rti1: rti@40610000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x0 0x40610000 0x0 0x100>;
- clocks = <&k3_clks 135 0>;
- power-domains = <&k3_pds 135 TI_SCI_PD_SHARED>;
- assigned-clocks = <&k3_clks 135 0>;
- assigned-clock-parents = <&k3_clks 135 4>;
+ mcu_r5fss0: r5fss@41000000 {
+ compatible = "ti,am654-r5fss";
+ ti,cluster-mode = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x41000000 0x00 0x41000000 0x20000>,
+ <0x41400000 0x00 0x41400000 0x20000>;
+ power-domains = <&k3_pds 129 TI_SCI_PD_EXCLUSIVE>;
+
+ mcu_r5fss0_core0: r5f@41000000 {
+ compatible = "ti,am654-r5f";
+ reg = <0x41000000 0x00008000>,
+ <0x41010000 0x00008000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <159>;
+ ti,sci-proc-ids = <0x01 0xff>;
+ resets = <&k3_reset 159 1>;
+ firmware-name = "am65x-mcu-r5f0_0-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+
+ mcu_r5fss0_core1: r5f@41400000 {
+ compatible = "ti,am654-r5f";
+ reg = <0x41400000 0x00008000>,
+ <0x41410000 0x00008000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <245>;
+ ti,sci-proc-ids = <0x02 0xff>;
+ resets = <&k3_reset 245 1>;
+ firmware-name = "am65x-mcu-r5f0_1-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
};
};
diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi b/arch/arm/dts/k3-am65-wakeup.dtsi
index 666c30d..ed42f13 100644
--- a/arch/arm/dts/k3-am65-wakeup.dtsi
+++ b/arch/arm/dts/k3-am65-wakeup.dtsi
@@ -2,7 +2,7 @@
/*
* Device Tree Source for AM6 SoC Family Wakeup Domain peripherals
*
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
*/
&cbass_wakeup {
@@ -34,7 +34,12 @@
};
};
- wkup_pmx0: pinmux@4301c000 {
+ chipid@43000014 {
+ compatible = "ti,am654-chipid";
+ reg = <0x43000014 0x4>;
+ };
+
+ wkup_pmx0: pinctrl@4301c000 {
compatible = "pinctrl-single";
reg = <0x4301c000 0x118>;
#pinctrl-cells = <1>;
@@ -50,6 +55,7 @@
interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
+ power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
};
wkup_i2c0: i2c@42120000 {
@@ -63,8 +69,40 @@
power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
};
- chipid: chipid@43000014 {
- compatible = "ti,am654-chipid";
- reg = <0x43000014 0x4>;
+ intr_wkup_gpio: interrupt-controller2 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <1>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <156>;
+ ti,interrupt-ranges = <0 712 16>;
+ };
+
+ wkup_gpio0: gpio@42110000 {
+ compatible = "ti,am654-gpio", "ti,keystone-gpio";
+ reg = <0x42110000 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&intr_wkup_gpio>;
+ interrupts = <60>, <61>, <62>, <63>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <56>;
+ ti,davinci-gpio-unbanked = <0>;
+ clocks = <&k3_clks 59 0>;
+ clock-names = "gpio";
+ };
+
+ wkup_vtm0: temperature-sensor@42050000 {
+ compatible = "ti,am654-vtm";
+ reg = <0x42050000 0x25c>;
+ power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal_zones: thermal-zones {
+ #include "k3-am654-industrial-thermal.dtsi"
};
};
diff --git a/arch/arm/dts/k3-am65.dtsi b/arch/arm/dts/k3-am65.dtsi
index 4d6d196..d84c0bc 100644
--- a/arch/arm/dts/k3-am65.dtsi
+++ b/arch/arm/dts/k3-am65.dtsi
@@ -2,7 +2,7 @@
/*
* Device Tree Source for AM6 SoC Family
*
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
*/
#include <dt-bindings/gpio/gpio.h>
@@ -30,8 +30,7 @@
i2c3 = &main_i2c1;
i2c4 = &main_i2c2;
i2c5 = &main_i2c3;
- spi0 = &ospi0;
- spi1 = &ospi1;
+ ethernet0 = &cpsw_port1;
};
chosen { };
@@ -71,13 +70,15 @@
<0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
<0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
<0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
+ <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* MSMC SRAM */
<0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
/* MCUSS Range */
<0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
<0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
- <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+ <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
<0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
<0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+ <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>,
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
@@ -96,6 +97,7 @@
<0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
<0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
<0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+ <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index b030d75..b0602d1 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -16,21 +16,27 @@
ethernet0 = &cpsw_port1;
usb0 = &usb0;
usb1 = &usb1;
+ spi0 = &ospi0;
+ spi1 = &ospi1;
};
};
&cbass_main{
u-boot,dm-spl;
+ main-navss {
+ u-boot,dm-spl;
+ };
};
&cbass_mcu {
