powerpc: T1024: Remove macro CONFIG_PPC_T1024
Replace CONFIG_PPC_T1024 with ARCH_T1024 in Kconfig and clean up
existing macros.
Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 8e5461b..48447c9 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -191,6 +191,7 @@
config TARGET_T1024QDS
bool "Support T1024QDS"
+ select ARCH_T1024
select SUPPORT_SPL
select PHYS_64BIT
@@ -202,6 +203,7 @@
config TARGET_T1024RDB
bool "Support T1024RDB"
+ select ARCH_T1024
select SUPPORT_SPL
select PHYS_64BIT
@@ -358,6 +360,9 @@
config ARCH_T1023
bool
+config ARCH_T1024
+ bool
+
source "board/freescale/b4860qds/Kconfig"
source "board/freescale/bsc9131rdb/Kconfig"
source "board/freescale/bsc9132qds/Kconfig"
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 8988af1..574259c 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -54,7 +54,7 @@
obj-$(CONFIG_PPC_T1020) += t1040_ids.o
obj-$(CONFIG_PPC_T1022) += t1040_ids.o
obj-$(CONFIG_ARCH_T1023) += t1024_ids.o
-obj-$(CONFIG_PPC_T1024) += t1024_ids.o
+obj-$(CONFIG_ARCH_T1024) += t1024_ids.o
obj-$(CONFIG_PPC_T2080) += t2080_ids.o
obj-$(CONFIG_PPC_T2081) += t2080_ids.o
@@ -97,7 +97,7 @@
obj-$(CONFIG_PPC_T1020) += t1040_serdes.o
obj-$(CONFIG_PPC_T1022) += t1040_serdes.o
obj-$(CONFIG_ARCH_T1023) += t1024_serdes.o
-obj-$(CONFIG_PPC_T1024) += t1024_serdes.o
+obj-$(CONFIG_ARCH_T1024) += t1024_serdes.o
obj-$(CONFIG_PPC_T2080) += t2080_serdes.o
obj-$(CONFIG_PPC_T2081) += t2080_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index a6d5206..18333ce 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -206,7 +206,7 @@
defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
#define FM1_CLK_SEL 0xe0000000
#define FM1_CLK_SHIFT 29
-#elif defined(CONFIG_PPC_T1024) || defined(CONFIG_ARCH_T1023)
+#elif defined(CONFIG_ARCH_T1024) || defined(CONFIG_ARCH_T1023)
#define FM1_CLK_SEL 0x00000007
#define FM1_CLK_SHIFT 0
#else
@@ -216,7 +216,7 @@
#define FM1_CLK_SHIFT 26
#endif
#if !defined(CONFIG_FM_PLAT_CLK_DIV) || !defined(CONFIG_PME_PLAT_CLK_DIV)
-#if defined(CONFIG_PPC_T1024) || defined(CONFIG_ARCH_T1023)
+#if defined(CONFIG_ARCH_T1024) || defined(CONFIG_ARCH_T1023)
rcw_tmp = in_be32(&gur->rcwsr[15]) - 4;
#else
rcw_tmp = in_be32(&gur->rcwsr[7]);