arm: dts: lx2160a: Add FSPI node properties
Align flexspi node properties with linux device-tree properties
Tested on LX2160A-RDB
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts
index 46a9239..e542c69 100644
--- a/arch/arm/dts/fsl-lx2160a-rdb.dts
+++ b/arch/arm/dts/fsl-lx2160a-rdb.dts
@@ -16,7 +16,9 @@
/ {
model = "NXP Layerscape LX2160ARDB Board";
compatible = "fsl,lx2160ardb", "fsl,lx2160a";
-
+ aliases {
+ spi0 = &fspi;
+ };
};
&esdhc0 {
@@ -28,6 +30,26 @@
mmc-hs200-1_8v;
};
+&fspi {
+ status = "okay";
+
+ mt35xu512aba0: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+
+ mt35xu512aba1: flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <1>;
+ };
+};
+
&i2c0 {
status = "okay";
u-boot,dm-pre-reloc;
diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi
index 9d018ca..42ce437 100644
--- a/arch/arm/dts/fsl-lx2160a.dtsi
+++ b/arch/arm/dts/fsl-lx2160a.dtsi
@@ -6,6 +6,8 @@
*
*/
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
/ {
compatible = "fsl,lx2160a";
interrupt-parent = <&gic>;
@@ -49,6 +51,19 @@
<1 10 0x8>; /* Hypervisor PPI, active-low */
};
+ fspi: flexspi@20c0000 {
+ compatible = "nxp,lx2160a-fspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "fspi_en", "fspi";
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c0: i2c@2000000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;