u-boot,dm-spl;
- mcu_navss {
+ mcu-navss {
u-boot,dm-spl;
ringacc@2b800000 {
u-boot,dm-spl;
+ ti,dma-ring-reset-quirk;
};
dma-controller@285c0000 {
@@ -41,6 +47,10 @@
&cbass_wakeup {
u-boot,dm-spl;
+
+ chipid@43000014 {
+ u-boot,dm-spl;
+ };
};
&secure_proxy_main {
@@ -77,16 +87,6 @@
&main_pmx0 {
u-boot,dm-spl;
- main_uart0_pins_default: main_uart0_pins_default {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */
- AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */
- AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */
- AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */
- >;
- u-boot,dm-spl;
- };
-
usb0_pins_default: usb0_pins_default {
pinctrl-single,pins = <
AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
@@ -95,35 +95,15 @@
};
};
+&main_uart0_pins_default {
+ u-boot,dm-spl;
+};
+
&main_pmx1 {
u-boot,dm-spl;
};
&wkup_pmx0 {
- mcu_cpsw_pins_default: mcu_cpsw_pins_default {
- pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
- AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
- AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */
- AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */
- AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */
- AM65X_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */
- AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */
- AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
- AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
- AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
- AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */
- AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
- >;
- };
-
- mcu_mdio_pins_default: mcu_mdio1_pins_default {
- pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
- AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
- >;
- };
-
mcu-fss0-ospi0-pins-default {
u-boot,dm-spl;
};
@@ -131,9 +111,6 @@
&main_uart0 {
u-boot,dm-spl;
- pinctrl-names = "default";
- pinctrl-0 = <&main_uart0_pins_default>;
- status = "okay";
};
&main_mmc0_pins_default {
@@ -152,11 +129,6 @@
u-boot,dm-spl;
};
-&mcu_cpsw {
- pinctrl-names = "default";
- pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
-};
-
&davinci_mdio {
phy0: ethernet-phy@0 {
reg = <0>;
@@ -166,11 +138,6 @@
};
};
-&cpsw_port1 {
- phy-mode = "rgmii-rxid";
- phy-handle = <&phy0>;
-};
-
&mcu_cpsw {
reg = <0x0 0x46000000 0x0 0x200000>,
<0x0 0x40f00200 0x0 0x2>;
@@ -204,10 +171,6 @@
};
};
-&chipid {
- u-boot,dm-spl;
-};
-
&dwc3_0 {
status = "okay";
u-boot,dm-spl;
diff --git a/arch/arm/dts/k3-am654-base-board.dts b/arch/arm/dts/k3-am654-base-board.dts
index 830526a..7b2cdaf 100644
--- a/arch/arm/dts/k3-am654-base-board.dts
+++ b/arch/arm/dts/k3-am654-base-board.dts
@@ -1,12 +1,13 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
*/
/dts-v1/;
#include "k3-am654.dtsi"
-#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
/ {
compatible = "ti,am654-evm", "ti,am654";
@@ -17,11 +18,6 @@
bootargs = "earlycon=ns16550a,mmio32,0x02800000";
};
- aliases {
- remoteproc0 = &mcu_r5fss0_core0;
- remoteproc1 = &mcu_r5fss0_core1;
- };
-
memory@80000000 {
device_type = "memory";
/* 4G RAM */
@@ -33,48 +29,139 @@
#address-cells = <2>;
#size-cells = <2>;
ranges;
- secure_ddr: secure_ddr@9e800000 {
+
+ secure_ddr: secure-ddr@9e800000 {
reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
alignment = <0x1000>;
no-map;
};
+
+ mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa0000000 0 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa0100000 0 0xf00000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa1000000 0 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa1100000 0 0xf00000>;
+ no-map;
+ };
+
+ rtos_ipc_memory_region: ipc-memories@a2000000 {
+ reg = <0x00 0xa2000000 0x00 0x00100000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&push_button_pins_default>;
+
+ sw5 {
+ label = "GPIO Key USER1";
+ linux,code = <BTN_0>;
+ gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+
+ sw6 {
+ label = "GPIO Key USER2";
+ linux,code = <BTN_1>;
+ gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ clk_ov5640_fixed: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+};
+
+&wkup_pmx0 {
+ wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
+ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
+ >;
+ };
+
+ push_button_pins_default: push-button-pins-default {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */
+ AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
+ >;
+ };
+
+ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
+ AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */
+ AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */
+ AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */
+ AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */
+ AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */
+ AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */
+ AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */
+ AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */
+ AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */
+ AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
+ >;
+ };
+
+ wkup_pca554_default: wkup-pca554-default {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
+ >;
+ };
+
+ mcu_cpsw_pins_default: mcu-cpsw-pins-default {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
+ AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
+ AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */
+ AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */
+ AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */
+ AM65X_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */
+ AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */
+ AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
+ AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
+ AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
+ AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */
+ AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
+ >;
+ };
+
+ mcu_mdio_pins_default: mcu-mdio1-pins-default {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
+ AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
+ >;
};
};
&main_pmx0 {
- main_mmc0_pins_default: main_mmc0_pins_default {
+ main_uart0_pins_default: main-uart0-pins-default {
pinctrl-single,pins = <
- AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
- AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
- AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
- AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
- AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
- AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
- AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
- AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
- AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
- AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
- AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */
- AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
- >;
- };
-
- main_mmc1_pins_default: main_mmc1_pins_default {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
- AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
- AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */
- AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */
- AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */
- AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */
- AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */
- AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */
- >;
- };
-
- usb1_pins_default: usb1_pins_default {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
+ AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */
+ AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */
+ AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */
+ AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */
>;
};
@@ -84,6 +171,51 @@
AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */
>;
};
+
+ main_spi0_pins_default: main-spi0-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */
+ AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */
+ AM65X_IOPAD(0x01cc, PIN_INPUT, 0) /* (AD13) SPI0_D1 */
+ AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */
+ >;
+ };
+
+ main_mmc0_pins_default: main-mmc0-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
+ AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
+ AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
+ AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
+ AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
+ AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
+ AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
+ AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
+ AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
+ AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
+ AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */
+ AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
+ >;
+ };
+
+ main_mmc1_pins_default: main-mmc1-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
+ AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
+ AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */
+ AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */
+ AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */
+ AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */
+ AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */
+ AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */
