commit e608f221c13943d88e86f44753e23668342c3df3
author Bryan Wu <bryan.wu@analog.com> Wed Dec 16 22:04:02 2009 -0500
committer Remy Bohmer <linux@bohmer.net> Sat Jan 09 10:25:09 2010 +0100
tree 1f1aaa9edfc854e119151ba91398afc98e09cf62
parent bc72a919e037782f64e3ac45c91bc60408e57e85

usb: musb: add support for Blackfin MUSB

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>

drivers/usb/musb/blackfin_usb.c

diff --git a/drivers/usb/musb/blackfin_usb.c b/drivers/usb/musb/blackfin_usb.c
new file mode 100644
index 0000000..38aceb2
--- /dev/null
+++ b/drivers/usb/musb/blackfin_usb.c
@@ -0,0 +1,143 @@
+/*
+ * Blackfin MUSB HCD (Host Controller Driver) for u-boot
+ *
+ * Copyright (c) 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+
+#include <usb.h>
+
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/usb.h>
+
+#include "musb_core.h"
+
+/* MUSB platform configuration */
+struct musb_config musb_cfg = {
+	.regs       = (struct musb_regs *)USB_FADDR,
+	.timeout    = 0x3FFFFFF,
+	.musb_speed = 0,
+};
+
+/*
+ * This function read or write data to endpoint fifo
+ * Blackfin use DMA polling method to avoid buffer alignment issues
+ *
+ * ep		- Endpoint number
+ * length	- Number of bytes to write to FIFO
+ * fifo_data	- Pointer to data buffer to be read/write
+ * is_write	- Flag for read or write
+ */
+void rw_fifo(u8 ep, u32 length, void *fifo_data, int is_write)
+{
+	struct bfin_musb_dma_regs *regs;
+	u32 val = (u32)fifo_data;
+
+	blackfin_dcache_flush_invalidate_range(fifo_data, fifo_data + length);
+
+	regs = (void *)USB_DMA_INTERRUPT;
+	regs += ep;
+
+	/* Setup DMA address register */
+	bfin_write16(&regs->addr_low, val);
+	SSYNC();
+
+	bfin_write16(&regs->addr_high, val >> 16);
+	SSYNC();
+
+	/* Setup DMA count register */
+	bfin_write16(&regs->count_low, length);
+	bfin_write16(&regs->count_high, 0);
+	SSYNC();
+
+	/* Enable the DMA */
+	val = (ep << 4) | DMA_ENA | INT_ENA;
+	if (is_write)
+		val |= DIRECTION;
+	bfin_write16(&regs->control, val);
+	SSYNC();
+
+	/* Wait for compelete */
+	while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << ep)))
+		continue;
+
+	/* acknowledge dma interrupt */
+	bfin_write_USB_DMA_INTERRUPT(1 << ep);
+	SSYNC();
+
+	/* Reset DMA */
+	bfin_write16(&regs->control, 0);
+	SSYNC();
+}
+
+void write_fifo(u8 ep, u32 length, void *fifo_data)
+{
+	rw_fifo(ep, length, fifo_data, 1);
+}
+
+void read_fifo(u8 ep, u32 length, void *fifo_data)
+{
+	rw_fifo(ep, length, fifo_data, 0);
+}
+
+
+/*
+ * CPU and board-specific MUSB initializations.  Aliased function
+ * signals caller to move on.
+ */
+static void __def_musb_init(void)
+{
+}
+void board_musb_init(void) __attribute__((weak, alias("__def_musb_init")));
+
+int musb_platform_init(void)
+{
+	/* board specific initialization */
+	board_musb_init();
+
+	if (ANOMALY_05000346) {
+		bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
+		SSYNC();
+	}
+
+	if (ANOMALY_05000347) {
+		bfin_write_USB_APHY_CNTRL(0x0);
+		SSYNC();
+	}
+
+	/* Configure PLL oscillator register */
+	bfin_write_USB_PLLOSC_CTRL(0x30a8);
+	SSYNC();
+
+	bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
+	SSYNC();
+
+	bfin_write_USB_EP_NI0_RXMAXP(64);
+	SSYNC();
+
+	bfin_write_USB_EP_NI0_TXMAXP(64);
+	SSYNC();
+
+	/* Route INTRUSB/INTR_RX/INTR_TX to USB_INT0*/
+	bfin_write_USB_GLOBINTR(0x7);
+	SSYNC();
+
+	bfin_write_USB_GLOBAL_CTL(GLOBAL_ENA | EP1_TX_ENA | EP2_TX_ENA |
+				EP3_TX_ENA | EP4_TX_ENA | EP5_TX_ENA |
+				EP6_TX_ENA | EP7_TX_ENA | EP1_RX_ENA |
+				EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
+				EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
+	SSYNC();
+
+	return 0;
+}
+
+/*
+ * This function performs Blackfin platform specific deinitialization for usb.
+*/
+void musb_platform_deinit(void)
+{
+}