+ >;
+ };
+
+ usb1_pins_default: usb1-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
+ >;
+ };
};
&main_pmx1 {
@@ -100,52 +232,23 @@
AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */
>;
};
-};
-&wkup_pmx0 {
- wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+ ecap0_pins_default: ecap0-pins-default {
pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
- AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
- >;
- };
-
- mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default {
- pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
- AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */
- AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */
- AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */
- AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */
- AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */
- AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */
- AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */
- AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */
- AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */
- AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
+ AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */
>;
};
};
-&sdhci0 {
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc0_pins_default>;
- bus-width = <8>;
- non-removable;
- ti,driver-strength-ohm = <50>;
+&wkup_uart0 {
+ /* Wakeup UART is used by System firmware */
+ status = "reserved";
};
-/*
- * Because of erratas i2025 and i2026 for silicon revision 1.0, the
- * SD card interface might fail. Boards with sr1.0 are recommended to
- * disable sdhci1
- */
-&sdhci1 {
+&main_uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
- sdhci-caps-mask = <0x7 0x0>;
- disable-wp;
+ pinctrl-0 = <&main_uart0_pins_default>;
+ power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
};
&wkup_i2c0 {
@@ -153,11 +256,17 @@
pinctrl-0 = <&wkup_i2c0_pins_default>;
clock-frequency = <400000>;
- tca9554: gpio@38 {
+ pca9554: gpio@39 {
compatible = "nxp,pca9554";
- reg = <0x38>;
+ reg = <0x39>;
gpio-controller;
#gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_pca554_default>;
+ interrupt-parent = <&wkup_gpio0>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
};
@@ -178,6 +287,23 @@
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
+
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2_phy0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
};
&main_i2c2 {
@@ -186,12 +312,49 @@
clock-frequency = <400000>;
};
-&dwc3_1 {
- status = "okay";
+&ecap0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins_default>;
};
-&usb1_phy {
- status = "okay";
+&main_spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_spi0_pins_default>;
+ #address-cells = <1>;
+ #size-cells= <0>;
+ ti,pindir-d0-out-d1-in = <1>;
+
+ flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
+ spi-max-frequency = <48000000>;
+ #address-cells = <1>;
+ #size-cells= <1>;
+ };
+};
+
+&sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc0_pins_default>;
+ bus-width = <8>;
+ non-removable;
+ ti,driver-strength-ohm = <50>;
+ disable-wp;
+};
+
+/*
+ * Because of erratas i2025 and i2026 for silicon revision 1.0, the
+ * SD card interface might fail. Boards with sr1.0 are recommended to
+ * disable sdhci1
+ */
+&sdhci1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc1_pins_default>;
+ ti,driver-strength-ohm = <50>;
+ sdhci-caps-mask = <0x7 0x0>;
+ disable-wp;
};
&usb1 {
@@ -208,6 +371,112 @@
status = "disabled";
};
+&tscadc0 {
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
+&tscadc1 {
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
+&serdes0 {
+ status = "disabled";
+};
+
+&serdes1 {
+ status = "disabled";
+};
+
+&pcie0_rc {
+ status = "disabled";
+};
+
+&pcie0_ep {
+ status = "disabled";
+};
+
+&pcie1_rc {
+ status = "disabled";
+};
+
+&pcie1_ep {
+ status = "disabled";
+};
+
+&mailbox0_cluster0 {
+ interrupts = <436>;
+
+ mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+ ti,mbox-tx = <1 0 0>;
+ ti,mbox-rx = <0 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ interrupts = <432>;
+
+ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+ ti,mbox-tx = <1 0 0>;
+ ti,mbox-rx = <0 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ status = "disabled";
+};
+
+&mailbox0_cluster3 {
+ status = "disabled";
+};
+
+&mailbox0_cluster4 {
+ status = "disabled";
+};
+
+&mailbox0_cluster5 {
+ status = "disabled";
+};
+
+&mailbox0_cluster6 {
+ status = "disabled";
+};
+
+&mailbox0_cluster7 {
+ status = "disabled";
+};
+
+&mailbox0_cluster8 {
+ status = "disabled";
+};
+
+&mailbox0_cluster9 {
+ status = "disabled";
+};
+
+&mailbox0_cluster10 {
+ status = "disabled";
+};
+
+&mailbox0_cluster11 {
+ status = "disabled";
+};
+
+&mcu_r5fss0_core0 {
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+ mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+};
+
+&mcu_r5fss0_core1 {
+ memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+ <&mcu_r5fss0_core1_memory_region>;
+ mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+};
+
&ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
@@ -217,7 +486,7 @@
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <8>;
- spi-max-frequency = <50000000>;
+ spi-max-frequency = <40000000>;
cdns,tshsl-ns = <60>;
cdns,tsd2d-ns = <60>;
cdns,tchsh-ns = <60>;
@@ -227,3 +496,45 @@
#size-cells = <1>;
};
};
+
+&csi2_0 {
+ csi2_phy0: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+};
+
+&mcu_cpsw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
+
+&cpsw_port1 {
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&phy0>;
+};
+
+&mcasp0 {
+ status = "disabled";
+};
+
+&mcasp1 {
+ status = "disabled";
+};
+
+&mcasp2 {
+ status = "disabled";
+};
+
+&dss {
+ status = "disabled";
+};
diff --git a/arch/arm/dts/k3-am654-industrial-thermal.dtsi b/arch/arm/dts/k3-am654-industrial-thermal.dtsi
new file mode 100644
index 0000000..9021c73
--- /dev/null
+++ b/arch/arm/dts/k3-am654-industrial-thermal.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+mpu0_thermal: mpu0-thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <500>; /* milliseconds */
+ thermal-sensors = <&wkup_vtm0 0>;
+
+ trips {
+ mpu0_crit: mpu0-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+};
+
+mpu1_thermal: mpu1-thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <500>; /* milliseconds */
+ thermal-sensors = <&wkup_vtm0 1>;
+
+ trips {
+ mpu1_crit: mpu1-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+};
+
+mcu_thermal: mcu-thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <500>; /* milliseconds */
+ thermal-sensors = <&wkup_vtm0 2>;
+
+ trips {
+ mcu_crit: mcu-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+};
diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts
index e0f2d17..087a3bb 100644
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -77,6 +77,10 @@
};
};
+&wkup_gpio0 {
+ u-boot,dm-spl;
+};
+
&cbass_wakeup {
sysctrler: sysctrler {
compatible = "ti,am654-system-controller";
@@ -85,25 +89,6 @@
u-boot,dm-spl;
};
- wkup_gpio0: wkup_gpio0@42110000 {
- compatible = "ti,k2g-gpio", "ti,keystone-gpio";
- reg = <0x42110000 0x100>;
- gpio-controller;
- #gpio-cells = <2>;
- ti,ngpio = <56>;
- ti,davinci-gpio-unbanked = <0>;
- clocks = <&k3_clks 59 0>;
- clock-names = "gpio";
- u-boot,dm-spl;
- };
-
- wkup_vtm0: wkup_vtm@42050000 {
- compatible = "ti,am654-vtm", "ti,am654-avs";
- reg = <0x42050000 0x25c>;
- power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
- #thermal-sensor-cells = <1>;
- };
-
clk_200mhz: dummy_clock {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -131,14 +116,19 @@
pinctrl-names = "default";
pinctrl-0 = <&mcu_uart0_pins_default>;
clock-frequency = <48000000>;
+ /delete-property/ power-domains;
status = "okay";
};
&main_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_uart0_pins_default>;
power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+ status = "okay";
};
&wkup_vtm0 {
+ compatible = "ti,am654-vtm", "ti,am654-avs";
vdd-supply-3 = <&vdd_mpu>;
vdd-supply-4 = <&vdd_mpu>;
u-boot,dm-spl;
@@ -199,6 +189,16 @@
&main_pmx0 {
u-boot,dm-spl;
+ main_uart0_pins_default: main-uart0-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */
+ AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */
+ AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */
+ AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */
+ >;
+ u-boot,dm-spl;
+ };
+
main_mmc0_pins_default: main_mmc0_pins_default {
pinctrl-single,pins = <
AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
diff --git a/arch/arm/dts/k3-am654.dtsi b/arch/arm/dts/k3-am654.dtsi
index 2affa6f..f0a6541 100644
--- a/arch/arm/dts/k3-am654.dtsi
+++ b/arch/arm/dts/k3-am654.dtsi
@@ -2,7 +2,7 @@
/*
* Device Tree Source for AM6 SoC family in Quad core configuration
*
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
*/
#include "k3-am65.dtsi"
@@ -34,7 +34,7 @@
};
cpu0: cpu@0 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x000>;
device_type = "cpu";
enable-method = "psci";
@@ -48,7 +48,7 @@
};
cpu1: cpu@1 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x001>;
device_type = "cpu";
enable-method = "psci";
@@ -62,7 +62,7 @@
};
cpu2: cpu@100 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x100>;
device_type = "cpu";
enable-method = "psci";
@@ -76,7 +76,7 @@
};
cpu3: cpu@101 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x101>;
device_type = "cpu";
enable-method = "psci";